Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 7 days
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 5d, 7h  |   13 Proposals
We have a camera / scanner that we use in the manufacturing. We need to mount an air nozzle to it to protect the face from the environmental I have attached a sketch in powerpoint as well as the cad of the air nozzle. we are looking for mechanical services for some updates to the retention of the scanner and the air knife retention to the scanner.
Category: Mechanical       

I****ual
 [?]
Sign in to view client's details.
| I****ual
Fixed Price: Less than $500   |  Posted: Aug 24, 2015  |  Ends: 3d, 17h  |   30 Proposals
With a provisional patent there is a need to get not only CAD drawings but either a working prototype or a 3D printer rendering to work with on the various case designs. Further details after a NDA is signed.
Category: Mechanical       

S****013
 [?]
Sign in to view client's details.
| S****013
|    United States
Fixed Price: Less than $500   |  Posted: Aug 19, 2015  |  Ends: 6d, 12h  |   1 Proposal
Looking to have a stroller designed, with several accessories, radio, usb, cooler, etc.... We want something like the design pictures included directions blk/wht. We have base stroller model pictures in attachment. A plus if you have worked on similar projects. Message for more details.
Category: Mechanical       

u****001
 [?]
Sign in to view client's details.
| u****001
|    United States
Fixed Price: More than $10,000   |  Posted: Aug 18, 2015  |  Ends: 5d, 5h  |   12 Proposals
We are looking for engineering services for our project. The scope of the work are : 1. Engineering / validation & optimization on the basis of the current works & material 2. Outsourcing (BOM) detailed list of components /cost price/ all specs / suppliers etc.. 3. The making of prototype(s)(+1) head of series to be "homologated"/ certified 4. Homologation certification + Documents & tests 5. Assembly line certification quality control process for assembly procedure ISO 9001
Category: Mechanical       

j****on3
 [?]
Sign in to view client's details.
| j****on3 *
|    Belgium
Fixed Price: More than $10,000   |  Posted: Aug 18, 2015  |  Ends: 5d, 3h  |   16 Proposals
We are looking for engineering services for our project. The scope of the work are : 1. Engineering / validation & optimization on the basis of the current works & material 2. Outsourcing (BOM) detailed list of components /cost price/ all specs / suppliers etc.. 3. The making of prototype(s)(+1) head of series to be "homologated"/ certified 4. Homologation certification + Documents & tests 5. Assembly line certification quality control process for assembly procedure ISO 9001
Category: Mechanical       

j****on3
 [?]
Sign in to view client's details.
| j****on3 *
|    Belgium
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 17, 2015  |  Ends: 4d, 8h  |   5 Proposals
see the attached files. and let me know whether you can do it with 100% accuracy. Budget is 10 usd
Category: Mechanical       

l****jay
 [?]
Sign in to view client's details.
| l****jay
|    Sri Lanka
Fixed Price: Not Sure   |  Posted: Aug 17, 2015  |  Ends: 3d, 23h  |   2 Proposals
Need a web site to be designed and built for selling and marketing pipe line equipments to oil & gas clients in Australia, NZ and PNG. Business is B2B and does not involve selling online. Website mainly contains our product photos, contact details and a few other information
Category: Mechanical       
Preferred Location: North America, Middle East & Central Asia, Australia/Oceania

i****ies
 [?]
Sign in to view client's details.
| i****ies
|    Australia
Fixed Price: $500 - $1,500   |  Posted: Aug 17, 2015  |  Ends: 3d, 22h  |   9 Proposals
Looking for a simple machine that has the ability to roll up a traditional household paper towel, as close to it's original state as possible. We need to print on several hundred paper towels for an upcoming event. We have purchased an HP T120 Designjet printer and have configured it to allow a paper towel to be rolled through and printed on using the paper roll feeder. As the paper towel roll is unwound and fed through the printer, we need a machine on the other end that winds the roll back up. Ideally, we would like to attach the first sheet of the roll to a new cardboard paper towel core. As the printer prints, the machine would slowly roll the paper towel sheets back up. So that, once the entire roll has been fed through the printer, the roll would be rolled back up on this machine, close to it's original state. Ideally, the machine would have the ability to detect any slack and automatically wind it to a certain tension point. It would also ensure that it rolls back up centered...
Category: Mechanical       
Skills: Mechanical Engineering       
Preferred Location: North America

i****ett
 [?]
Sign in to view client's details.
| i****ett
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 16, 2015  |  Ends: 3d, 4h  |   11 Proposals
We are seeking an individual with experience in Mechanical and electrical Engineering to develop a product. This is a motor controlled product which is to be used by general consumer.
Category: Mechanical       

a****ani
 [?]
Sign in to view client's details.
| a****ani
|    United Arab Emirates
Fixed Price: $100 - $120   |  Posted: Aug 14, 2015  |  Ends: 1d, 16h  |   4 Proposals
It is an applied Mechanics research work which is aimed in determining the This project involves analysis of vibration and acoustic emission data measured on rolling element bearings. The measurements were taken under good and defective conditions and the objective of this project is centered on extracting the most sensitive parameters from the data to indicate the state of mechanical integrity of the bearing. All measured data would be given and it is expected to undertake the analysis with MATLAB.
Category: Mechanical       

y****thy
 [?]
Sign in to view client's details.
| y****thy
|    Nigeria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 14, 2015  |  Ends: 1d, 11h  |   23 Proposals
I am currently in the process of designing a rotational moulding machine I can design and sketch the actual machine myself however I need assistance with the following: Size of electrical motors to be used Gearing Size of shafts to be used I will provide information on what weights and speeds the machine should run at. I will also provide sketches. I can also provide videos showing similar machines in operation. I need the expertise and knowledge of a mechanical engineer to calculate motor sizes and shafts sizes, is this something that you would be interested in assisting with? I look forward to hearing from you. Kind Regards, Mark
Category: Mechanical       
Skills: Mechanical Engineering       

M****896
 [?]
Sign in to view client's details.
| M****896
|    Ireland
Fixed Price: About $300   |  Posted: Aug 14, 2015  |  Ends: 1d, 10h  |   5 Proposals
We just need someone to make this remote control ball. The ball needs to be 50 cm in diameter and capable of carrying a load of 10 kgs (excluding the batteries) while travelling with max speeds of 30km/hr . You just need to follow this instructables.   [obscured]  /id/Remote-Controlled-Basket-Ball-Robot/
Category: Mechanical       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: Less than $500   |  Posted: Aug 14, 2015  |  Ends: 1d, 4h  |   1 Proposal
I need help in this automotive project. The details are attached in the file below. Topic: Active Damping and Throttle Control in formula student in efficient and stable cornering. The attached file is sample to let you understand what kind of report we needed. Reply ASAP use simpack 9.7 to open the demo car......the main aim of reducing the throttle is to check or improving the stability of the vehicle in cornering.....and in the active damping you have to work on the suspensions of the vehicle.... sample models are within the documentation of simpack , in the help options. Check the help file While working in simpack amplitude of excitation must be zero, In order to work on active damping : Step 1:right click on tracks step 2: Activate track vehicle globals Step 3: Stifness vehicle damping. and work on the following things in Trottle control: Drive: 1.Velocity actual 2.Velocity desired 3.Actual input value 4Actual output value 5Actual value of funtion ========== Targets to ac...
Category: Mechanical       

l****mal
 [?]
Sign in to view client's details.
| l****mal *
|    India
Fixed Price: $100 - $120   |  Posted: Aug 13, 2015  |  Ends: 12h, 8m  |   1 Proposal
The titile of my project is :Two dimensional modelling of sand production, using Finite volume to solve the governing equation and then use C++ to program.A C++ Visual code would be used to solve a 2Dimensional Navier stoke's equation in order to predict the critical drawdown pressure. I have been able to obtain the governing equation and discretise using finite volume.I was given a 1 dimensional problem of conduction using C++ to obtain the Temperature Distribution at a particular boundary conditions(Top and Bottom -Insulated, Left-Dirichlet, Right-Convective) and i was able to use c++ to show the temperature distribution of the rod. Now i have a 2Dimensional Navier stoke's equation which has the Energy equation,Momentum and Pressure Equation which i have to solve for a flow in a pipe and obtain the Temperature,U and V velocity, then the pressure distribution in the pipe. After solving the Navier stoke's equation , i would also need to incorporate the code to determine the critical dr...
Category: Mechanical       

y****thy
 [?]
Sign in to view client's details.
| y****thy
|    Nigeria
Hourly Rate: Not Sure   |  Duration: 7-9 months  |  Posted: Jul 31, 2015  |  Ends: 1d, 22h  |   2 Proposals
We need someone to create HIT jobs on amazon mechanical turk (HITs - Human Intelligence Tasks). We tell you the task that needs to be done and you set it up on   [obscured]   so that people can do it. You manage the process.
Category: Mechanical       
Skills: Mechanical Turk API       

V****ell
 [?]
Sign in to view client's details.
| V****ell *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 23, 2015  |  Ends: 3d, 12h  |   11 Proposals
I need engineers and physicists for a particular national project. It involves manufacturing of modern warfare equipments. Submit proposals and past project samples(or possible ideas)
Category: Mechanical       

P****ist
 [?]
Sign in to view client's details.
| P****ist *
|    Nigeria
Fixed Price: Not Sure   |  Posted: Jul 03, 2015  |  Ends: 3d, 2h  |   15 Proposals
Hi I am doing some work on the subject above using vibration analysis. So if you are good at MatLab and signal processing we can start from there. Regards
Category: Mechanical       
Skills: Mechanical Engineering, Mechanical Eng       

A****ari
 [?]
Sign in to view client's details.
| A****ari
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job