Save this Search
     
Sort by:
  • Posted Date
Posted: Within 3 days
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 35 minutes ago  |  Ends: 29d, 23h  |   0 Proposals
Minimum skill level required 40 HOURS PATERN WORK 10 HOURS OF GRADING 6 HOURS OF DRAPING 3 HOURS OF TEXTILE SCIENCE 6 HOURS OF DESIGN DEVELOPMENT 6 HOURS OF PRODUCTION SEWING METHODS 3 HOURS OF PRODUCTION PLANNING AND SCHEDULING 3 HOURS OF ADVANCED MATHEMATICS FORMAL EDUCATION A PLUS BUT NOT DECIDING FACTOR- IF FORMAL EDUCATION ONLY WITH NO EXPERIENCE TRANSCRIPTS WILL BE REQUIRED.
Category: CAD       
Preferred Location: North America

A****sst
 [?]
Sign in to view client's details.
| A****sst
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: 8h, 39m ago  |  Ends: 14d, 15h  |   5 Proposals
AutoCAD Draftsman tasks with Developing detailed MEP drawing in AUTOCAD.3D modeling drawing. Completing As-bulit drawing.
Category: Mechanical       

O****One
 [?]
Sign in to view client's details.
| O****One *
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: 10h, 7m ago  |  Ends: 14d, 13h  |   15 Proposals
Design a water resistant plastic housing to hold and protect a PCB and lithum battery. The housing will also incorporate a solar panel on one side of its exterior, have 2 external (water-resistant) antenna ports, and one USB port. The device must also be able to open so that the battery can be accessed/changed. The housing will be designed to be mounted to a tree, and will include an opening through the middle to allow for a python locking cable to be used.
Category: 3D Modelling       

r****318
 [?]
Sign in to view client's details.
| r****318
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 16h, 46m ago  |  Ends: 14d, 7h  |   2 Proposals
Programming firmware for Atmel SAM D21 microcontroller. Following functions have to be covered: - basic firmware for SAM D21 clock, ports, etc. - DMX receiver compliant to DMX512 protocol. - 2x16 character LC display vie SPI - 4 buttons for control the menu at LCD - The DMX start address can be configured via buttons / LCD - 8 PWM outputs, with 8 respective 16 bit. The TCC unit of D21 have to be used. The circuit is developing right now by ourselves. The challenge will be to start the programming without final board because this project is under time pleasure. It may be ture that the firmware have to be programmed without the final PCB!
Category: Electrical       
Skills: C, ARM, Atmel AVR, Firmware Engineering       

e****mbH
 [?]
Sign in to view client's details.
| e****mbH
|    Germany
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 34m ago  |  Ends: 14d, 6h  |   6 Proposals
I am looking for someone to help me calculate shading and yearly output from solar panels, I need to know if smart panels is neccesarry on a few peojekt where a chimney is an issue. Prefebly if you have experince in the PV industri, but if yuo know how to create a shading analysis it would be interesting to
Category: 3D Modelling       
Skills: SketchUp       

m****man
 [?]
Sign in to view client's details.
| m****man
|    Sweden
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 54m ago  |  Ends: 14d, 0h  |   3 Proposals
Similar product: Verizon fleetmatics I would like to create an OBD device to interface with a front end to report fleet position and driving performance. The front end design of the application will be delivered from a separate provider.
Category: Product Design       
Skills: Manufacturing Design, Electronics       

L****cob
 [?]
Sign in to view client's details.
| L****cob
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 59m ago  |  Ends: 14d, 0h  |   4 Proposals
I need a drawings and permit package for and second floor deck project in Lower Fredrick township in Montgomery County Pennsylvania. I have preliminary drawing and specs. Needed ASAP
Category: CAD       
Skills: 3D Modeling, AutoCAD       

s****mmy
 [?]
Sign in to view client's details.
| s****mmy
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-3 months  |  Posted: May 28, 2015  |  Ends: 13d, 22h  |   21 Proposals
I want a full set of construction drawings for a remodel & addition to a 1930's bungalow in Houston Texas. As builts, site plan, demolition plan, floor plan, elevations, mechanical plans, roof plan, foundation plan, and structural drawings. I will have local engineer stamp. We will work with client and you thru design, assuming revisions to base plan, until we finalize then create permit set
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

H****n99
 [?]
Sign in to view client's details.
| H****n99
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: May 28, 2015  |  Ends: 13d, 16h  |   11 Proposals
I'm looking for a programmer to help me write code for an arduino run circuit. When a button is pushed, two things happen; 1. one led lights, then dimm's down within a 1/4 of a second. 2. the next led lights, then dimm's down within a 1/4 of a second. I will be using super bright led's, like the ones shown here;   [obscured]  /products/531 ill be looking to make this gimmick pretty small, but enough current to supply the led's. To further understand my requirements I would be happy to discuss through Skype or google hangout. This job is also a trial employment; as further electronic products will be needed in the future. If there's any more information you require please don't hesitate to ask.
Category: Electrical       
Skills: arduino programming       

s****oup
 [?]
Sign in to view client's details.
| s****oup
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 13d, 2h  |   3 Proposals
Charity open water swim 8/15/15. Need waterproof individual ankle or wrist timing device for participants swimming 2.4 mile race in 70 degree lake. Start and finish line same location.
Category: Electrical       

t****tis
 [?]
Sign in to view client's details.
| t****tis
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 12d, 22h  |   12 Proposals
The current version of the device is fairly basic, stands about 12 inches tall and contains 18 total parts. The basic features/movements of the device are simple, but the current components are unnecessarily complex. I want to re-design the prototype to be more streamlined and simple. I had a prototype done in SLA and have previously had individual device parts 3D printed in ABS. I would like to work with someone who: 1) is capable of helping envision a new design that simplifies aesthetics while improving function; 2) is capable of using software to actualize these design(s) so they can be prototyped and tested; 3) can provide ideas on manufacturing optimization (tooling, CNC, 3D print, etc.) at different stages of development; 4) can show they will hold my work in strict confidence. I look forward to working with you! -Camden
Category: Product Design       

c****ong
 [?]
Sign in to view client's details.
| c****ong
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: May 27, 2015  |  Ends: 12d, 21h  |   2 Proposals
Our web site is in bad shape. I have written up some items for each tab. I need someone to go over the draft and edit. The writer do need to understand the meaning of technical words and edit accordingly. We do not need technical editing or new technical writing. Just make the words flow smooth. It is hard for you to quote but if the text is simple English, how much time approximately it takes to edit one page? I have about 20-30 pages to edit right now. May be more later on.
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

p****uka
 [?]
Sign in to view client's details.
| p****uka
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 12d, 17h  |   26 Proposals
Hello, I need help to draw a battery box with components on SolidWorks 2013. Please find attached a pictures of the box. For this job, I will be able to provide more pictures and dimensions. Thank you. Luiz
Category: CAD       
Skills: SolidWorks       

l****ffo
 [?]
Sign in to view client's details.
| l****ffo
|    United States
Hourly Rate: $15 - $25 / hr   |  Duration: 1-3 months  |  Posted: May 27, 2015  |  Ends: 12d, 16h  |   7 Proposals
Hey Everyone, Our team is developing a new online Geometric Dimension and Tolerancing fundamentals course that we are very exited about. Our goal is to expand GD&T training beyond the classroom into an on-demand video/lecture series that is based on the students needs. We have begun to develop our core curriculum that we want to release for order within the coming months. I am the lead course developer for this project, and while I love making the course, it is becoming overwhelming for me to also drive the business and establish our marketing. I want to get the initial core curriculum out the door quickly to start receiving user feedback. I am looking to hire a GD&T Professional who has worked in engineering and can help with the development of our course. Although I need a GD&T expert, I am looking for someone with a bit of an entrepreneurial spirit who is looking for an exciting opportunity to teach others about engineering topics. The work will be part time, so...
Category: Mechanical       
Preferred Location: United States

g****stc
 [?]
Sign in to view client's details.
| g****stc
|    United States
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: May 27, 2015  |  Ends: 12d, 16h  |   7 Proposals
We are working on a project to develop a surface-following, solar-powered ocean instrument that measures motions and transmits the data real-time. The project will encompass the electronics and software design for the power management module, motherboard, sensor package, and communication module. We are looking for an embedded systems engineer or electrical engineer who can work with our team to design and build custom PCBs to integrate the system modules, develop software to support the hardware, and test the system for functionality. We are a small startup located in the San Francisco Bay Area (Half Moon Bay), and we would prefer to work with a local contractor to allow for regular meetings.
Category: Electrical       
Preferred Location: United States

s****ift
 [?]
Sign in to view client's details.
| s****ift
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: May 27, 2015  |  Ends: 12d, 14h  |   4 Proposals
This job is for architect or engineer who has done container homes and have a design knowledge of the concept, other than putting two or three containers together. Must be creative, attention to detail. Must be a licensed and able to provide stamped plans.
Category: Civil & Structural       

m****ice
 [?]
Sign in to view client's details.
| m****ice
|    Kuwait
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 87d, 13h  |   2 Proposals
I like to find somebody to make the design of automatic hair cutter may be same as the bellow:   [obscured]  /watch?v=7HejC2lTet4 But should be higher technical than it. I prefer 3D scanning firstly and choose the hair styles from computer. Or sample one firstly and develop it. I'm 4 companies owner and the above is one of my dream because no barber make me satisfied till now,I'm sure you too.Ok LET'S DESIGN FOR OURSELVES AND CHANGE THE WORLD.
Category: Product Design       

t****xus
 [?]
Sign in to view client's details.
| t****xus
|    United States
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: May 27, 2015  |  Ends: 12d, 11h  |   4 Proposals
Introduction of the project + New references from 2010 newest + litliture revew Engineering project I want to project on Safety Meting Civil Engineering
Category: Civil & Structural       

b****rre
 [?]
Sign in to view client's details.
| b****rre
|    Hong Kong SAR, PRC
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: May 27, 2015  |  Ends: 12d, 5h  |   14 Proposals
DO NOT APPLY IF YOU HAVE NOT DONE WINDOW SHOP DRAWINGS BEFORE From Supplied Architectural PDF and CAD Drawings create shop drawings for approval by projects Achitects / Builders in a 2 week turn around time. You will be provided with Standard Extrusion profiles, Examples of those profiles already showing several types of fitting situations and substrates. a Template in AutoCAD format to work to (or create / work with your own if you prefer) Require someone who has worked with Commercial Project Drawings and has a comprehensive understanding of Aluminum window and door profiles, fitting methodology etc. Note that quiet often its simply a case of taking the architect supplied drawings and substituting their "wireframe" window placeholder with the actual frame and glass drawings.
Category: CAD       
Preferred Location: Australia/Oceania

t****rer
 [?]
Sign in to view client's details.
| t****rer
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: May 26, 2015  |  Ends: 12d, 2h  |   12 Proposals
Looking for Freelance 3D designer for jewelry. Expert in high end jewelry I'm here to increase my team of subcontractors. Thanks
Category: 3D Modelling       
Skills: 3D, Rhinoceros 3D, SolidWorks       

M****not
 [?]
Sign in to view client's details.
| M****not
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: May 26, 2015  |  Ends: 12d, 2h  |   15 Proposals
I need someone doing freelance 3D jewelry pieces. I am expert in high end jewelry manufacturing and would like to increase my team. Normally working with Solidworks or Rhino.
Category: 3D Modelling       
Skills: 3D, Rhinoceros 3D, SolidWorks, Manufacturing       

M****not
 [?]
Sign in to view client's details.
| M****not
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job