Save this Search
     
Sort by:
  • Posted Date
Hiring Open
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 4h, 37m ago  |  Ends: 1d, 19h  |   2 Proposals
Need a BOQ take off for the handrail in this project. - Handrails = Total LM - Mount Bracket = Total Qty - Stainless Endcap = Total Qty - Stainless Corner = Total Qty - Stainless Splice joiner* = Total Qty Corner Guards = Total Qty *Stainless Splice joiner is needed every 3m on straight length of handrail. Let me know how long this will take you.
Category: Other - Engineering &...       

k****lt1
 [?]
Sign in to view client's details.
| k****lt1
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Sep 03, 2015  |  Ends: 4d, 21h  |   13 Proposals
The job involves converting two gerber files (to be provided) into the respective CAD files so that these PCB CAD files that can be edited. The gerber files were given for a reference layout of a electronic component application; unfortunately the existing layouts are not optimised for heat dissipation and the OEM will not supply the CAD files. Gerber File #1: Two layer boards (top and bottom); two traces only Gerber File #2: Four layers boards (top RF signal, RF signal ground, DC signal, DC signal ground); three RF traces; some DC traces. Deliverables of this project: 1. CAD files for the two PCB designs; 2. Check and verification of the gerber vs CAD output Please let me know if you are interested.
Category: CAD       
Skills: Altium Designer, Electronic Design       

J****510
 [?]
Sign in to view client's details.
| J****510
|    Hong Kong SAR, PRC
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 28, 2015  |  Ends: 6d, 14h  |   1 Proposal
in the attached paper, northern blot assay was done. Can you give me protocol for this northern blot in the paper?
Category: Chemical Engineering       

n****how
 [?]
Sign in to view client's details.
| n****how
|    Bangladesh
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 6d, 11h  |   38 Proposals
I've got a concept for a new electronic product, for which I would like some assistance building a functional prototype. This includes: - Initial review and feasibility - Electronic product design - Prototype design and construction Contact me with examples of your work and rate information. If you have any questions, let me know. Thank you.
Category: Electrical       

y****act
 [?]
Sign in to view client's details.
| y****act
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 6d, 8h  |   22 Proposals
Seeking a well experienced and well connected person in China or with connections in China who can help with sourcing 24 new products for our firm every month. Must have experience in souring and be able to do trust and background checks on vendors. Also must be able to find and locate vendors for specific products and negotiate samples and also negotiate rates. Must have good experience and also some references. Will pay hourly or by the project.
Category: Contract Manufacturing       

h****nce
 [?]
Sign in to view client's details.
| h****nce
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 6d, 3h  |   5 Proposals
We require a physics / laser expert to run some calculations and provide some reports for our device. Need to calculate energy density, dosage (this is a medical application) and total power for our existing laser (low power). Please provide your SkypeID so we can interview you.
Category: Electrical       
Skills: Electronics, Physics, Electrical Engineer, laser       

p****one
 [?]
Sign in to view client's details.
| p****one
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 5d, 13h  |   5 Proposals
We are an interior design company planning to launch an online shop which specializes in custom carpentry works for interior fixtures. We would like to invite creative designers to come up with designs for fixed size items like TV console, feature wall, bed frames, tables etc. We will be providing the standard sizes and materials to be applied to your design as items will be produced and sold by our company. We are offering a 5% fixed royalty fee on each submitted and approved design we put on sale on our website. Your profile will be featured on the product page of items designed by you. We only accept high quality 3D rendered images and original design. You may submitted as many products as you wish but is subjected to approval. Methods of production should be woodwork, metal or 3D printed. Other materials are permitted but subjected to approval.
Category: Interior Design       

v****ces
 [?]
Sign in to view client's details.
| v****ces *
|    Singapore
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Aug 27, 2015  |  Ends: 5d, 12h  |   3 Proposals
Looking for the Hi-Fi Engineer to design an Audio Hi-Fi VU meter with the Following requirements: 9.1 Independent Analog Input Channels, RCA, XLR, Banana, Etc 9.1 Vu Meters/leds ( 1 per input ) Can use a DSP for Functions Like: Input Level, Input Detect: Peak, RMS Dimmer Response Speed. Your Job here will be to design the Electronic Part using from the shelf Components, write code is a plus. NDA and Contract will be required, If interested please send your information for NDA. Project design Price to be determined
Category: CAD       

e****ico
 [?]
Sign in to view client's details.
| e****ico *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 5d, 10h  |   25 Proposals
We need a drawing of a curved wireframe that we've already drawn in autocad 3d to be plotted onto approximately (30) PDF full size plots ready to be printed in 1:1 scale on 36" paper. We will give you an autocad file and we need each section of frame to be rotated into a plan view and an elevation view and plotted as a pdf. Please give us an hourly rate an an estimate per finished PDF plot. Thanks for bidding!
Category: CAD       
Skills: 3D Modeling, AutoCAD       

L****ive
 [?]
Sign in to view client's details.
| L****ive
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 5d, 6h  |   3 Proposals
Start-up company needing services from ideation to production for a beach sandal company. Currently in the initial stages of the process. The beach sandal company will strive to be eco-friendly but fashion forward. We would like to utilize recycled products. We are looking to hire someone that has expertise in finding a manufacturer that fits our needs. We would like to manufacture in the USA.
Category: Product Design       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    United States
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: Aug 26, 2015  |  Ends: 5d, 4h  |   10 Proposals
Seeking a well qualified product development manager for a new product we are developing and will eventually manufacture. We are wanting to work with someone for a defined period of time. Most likely 6 months depending on the providers experience. The provider needs to be self motivating and willing to work between multiple teams and personality types. Good communication, organizational skills, and attention to detail are extremely important. Also, establish ambitious yet realistic deadlines and manage ongoing timelines and deliverables to hit those milestones. Provider needs to have experience with or managing the following areas: Industrial design Mechanical engineering PCB layout Electronic vendor component management. Roadmap development Program/firmware dev. for FPGA Offshore manufacturing Rapid Prototyping Project management. Battery and or power management. Ideally experience with the following: Optics or optical design. Image technology (such as sensors or image capture ...
Category: Contract Manufacturing       
Preferred Location: North America

c****b08
 [?]
Sign in to view client's details.
| c****b08
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Aug 26, 2015  |  Ends: 5d, 3h  |   3 Proposals
Require a project/experiment to be done in human head pose estimation, with kinect camera Using c++/opencv. Estimate the pitch/yaw/roll and perhaps display it. Any one related to computer vision welcome.
Category: Other - Engineering &...       
Skills: C++, OpenCV, Computer vision, Image Processing, Kinect       

k****akr
 [?]
Sign in to view client's details.
| k****akr
|    Ireland
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 5d, 0h  |   18 Proposals
We require structural calculations and drawings for Building Warrant of a building in Scotland. Full information will be provided by ourselves and the architect on the project, although a very quick turnaround is required. We initially require all calculations for sizes to be able to order beams and columns for the project and will subsequently require full building warrant drawings. The building is an extension to an existing premises and consists of two side walls and a rear wall. There are to be two flats above, sitting on a precast concrete slab. The sizes required urgently are those for the beams and columns which will be holding up the slab and roof. All drawings are copyright and remain the property of myself. The attached drawings are not to be used for any purpose other than tendering for the structural engineering services for this project.
Category: Civil & Structural       

r****145
 [?]
Sign in to view client's details.
| r****145 *
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 4d, 21h  |   4 Proposals
I need protocol of the attached paper minutely like lab manual and sourcing of reagents and equipments
Category: Chemical Engineering       
Skills: Biotechnology, Cell culture, Chem, Laboratory       

n****how
 [?]
Sign in to view client's details.
| n****how
|    Bangladesh
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 26, 2015  |  Ends: 4d, 21h  |   12 Proposals
Reinforced concrete detail drawing for raft foundation for extension to dwellinghouse, complete with rebar schedule and raft sections.
Category: Civil & Structural       

T****Eng
 [?]
Sign in to view client's details.
| T****Eng
|    Ireland
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 4d, 19h  |   4 Proposals
I require technical support via Skype and TeamViewer for the creation of a schematic and PCB layout in DipTrace ECAD. Excellent technical skills and a high level of proficiency in English required.
Category: Other - Engineering &...       

g****aul
 [?]
Sign in to view client's details.
| g****aul
|    Ireland
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: Aug 26, 2015  |  Ends: 4d, 15h  |   16 Proposals
Need a Civil Engineer or Land Surveyor who can provide simple corrections on the parcel "Final Map" er Town of Mammoth Lakes Surveyor "Comments" and who can later sign the map before is recorded.
Category: CAD       
Skills: Engineering drawing       
Preferred Location: United States

O****aLA
 [?]
Sign in to view client's details.
| O****aLA
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 25, 2015  |  Ends: 4d, 1h  |   3 Proposals
Hello, I have a client who has filed a patent on a simple drug and needs drug / pharmaceutical manufacturing. They developed a drug and need to have it manufactured. Preferably U.S. based manufacturing. Thank you.
Category: Chemical Engineering       
Skills: Manufacturing       

d****lia
 [?]
Sign in to view client's details.
| d****lia
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 25, 2015  |  Ends: 4d, 1h  |   14 Proposals
We are working on 3 bracelets in the shape of the US state 'Florida'. I labeled them A , B & C. I will send you the pictures with spec's. Thanks!
Category: CAD       
Skills: 3D Modeling       

s****dem
 [?]
Sign in to view client's details.
| s****dem
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 25, 2015  |  Ends: 4d, 0h  |   1 Proposal
Dear Sir or Madam, I am looking for a Houston area ONLY local engineering group or engineer to observe and supervise testing at my Houston (Spring Branch) facility of a door security product to ASTM F476 (latest ver. attached). The project would require: ? some minimal initial consultancy with a site visit to inspect the construction of the test assembly and go over test day particulars, ? a visit on the test day, supervision of the actual short test (est.1/2 Day), recording of results including a failure analysis (if applicable), and ? a written report on the test and its results. This is a fun quick test for which you may wish to be paid a flat rate. Or we can engage you hourly. There may be subsequent rounds of test work or other product design or CAD work depending on your skills. Thanks in advance for your consideration, Harper Jones JONES MANUFACTURING SERVICES LLC 1511 Bingle Rd. Ste D-8 Houston Texas 77055 713.392.6990   [obscured]  
Category: Product Design       

h****s69
 [?]
Sign in to view client's details.
| h****s69
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 25, 2015  |  Ends: 3d, 12h  |   7 Proposals
Must be CA-licensed. A custom home project, designed in Revit (Architecturals). Project has corresponding engineering plan in AutoCad. Would like to update/revise the engineering plan to reflect the changes that were made to the Architecturals (some of the walls shifted, some posts were moved, etc) There is also a Barn/Garage and connector portion of the project that has been designed but not yet engineered, so would need this done entirely. Goal is to read the structure... exposed timber rafters, outlookers, etc, but to make the hidden portions of the structure and 'lightweight/inexpensive' as possible (minimum number of hold-downs, TJI's instead of LVL's, little to no steel, etc).
Category: Architecture       

b****uer
 [?]
Sign in to view client's details.
| b****uer
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 24, 2015  |  Ends: 3d, 11h  |   43 Proposals
Looking for someone to use for the long term. We need steel shed and similar structures drawn up. We need presentation drawings for clients, drawings for engineers and workshop drawings. Currently have 1 size in our range and looking to greatly expand it and will be constantly adding to it. Having a system where roof sheets, purlins, rafters and brackets are already in there is a plus, so dont have to design each structure individually Prefer if use a program that would link with Solid edge as we use this in house to qualify i will need you to show examples of work you have done using rafters, purlin, roof sheet and bracketry of commercial structures
Category: Product Design       

d****cs1
 [?]
Sign in to view client's details.
| d****cs1
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Aug 24, 2015  |  Ends: 3d, 10h  |   4 Proposals
Hi, Are you specialised in energy storage system and have exposure in this field? We are looking for consultant who are well versed in this field and understand the complete supply chain for energy storage system from materials sourcing to project implementation. Danny
Category: Electrical       

d****enn
 [?]
Sign in to view client's details.
| d****enn
|    Malaysia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 24, 2015  |  Ends: 3d, 8h  |   5 Proposals
We need a focused training on Altium Designer in the area of PCB signal integrity analysis. Our licensed Altium expired on subscription. We need use the analysis to analyze the trace impedance. We need someone who can guide us through the tool.
Category: Electrical       
Preferred Location: United States

t****ded
 [?]
Sign in to view client's details.
| t****ded
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 24, 2015  |  Ends: 3d, 8h  |   28 Proposals
We are in need of a quick round of ID concepting for a vapor product that is about to be released. The product is modular, and the components that we will ask you to review will be flat plates. We are looking to add texture and break up the bland look, so you can design with CNC machining and plastic molding in mind. We will need the concepting turned around by the week's end. Our site is cloudmakertech.com - you can find the product images here. Please let me know of any questions.
Category: Product Design       

j****oce
 [?]
Sign in to view client's details.
| j****oce
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job