Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 21 minutes ago  |  Ends: 2d, 23h  |   0 Proposals
RFQ for Quantity Takeoff of: 28 Unit Townhouse complex multiple buildings, approximately 5 unit types Foundation Walls Chimneys Exterior Walls, Vinyl Siding Exterior Walls, Brick Siding Exterior, Window Assemblies Exterior Doors Exterior - Patio Doors, Sliding Garage Doors (Twnhse) Pitched, Asphalt Shingle Eavestroughs and Downspouts Fascia Board Flashing (Siding, Windows, Eaves) Caulking and Weatherstripping Exterior Painting Lobby Redecoration Electrical Services and Distribution Exterior Lighting Fencing - Wood Patios and Walkways - Concrete Pavement Asphalt Hard Landscaping Soft Landscaping Perimeter Drains Services and UG Piping Quantity takeoffs from drawings: Scale drawings, please provide scaled baseline on output Provide quantities and some method of verifying accuracy of takeoffs Provide descriptions of each component in as much detail as allowed by available info A sample description would be as follows: Perimeter Fencing The fencing consists of solid cedar planks, 2....
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

d****853
 [?]
Sign in to view client's details.
| d****853
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 8m ago  |  Ends: 6d, 16h  |   16 Proposals
I am looking for a company to manufacture four plastic prototypes using a 3D printing or another Rapid Design plastic product creation method. I do not need the parts designed. I have my own engineers and designers who will produce 100% complete SolidWorks files for use by the plastic part manufacturer. I am not trying to hire any design services, only manufacturing services for generating these four prototype parts in plastic from my drawings. Biggest part will be 19" x 6" by max. 2" tall. Eventually these would be cast stainless steel, but for now we only want one each of three plastic prototypes first to evaluate fit and function. Would first like to identify possible suppliers of this service and then can communicate better with parts drawings, first in pdf form and then in actual 3D files
Category: Other - Engineering &...       
Skills: 3D Printing, Rapid Prototyping       

p****bob
 [?]
Sign in to view client's details.
| p****bob
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 18h, 35m ago  |  Ends: 2d, 5h  |   20 Proposals
My circuit design business is getting more work than I can handle, so I'm looking to find another circuit designer (or maybe more than one) that can help with some of the circuit design. I need someone with experience in the following areas: Microcontroller based design Analog Circuit Design Bluetooth, USB, serial comm, etc Power supplies
Category: Electrical       

J****lEE
 [?]
Sign in to view client's details.
| J****lEE
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 22, 2014  |  Ends: 1d, 20h  |   0 Proposals
read the article and answer the questions that follows. based on optical fibres and satellite link budgets.
Category: Other - Engineering &...       

l****er9
 [?]
Sign in to view client's details.
| l****er9
|    United Kingdom
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Apr 22, 2014  |  Ends: 5d, 16h  |   41 Proposals
I have about 40 pieces of bedroom furniture that have been measured in inches which need to be turned into simple 2-D "blocks". Each would need a product number and name as part of the saved block. I will provide you with the dimensions and text information for each item.
Category: CAD       
Skills: AutoCAD       
Preferred Location: United States

D****ign
 [?]
Sign in to view client's details.
| D****ign
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Apr 20, 2014  |  Ends: 4d, 3h  |   49 Proposals
We need a drafting professional to work for us on an ongoing basis. Using CAD, this person will create a bill of materials and drawings for each new order. We get 10-20 new orders a day. This will work well if you are in the Dallas/Ft. Worth area. Please write so I can explain more. <b>Approximate start date of the project after selecting a bid</b> Immediate (within 1-2 days)
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

a****ech
 [?]
Sign in to view client's details.
| a****ech
|    United States
Hourly Rate: $10 - $25 / hr   |  Duration: 3-4 weeks  |  Posted: Apr 20, 2014  |  Ends: 4d, 3h  |   26 Proposals
I need an enclosure for a digital watch:   [obscured]  /projects/920064946/oscilloscope-watch The original prototype was done in Solidworks, but this design is to be considered only as a reference, this design has many flaws and intended only to be 3D printed:   [obscured]  /thing:181812 The new design will be done from scratch, the design will be produced for injection molding. The design does not need to look exactly the same as the prototype. The new design will need to use standard 22mm straps. The design will consist of many parts: - Top and Bottom, these are the main parts. - Display cover (glass crystal or other hard material to protect the display) - Button covers (3 different pieces) - Slide switch covers (2 identical pieces) - Light diffuser (similar to a light pipe) - Rubber covers, for the USB port and possibly the for the input connectors. I will provide you with a 3D model of the PCB assembly, as well as a mechanical sample, and a sample of the...
Category: Product Design       

g****ani
 [?]
Sign in to view client's details.
| g****ani
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Apr 17, 2014  |  Ends: 21h, 41m  |   23 Proposals
Need someone who can create cool looking 3d drawings based on our 2D concepts. This is a container/cartridge with tamper proof cap. The drawings do not need to be functional, they will be used in a proposal only and not converted to solid products at this stage. We are based in NYC.
Category: 3D Modelling       
Skills: 3D       
Preferred Location: North America

m****ank
 [?]
Sign in to view client's details.
| m****ank
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: Apr 15, 2014  |  Ends: 6d, 19h  |   3 Proposals
You Must Have Access to Vectorworks for this job. Kitchen design studio is looking for experienced Vectorworks draft person to detail drawings of completed kitchen designs to be used by residential contractors. The work is not complicated - determine correct placement of electrical outlets based on appliance specs, dimensioning and noting existing elevations. Kitchen design experience may be helpful, but is not required. I will provide instructions and samples of past completed work. Access to a Vectorworks program is a absolute requirement. Each project should take 4-5 hours. I have three to be completed in the next 2 weeks. Hourly rate is flexible.
Category: Architecture       
Skills: AutoCAD, Vectorworks       

a****ndc
 [?]
Sign in to view client's details.
| a****ndc
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 15, 2014  |  Ends: 6d, 18h  |   10 Proposals
Create 99 dxf files using the names in spreadsheet and the shape described in drawing. Create a system that would allow for automatic or semi-automatic creation of files. Provide files as individual DXFs in a zip file. Develop a long term model for creating DXFs from names. Any code developed for system will be property of infrared tools. It is our intention to use the developer for the long term file creation; however, to minimize risk we require the code.
Category: Mechanical       
Preferred Location: United States

t****rmd
 [?]
Sign in to view client's details.
| t****rmd
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 15, 2014  |  Ends: 6d, 18h  |   27 Proposals
If willing to sign a non-disclosure document, I would like to hire someone to produce an illustration, and final product illustrations. I currently have some basic rough sketches of the first device.
Category: 3D Modelling       
Skills: 3D Modeling, SolidWorks, 3D Design, 3D Rendering       

y****sta
 [?]
Sign in to view client's details.
| y****sta
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Apr 15, 2014  |  Ends: 6d, 10h  |   8 Proposals
I need a qualified and experience food scientist, nutritionist, or other related background to discuss and review several new nutritional snack foods and nutritional supplements. 1. Compatibility of ingredients in regards to degradation or secondary undesirable reactions over time. 2. Estimated shelf life for degradation of ingredient combinations (see #1) and labeling purposes. 3. FDA and/or other regulatory requirements. 4. Domestic and international regulatory and labeling issues. 5. Suggested manufacturing resources.
Category: Other - Engineering &...       

B****tti
 [?]
Sign in to view client's details.
| B****tti
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 7-9 months  |  Posted: Apr 15, 2014  |  Ends: 6d, 9h  |   16 Proposals
I am currently searching for experienced Construction Estimators or Quantity Surveyors for commercial and residential tender estimates and line item take-offs (BOQ's) for Commercial Plasterboard Partition & Ceiling Projects. Our projects range from small interior office/corporate build-outs to large scale high-rise new construction buildings. We also deal in the residential home building industry, including additions, renovations, alterations, new home construction, etc. All drawings and specifications will be posted to an online document site in PDF for ONLY and it is expected that you would download the documents, complete electronic take-offs, list all assumptions/clarifications that were made in development of the estimate and input all quantity take-offs into an excel spread sheet estimate form as well as marked up plans showing you have covered all the required areas. You would be responsible for all estimating/take-off software you would use. Estimates/Quantity Surveys mu...
Category: Architecture       

H****ell
 [?]
Sign in to view client's details.
| H****ell
|    Australia
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Apr 15, 2014  |  Ends: 6d, 9h  |   24 Proposals
I have a shipping container in my garden. To get planning permission from the local municipal council they want me to make it look more like a normal shed. I have some ideas to do this. I have photographs and plans. What I need is the sketch to show council what it will look like when it is finished. I want to line the container with the bamboo fence panels as shown and cover the roof with a curved roof as shown. the roof will hang about 150mm (6") over the sides... and the panels will be screwed on to the sides about 75mm (3") away from the walls of the container. I will weld steel palms onto the container to afix the fencing panels.
Category: Architecture       

n****n_i
 [?]
Sign in to view client's details.
| n****n_i
|    Australia
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: Apr 15, 2014  |  Ends: 6d, 8h  |   6 Proposals
I want to design a iPhone 5 Case that has slots to accept power from the following potential power cords: +iPhone 4 +Apple notebook +Regular USB +Samsung Galaxy S4 +LG G2 +Nokia Lumia 520 +HTC One I want the case to have slots for each of these cords to plug into. Each slot would be covered by a plastic fin. My hunch is for this to work, each of these slots could lead to a central charging pad (see enclosed photo of charging pad) that is sandwiched between the phone and the case (ie the charging pad is on the inside of the case). I enclosed hand drawn sketches of what I had in mind. Please pardon the chicken scratch. If you have any questions let me know. Need electrical engineer to design manufacture ready CAD for this. To apply, please send application listing experience, word 'elephant' towards the beginning of your application, and whether you think the charging pad is the best solution for this challenge. Don't do hours of research upfront to find the best solution for this a...
Category: Electrical       

m****le7
 [?]
Sign in to view client's details.
| m****le7
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 6d, 6h  |   68 Proposals
We are looking for Microstation and Autocad Drafters to work for us on a casual and ongoing basis. We have offices in Makati, and Malolos (Philippines). However, you are welcome to work from your preferred location. We will primarily require electrical drafters, but also have requirements for mechanical/civil/architectural etc. using various software.
Category: CAD       

K****lia
 [?]
Sign in to view client's details.
| K****lia
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 5d, 22h  |   3 Proposals
I am looking for someone with experience undertaking lifecycle environmental analysis to help put together a summary of LCA performance information across a wide range of products using industry standard software and platforms. I am looking at products spanning a number of different sectors and would like to approximate LCA analysis for each of them in a consistent fashion - the focus is on orders of magnitude and differences between categories rather than the details of product design or material choices. Experience of undertaking LCA is vital, as is familiarity with one or more of the databases available for this analysis. Please reply with information on your experience. Further details of the project will follow.
Category: Product Design       

a****how
 [?]
Sign in to view client's details.
| a****how
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 5d, 19h  |   18 Proposals
Text changes ONLY to some plans that need revising for submission to the local planning authority in the UK. The electronic originals are available in AutoCAD format. The Revised plans need to be sized for A1 and A3 and provided in pdf and editable AutoCAD format. Text Changes required are; CDR box requires all information removing including Logo. Inserting a Drawing Name - That I will Supply i.e. 1 - Site Plan Insert a Drawing Revision - That I will Supply i.e. Revision A All other text Removing similar to the Ground Floor example provided but the block text in the middle also need removing. Insert Text and a Key /Ledge that I will supply. EXAMPLE On Gnd Floor Plan. Text Block Starting - Revision E: 18.05.10 Needs to be replaced with Retrospective application to demolition 1930's farm house addition following Health and Safety meeting on site with AVDC and Structural Engineer on 1 September 2010. Parts to be removed identified in RED Hatch as (Example here) CDR Box text ...
Category: Architecture       
Skills: AutoCAD, Building Architecture       

2****ems
 [?]
Sign in to view client's details.
| 2****ems
|    United Kingdom
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 5d, 19h  |   28 Proposals
We are an elevator entrance frame & door company. Have been in the installation aspect of the business, now looking to get into the manufacturing of elevator doors and frames. We are looking for a Mechanical Engineer that can create an autocad drawing of the elevator entrance and door.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: United States

k****915
 [?]
Sign in to view client's details.
| k****915
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 5d, 15h  |   19 Proposals
I would like a circuit designed to produce a current with a specific voltage, waveform, and frequency. The design will be used to build a prototype. I will request a confidentiality agreement, provided by my organization, for the project. I may request several circuit designs afterwards with slight modifications, or seek advice when assembling the circuit.
Category: Electrical       

b****kdw
 [?]
Sign in to view client's details.
| b****kdw
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 5d, 8h  |   3 Proposals
Do you have a strong Biomedical Engineering background? Are you extraordinarily reliable with a 'can do' attitude? Are you passionate and enthusiastic? Perhaps you are retired? The Engineering Institute of Technology is looking for a Biomedical Engineering Instructor to present our online engineering programs and would love to hear from you. Each unit is delivered online through a program called Blackboard Collaborate which means that you are able to lecture from the comfort of your own home; all that you need is an internet connection and a headset. It is essential that you have the relevant qualifications; have industry experience; are willing to learn and have exceptional communication skills, with a clear and easy to understand neutral accent. Please contact me with your CV and a brief summary of your skills and experience
Category: Other - Engineering &...       
Skills: English, eLearning       

S****kay
 [?]
Sign in to view client's details.
| S****kay
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 5d, 8h  |   8 Proposals
We are after people with Engineering Education background with 5 to 10 years experience in developing engineering courses in diploma / advanced diploma / degree / masters level and experience in developing courses for the Australian tertiary education under the Australian Qualifications Framework.
Category: Other - Engineering &...       

S****kay
 [?]
Sign in to view client's details.
| S****kay
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 13, 2014  |  Ends: 2d, 0h  |   2 Proposals
read the article and answer the questions that follows. based on optical fibres and satellite link budgets.
Category: Other - Engineering &...       

l****er9
 [?]
Sign in to view client's details.
| l****er9
|    United Kingdom
Hourly Rate: $15 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: Apr 13, 2014  |  Ends: 4d, 22h  |   40 Proposals
Looking for someone who is proficient in auto CAD for lighting and furniture design. I have several designs to work from already and looking to add to my line. Several of the lighting designs are going to be modular and interchangeable. Will discuss more if an interested party wants to proceed. *note - all items need to be in production by May 31st *** production is in Mexico. If the perspective speaks Spanish, please note clearly to me in your response - as this is helpful for communication with my artisan. This is not a pre-reaquistie but an added quality.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

D****rks
 [?]
Sign in to view client's details.
| D****rks
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 13, 2014  |  Ends: 4d, 15h  |   3 Proposals
Hi, I need a hydraulic simulation model to be built using AFT Impulse. Model includes a surge tower in between to determine required pipe pressure in case of power loss which might induce water hammer due to vertical differences in pipes. The model is to be built using a shared screen viewer (team viewer or something else). The other aim of the project is to tutor me in building/expanding the model.
Category: Civil & Structural       
Skills: Civil Engineering, hydraulics, pipe networks       

p****203
 [?]
Sign in to view client's details.
| p****203
|    Indonesia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job