Save this Search
     

All JobsEngineering & ManufacturingCAD

 (59 results)  
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 26m ago  |  Ends: 14d, 20h  |   0 Proposals
Our company in is need of the following: 4 or 5 Electrical CAD Designer/Draftsmen Application software Autocad BSEE a must Over 5 Years Experience a must. Experience with aerial and underground circuits Experience in the transportation industry, train a plus Must live in the New York City Area Please include your resume and salary requirements
Category: CAD       
Preferred Location: United States

I****-pr
 [?]
Sign in to view client's details.
| I****-pr *
|    United States
Fixed Price: Not Sure   |  Posted: 7h, 32m ago  |  Ends: 6d, 16h  |   17 Proposals
I need a capable poduct designer/engineer for a sheet metal part (see attached sketch) used to mount on a backpack strap. It should be made of aluminium. As the first Batches of the product will be small, it should be laser cut and bended (not injection-molded) and CNC machined. Additionaly (as a part of this job but not shown as a sketch) I need a small wheel (around 5 cm diameter) with a 1/4 inch thread in the middle. For the later manufacturing process I need the CAD drawings converted to step files. Before starting you need to sign the sample elance Non-Disclosure Arrangement. Some model photos upon request.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

t****rac
 [?]
Sign in to view client's details.
| t****rac
|    Germany
Fixed Price: Not Sure   |  Posted: 11h, 55m ago  |  Ends: 14d, 12h  |   1 Proposal
I would like to put tiny stones in the cross, the rest of the brooch will be metal, and round, I would want to see the cross really stand out, it will be red tiny stones.
Category: CAD       

M****ira
 [?]
Sign in to view client's details.
| M****ira
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 23m ago  |  Ends: 14d, 6h  |   14 Proposals
I need some one to design a custom race kart frame for me the one main thing I ask is that it can support a Suzuki gxsr 600cc engine with chain drive in the rear, it cant sit no more then 2" from the ground, I would like it to be 1.5" from the ground it will have 6" * 11" tires in the rear let me know if you can come put with a design for this I would need all of the deminsions as well also it has to support a 6' tall person
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

d****ts1
 [?]
Sign in to view client's details.
| d****ts1
|    United States
Fixed Price: Not Sure   |  Posted: 19h, 51m ago  |  Ends: 6d, 4h  |   37 Proposals
The job consists of 3D design of pill bottle, cap, and an internal part for printing. Example model can be provided and explained more in depth to the awarded freelancer. An example model will be provided for show of concept and the completed model provides no complexity, just step by step height and width of cap, bottle, and internal part. The overall thickness of the parts will be no less than 2mm for printing purposes. Thanks for your consideration,
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

s****don
 [?]
Sign in to view client's details.
| s****don
|    United States
Fixed Price: Less than $500   |  Posted: 20h, 40m ago  |  Ends: 14d, 3h  |   15 Proposals
AutoCAD amendments to an existing landscape architecture design drawing. The provided data is available for review via Dropbox:   [obscured]  /s/d5aoeou0gkto9co/SI-01.zip?dl=1 1. the existing landscape autocad drawing file 2. the civil engineering autocad base drawing files 3. scans (.jpg) of the hand drawn amendment requirements which have been located at the correct coordinate location in the autocad drawing file. The requirements are: 4. To be completed within seven (7) days after acceptance 5. AutoCAD 2013 (or earlier) file 6. Layers to be named as per LA_XXXX_XXXX where XXXX is a descriptor ie LA_PATH_CONC is for a concrete path. 7. Linework to be joined polylines. No lines or splines. 8. Units = metres
Category: CAD       
Skills: AutoCAD, Landscape Architecture       

E****tes
 [?]
Sign in to view client's details.
| E****tes
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: 7-9 months  |  Posted: Jul 27, 2015  |  Ends: 28d, 17h  |   0 Proposals
ALEX - Alternative Experts, LLC is an established 8(a) Woman-Owned professional services company which was founded in 1987 and currently headquartered in Chantilly, VA. ALEX offers a wide spectrum of technical, logistical and program management solutions to fulfill program requirements, achieve greater productivity and increase competitiveness for our Federal, State and Local government as well as our commercial clients. By successfully partnering with our clients to provide superior services, cost effective and value-added solutions with the utmost of talented individuals, we have created The ALEX Advantage! Job Title: CAD Specialist Location: Arlington, VA Responsible for using Microstation, AutoCad, or Axiom software products to perform drafting, helpdesk support, and quality assurance and quality control tasks. This will include creating, drafting, modifying drawings, managing customer drawing package requests, and assuring the quality of the drawing packages being released t...
Category: CAD       
Preferred Location: North America

a****tex
 [?]
Sign in to view client's details.
| a****tex
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jul 27, 2015  |  Ends: 13d, 17h  |   28 Proposals
We have Autocad Drawings in 2D, and are reading to convert our drawing sets into AutoDesk Inventor. I am looking for someone who can take these drawings and convert on an hourly quoted basis. Let me know your hourly rate and I will send drawings to be quoted.
Category: CAD       
Skills: Autodesk Inventor, AutoCAD       

B****tCo
 [?]
Sign in to view client's details.
| B****tCo
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 27, 2015  |  Ends: 13d, 15h  |   12 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Nous recherchons un dessinateur 3D Solidworks pour une mission courte. Mission à rendre le 30/07/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: Jul 27, 2015  |  Ends: 13d, 15h  |   4 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Cherchons un dessinateur pour la réalisation de plans techniques. A rendre le 30/07/15.
Category: CAD       
Skills: AutoCAD, OrCAD, SolidWorks, 3D Design       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: Jul 27, 2015  |  Ends: 13d, 14h  |   7 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Réalisation pour un client de plans de structures en aluminium. A rendre le 30/07/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: Not Sure   |  Posted: Jul 27, 2015  |  Ends: 13d, 9h  |   19 Proposals
Hi, we have a prototype UAV that we have built and we would now like to take it further and make it look tidier and nicer. We would like to make the aircraft out of composites, in molds. This requires that we have stl files for those molds. Also we would like to enhance the design, look into details, change things around etc. All this requires as first step that we have a full working computer model of the aircraft. There are a few moving parts (e.g. the tail surfaces, propellers, landing gear retract) but it is not a huge amount of moving things. We have relatively accurate measurements and even a physical 'model' although it is not that nice, at least it can be looked at to get a rough idea. Created files should be viewable and be able to be manipulated in Autodesk inventor, because we have this program and it would be easier if both you and we could fully view the file, turn it around, assemble and disassemble the model, make measurements, etc. We would prefer a fixed pric...
Category: CAD       

S****DDG
 [?]
Sign in to view client's details.
| S****DDG
|    Singapore
Fixed Price: $80 - $150   |  Posted: Jul 26, 2015  |  Ends: 1d, 2h  |   12 Proposals
I'm looking for someone with electrical, mechanical and plumbing knowledge to provide electrical, mechanical and plumbing plans for my simple one-story tenant improvement project. I will send you proposed floor plan and equipment plan to be used as a base plan for Mechanical and Plumbing Plan. The project is in State of California, USA. The design are to be per CBC 2013 (2012 IBC with amendments), 2013 CMC (2012 UMC with amendments), 2013 CEC (2011 NEC with amendments), and 2013 CPC (2012 UPC with amendments). So I need someone with the code knowledge. Electrical: I have base plan and general notes with legend for electrical but it needs to be reviewed, enhanced as necessary, and finalized. Mechanical HVAC: There are two AC units available as shown on attached plan. Proposed ceiling diffusers are shown on plan but can be modified if needed. Notes, legends, and details are on there from previous project that you can refer to. Sample mechanical plan for previous project is attached....
Category: CAD       

W****ile
 [?]
Sign in to view client's details.
| W****ile
|    United States
Fixed Price: Less than $500   |  Posted: Jul 26, 2015  |  Ends: 12d, 8h  |   14 Proposals
need some drawing in solid edge 3d ST8 will supply cad and rough sketches need detail drawings
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, 3D Systems       

m****-uk
 [?]
Sign in to view client's details.
| m****-uk
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 25, 2015  |  Ends: 11d, 21h  |   29 Proposals
AutoCAD Project Format: AutoCAD 2010 Project name: Balance Template Layout: 2D Project Scope: Develop a drawing template for an industrial balance flow diagram (PID or PFD) to be used by our field engineers. Our engineers are familiar with AutoCAD and have limited working knowledge. The field engineer would be able to use Task: To populate the AutoCAD Design Center with standard blocks and other blocks from other prints. Currently, we have blocks existing in different prints and these blocks need to be extracted from the prints and put into the NEW AutoCAD drawing template. There would no more than 20 prints that blocks would need to be extracted from and imported into the new AutoCAD drawing template.
Category: CAD       
Skills: AutoCAD       

k****fel
 [?]
Sign in to view client's details.
| k****fel
|    United States
Fixed Price: Not Sure   |  Posted: Jul 25, 2015  |  Ends: 11d, 10h  |   26 Proposals
I require an experienced architectural draftsman to complete building application drawings. Base templates & house sitings will be provided in AutoCad 2014 format. An eye for detail & prompt turn around would be required. An understanding of Bracing requirements for Queensland would be an advantage. Multiple jobs are available to the right person.
Category: CAD       
Skills: Architecture, AutoCAD       

L****OBC
 [?]
Sign in to view client's details.
| L****OBC
|    Australia
Fixed Price: $35 - $100   |  Posted: Jul 24, 2015  |  Ends: 11d, 1h  |   33 Proposals
My project is pretty simple. I need 38 numbers of 3 different sizes to put into CAD files so that they can be properly 3d printed. The numbers have no overly unique typographic design to them, they only have certain size , width and thickness specifications.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, 3D Printing       
Preferred Location: North America

d****tte
 [?]
Sign in to view client's details.
| d****tte
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 10d, 20h  |   27 Proposals
We're a small company in Maine getting ready to put a new product into production, we need to do GD&T on our existing drawings and find ourselves short on time and looking to outsource the work. We would prefer someone local, but are open.
Category: CAD       
Preferred Location: United States

Z****ity
 [?]
Sign in to view client's details.
| Z****ity
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 85d, 14h  |   4 Proposals
I can solve tasks from Mathematic step by step and send to you as pdf Integration by parts u-substitution Reverse chain rule Integration using trigonometric identities Trigonometric substitution Division and partial fraction expansion and Differetials
Category: CAD       

q****ros
 [?]
Sign in to view client's details.
| q****ros
|    Serbia
Fixed Price: Not Sure   |  Posted: Jul 24, 2015  |  Ends: 2d, 10h  |   12 Proposals
Microcontroller PCB Connectors: 2 x RJ45 1 x JTAG 1 x uSD 1 x uUSB 2 x 50 Way Connectors (1mm pitch) (PLACEMENT CRITICAL) Critical Components 1 x XMC4400-F100K512 AB 1 x LAN9303 1 x TIWI-UB1 (450-0103C) 1 x LM22673-ADJ 1 x AP131-18WG-7 Schematic Tasks Additional passive components to be identified and used. 1 - Addition of header to breakout ALL io except those used for ethernet 2 - Addition of analog protection on ADC Channels 3 - Addition of DC Power In 4 - Ensure all Power and Ground net names are labelled correctly ( avoid copy paste errors that may have existed as schematic is currently WIP) 5 - Label All interconnects as per notes 6 - Determine if there is a level shifting requirement for the TIWI module and add components as required 7 - Submit schematic for review and acceptance Layout Tasks Target PCB area 50mm x 80mm PCB should be 4 Layers Components on Both sizes but ensuring that large components (height) are the opposite site to connectors to daughter board as thes...
Category: CAD       
Skills: OrCAD       

M****ics
 [?]
Sign in to view client's details.
| M****ics
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: Jul 23, 2015  |  Ends: 9d, 16h  |   17 Proposals
developing detailed designs; assessing the potential risks of specific projects, as well as undertaking risk management in specialist roles; supervising tendering procedures and putting together proposals; communicating and liaising effectively with colleagues and architects, subcontractors, contracting civil engineers, consultants, co-workers and clients; thinking both creatively and logically to resolve design and development problems; managing budgets and other project resources; managing change, as the client may change their mind about the design, and ensuring relevant parties are notified of changes in the project; leading teams of other engineers, perhaps from other organisations or firms; compiling, checking and approving reports; reviewing and approving project drawings; using computer-aided design (CAD) packages for designing projects; undertaking complex and repetitive calculations;
Category: CAD       

S****990
 [?]
Sign in to view client's details.
| S****990
|    United States
Fixed Price: Less than $500   |  Posted: Jul 23, 2015  |  Ends: 9d, 5h  |   30 Proposals
We require ongoing work for a Cabinetry detailer. As a kitchen renovator based in Australia, we do 5 projects per week and require the kitchen drawings drawn, detailed and annotated to a high standard. We are willing to work with you to bring the drawings to the specifications we require. Turnaround would need to be 24 hours for markups. Fee will be on a per project basis. Each project would be on a fee per room.
Category: CAD       

s****oms
 [?]
Sign in to view client's details.
| s****oms
|    Australia
Fixed Price: Less than $500   |  Posted: Jul 23, 2015  |  Ends: 9d, 5h  |   17 Proposals
We require ongoing work for a Revit Draftsperson. As a bathroom renovator based in Australia, we do 5 projects per week and require the building drawings drawn and annotated to a high standard of detail. we are willing to work with you to bring the drawings to the specifications we require. Turnaround would need to be 24 hours for markups. Fee will be on a per project basis. Each project would be on a fee per room.
Category: CAD       
Skills: AutoCAD, Autodesk, Autodesk Architecture       

s****oms
 [?]
Sign in to view client's details.
| s****oms
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 8d, 16h  |   27 Proposals
We need to have a technical CAD drawing of a small plastic part we need manufactured. This part will probably be made by plastic injection molding. The part exists and we can send it to you to create the drawing. See attached photo. Also needed is an actual RFQ based off your drawing that we can send to manufacturing companies. Thank you
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: United States

P****LLC
 [?]
Sign in to view client's details.
| P****LLC
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 8d, 16h  |   24 Proposals
I need assistance building a CAD template based off my sketches of carbon fiber parts for a 'micro drone'. Creative input is welcome.
Category: CAD       

b****fpv
 [?]
Sign in to view client's details.
| b****fpv
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job