Save this Search
     
Sort by:
  • Posted Date
Payment Verified
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 3h, 21m ago  |  Ends: 14d, 19h  |   0 Proposals
we need a part time plc programmer and automation designer for industrial equipment. you must be available to visit the office in downtown toronto
Category: Electrical       

j****134
 [?]
Sign in to view client's details.
| j****134
|    Canada
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 3h, 47m ago  |  Ends: 14d, 19h  |   3 Proposals
Hello, I have a first draft of a prototype that I'm making for a dental application. The first draft is a 3ds file that is not to scale and is missing a few elements. The design itself is very simple. I have some engineering drawings of the device. What I need is someone who can make the exact changes to the 3d file with the correct scale and correct angles. It may require 3-4 revisions.
Category: 3D Modelling       
Skills: 3D, 3D Modeling, 3D Design       

z****win
 [?]
Sign in to view client's details.
| z****win
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 35m ago  |  Ends: 14d, 16h  |   3 Proposals
A 4,000 square food addition to an existing warehouse is being add. Would like recommendations on Mechanical, plumbing, and electrical systems. Drawings would also be required. Revit preferred, autocad acceptable, Its a plus if licensed in state of Illinois, United States
Category: Mechanical       
Preferred Location: United States

d****mek
 [?]
Sign in to view client's details.
| d****mek
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 53m ago  |  Ends: 14d, 16h  |   4 Proposals
A 4,000 square food addition to an existing warehouse is being add. Would like recommendations on footing, structure type, and roof type as well as complete structural drawings if necessary. Revit preferred, autocad acceptable, plus if licensed in Illinois, United States
Category: Architecture       
Preferred Location: United States

d****mek
 [?]
Sign in to view client's details.
| d****mek
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 10h, 1m ago  |  Ends: 14d, 12h  |   5 Proposals
I need structural design in steel for a community building according to BS code. Some of work has been done. I need it on weekend. Prferable in Stad Pro V. 8,0 or Etab Contact me ASAP
Category: Civil & Structural       

c****tuk
 [?]
Sign in to view client's details.
| c****tuk
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 20h, 12m ago  |  Ends: 14d, 2h  |   9 Proposals
I have a small building for police and fireman services that I need to have it divided into: Bottom floor (parking) and two floors of offices. It must include elevator, stairwell, etc. It needs some blocks to designate areas. example. bathrooms (toilets) If you give good price, you will also help complete the project, so quote fair price. May charge per hour, less than US$10. Will send scope of work if win bidding.
Category: Interior Design       
Skills: AutoCAD, Interior Design       

j****mon
 [?]
Sign in to view client's details.
| j****mon
|    Puerto Rico
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 21h, 27m ago  |  Ends: 14d, 1h  |   9 Proposals
We are looking for a person proficient in Siemens NX to created complicated geometry and assembly. We will supply design sketches and we need models, drawings and assembly. Knowledge of die casting is a plus but not necessary.
Category: 3D Modelling       
Skills: Siemens NX       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 21h, 36m ago  |  Ends: 2d, 2h  |   4 Proposals
I am developing a product and need a discussion with an EE to discuss an MP3 type device. Depending on the discussion I may need an EE to develop the 3D drawing of circuitry and help develop the prototype and cost out production. I would think the initial call would be an less than an hour, but I will pay an hourly fee. Great way to make a quick buck and get a good review.
Category: Electrical       
Preferred Location: North America

L****oup
 [?]
Sign in to view client's details.
| L****oup
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 21h, 43m ago  |  Ends: 14d, 1h  |   73 Proposals
Re Draw house plans in AUTOCAD. Draw floor plan and front elevation from scanned drawings. The drawings are old however most dimensions are visible.
Category: Architecture       
Skills: AutoCAD       

u****989
 [?]
Sign in to view client's details.
| u****989
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 22h, 36m ago  |  Ends: 14d, 0h  |   9 Proposals
I need a tutor for the next three years of my math courses which will include Pre-Calc(Which i am currently taking), Calc 1 and Calc 2. These will be in the upcoming semester. Currently, I am taking precalc and need a tutor for it but I will be happy to use you for my future classes if you can perform as required.
Category: Other - Engineering &...       

T****ger
 [?]
Sign in to view client's details.
| T****ger
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 02, 2015  |  Ends: 13d, 20h  |   8 Proposals
I am building a robotic lawn mower. Like many other robotic lawn mowers, this will likely use a perimeter wire to detect the edge of the lawn, but I am also interested in other approaches that could work here. This is a hourly job because I'm not yet sure what is possible, so would like to start with a feasibility analysis and go from there. The general milestones I expect for each approach are: 1. Discuss possibilities. 2. Agree to milestones. 3. A short summary of the trade-offs available. I'm mostly interested in the feasibility of the approach, the cost per unit, the power used, and how accurately we would be able to detect the edge of our cutting area. (1-2 pages.) 4. Agree to trade-offs. 5. A deep cost analysis of how much this would cost per unit and to develop. (1 page.) 6. A circuit design for this approach. 7. Any support (such as firmware) needed. 8. A PCB layout for this design. The system currently is using 6V batteries, and 5 volts for the electronics and is based...
Category: Electrical       

p****cts
 [?]
Sign in to view client's details.
| p****cts
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 02, 2015  |  Ends: 13d, 19h  |   2 Proposals
PROJECT ADDRESS: San Francisco, California REQUIREMENTS: Engineer license to practice in the State of California. AIA Architect. PROJECT SCOPE & PROGRAM: The project involves an addition to the existing two-unit flats. The lower unit at ground floor shall become a three-bedroom and two-bath unit with addition of two more bedrooms. The upper unit shall have four bedrooms and three baths. The total added areas shall be around 1,200- 1,400 square feet. The 3rd story shall be a master bedroom. SCHEDULE OF SERVICE: Architect shall perform the following basic services. A: Schematic design: based on Owner's program for Owner's reviews. Several schemes shall be presented to Owner. Note: Site measurements with existing building schematic shall be furnished. Rear set-back and height code requirements will be furnished. B: Design Development: The complete set of architectural drawings based on the agreed design scheme for Owner's reviews and approval. C: Construction Documentati...
Category: Civil & Structural       

s****rph
 [?]
Sign in to view client's details.
| s****rph
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 02, 2015  |  Ends: 13d, 16h  |   0 Proposals
We need something with optical design skills to design a small UV viewing device that attaches to a cell phone. The device will have a UV-pass / visible light blocking filter in front of a UV scintillation screen. A lens in front of the cell phone camera will focus on the screen. Skills in optics design software such as Zemax is a plus.
Category: Other - Engineering &...       
Skills: Zemax       

d****lyn
 [?]
Sign in to view client's details.
| d****lyn
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Mar 02, 2015  |  Ends: 13d, 16h  |   2 Proposals
I am looking to get a few things quoted before moving on to the actual development phase. First, here is a description of what I need... PRODUCT: Soundproof drum mat designed to significantly reduce decibel levels put out by an acoustic drum kit Main benefit: Achieve results of a soundproofed room in a drum mat (in other words, the highest level of soundproofing possible) DESCRIPTION: The idea was to develop a mat or platform that your entire drum kit would sit on. Measurements: 6 - 1/6 ' x 5' (length x width of my drum kit) Height / thickness doesn't matter and depends on the necessary layers of soundproofers needed to achieve the results Like standard drum mats it should be - Mobile - Easy to set up - Durable (in fact more durable than standard drum mats) - Protects drums - Slip proof (for you and your drums) Please see the product research I had done for more information, plausibility, and ideas. And please ask questions as needed. Before moving forward, please tell m...
Category: Product Design       

T****zur
 [?]
Sign in to view client's details.
| T****zur
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 02, 2015  |  Ends: 13d, 13h  |   4 Proposals
Need to generate structural calculations for aluminum windows curtain wall enclosures. Need to seal with New York state license. Describe your experience in the past to show similarity to this type of work. Provide cost. By sending a window layout with it's cross sections the engineer should review the profiles used if it's ok he should approve it, also the engineer should specify if the anchoring detail is good, what screw to use etc. Attached is a file to give an idea what i need.
Category: Civil & Structural       
Skills: AutoCAD       
Preferred Location: United States

M****gns
 [?]
Sign in to view client's details.
| M****gns
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 02, 2015  |  Ends: 13d, 13h  |   11 Proposals
Hi, We have two plans that we need the garden, interlock, sod, etc. areas taken off. Is this something that you would have time to do this week? Thanks
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

T****J_O
 [?]
Sign in to view client's details.
| T****J_O
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 02, 2015  |  Ends: 13d, 11h  |   5 Proposals
I need a CNC file - in Artcam for 2 countertop Bookmark displays. I am attaching photo and similar design drawing for Gift Cards. Bookmarks are 1.5" wide by 7" high. I need one display to hold 6 bookmarks and one display to hold 12. I would like the dividers NOT to protrude beyond the bottom faceplate so I can engrave or print on that piece. Material to be made from Standard 6mm Baltic Birch Plywood and fabricated with a CNC Router Please ask if you need more information
Category: Product Design       
Skills: 2D Design, CNC Programming       

w****rnh
 [?]
Sign in to view client's details.
| w****rnh
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Mar 02, 2015  |  Ends: 13d, 10h  |   33 Proposals
Hi Guys, I have re-posted this project in a different format due to not being able to obtain the appropriate freelancers previously. I require a suitably qualified and well experienced CAD/Solidworks etc etc designer to design custom plastic and injection moulded covers for us upon request. We currently have several products and material that we require a designer to put this into a design program and design our products also so as we can send these designs directly to the manufacturer to manufacture. This will be ongoing work and we require highly experienced freelancers and the work must be to the highest of quality and standards. Good luck bidding and look forward to getting this project rolling! Regards, Nick
Category: CAD       

N****089
 [?]
Sign in to view client's details.
| N****089
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 02, 2015  |  Ends: 13d, 10h  |   4 Proposals
Hello, I am looking for someone to help me formulate a nutritional supplement using some specific ingredients. I know which ingredients I want to use. These ingredients work well when given intravenously. However the ingredients have very poor bio-availability. They are broken down by digestive acids, and are not absorbed into the cells and therefore do not work when taken orally. I am looking for a pharmacist with specific knowledge in nano-formulation and bio-availability to help me formulate the ingredients in a way so that they DO work well orally. Hopefully you will have experience in managing product development / manufacturing of pharmaceutical, supplements and cosmetic products. If you have access to a LAB and materials, please also let me know, as this will give you a significant advantage for this project.
Category: Chemical Engineering       

m****z87
 [?]
Sign in to view client's details.
| m****z87
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Mar 01, 2015  |  Ends: 13d, 0h  |   6 Proposals
LOOKING FOR A TALENTED ARCHITECT FOR CAD AND PHOTOSHOP FINAL STUNNING PRESENTATION AND TECHNIQUES INFO WILL FOLLOW SEPARATELY
Category: CAD       

m****ano
 [?]
Sign in to view client's details.
| m****ano *
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 01, 2015  |  Ends: 13d, 0h  |   11 Proposals
Steel estimator for doing take off from tender drawings in structural steel package. This will include all hot rolled and cold rolled sections, holing, welding and connection details in a spread sheet. You should be able to detail and produce Tekla drawings. This is on ongoing role for the right person. Send your expressions of interest and hourly rate
Category: 3D Modelling       

h****ley
 [?]
Sign in to view client's details.
| h****ley
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 01, 2015  |  Ends: 4d, 21h  |   1 Proposal
Hello, I am a cosmetic product developer launching my own line of products. I will start with a set of color products for which I need assistance developing. Working with various skincare contract labs in my career, I am totally familiar with the the product development cycle. I work a full-time job, so what I am looking for is a chemist to do the initial development work, build formulas and create prototypes for my launch in June. At that point, if you have the capabilities to produce a small quantity of samples, we can work together on that. If not, I may take the formulas to a contract lab with a low minimum order. YOU MUST BE ADEPT WITH COLOR DEVELOPMENT. You are: -reliable -experienced in color chemistry -Familiar with the color product market Although my budget is limited in this phase of the project, we can discuss a price and timeline that works for both of us.
Category: Product Design       

a****uve
 [?]
Sign in to view client's details.
| a****uve
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 01, 2015  |  Ends: 12d, 20h  |   22 Proposals
Hello, and thank you for viewing my posting! I am acquiring a new home in a few weeks. The space is perfect for me, as the first floor, which is considered "basement" space, is ground level, and available for me to convert into office space. Upon this conversion, it will be a commercial space for me, and will contain my offices out back, and a new pet day care for dogs and cats in the front area. I currently rent office space, and will be looking to move my office space into my new home within a few weeks. I am posting this job in hopes of finding a skilled artist and creative mind to take some of my ideas and needs, and put them into visible renderings and concepts for me to build into reality. I will upload all current photos of the space/spaces with details and hand drawn floor plan (with basic measurements) into a public Google docs folder for you to view and utilize. The folder with all information for this project is now located at;   [obscured]  /...
Category: Interior Design       

d****scg
 [?]
Sign in to view client's details.
| d****scg
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 01, 2015  |  Ends: 12d, 18h  |   10 Proposals
I am seeking support for a concept involving the design and manufacturing of a concept I have created for the bar industry. The design will require material selection and engineering. An ideal candidate would have experience in outsourced furniture manufacturing with experience in unique materials including possibly aluminum and lightweight polymers. I will share specifics of product concept upon execution of NDA. Thank you for your interest.
Category: Contract Manufacturing       

z****ock
 [?]
Sign in to view client's details.
| z****ock
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 01, 2015  |  Ends: 12d, 18h  |   3 Proposals
Seeking design and manufacturing support for a new footwear concept. Basic concept will be a galoshes, rain boot style footwear with enhanced lining. Seeking a designer to provide initial concept renderings with access to contract manufacturers for initial prototype creation. More detail to be provided upon execution of NDA. Thank you for your interest.
Category: Contract Manufacturing       

z****ock
 [?]
Sign in to view client's details.
| z****ock
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job