Save this Search
     

All JobsEngineering & Manufacturing

 (534 results)  
Sort by:
  • Posted Date
Engineering & Manufacturing
Fixed Price: $1,000 - $5,000   |  Posted: 22 minutes ago  |  Ends: 25d, 18h  |   5 Proposals
I am looking for someone to create sports wear for me from designs and fabrics selected by me. You will be sent designs, colours and fabrics, from this you need to be able to put them into a product.
Category: Product Design       
Skills: Manufacturing, Textile Engineering       

L****FiT
 [?]
Sign in to view client's details.
| L****FiT
|    United Kingdom
Hourly Rate: More than $50 / hr   |  Duration: 1-3 months  |  Posted: 53 minutes ago  |  Ends: 14d, 23h  |   1 Proposal
We are developing a novel blood test that employs mass spectrometry detection coupled with high purity isolation of target analytes. Our 2nd generation isolation device is being developed on a microfluidic platform. It employs an isolation array based on order of magnitude difference in diffusion velocity. It is derived from work done by Dr. Austin at Princeton University during the 1990s... We collaborate with scientists at University of Florida for mass spectrometry, and University of Tubingen for protein isolation. We are fabricating our 2nd generation device in the Nanoscale Research Facility at University of Florida. We are seeking engineering expertise in micron-scale microfluidics. We would like to explore any interest you might have in collaboration on this? Thanks for consideration, Calvin Wiese, President Wellspring Clinical Lab, Inc. 185 Springwood Trail Altamonte Springs, FL 32714 (407)810-3944
Category: Chemical Engineering       
Skills: Research, Computer-Aided Design       

w****lab
 [?]
Sign in to view client's details.
| w****lab
|    United States
Fixed Price: Not Sure   |  Posted: 1h, 2m ago  |  Ends: 6d, 22h  |   2 Proposals
Create 3D model in CAD software and output into a plastic 3D model. Smarty 3D Printing project. Dimensions: Height (not counting antenna): 9.0" to 12" Outer Diameter of upper body section: minimum of 3.0" (if proportions are kept the same as the jpg drawing it will satisfy this requirement. We are located in the Bay Area in California.
Category: 3D Modelling       
Skills: 3D, AutoCAD, 3D Printing       
Preferred Location: United States

s****007
 [?]
Sign in to view client's details.
| s****007
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 1h, 18m ago  |  Ends: 14d, 22h  |   5 Proposals
End product should be a high-resolution and photo-realistic 3D rendering of back wall and floor with fireplace, mantel, wood/fire in fireplace. A very simple rendering but must look like it was photographed and similar to the attached sample but without the tree, no rug, no furniture, no stockings, no floral/garland, no vases, no chalkboard, no ceiling (have wall extent to the top, left and right)...simply floor, wall, mantel with fire screen, wood and fire. I'd like the ability to have a variety of revisions to get to the final product but to start, replicating the scene as I've described above and shown in the attached is step 1. If this process looks great, there are other opportunities to do more work and add in other elements. Please only submit bids if you are able to pull off renderings that look realistic, like we photographed the room and didn't render it. Also, the final rendering must be at least 4,500 pixels on the shortest edge. The smallest spec I need is 4,500x4,500 pix...
Category: 3D Modelling       

j****407
 [?]
Sign in to view client's details.
| j****407
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 1h, 22m ago  |  Ends: 14d, 22h  |   0 Proposals
We are looking for a electronics purchasing agent located in Taiwan. Our company   [obscured]   is in the process of sourcing and manufacturing our product. We would like an agent that has experience in negotiating and purchasing electronics. The agent must be fluent in English. They would be responsible for negotiating product pricing, working on product certification, product quality assurance, and any other tasks to help us achieve full scale production. Electronic experience is needed.
Category: Other - Engineering &...       
Preferred Location: Taiwan

s****rc1
 [?]
Sign in to view client's details.
| s****rc1
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 1h, 41m ago  |  Ends: 14d, 22h  |   6 Proposals
I'm looking for someone to build a high quality 3d model for me and possibly also make an animated Kickstarter / crowdfunding campaign video using the model.
Category: 3D Modelling       

M****y27
 [?]
Sign in to view client's details.
| M****y27
|    Canada
Fixed Price: Not Sure   |  Posted: 2h, 5m ago  |  Ends: 14d, 21h  |   1 Proposal
1) RFID based locking solution (Mandatory) ? Making an RFID based lock. ? Integrating the RFID based lock with the Raspberry Pi/Black Beagle. ? The Raspberry Pi should contain the database of RFID tags, which can be updated via an online server (Azure Web can be used to create the web interface), and we should be able to add the RFID tags directly using the web server. ? We must be able to get the logging data (check in time, checkout time, RFID tag no.) on either a note or excel sheet. ? Remember, only one user should be able to use the locker at any given point of time. Reference to how it may look like:   [obscured]  /watch?v=4lra1Y2RsWM 2) Temperature control ? Will be using a simple exhaust fan connected to a relay. ? Measure the temperature using a temperature sensor. ? The raspberry pi should signal the relay to turn on the fan when temperature inside the locker goes above 77 degrees Fahrenheit. 3) Capturing videos and streaming our Internet. ? We need to capture ima...
Category: Electrical       

j****ota
 [?]
Sign in to view client's details.
| j****ota
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 46m ago  |  Ends: 14d, 21h  |   3 Proposals
rework bracket for correct pem's fix deminsions and include side view look at the drawing that shows the side view for the pem sizes
Category: CAD       
Skills: AutoCAD       

S****079
 [?]
Sign in to view client's details.
| S****079
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: 3h, 5m ago  |  Ends: 14d, 20h  |   7 Proposals
I am looking at a 3 room free standing garage with electrical. Can you help me with the drafing part, I will get you the information, just need it in a legible- presentable to the city format.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

k****mer
 [?]
Sign in to view client's details.
| k****mer
|    United States
Fixed Price: Less than $500   |  Posted: 3h, 11m ago  |  Ends: 14d, 20h  |   3 Proposals
Need consultant for the selecting best home automation for home , provide with possible matrix to compare best home automation standards which can also be controlled by Ipad , building best home server with firewall , media center and etc
Category: Other - Engineering &...       

h****azi
 [?]
Sign in to view client's details.
| h****azi
|    United Arab Emirates
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 3h, 35m ago  |  Ends: 14d, 20h  |   0 Proposals
Hi, We have an autoit script that automatically posts Group Jobs to a webpage. Something on the page has changed and our script needs a fix up. I need the script revised accordingly .. 4 hours.
Category: Other - Engineering &...       
Skills: AutoIt       

T****tor
 [?]
Sign in to view client's details.
| T****tor
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 37m ago  |  Ends: 14d, 20h  |   0 Proposals
Job Description We are seeking a Salesforce.com Cloud Professional to work with the business process and development teams to design, implement and deploy Salesforce.com Cloud applications to a wide variety of clients at the enterprise level. Candidates for this role should possess knowledge of Salesforce.com application, data migration and integration capabilities. Additionally, the candidate should have the ability to uncover business requirements, develop a technical strategy and be able to create and effectively demonstrate solutions that address customer requirements. Candidates should have an understanding of Call Centers, Contact Centers or Delivery Centers. Candidates should have an understanding of key operational metrics and performance indicators used to manage a Customer Support environment. Candidates should possess knowledge of the relationship between a Customer Support environment and other Business units such as Sales, or Back-Office. Candidates should have know...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

s****FDC
 [?]
Sign in to view client's details.
| s****FDC
Hourly Rate: $30 - $40 / hr   |  Duration: 4-6 months  |  Posted: 3h, 51m ago  |  Ends: 29d, 20h  |   0 Proposals
Looking for and experienced pattern maker to work on pattern making, grading and marking. Must use of Gerber CAD or OptiTex PDS software system is required. Must be able to create Tech Pack. Must have excellent sewing skills in order to make samples of the garment. Must reverse-engineer patterns from existing garments using Digitizer table and Software. Must have experience making lingerie, undergarments, preferably compression garments. Must be capable of working with knits, elastic fabrics and jersey fabrics. Must have good understanding of how a fabric's construction will affect the fabric's reaction in sewing. Must have knowledge of knit fabrics for patterns with stretch and non-stretch properties. Must have knowledge of fabrications with reference to shrinkage, garment dye and washes, and have a strong background with Tech Packs. Must create pattern card with all necessary information including final spec measurements. Must create development and production patterns, and make chan...
Category: Other - Engineering &...       
Skills: Textile Engineering, cut and sew, tech pack       
Preferred Location: North America

t****rez
 [?]
Sign in to view client's details.
| t****rez
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: 3h, 53m ago  |  Ends: 14d, 20h  |   18 Proposals
I am an inventor with 7 potential new products that could be patented. I need someone to prepare simple drawings of simple products, in a drafting style. Can be done by hand, or with software. I will have many more in the future, so this could be ongoing work for you. Jim
Category: Product Design       
Preferred Location: United States

J****ski
 [?]
Sign in to view client's details.
| J****ski
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: 3h, 57m ago  |  Ends: 14d, 20h  |   1 Proposal
I am an inventor with 7 potential inventions. I need to have a patent search done on each of them by using the Internet. I will have many more in the future, so this could be ongoing work for you. Jim
Category: Product Design       
Preferred Location: United States

J****ski
 [?]
Sign in to view client's details.
| J****ski
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 4h, 8m ago  |  Ends: 14d, 19h  |   0 Proposals
We are looking for a capable and knowledgeable person to convert our current MSDS to the new format required by OSHA's GHS code.   [obscured]  /Publications/HazComm_QuickCard_SafetyData.html The product we manufacture is a water-based, environmentally friendly cleaner/degreaser. We need the appropriate pictograms added to the sheet as well. Thank you in advance for applying.
Category: Chemical Engineering       
Skills: HTML       

S****cts
 [?]
Sign in to view client's details.
| S****cts
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 56m ago  |  Ends: 14d, 19h  |   2 Proposals
i need job done on 14th July 2015 by 14:00 BRITISH TIME minimum report of 10 a4 sides maximum report of 12 a4 sides i need explanations for all questions and sub questions in word document report i need job to be clean and for M.Sc. level update required after every two days matlab/simulink files to be submitted yo ****SIMULINK EXPERT MODELLER***
Category: Other - Engineering &...       
Skills: MathCAD, Electronics, MATLAB, Simulink       

b****er9
 [?]
Sign in to view client's details.
| b****er9
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 4h, 59m ago  |  Ends: 14d, 19h  |   4 Proposals
Safety Belt - Strap & Buckle - with internal remote locking/un-locking with hand held remote control (like a key chain for car doors). Needs to be wireless with battery in main unit/buckle and key chain. Must hold up to 800lbs in holding/pulling pressure.
Category: Product Design       
Preferred Location: United States

b****are
 [?]
Sign in to view client's details.
| b****are *
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: 5h, 10m ago  |  Ends: 29d, 18h  |   6 Proposals
We at Design Factory working for New Product Design and Development, now a days due to increased work load we have two openings for design engineers, please have a look on skills which we are looking for : A). Industrial Designer : - Concept Sketches - 3D Modeling (Solid Works) - High Quality Render - Experience with Prototypes (3D Printing) - Knowledge of Manufacturing Process (Preferred) - Able to work on our projects minimum 20 Hours/ week B). Mechanical Design Engineer : - 3D Modeling - 2D Drawings - High Quality Render - Experience with Prototyping - Have to knowledge of Manufacturing Process (Injection Moulding and Casting) - Able to work on minimum 20 Hours/ week Looking forward for your portfolio.
Category: 3D Modelling       

p****186
 [?]
Sign in to view client's details.
| p****186
|    India
Fixed Price: Less than $500   |  Posted: 5h, 14m ago  |  Ends: 6d, 18h  |   15 Proposals
End product should be a high-resolution and photo-realistic 3D rendering of back wall and floor with fireplace, mantel, wood/fire in fireplace. A very simple rendering but must look like it was photographed and similar to the attached sample but without the tree, no rug, no furniture, no stockings, no floral/garland, no vases, no chalkboard, no ceiling (have wall extent to the top, left and right)...simply floor, wall, mantel with fire screen, wood and fire. I'd like the ability to have a variety of revisions to get to the final product but to start, replicating the scene as I've described above and shown in the attached is step 1. If this process looks great, there are other opportunities to do more work and add in other elements. Please only submit bids if you are able to pull off renderings that look realistic, like we photographed the room and didn't render it.
Category: 3D Modelling       
Skills: 3D Modeling, 3D Design, 3D Rendering       

j****407
 [?]
Sign in to view client's details.
| j****407
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: 7-9 months  |  Posted: 5h, 24m ago  |  Ends: 14d, 18h  |   3 Proposals
Hello everyone! We are looking for a freelance engineer who is able to design or to build this device   [obscured]  -o-moto.com/moto-sajt/raznoe/motodrajv/letayushchij-mototsikl
Category: Other - Engineering &...       

M****man
 [?]
Sign in to view client's details.
| M****man *
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 5h, 24m ago  |  Ends: 6d, 18h  |   2 Proposals
We are looking for a talented FPGA programmer to help us implement a low noise (<10nV/(rootHz)) lock-in amplifier for heterodyne detection of sideband signals. Carrier frequencies range from 0.3 to 1.5MHz. The lock-in amplifier must have the ability to generate signals at specified frequencies and demodulate signals at the sum or difference of two frequencies (FM/heterodyne detection). Your job will be to develop a working prototype that does the following: 1) Takes in signals via a high speed, 16bit ADC 2) Generates a sine wave with programmable amplitude (ranging from 0 to 5V) and frequency, f2 = (1 to 1000Hz) 3) Demodulates the signals at two frequencies f1+f2, f1+2f2. f1 is determined from the DAC input. f2 is the frequency generated in step #2. 4) Outputs the RMS amplitude of the two demodulated signals via a low noise, 16bit DAC. We have an ADC and FPGA eval board already chosen, part #'s AD9268 and HSC-ADC-EVALCZ from Analog. You will need to help us choose the DAC and fi...
Category: Electrical       

N****lIR
 [?]
Sign in to view client's details.
| N****lIR
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: 7-9 months  |  Posted: 6h, 25m ago  |  Ends: 14d, 17h  |   3 Proposals
Perform project estimates and cost control including planning and scheduling project monitoring and materials take off
Category: Civil & Structural       

m****che
 [?]
Sign in to view client's details.
| m****che
|    Philippines
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job