Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $100 or less   |  Posted: 3h, 11m ago  |  Ends: 29d, 20h  |   0 Proposals
Create the Robot Structural Analysis file using the attached plans. It's a 7-storey, small RC old building in Imperial Units, i.e. ft, kip (1000 lb-f), etc. For elastic analysis only, and therefore no rebar details are necessary for input. Required inputs: (1) physical dimensions of Column, beam, slab, wall, staircase, water tank (2) Live load, dead load and wind load Must be completed in 7 days. Immediate one-off payment AFTER completion of job.
Category: Civil & Structural       

m****ung
 [?]
Sign in to view client's details.
| m****ung
|    Hong Kong SAR, PRC
Fixed Price: $50 - $80   |  Posted: 5h, 19m ago  |  Ends: 1d, 18h  |   0 Proposals
I'm looking for someone who is knowledgeable of the REScheck Software Version 4.4.4 I need to generate a Envelope Assemblies table showing Gross Area, Cavity R-Value, Cont. R-Value, Glazing or Door U-Factor, UA. This should be a simple job if you know anything about Rescheck
Category: Civil & Structural       
Skills: 3D Modeling, Architecture, AutoCAD       

t****013
 [?]
Sign in to view client's details.
| t****013
|    United States
Fixed Price: Less than $500   |  Posted: Apr 18, 2014  |  Ends: 13d, 20h  |   3 Proposals
1. Required Theoretical calculation for the Design of Ground Screw if Soil Test Report for a particular location is provided. Which parameters from the soil test report are required for the design of Ground Screw. Attached : A Brief Intro of Ground Screw.
Category: Civil & Structural       

G****Int
 [?]
Sign in to view client's details.
| G****Int
|    India
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Apr 17, 2014  |  Ends: 13d, 12h  |   4 Proposals
Need someone with AGTEK Earthworks 4D to create an earthwork estimate. It is for a roadway and we will need cut / fill quantities plus a model shown on google earth.
Category: Civil & Structural       
Skills: 3D Modeling, Architecture, Civil Engineering       

t****tph
 [?]
Sign in to view client's details.
| t****tph
|    United States
Fixed Price: Less than $500   |  Posted: Apr 16, 2014  |  Ends: 12d, 10h  |   2 Proposals
Need a traffic control plan for subject site We are proposing to remove and replace 2 driveways along Harbor near Orangewood and 2 in the local street behind our site. We have the existing striping plan for Harbor Blvd. in pdf. format
Category: Civil & Structural       
Skills: AutoCAD       

t****oup
 [?]
Sign in to view client's details.
| t****oup
|    United States
Fixed Price: Not Sure   |  Posted: Apr 16, 2014  |  Ends: 11d, 20h  |   5 Proposals
A concrete design needs to be changed to Timber Frame design using the Stick framing method of construction,In a multilple structure Resort Project , initially one trail is to be converted , with shop drawings, for a prototype to be built , thereafter there are many structures in the Project which need to be done if approved
Category: Civil & Structural       

t****ngs
 [?]
Sign in to view client's details.
| t****ngs
|    China
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 15, 2014  |  Ends: 11d, 14h  |   5 Proposals
Assignment The Chief Executive Officer of a major construction company has commission you as an external consultancy to provide a report on the changing role of project managers. The report will be used to guide: the company's procurement strategy; and its approach to project management and the training of its project managers. You need to describe the context of the company under consideration but you may base you answer on a real company of your choice. Discuss how the changes that have taken place in recent years and those that likely to place in the near future will impact on the Role of Project Manager for Major Construction Projects. write 1500 words about just the about Effect of technological advances.
Category: Civil & Structural       

s****gon
 [?]
Sign in to view client's details.
| s****gon *
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Apr 15, 2014  |  Ends: 26d, 13h  |   7 Proposals
the attached document explains the exact job, basically it is to be done using sap 2000, and the temple should be used is attached with the main requirements to tell you how the write up suppose to be. i'm looking for any one is good at Sap and Finite element analysis preferably from a civil engineering background.. it is 8 pages long.
Category: Civil & Structural       

s****gon
 [?]
Sign in to view client's details.
| s****gon *
|    United Kingdom
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 15, 2014  |  Ends: 3d, 3h  |   5 Proposals
I am looking for experienced draftsman to design and provide structure drawings of portable accomodation for a ship. Dimensions of this block will be approx 16x16x10 m. For reference see attached
Category: Civil & Structural       

l****123
 [?]
Sign in to view client's details.
| l****123
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 10d, 13h  |   6 Proposals
Hello: Previously you responded to a request we published in Elance for estimators to perform quantity takeoffs. We were forced to place that request on hold due to projects being placed on hold. We are now preparing to commence work on some of those projects that were previously on hold. We are looking for some outsourced estimators who can perform both conceptual and detailed quantity takeoffs for these projects in all divisions. We especially need estimators that can do take offs on Mechanical, Electrical and Plumbing (M/E/P) systems. Experience with Planswift is a definite requirement in our selection criteria for Estimators. We need to utilize that program such that we can confirm the scope has been captured. Please reconfirm that you utilize Planswifth. If you are interested in providing estimating services to us at the rates you previously quoted, please send us your contact information (including E-Mail for sending project plans). Thank you. Best regards, Paul B. Goulding, PM...
Category: Civil & Structural       

j****ing
 [?]
Sign in to view client's details.
| j****ing
|    United States
Fixed Price: Not Sure   |  Posted: Apr 14, 2014  |  Ends: 10d, 8h  |   12 Proposals
We are looking for a quantity surveyor to our some of our projects. We need a to get estimate/ cost on our ongoing project. Please let me if you can do this and I will forward the drawing and blank invoices to you. Thank you.
Category: Civil & Structural       
Skills: Architecture, AutoCAD, Civil Engineering       

I****lar
 [?]
Sign in to view client's details.
| I****lar
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 10d, 1h  |   9 Proposals
Complete the takeoffs for the new design and submit into a home pricing software program ready to for final pricing Must be able to turn these task around within 24 hours There will be plenty of work here that may lead to a full time position Must be able to follow instructions and complete with very little number of changes per task Must be available to skype, prefer using voice skype The designs will be be New South Wales, Australian standard building codes Original house plans in cad or pdf will be supplied
Category: Civil & Structural       
Skills: building estimator, quantity survey       

t****nan
 [?]
Sign in to view client's details.
| t****nan
|    Australia
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 14, 2014  |  Ends: 9d, 22h  |   0 Proposals
Translate document from English to Vietnamese and vice versa. Technical and Insurance document are prefered.
Category: Civil & Structural       
Skills: Civil Engineering       

N****huy
 [?]
Sign in to view client's details.
| N****huy
|    Vietnam
Fixed Price: $500 - $1,000   |  Posted: Apr 13, 2014  |  Ends: 9d, 17h  |   6 Proposals
I need to build a new 2 story house with about 1800 square foot living space and 2 car garage. I have floor plan, site plan, elevations as well as electrical plan ready. I need engineering plans (Structural, foundation, etc). These plans need to be done by someone who is licensed. The property is located in Culver City, California. I have plans in pdf as well as CAD drawings which I will provide. After plans are submitted to city and there are any corrections, these corrections need to be made as well Foundation and structure needs to be good quality since California is earthquake zone. Plans need to meet required quality standards
Category: Civil & Structural       

t****wal
 [?]
Sign in to view client's details.
| t****wal
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 13, 2014  |  Ends: 9d, 4h  |   2 Proposals
Hi, I need a hydraulic simulation model to be built using AFT Impulse. Model includes a surge tower in between to determine required pipe pressure in case of power loss which might induce water hammer due to vertical differences in pipes. The model is to be built using a shared screen viewer (team viewer or something else). The other aim of the project is to tutor me in building/expanding the model.
Category: Civil & Structural       
Skills: Civil Engineering, hydraulics, pipe networks       

p****203
 [?]
Sign in to view client's details.
| p****203
|    Indonesia
Hourly Rate: Less than $10 / hr   |  Duration: 7-9 months  |  Posted: Apr 12, 2014  |  Ends: 8d, 14h  |   14 Proposals
gran desempeņo en el desarrollo de trabajos en autocad como dibujar planos, escalar imagenes y tomar coordenadas.
Category: Civil & Structural       

j****v10
 [?]
Sign in to view client's details.
| j****v10
|    Colombia
Fixed Price: Less than $500   |  Posted: Apr 12, 2014  |  Ends: 7d, 21h  |   1 Proposal
Design and structural calculations. Shop Drawings (Autocad) Prepare Engineering plans, elevation plans, structural plans and specifications for the proposed project. Prepare for the structural design of the proposed building. Prepare bill of materials / estimate for the proposed project. Experience in Primavera Project Management Planning software. Prepare Video presentation for presentation purposes.(Portfolio)
Category: Civil & Structural       

r****enj
 [?]
Sign in to view client's details.
| r****enj
|    Philippines
Fixed Price: Not Sure   |  Posted: Apr 11, 2014  |  Ends: 7d, 11h  |   1 Proposal
The job consists of reviewing the project design as to provide the necessary consulting and recommendations that can enable the project to obtain a "LEED Certified" level approval, prepare and submit the package, and obtain the certification. Hollywood Charter is a new build charter school in Hollywood, Florida. Please review attached drawings for technical description of the site and building. Primary criteria for awarding: price, availability, location.
Category: Civil & Structural       
Skills: Architecture, Civil Engineering       
Preferred Location: United States

M****per
 [?]
Sign in to view client's details.
| M****per
|    United States
Fixed Price: Not Sure   |  Posted: Apr 11, 2014  |  Ends: 7d, 0h  |   5 Proposals
Based in Australia, we are developing a new Eco House design using the Sip Panel construction method Prefer if you have previous experience using the SIP panel construction, or are willing to give it a go Structural engineering will be the main focus at this stage For the first job, its to do structural engineering for a 2 level townhouse 3 bedroom 2 bathroom If you are an Architect with engineering experience or understanding, then working on design and structural engineering would be ideal After the first trial, there will be ongoing work for using the same structural methods and construction but for different size houses and designs Please provide a price structure to begin with and some examples of previous work
Category: Civil & Structural       

t****los
 [?]
Sign in to view client's details.
| t****los
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 10, 2014  |  Ends: 6d, 19h  |   0 Proposals
Had new roof put on in Oct /13,but the contractor did not send out engineer to get form or inspection on roof
Category: Civil & Structural       

b****wms
 [?]
Sign in to view client's details.
| b****wms
Fixed Price: $700 - $1,000   |  Posted: Apr 10, 2014  |  Ends: 6d, 15h  |   0 Proposals
I need a licensed civil engineering in the State of Nevada for a grading plan. This job is for civil engineer licensed in Nevada only, no foreign bids.
Category: Civil & Structural       
Skills: ANSYS, AutoCAD, Civil Engineering       

t****013
 [?]
Sign in to view client's details.
| t****013
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 10, 2014  |  Ends: 6d, 13h  |   9 Proposals
GEOQUAKE is a California based engineering consulting company in existence since 2009. The GEOQUAKE group consists of highly skilled professional in geotechnical engineering, engineering geology, civil engineers, and land surveyors. GEOQUAKE's service areas is unlimited, we have performed projects in North America, South America, and Asia. Being a growing company, we are looking for highly experienced engineers to help our professionals. We are looking for engineers who possess excellent English writing skills and be able to perform engineering analysis and write geotechnical reports as directed by our professionals. Please submit your contact information (
Category: Civil & Structural       

z****eji
 [?]
Sign in to view client's details.
| z****eji
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 10, 2014  |  Ends: 6d, 12h  |   5 Proposals
GEOQUAKE is a California based engineering consulting company in existence since 2009. The GEOQUAKE group consists of highly skilled professional in geotechnical engineering, engineering geology, civil engineers, and land surveyors. GEOQUAKE's service areas is unlimited, we have performed projects in North America, South America, and Asia. Being a growing company, we are looking for highly experienced engineers to help our professionals. We are looking for engineers who possess excellent English writing skills and be able to perform engineering analysis and write geotechnical reports as directed by our professionals. Please submit your contact information (
Category: Civil & Structural       

z****eji
 [?]
Sign in to view client's details.
| z****eji
|    United States
Fixed Price: $20 - $30   |  Posted: Apr 10, 2014  |  Ends: 6d, 6h  |   1 Proposal
I need a Structural Plan, Plumbing Plan, Electrical Plan, Estimation for construction as per architectural plan enclosed, This is a construction of Residential houses in plot of 20*60 North facing plot. 1) Structural Engineering Plan should be provided for G+3 Construction 2) Estimation for Construction should be provided for G+1 Construction estimating to 40,00,000 3) Plans & Estimation should be authorized(Signed and Seal) by Licensed Civil Engineer. Sample Estimation can also be given for our requirement.
Category: Civil & Structural       
Preferred Location: India

c****lli
 [?]
Sign in to view client's details.
| c****lli
|    India
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 10, 2014  |  Ends: 6d, 5h  |   24 Proposals
I have around 20 marine structure drawings which are scanned pdf and need to convert them in autocad drawings.
Category: Civil & Structural       
Skills: AutoCAD, Drawing       

l****123
 [?]
Sign in to view client's details.
| l****123
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job