Save this Search
     

All JobsEngineering & Manufacturing

 (526 results)  
Sort by:
  • Posted Date
Engineering & Manufacturing
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I am a dermatologist looking to make my own brand of skin cream. I know specific active ingredients and concentrations I'd like for each different type of cream but I need a chemist to formulate the rest of the ingredients/steps required to manufacture these creams in a factory.
Category: Chemical Engineering       

S****tor
 [?]
Sign in to view client's details.
| S****tor
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 8m ago  |  Ends: 14d, 22h  |   2 Proposals
Hello -- I've designed a water pipe that I need in a 3D model that can be viewed 360. If you can do this, I'd really appreciate it!
Category: 3D Modelling       
Skills: 3D       

m****egs
 [?]
Sign in to view client's details.
| m****egs
|    United States
Fixed Price: Not Sure   |  Posted: 3h, 21m ago  |  Ends: 14d, 20h  |   1 Proposal
Looking for an Experienced freelancer for creating mechanical and production 3D & 2D drawings for large SheetMetal Enclosures. Would prefer to work with local or domestic freelancers who would be able to travel to our location in Southern CA to understand the requirements of the project in detail and work with prototypes and designs previously produced. Please apply only if you are able to travel to us and are available to start working immediately and finish the project on a priority basis.
Category: Mechanical       
Preferred Location: United States

i****r99
 [?]
Sign in to view client's details.
| i****r99
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 3h, 40m ago  |  Ends: 14d, 20h  |   1 Proposal
To draft house and proposed extension based on detailed sketch provided.This drawing will then be developed into a working drawing to get tenders.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

T****Eng
 [?]
Sign in to view client's details.
| T****Eng
|    Ireland
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 3h, 54m ago  |  Ends: 14d, 20h  |   4 Proposals
To draft plan and front elevation of house based on sketch provided. Client will then modify design and we will complete drawing. I need first draft by August 11th.
Category: Architecture       

T****Eng
 [?]
Sign in to view client's details.
| T****Eng
|    Ireland
Fixed Price: $20 - $50   |  Posted: 5h, 40m ago  |  Ends: 14d, 18h  |   2 Proposals
  [obscured]  /s/p1td6ki96nd840d/Designers%20version.rar?dl=0 this is the 3d model. try to do a drop test using solidworks. use any material and details for the test. if you can do that. i will award you the project.
Category: Product Design       

l****jay
 [?]
Sign in to view client's details.
| l****jay
|    Sri Lanka
Fixed Price: Less than $500   |  Posted: 7h, 27m ago  |  Ends: 14d, 16h  |   5 Proposals
I invented a product that has been successfully marketed and sold for nearly a decade. But the product design is simple and I only hold a design patent on it. I have also had knockoffs that competitors have had designed around my design patent. I hired a product designer to redo the product design in the hope I can obtain a utility patent on the new design, secure more protection for the product, and renew its marketing and look. I am looking for a product designer who can look at what my current product designer did and offer some suggestions to improve it or change it. I need someone who is familiar with the market for this kind of product and who is familiar with U.S. patents and the U.S. patent process to help me and my patent attorney secure a utility patent on it. I also need someone who designs with manufacturing cost in mind. The current product is very cheap to make relative to its retail price. The product is called The Mommy Hook. Look it up on the web. Thanks.(ID: 763...
Category: Product Design       

F****ONG
 [?]
Sign in to view client's details.
| F****ONG
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 46m ago  |  Ends: 14d, 14h  |   2 Proposals
Need to engineer a lay flat zero gravity chair. The current zero gravity chair does not allow a person to lay flat. Need product design ready for manufacture. Please respond with a quote.
Category: Product Design       

J****n01
 [?]
Sign in to view client's details.
| J****n01
|    United States
Fixed Price: Less than $500   |  Posted: 11h, 11m ago  |  Ends: 14d, 12h  |   3 Proposals
Hello, I have purchased an LED controler called a WIFI 300 controler. The device comes with a number of pre-programmed sequences to control 5 meters of LED strip that you connect to the controler. I would like to hire a person to reprogram the WIFI 300 controler so i can add some new sequences and remove some existing sequences. Please let me know. Thanks, Harry
Category: Electrical       
Skills: Electrical Engineering, Electronics       

h****tun
 [?]
Sign in to view client's details.
| h****tun
|    United Kingdom
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 12h, 14m ago  |  Ends: 14d, 11h  |   7 Proposals
i have various items that i need visualization for them in 3D. such as braclet, game gun, .....etc kindly show me you interest and sample of work
Category: 3D Modelling       
Skills: 3D, 3ds Max, 3D Modeling, Autodesk Maya, 3D Rendering       

e****yed
 [?]
Sign in to view client's details.
| e****yed
|    Egypt
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 14h, 10m ago  |  Ends: 14d, 9h  |   6 Proposals
We need to hire a structural engineer. First we would like to do a simple job. Please give the best rate to do the drawings for this retaining wall. This would be a masonry retaining wall length 40 feet height starting from 3 and end from 14 feet. so this is a slopy road side retaining wall soil is moderate there will be a 2 stroy house top of the retaining wall 8 feet distance you may ask any questions Our budget for this is very low. Roughly usd10
Category: Civil & Structural       

n****sta
 [?]
Sign in to view client's details.
| n****sta *
|    Sri Lanka
Fixed Price: Not Sure   |  Posted: 16h, 54m ago  |  Ends: 14d, 7h  |   27 Proposals
I have many ideas for Knives, Multi tools, bottle openers, and other such tools I would like someone to help me further the design and functionality of my ideas. Please be able to model them in 3D such as Solidworks for CnC machining/CAD. Most products will be made from METAL such as titanium or steel. It is also possible to create injection molded items. Please note that any intellectual property, products, and ideas shared or created in part or in full from any efforts within this job, are exclusively owned by me, and I convey no rights to the designer.
Category: Product Design       

b****ans
 [?]
Sign in to view client's details.
| b****ans
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 19h, 34m ago  |  Ends: 14d, 4h  |   0 Proposals
We are looking for formulations of Low cost corrosion inhibitor, for construction Industry. We will need a technically proficient candidate to suggest few options of formulation with references of his suggestions.
Category: Product Design       

n****arj
 [?]
Sign in to view client's details.
| n****arj
|    India
Fixed Price: $500 - $1,000   |  Posted: 20h, 50m ago  |  Ends: 14d, 3h  |   1 Proposal
This paper attached has an assay in it in section 2.2. It is said the assay involves northern blotting. How northern blotting involved in this paper. How it is done.
Category: Product Design       
Preferred Location: North America, Western Europe, Eastern Europe, Australia/Oceania

n****how
 [?]
Sign in to view client's details.
| n****how
|    Bangladesh
Fixed Price: Not Sure   |  Posted: 20h, 52m ago  |  Ends: 89d, 3h  |   2 Proposals
My group and I are working on a project to have tracking devices connect to a small cell(s). Do you think you can help me accomplish this? Thanks
Category: Other - Engineering &...       
Preferred Location: North America

s****929
 [?]
Sign in to view client's details.
| s****929
|    United States
Fixed Price: $500 - $1,000   |  Posted: 22h, 0m ago  |  Ends: 14d, 1h  |   2 Proposals
I'm looking to replicate a product. All (accept the INA 103) are essentially the same product found here:   [obscured]  /13-esd-calibration-test-targets Scroll to page 65 (page 34) of the IEC 61000-4-2 doc at the very end of the PDF for specifications and details for the product. We would like a sample before committing to a larger quantity, would be interested in pricing for 5, 10, 20 and anything close where a price break would occur. Let me know if you have any questions. I can provide a sample calibration certificate with data and curves as well. Would prefer if you can deliver the complete assembly including RF cable and attenuator but if you would like to focus on the current sensing transducer that is OK with me.
Category: Mechanical       

b****zzi
 [?]
Sign in to view client's details.
| b****zzi
|    United States
Fixed Price: Less than $500   |  Posted: 23h, 4m ago  |  Ends: 59d, 0h  |   3 Proposals
I need someone to esterify high amylose starch between (2.0 and 2.5 DS). I have purchased the high amylose starch from Ingredion. I have a background in molecular biology but my chemistry lab experience is very limited, not to mention I don't have a proper lab with a hood to do esterification. I don't need consultation, only actual esterification of starch in a lab. I'm need the starch to use in extrusion biopolymer blend.
Category: Chemical Engineering       
Preferred Location: North America

d****985
 [?]
Sign in to view client's details.
| d****985
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 41m ago  |  Ends: 14d, 0h  |   5 Proposals
I need some one to draw a map of a Traffic Control plan that includes detour, signage and ITC. Need it done by Sunday. Thank you
Category: Civil & Structural       
Skills: Architecture, Civil Engineering       

a****lat
 [?]
Sign in to view client's details.
| a****lat
|    United States
Fixed Price: Not Sure   |  Posted: Jul 31, 2015  |  Ends: 13d, 22h  |   7 Proposals
Looking to design a device which can be the size of a Samsung Note 2/3 (or smaller) and thickness doesn't really matter. The purpose of this device is to perform the following functions: - Send GPS signal of device's location - Capable of reading weight 5lbs min (Can be a mat (cloth) or something similar so when object is placed it'll read that weight when it goes past 5lbs. When weight goes above 5lbs it'll have indicator light on the actual device to show the weight of 5lbs or more is present. - Make an audible alarm (just like you'd hear on your smart phone) - Capable of communicating with the Mobile APP (Bluetooth) - Temperature reading capability - Device should have LED indicators - Device should be able to run on rechargeable lithium-ion battery and should be able to deliver performance signal for 10 hours - GPS is NOT activated after a certain action is not performed within the specified time (Save on battery life) The purpose of this device (size of smartphone) it'll ...
Category: Product Design       

W****2Go
 [?]
Sign in to view client's details.
| W****2Go
|    United States
Fixed Price: $100 - $200   |  Posted: Jul 31, 2015  |  Ends: 13d, 18h  |   2 Proposals
I am looking to produce a blanket product in South America. I am looking for someone to set me up with a factory and make production samples so I can place an order. The blanket is made from polar fleece.
Category: Contract Manufacturing       
Skills: Product Management, Product Development       
Preferred Location: Central & South America

S****015
 [?]
Sign in to view client's details.
| S****015
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 31, 2015  |  Ends: 13d, 18h  |   15 Proposals
Photorealistic render of an interior design project. Preferred knowledge in any 3D rendering software. Quick turnaround.
Category: Interior Design       
Skills: 3D Rendering       

a****bus
 [?]
Sign in to view client's details.
| a****bus
|    United States
Fixed Price: $20 - $200   |  Posted: Jul 31, 2015  |  Ends: 13d, 17h  |   28 Proposals
. We need two renderings showing the front and one of the side of the building ( see attached photos) we are adding an overhead door , windows, signage, etc. and want to show the client what it will look like - we do have floor plans and existing elevations in cad we can provide. . We can also provide photos or we can give you the address to google it. We will make the autocad plans and exterior elevations available to the person selected. We may also ask you to change the color of the building to two or three options to also show the client. If you place a bid this is the price we expect you to stick with. If you do not submit a fee we will not select you. We need these completed in one week so don't bid if you cant do the project. We do not have any 3d models available for your use. first attachment is general mark up of what we need. Second attachment are the exterior elevations Cad plans will be sent to the one we select
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, 3D Rendering       

s****ner
 [?]
Sign in to view client's details.
| s****ner
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 31, 2015  |  Ends: 13d, 15h  |   5 Proposals
Looking for one or two engineers to help design and develop a few devices integrating the CSR1010 Bluetooth Smart (BLE) module with a NFC or RFID Reader. Must have experience with and code samples of CSR microcontroller programming. Project will include some PCB design as well.
Category: Electrical       

u****ope
 [?]
Sign in to view client's details.
| u****ope
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job