Save this Search
     

All JobsEngineering & Manufacturing

 (651 results)  
Sort by:
  • Posted Date
Engineering & Manufacturing
Fixed Price: Less than $500   |  Posted: 41 minutes ago  |  Ends: 23h, 18m  |   0 Proposals
I am in need of an exterior design for a single family residence. This is concept only at this time, although I may come back in the future for a floor plan. I will give more details (lot measurements, pictures of neighborhood, etc) once I hire for this project, although here are some rough guidelines: -Square footage needs to be around 4000 total -Two or two and a half stories tall -Needs to fit in well with the street (I will provide images of the street and houses) -Maximum foot print of the house is around 2200 sq ft -We need basic dimensions, but most importantly very high quality renderings/3d modeling of the structure -We have a pretty quick turnaround time. I would need completed drawings in around 3 days from time of hire. I will reiterate.....this requires no work on the inside, no floor plan, no interior design. This also does not require an planning for construction. I simply need nice exterior images of what this site could be so that we can determine how to proceed w...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

M****lMD
 [?]
Sign in to view client's details.
| M****lMD
|    United States
Fixed Price: Less than $500   |  Posted: 1h, 4m ago  |  Ends: 14d, 22h  |   2 Proposals
Need consultant to improve on current design. Suggest improvement for a cleaner output while using low power supply such as 5VDC.
Category: Electrical       
Preferred Location: United States

j****n66
 [?]
Sign in to view client's details.
| j****n66
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 9m ago  |  Ends: 14d, 22h  |   1 Proposal
Hello, I need to design interface between Texas Instrument DSP (TMS320C28x or TMS320C3x) and PC thunderbolt2 port. All what I have a laptop and DSP and I need to communicate between them bi-directionally. I need someone to design pcb, manufacture it and test it. Can you help ? Regards Sam
Category: Electrical       

G****te2
 [?]
Sign in to view client's details.
| G****te2
|    Australia
Hourly Rate: $30 - $40 / hr   |  Duration: 1-2 weeks  |  Posted: 1h, 44m ago  |  Ends: 14d, 22h  |   0 Proposals
I'm looking for a few hours of time from a logistics expert. I have a product that is 11" x 3" x 2.5" weighs 15oz. and comes in 3 colors. I'm looking for help on the vagaries of GS1 codes, sizing/sourcing boxes, labelling etc. No real design work just consulting and telling me what needs to be done.
Category: Product Design       
Skills: Logistics & Shipping       
Preferred Location: United States

t****bke
 [?]
Sign in to view client's details.
| t****bke
|    United States
Fixed Price: Not Sure   |  Posted: 2h, 24m ago  |  Ends: 14d, 21h  |   3 Proposals
Two small PCB housings are to be designed for injection moulding. Approx. dimensions are 30x10x10 mm. One housing will need to be full IP-68 rated. Please reply with your best quote and past work that displays your skill set. Looking for someone who has past experience with magnetic chargers and waterproof casing designs.
Category: Product Design       

U****ONS
 [?]
Sign in to view client's details.
| U****ONS
|    Australia
Fixed Price: $30 - $40   |  Posted: 2h, 49m ago  |  Ends: 21h, 10m  |   0 Proposals
As attached As attached As attached As attached As attached As attached As attached As attached As attached As attached As attached As attached v As attached v As attached As attached
Category: Mechanical       
Skills: Mechanical Engineering, Mathematics       

S****ays
 [?]
Sign in to view client's details.
| S****ays
|    Kenya
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 9m ago  |  Ends: 14d, 20h  |   9 Proposals
I need a few simple, quick changes to be made to my .step files for a product. I can give you the files once I select you. The product is very simple, with few moving parts.
Category: 3D Modelling       

m****cer
 [?]
Sign in to view client's details.
| m****cer
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 3m ago  |  Ends: 14d, 19h  |   0 Proposals
5cm width 36 cm length Nylon material Velcro strap 2 x Schrader valves connected to a single bladder Blood pressure cuff with above specifications needed.
Category: 3D Modelling       
Skills: 3D Design, 2D Design       

m****oey
 [?]
Sign in to view client's details.
| m****oey
|    Australia
Fixed Price: Not Sure   |  Posted: 4h, 31m ago  |  Ends: 14d, 19h  |   5 Proposals
Hello, Can you please tell me how much it will be to get you to do elevations for: Guest sink along wall, floor Toilet walls and floors Kids bathroom everywhere and walls and floors Our bathroom everywhere and walls and floors Laundry everywhere and walls and floors our walk-in my office everywhere and walls and floors I have attached an example of what I mean. Its to be in black and white and must show all windows, doors and flooring/tiles or floors boards or carpet and all must fit to the sizes on the house plan. I will send a section each time for you to do once each one gets sent back. I need the guest area, kids bathroom, kids toilet, our bathroom all done in the next two days as I have a tiler waiting for it. Thank you
Category: Architecture       

N****you
 [?]
Sign in to view client's details.
| N****you
|    Australia
Fixed Price: Not Sure   |  Posted: 6h, 10m ago  |  Ends: 14d, 17h  |   16 Proposals
Hi - We need proper engineer drawings and Solidworks files made of a sheet metal enclosure. The enclosure is essentially a 20" x 12" x 12" box with rounded corners along one direction and some holes. We have solidworks for the file as detailed for other plastics processes but not for sheet metal. You'll have to break it up into pieces (if needed) and/or provide welding plans. And you'll have to optimize it so that it's as easy to make as possible and doesn't require much labor. Requirements: 1- Solidworks user 2- Must have significant experience with sheet metal design and fabrication. You must actually have completed sheet metal projects you can show us. 3- Fast turn-around. Optional but good to have: 1- Connections to actual sheet metal fabricators. Thank you
Category: Mechanical       

r****lar
 [?]
Sign in to view client's details.
| r****lar
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 6h, 24m ago  |  Ends: 14d, 17h  |   9 Proposals
Hi, I'm interested in getting a simple circuit for prototyping and production. It has a 12 volt input. 12 v high will cause a transistor to switch and close a circuit. 12v low will open the circuit. There will be two connectors, Molex 2510 2 pin (mates to this:   [obscured]  /product/20137115330401.jpg) that connects the 12v wires, and a second of the same connector that will be the open/closed circuit. The only components needed are the transistor and a resistor. I need the files that are ready for a prototyper to produce.
Category: Electrical       

N****an5
 [?]
Sign in to view client's details.
| N****an5
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 6h, 25m ago  |  Ends: 14d, 17h  |   18 Proposals
I will give you a pdf or powerpoint and I will need you to complete the drawings in a professional CAD file format that you can convert to pdf and send to me. You must have civil engineering skills and knowledge to do the work.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

d****tmf
 [?]
Sign in to view client's details.
| d****tmf
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 56m ago  |  Ends: 14d, 17h  |   2 Proposals
I have 2 microstation files for a project that is over 200 miles long. I would like to have the file converted into a kmz or kml file so I can view the information on Google Earth.
Category: CAD       
Skills: AutoCAD, Microstation, CAD/AutoCAD       

t****otz
 [?]
Sign in to view client's details.
| t****otz
|    United States
Fixed Price: Not Sure   |  Posted: 7h, 40m ago  |  Ends: 14d, 16h  |   2 Proposals
I need a single panel gate similar to the one in the attached image. Size is about 6ft x 4ft. The frame is 2" square aluminum and the infill panel is cut from 1/4" thick aluminum. The finish is a baked on powder coat over an epoxy primer. The finished product will be delivered to Toronto. Please mention if you are able to also install it.
Category: Mechanical       

t****ith
 [?]
Sign in to view client's details.
| t****ith
|    Canada
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: 7h, 47m ago  |  Ends: 14d, 16h  |   2 Proposals
We are a new company established to bring to market an innovative concept of a connected device. We have built a first prototype including electronics and smartphone app and are now moving to the next step, object of this job. The goal is to create a connected fitness device that is made of 3 parts: - a part hosting the electronics (the electronics itself is not included in this job) - an inflatable part over a plastic frame - a flexible arm linking the 2 parts I have made a first 3D prototype of those 3 parts and will provide the .STL files. The job consists in designing the 3 parts, including the way the parts are attached together. The bidder must be in the San Francisco Bay Area as face-to-face meetings are expected to be necessary. The bidder is also expected to sign a confidentiality clause for this job, above and beyond the default Elance clauses.
Category: Product Design       
Preferred Location: United States

j****and
 [?]
Sign in to view client's details.
| j****and
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 56m ago  |  Ends: 14d, 16h  |   26 Proposals
Hi, Need an exterior design and render for a six story stucco building 21' x 55' will explain more details later something like the attached style
Category: Architecture       
Skills: 3D Design       

B****ign
 [?]
Sign in to view client's details.
| B****ign
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 2m ago  |  Ends: 14d, 15h  |   4 Proposals
I need someone to design and make an exterior wall vent mask for a kitchen hood. The opening is about 13" x 6". I'm looking for a Voronoi design. Machined aluminum or 3d printed. Silver or black.
Category: Mechanical       

t****ith
 [?]
Sign in to view client's details.
| t****ith
|    Canada
Fixed Price: Less than $500   |  Posted: 8h, 14m ago  |  Ends: 14d, 15h  |   6 Proposals
We're looking for an electrical engineer to design a component that will be integrated into clothing. This product has never been invented before and I would like to see your portfolio. Once I see the portfolio, then we can discuss the product. Please submit your portfolios.
Category: Electrical       

a****inc
 [?]
Sign in to view client's details.
| a****inc
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 31m ago  |  Ends: 14d, 14h  |   19 Proposals
This is NOT an architectural project. I need a MECHANICAL rendering of a new rotary (NOT WANKEL) engine. It has 3 separate but identical rotating assemblies mounted in a single rotor. It is patented , so non-disclosure is not required. It will either be a cut-away or have some form of transparency to show interior. Animation preferred, if affordable.
Category: 3D Modelling       
Skills: Animation       

C****LLC
 [?]
Sign in to view client's details.
| C****LLC
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 37m ago  |  Ends: 14d, 14h  |   3 Proposals
I need a mechanical rendering of a new rotary (NOT WANKEL) engine. It has 3 separate but identical rotating assemblies mounted in a single rotor. It is patented , so non-disclosure is not required. It will either be a cut-away or have some form of transparency to show interior. Animation preferred, if affordable.
Category: 3D Modelling       
Skills: SolidWorks       

C****LLC
 [?]
Sign in to view client's details.
| C****LLC
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 42m ago  |  Ends: 14d, 14h  |   2 Proposals
Automatic Needle Threader that also ties a knot. It will be large enough to hold a spool of thread. Needle is laid in slot on top of machine then the "thread" button is pushed and your needle is AUTOMATICALLY THREADED AND KNOTTED.
Category: Other - Engineering &...       
Preferred Location: United States

f****roe
 [?]
Sign in to view client's details.
| f****roe
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 45m ago  |  Ends: 6d, 14h  |   13 Proposals
I need you to make a 3d CAD file (igs) for a part that will be manufactured by injection plastic The part is not very complicated, it will be similar to the piece on the attached picture. It is about 35x20cm I need someone that has already made parts to be manufactured injected plastic so he knows the rules that need to be applied to the part in order to make it manufacturable and keep the mold cost reasonable.
Category: CAD       
Skills: Mechanical Design, Manufacturing, 3D Design, CAD       

E****aii
 [?]
Sign in to view client's details.
| E****aii
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 49m ago  |  Ends: 14d, 14h  |   10 Proposals
I need an interior designer a to do a working drawing of a bed room which i will provid the picture and the plan in autocade. i need to have sections of this bed room showing the bed frame and later on we can agree on the other sections.
Category: Interior Design       
Skills: 3D Modeling, AutoCAD, Interior Design       

a****deh
 [?]
Sign in to view client's details.
| a****deh
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: 9h, 57m ago  |  Ends: 14d, 14h  |   2 Proposals
Hello, I am looking for someone to design 2 minimalist wallets. I would like them to be simple but chic. Simple is better. I would like them to have 3 card holders and a sleeve for cash. I would like them done in a computer aided design program such as AutoCAD.
Category: Product Design       

n****y27
 [?]
Sign in to view client's details.
| n****y27
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job