Save this Search
     

All JobsEngineering & Manufacturing

 (529 results)  
Sort by:
  • Posted Date
Engineering & Manufacturing
Fixed Price: Less than $500   |  Posted: Jul 27, 2015  |  Ends: 12d, 13h  |   10 Proposals
Task 1 - Research Product ideas. Task 2 - Acquire contacts a manufacturers in china with those ideas. Task 3 - Send those product quotes to me. Will give additional info upon acceptance of the job. Warmly, Ryan
Category: Contract Manufacturing       

r****cre
 [?]
Sign in to view client's details.
| r****cre
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 27, 2015  |  Ends: 12d, 13h  |   18 Proposals
Hello, I would like to create a new design for these camera glasses.   [obscured]  /product-detail/140degree-wide-angle-Ambarella-A5-camera_60289050481.html?spm=a2700.7724838.35.1.fGPqG8 The electronics will be the same, but the new look should be as close to this as possible.   [obscured]  /news/google-glass-price-release-date-specs-and-info The electronics and battery can be housed behind the ear, as in the original design. Once hired, I will have samples of original design to you to take apart. -Once design is approved, I want to have samples 3d printed, to test fit. Finally, I want to take product into production to be delivered to factory for electroncs.
Category: Mechanical       

e****sio
 [?]
Sign in to view client's details.
| e****sio
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 26, 2015  |  Ends: 12d, 13h  |   15 Proposals
I have attached the concept drawing, Want to design an air freshener that can be attached between the vents for in home use. want the design to look like an actual product any changes or input to make the design look better would be appreciated.
Category: 3D Modelling       
Skills: Graphic Design, 3D Modeling, 3D Rendering       

m****c56
 [?]
Sign in to view client's details.
| m****c56
|    United States
Fixed Price: $80 - $150   |  Posted: Jul 26, 2015  |  Ends: 12h, 58m  |   14 Proposals
I'm looking for someone with electrical, mechanical and plumbing knowledge to provide electrical, mechanical and plumbing plans for my simple one-story tenant improvement project. I will send you proposed floor plan and equipment plan to be used as a base plan for Mechanical and Plumbing Plan. The project is in State of California, USA. The design are to be per CBC 2013 (2012 IBC with amendments), 2013 CMC (2012 UMC with amendments), 2013 CEC (2011 NEC with amendments), and 2013 CPC (2012 UPC with amendments). So I need someone with the code knowledge. Electrical: I have base plan and general notes with legend for electrical but it needs to be reviewed, enhanced as necessary, and finalized. Mechanical HVAC: There are two AC units available as shown on attached plan. Proposed ceiling diffusers are shown on plan but can be modified if needed. Notes, legends, and details are on there from previous project that you can refer to. Sample mechanical plan for previous project is attached....
Category: CAD       

W****ile
 [?]
Sign in to view client's details.
| W****ile
|    United States
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: Jul 26, 2015  |  Ends: 12d, 12h  |   1 Proposal
With almost twenty years combined experience in engineering and construction project controls including pre-commissioning and commissioning, Lewy has continuously and actively been providing his professional experience both local and overseas for the timely implementation of national roads and bridges in the Philippines, marine terminal in Kuwait, refineries and tank farms in U.A.E, central processing facilities for on-shore oil and gas in Algeria, brine concentrator plant in NT, Australia, hydro-metallurgical and pyrometallurgical nickel processing plant in New Caledonia, Anglo American Coal Projects, IndoMet Coal Projects in Indonesia with project values ranging from 300M USD to 5,500M USD. He has extensively gained knowledge and experience in project management, project coordination, and analytical skills in developing, updating, maintaining and integrating engineering and construction schedules from proposal, conceptual, pre-feasibility, feasibility and implementation stages within...
Category: Other - Engineering &...       

g****888
 [?]
Sign in to view client's details.
| g****888
|    Australia
Fixed Price: $1,000 - $5,000   |  Posted: Jul 26, 2015  |  Ends: 12d, 12h  |   8 Proposals
Provide engineering calculations for a range of light gauge steel structures. Calculations must comply with relevant Australian Standards. Calculations will be based on utilizing existing metal connections and components available in the Australian market. Schematic drawings of structures will be supplied by owner. Initial design range includes 14 different structure sizes. Owner will work with successful tenderer,providing support and design information based on 35 years of industry experience. only Engineers experienced with light gauge cold formed steel structures should apply.( AS/NZS 4600:200 Cold-formed steel structures)
Category: Civil & Structural       

R****ldu
 [?]
Sign in to view client's details.
| R****ldu
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jul 26, 2015  |  Ends: 12d, 8h  |   1 Proposal
I am looking for someone to formulate a organic beverage made with Organic Golden Monkey Tea, organic pure sugar cane and purified water. I have a sample of a competitor's tea that I can provide to you. My goal is to create a better tasting or similar tea.
Category: Product Design       

M****BOY
 [?]
Sign in to view client's details.
| M****BOY
|    United States
Fixed Price: Less than $500   |  Posted: Jul 26, 2015  |  Ends: 12d, 8h  |   3 Proposals
I am looking for a circuit designer (and possibly builder) who can use Broadlink Home Automation DNA to create an item that work through the Broadlink RM PRO to call lighting scenes. Broadlink is an existing semi-open source home automation system manufactured in China. The electronics seem quite high quality and they have created an aspect to their system called Broadlink DNA. This is a way that almost any other electrical appliance can communicate with the Broadlink hubs. Broadlink is a way of storing and centralizing remote commands for various light switches, TV and airconditioning systems. By using an APP on your mobile the system calls the stored commands and broadcasts them. What I am looking to do is create a unit that has a set of buttons that can be programmed through the APP to call scenes from the Broadlink. The scenes are a series of commands that activate a set of devices. This could be a "arrive home scene" where all the lights in a living area are switched ...
Category: Electrical       

b****own
 [?]
Sign in to view client's details.
| b****own
|    New Zealand
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 26, 2015  |  Ends: 12d, 8h  |   6 Proposals
I'm looking for a organic chemist or organic scientist to create an organic peanut lip balm. The product should protect dry lips, lip irritation and to help prevent sunburn while providing moisturizing lip care.
Category: Other - Engineering &...       

M****BOY
 [?]
Sign in to view client's details.
| M****BOY
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 26, 2015  |  Ends: 8h, 24m  |   1 Proposal
An array of buttons to read the Arabic alphabet when pressed. Voice quality needs to be clear. Suitable hardware/software technologies to be adopted for small sized application with low power usage (low voltage). Text to speech function needed when selecting more than one button to read the complete Arabic word.
Category: Product Design       

n****345
 [?]
Sign in to view client's details.
| n****345
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Jul 26, 2015  |  Ends: 4d, 7h  |   4 Proposals
Need a seasoned professor or experienced senior geotechnical engineer to write a 50 to 60 page Word(R) file on the following twelve topics: 1- Active earth pressure using Coulomb theory. Should included inclined backfill, wall friction and wall inclination considerations. 2- At Rest earth pressure using Jaky's equation with consideration for OC ratio and inclined backfill. 3- Passive resistance using Coulomb theory. Should included descending slopes, cohesion, slope creep, wall friction and wall inclination considerations. 4- Effect of tiered retaining walls. 5-Effect of adjacent surcharges. 6- Analysis method for ascending backfill slope angle exceeding soil friction angle. 7- Global stability analysis using Spencer method. 8- Analysis & effect of keyway. 9- Effect of stratified or layered soils. 10- Effect of relieving platform. 11- Effect of expansive soils backfill. 12- Effect of seismic earth pressure. I just don't have the time to do it. It will be used for seminars and in...
Category: Civil & Structural       

L****000
 [?]
Sign in to view client's details.
| L****000
|    United States
Fixed Price: Less than $500   |  Posted: Jul 26, 2015  |  Ends: 12d, 6h  |   1 Proposal
Hello. Please read the following carefully. I'm looking for someone to make 200 of these...... Step 1) Take a standard beer bottle. Cut the base off the bottle and discard the rest. You will now have a disc of thick glass about 6mm thick. Step 2) Put this on a vacuum forming machine and use it as the form. Use clear plastic about 200microns thick. Heat and pull the clear plastic down over the form. Step 3) Allow to cool. The finished product should be a shallow holder that a beer bottle would sit down into perfectly. I need 200 of these shallow holders. The attached image shows what I need you to MAKE. Let me be very clear. I DON'T WANT YOU TO design me a mold, or create a 3D model in CAD. I just want you to actually manufacture 200 of these little plastic discs. a) the plastic should be clear b) the plastic should be fairly rigid c) the shape should match a standard clear beer bottle PLEASE only contact me if you can actually make these discs. The fir...
Category: Other - Engineering &...       
Skills: plastic moulding - (vacuum)       

S****lin
 [?]
Sign in to view client's details.
| S****lin
|    Ireland
Fixed Price: Not Sure   |  Posted: Jul 26, 2015  |  Ends: 5h, 0m  |   17 Proposals
The job is to calculate the amount of air (m/h) and the pressure (Pa) required to cool down a box with a sensor inside and to advise in case optimization is required. Details: 1. The box housing with the sensor inside is modelled in 3D with Solidworks. The Solidworks model will is attached. 2. The box is having a ceramic plate at the bottom and the rest is made from aluminium. 3. All holes seen in the box will be closed with bolts, apart from the socket at the top for the cooling air inlet and the row of holes at the back for escaping of the cooling air. The row at the back can be adjusted for more or less holes, as per the best air flow. The size of the inlet nozzle can also be adjusted as per flow requirements. 4. The cooling air temperature is 48C. 5. The maximum temperature inside the box shall be 80C. 6. The surrounding temperature is 200C 7. Below the 7mm thick ceramic plate a piece of material is constantly touch with 450C temperature. So, we require someone who i...
Category: Other - Engineering &...       

A****any
 [?]
Sign in to view client's details.
| A****any
|    Germany
Fixed Price: Less than $500   |  Posted: Jul 26, 2015  |  Ends: 12d, 4h  |   29 Proposals
I have been doing some market research for baby bottles and have found an untapped market in the US. I need some help in creating a potential prototype of my idea.
Category: Product Design       

b****566
 [?]
Sign in to view client's details.
| b****566
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 26, 2015  |  Ends: 12d, 3h  |   4 Proposals
Hello We need a few data scientist to work on assignment basis for our start up. Please send across your profiles. We need data scientist to build predictive analytics model for our upcoming project. Thanks Hemal
Category: Other - Engineering &...       
Skills: Scientific Computation       

h****com
 [?]
Sign in to view client's details.
| h****com
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 26, 2015  |  Ends: 12d, 2h  |   13 Proposals
I am interested in designing and making an initial prototype of a specialized needle for head and neck injections. Ideally I'd like to have a prototype designed and made so it can be tested in animal and human cadaver studies in support of a patent application.
Category: Product Design       
Skills: Mechanical Engineering       

t****ski
 [?]
Sign in to view client's details.
| t****ski
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 26, 2015  |  Ends: 12d, 2h  |   1 Proposal
I am interested in designing and making an initial prototype of a specialized needle for head and neck injections. Ideally I'd like to have a prototype designed and made so it can be tested in animal and human cadaver studies in support of a patent application.
Category: Product Design       
Skills: Mechanical Engineering       

t****ski
 [?]
Sign in to view client's details.
| t****ski
|    United States
Fixed Price: $5,000 - $10,000   |  Posted: Jul 26, 2015  |  Ends: 27d, 2h  |   36 Proposals
Spliffmaster 3000 Project Goal must be to get a finish prototype. We have th idea for a mechanical cnc machine. we have a plan of the workflow and also done a lot of research for the different parts of the machine. we are able to produce and design the electrical part for the machine but we are looking for a product designer for all the mechanical parts. result should be a plan to build s prototype of the machine. Work with a small team, keeping things simple and come to the goal to finish a great idea. We are open to discuss payments with you and promise to pay a fair price.
Category: Mechanical       

s****2k2
 [?]
Sign in to view client's details.
| s****2k2
|    Austria
Fixed Price: Less than $500   |  Posted: Jul 26, 2015  |  Ends: 12d, 2h  |   5 Proposals
Hello, I am looking for ideas / approached / protocol suggestions on a wireless device implementation. Please do not bid on this if you do not have working experience with this type of network! I will not pay if you do not have real experience! My application has a master base / router to send out ON and OFF commands to the end devices.Each end device needs to be individually separately controllable. The end device is battery powered and controls a light. There is no real data to send upstream, so one way may be an option. The tricky part ... it needs to support 500,000 devices under the same roof. The protocols I have reviewed thus far will not support this many devices. So I am looking for protocol suggestions and frequency bands. Again DO NOT respond if you do not have real, successful, hands on experience! Thank you PS this device does not have to communicate on or over the internet. Additional information: The network topologies is open. I am able to use wired or wireless re...
Category: Electrical       

r****ics
 [?]
Sign in to view client's details.
| r****ics
|    United States
Fixed Price: Less than $500   |  Posted: Jul 26, 2015  |  Ends: 12d, 1h  |   10 Proposals
Hello, I am looking for additional ideas / approached on a LiPo charger circuit. Requirements: Schematic - can be hand drawn if very legible Single cell LiPo battery (100mah, with no secondary protection) +5V input voltage And the final, most difficult requirement... Total BOM cost of <$ 0.20 USD in volume. This will eliminate the typical LiPo single chip charger solutions. Probably will require discrete components. Additional information: Charging source is a USB port so figure 5V 100ma Over voltage charging protection is required. Deep discharge protection is required. There is a micro already available, so a digital I/O and ADC is available for intelligent control. That can be used to enable a series pass transistor, and ADC to monitor voltage. You would need to provide all scaling / and interface circuitry. Low bat indicator is desirable, can use micro ADC if needed.
Category: Electrical       

r****ics
 [?]
Sign in to view client's details.
| r****ics
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 26, 2015  |  Ends: 12d, 0h  |   5 Proposals
We are a product development company and need to source a reliable supplier of a specific stretchable headband. The band we are interested in has a soft, highly stretchable rubber core and sheathed in print fabric. The band expands about 300%. We require a very specific width to the rubber core. It must be 14mm wide. Looking for a suitable supply agent who can source quotes for a variety of high visibility, colorful print styles. Attached Youtube video shows an existing, common 10mm wide hair band. We need 14mm wide.   [obscured]  /watch?v=uuDES-M8t9o&feature=youtube_gdata
Category: Product Design       

p****son
 [?]
Sign in to view client's details.
| p****son
|    Bermuda
Fixed Price: $20 - $100   |  Posted: Jul 26, 2015  |  Ends: 11d, 22h  |   9 Proposals
i need Simulation of Optimum conditions for the cold compaction process of Aluminium Powder , please for all details find attachment with many thanks
Category: Mechanical       
Skills: ANSYS, Mechanical Engineering       

m****012
 [?]
Sign in to view client's details.
| m****012
|    Malaysia
Fixed Price: Not Sure   |  Posted: Jul 26, 2015  |  Ends: 3d, 22h  |   3 Proposals
I need a tutor in topology to help me in to understand some mathematical problems in topology I need a tutor in topology to help me in to understand some mathematical problems in topology I need a tutor in topology to help me in to understand some mathematical problems in topology I need a tutor in topology to help me in to understand some mathematical problems in topology
Category: Other - Engineering &...       
Skills: Mathematics       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Fixed Price: Less than $500   |  Posted: Jul 26, 2015  |  Ends: 11d, 21h  |   12 Proposals
  [obscured]  /watch?v=q5A8rp0oCYA WhyPlug (WP ) began with the desire to contribute to the community, the same way the communities have helped the AP's founders for many years. WP is a tool which helps in opening the bottles automatically. It is easy to use and is functional without any external force. One just need to place the plug on top of the bottle and it will open the cap/seal of the bottle automatically. It is a revolutionizing concept which will help the people with disabilities in their upper limbs (partially or completely). The idea is conceived and designed for the people with temporary or permanent disabilities but can be utilized by everyone including the aged people.
Category: Product Design       

S****imi
 [?]
Sign in to view client's details.
| S****imi
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job