Save this Search
     
Sort by:
  • Posted Date
Product Design
Fixed Price: Not Sure   |  Posted: 46 minutes ago  |  Ends: 14d, 22h  |   3 Proposals
Create 26.6cm (10.5") adjustable metal arm based on the attached image. Please also study this page:   [obscured]  /noga-arms-by-matthews.html Here is a video that demonstrates how the product will be used:   [obscured]  /94221520 Here are some specifics about the project: - Our design will include a 1/4-20 thumb-nut on the top rather than a recessed threaded hole. - File must be natively created in SolidWorks. - Submit .EASM files to me during the drafting stage. If you don't know what an .EASM file is, then please don't apply for this position. The first time I open your .EASM file it must open correctly. No accidentally suppressed features or geometry in the wrong place. Therefore, test your files before sending them to me. - Aesthetics matter. Be prepared for me to be very, very picky about the symmetry, beauty and aesthetic balance of your design. - You must speak English fluently. Thank you!
Category: Product Design       

h****agi
 [?]
Sign in to view client's details.
| h****agi
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 57 minutes ago  |  Ends: 14d, 22h  |   0 Proposals
I am looking for someone to convert designs from clip art to embroidery and applique designs. These would be simple designs for children's clothing.
Category: Product Design       

k****and
 [?]
Sign in to view client's details.
| k****and
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 17m ago  |  Ends: 14d, 15h  |   3 Proposals
Redesign a new line for the attached appliances, 5 at total. This new line should have round shapes. Please give us your best price and delivery time for this jobs request.
Category: Product Design       

J****rfi
 [?]
Sign in to view client's details.
| J****rfi
|    Hong Kong SAR, PRC
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 47m ago  |  Ends: 14d, 14h  |   0 Proposals
We are a plastic rotational moulding business which is looking to grow via introduction of new products. Rotational moulding is a low volume process and lends itself to products such as water tanks, IBC's, drainage channels, grit bins, material handling products on building sites, street furniture etc...... We will guide you in terms of the products we would like to research and design. Therefore the role will involve: - researching the market for that product i.e. current designs, who are the competition, what are the price points, what is good and bad in terms of existing products in the market; - field research i.e. talking to purchasers of that product and understanding what is good and bad about the existing products in the market. Observing how the products are used; - designing the product using 3D CAD software; - understanding the cost of then producing that part (assistance will be given in this area) and the cost of the tooling; - Writing a report to senior management se...
Category: Product Design       
Preferred Location: United Kingdom

T****y68
 [?]
Sign in to view client's details.
| T****y68
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 58m ago  |  Ends: 14d, 13h  |   1 Proposal
I would like to design an ethnic fashion doll and then bring that design to life. I need 1 or 2 working models afterwhich I plan to execute a kickstarter campaign to manufacture more.
Category: Product Design       
Preferred Location: North America, India/Southern Asia, Africa

l****aem
 [?]
Sign in to view client's details.
| l****aem
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 21m ago  |  Ends: 14d, 11h  |   2 Proposals
Innovative design that our startup is focusing on. Looking for a striving individual to help grass root the prototype and possibly join our team going forward. NDA and in-person meeting required.
Category: Product Design       

v****ler
 [?]
Sign in to view client's details.
| v****ler
|    United States
Hourly Rate: More than $50 / hr   |  Duration: 4-6 months  |  Posted: 13h, 35m ago  |  Ends: 14d, 9h  |   10 Proposals
Expertise in multiple machine learning and Bayes methods algorithms Experience with technical computing languages such as MATLAB or R Knowledge of C++, Python, or Java Experience with object-oriented design and implementation Ability to analyze raw data and analyze using gabor transform for speech and vibrational analysis a big plus
Category: Product Design       

r****esh
 [?]
Sign in to view client's details.
| r****esh
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 19h, 49m ago  |  Ends: 14d, 3h  |   1 Proposal
I need someone who can create a prototype for me of a piece of lacrosse equipment. I want to design an athletic compression sleeve that runs from the rest to the middle of the bicep that has 2"-4" of relatively thin padding going around the forearm about 1" up from the wrist. This product will be designed for youth lacrosse players whose parents are concerned with safety and have to buy larger pads for their kids so their arms are completely covered up. I just need 1-2 sleeves created in white and black.
Category: Product Design       

a****st8
 [?]
Sign in to view client's details.
| a****st8
|    United States
Fixed Price: Less than $500   |  Posted: 19h, 52m ago  |  Ends: 14d, 3h  |   5 Proposals
Hello, I'm looking for someone who can provide a prototype for silicon template no bigger then a A5 and about 3mm thick. I can provide clearer details later. I don't have any 3D drawings but I have a clear picture, Its pretty simple so shouldn't need one. Once happy with prototype would want to order in bulk starting from 500 upwards so would need quotes on 1. prototype 2. Each unit on min order of 500. We look to bring out more products in the future so would like to find someone capable of a good and well priced job. Thanks, Tom
Category: Product Design       

b****oys
 [?]
Sign in to view client's details.
| b****oys
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: 21h, 18m ago  |  Ends: 6d, 2h  |   6 Proposals
We need a freight friendly packaging design for our product. The products (four of them) are large, in rough terms 50" x 20" x 20' and weighs 50lbs.We are seeking one solution for the four very similar styled procucts. The product is mostly wrought Iron, but easily bent. There are several accessories that need to be packed with the main product one of which are two glass plates. We do not want to use Polystyrene if possible, not for 'eco' reasons but more about cost. We need to be able to stabilise it for a journey from Europe to the USA by sea, then by truck to parts of the USA. If you have experience in developing simple effective solutions for large scale packaging like this, show us what you have done in this area and tell us how much to make the perfect solution for us. We will happily share more information including full CAD drawings and detail with people who we shortlist for this job.
Category: Product Design       

B****cca
 [?]
Sign in to view client's details.
| B****cca
|    New Zealand
Fixed Price: Less than $500   |  Posted: 23h, 10m ago  |  Ends: 13d, 23h  |   22 Proposals
We have a basic design of a machine but would like to have some minor design changes made to make it look more modern. Looking for 3-4 different cosmetic design changes.
Category: Product Design       

I****PRP
 [?]
Sign in to view client's details.
| I****PRP
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 13d, 8h  |   10 Proposals
Hi There, We based in Asia, Singapore and have an invention that we would like to bring to a prototype stage. The idea is in it infancy, that said, we have a pretty strong understanding of what we want and the product features. I'd be looking for the following services to cover design and development of the product. Hardware Design and Testing, Prototypes etc. Product assessment and market viability. I.P Strategies and Patent viability. SWOT analysis, product assessment. Of course with all of the above we wil be involved at every level. We previously have designed products and patented them, but nothing like the current idea in discussion. The idea would require someone with engineering and technical know how to bring the product to life by engineering and designing a working prototype and ultimately manufacturing. I see on your profile you offer end to end solutions on the engineering side and the technology assessment side, we currently in the process to identify the right p...
Category: Product Design       

R****hpr
 [?]
Sign in to view client's details.
| R****hpr
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 13d, 6h  |   3 Proposals
I currently have a prototype for a new portable comfort headrest that was designed by one of the engineer. Overall, the design and prototype turned out fine. However, it needs a slight changing in terms of securing and adjusting it. Right now, the prototype carries a strap that holds the device behind any seats, but my concern is about safety, secured device and better idea to adjust the device instead of using straps. I would like to know, if you can finish the design with better secure and help me to built the new prototype as soon as possible. The project is done and design properly. As I mentioned, it just need a slight changing . This project won't take long. I will share the pictures of design and actual prototype as we go along. Also, I am looking for a packaging design for this portable headrest. Please contact me regarding this new product. Good day.
Category: Product Design       
Skills: 3D Modeling, Manufacturing Design       

h****l81
 [?]
Sign in to view client's details.
| h****l81
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-3 months  |  Posted: Feb 25, 2015  |  Ends: 28d, 5h  |   16 Proposals
Work with CEO to design, prototype, test to market and manufacture for 1,000 units 1st order Up to 24,000 units. Would like a design studio with a team that can handle all the aspects mentioned above cost effectively and quality high performance work. The product is an electronic consumer product comparable to a usb flash drive for smartphone devices. Please contact us for more info.
Category: Product Design       

C****aCo
 [?]
Sign in to view client's details.
| C****aCo
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: 4-6 months  |  Posted: Feb 25, 2015  |  Ends: 13d, 4h  |   6 Proposals
Looking for a person to design and build a prototype of device using Mesh networking technology. The device will be used in the elder care industry and requires a high degree of system fault tolerance. The device will have both audio and video two way communication features. Individual must have the ability to design the prototype and the follow on production model. In addition must be able to assist in FCC certification if necessary.
Category: Product Design       

t****ech
 [?]
Sign in to view client's details.
| t****ech
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 5d, 3h  |   5 Proposals
SUMMARY: Two bracelets that communicate with each other. One as a transmitter, and the other as a receiver. DETAILS: 1) The product is designed so that a parent wearing a transmitting bracelet (parent bracelet) can press a button and the child wearing the receiving bracelet (child bracelet) receives a signal. The bracelet will have a look similar to that of a popular health bands. 2) We will also need to find a local place to manufacture these (ultimately, for the US market). So, you might need some connections to get this project ;-) 3) Please note that Bluetooth & WiFi are not what we are looking for. Because Bluetooth will not have enough range and WiFi is not always available in place like churches and other gatherings. Think more like a remote for a car.
Category: Product Design       
Preferred Location: India/Southern Asia, Eastern Asia

M****gue
 [?]
Sign in to view client's details.
| M****gue
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 25, 2015  |  Ends: 13d, 1h  |   3 Proposals
I need a device that fits into our patient lift ceiling track that will stop the motor from moving along the track when physical therapy in being performed. The motor moves along the track on a set of wheels so the device would act like a wheel chalk. It needs to be enabled and disabled by pulling a cord or attaching a reaching handle to the device given the track is typically 9 ft off the floor. It must be very secure so the motor will not move. Please see the attachment for track specs and motor attachment details.
Category: Product Design       

s****gus
 [?]
Sign in to view client's details.
| s****gus
|    United States
Fixed Price: Not Sure   |  Posted: Feb 25, 2015  |  Ends: 12d, 22h  |   14 Proposals
My company is looking to hire an engineer/designer who has experience engineering remote controlled vehicles. We are starting with a platform toy and would like to develop an extension that incorporates Bluetooth RC technology. We are looking for an engineer or team of engineers and designers with the following skillset: 1) Ability to work with us on initial concept design. 2) Must be well versed in designing around motors, battery supply, and Bluetooth technology. 3) We are a very experienced product development company but do not currently offer anything using this type of technology. We are looking for a team to help engineer the complex moving parts of this toy. We have established plastic manufacturing and are looking for the integration with RC technology. We will be making decisions based on work experience so please provide examples.
Category: Product Design       

a****gns
 [?]
Sign in to view client's details.
| a****gns
|    United States
Fixed Price: Not Sure   |  Posted: Feb 24, 2015  |  Ends: 12d, 10h  |   7 Proposals
I am looking for an Engineer to assist me in engineering a protein powder dispenser machine. I would be a gumball style dispensing machine which can hold one or two different powders (protein)
Category: Product Design       

a****rra
 [?]
Sign in to view client's details.
| a****rra
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Feb 24, 2015  |  Ends: 12d, 9h  |   9 Proposals
I currently have a prototype for a new portable comfort headrest that was designed by one of the engineer. Overall, the design and prototype turned out fine. However, it needs a slight changing in terms of securing and adjusting it. Right now, the prototype carries a strap that holds the device behind any seats, but my concern is about safety, secured device and better idea to adjust the device instead of using straps. I would like to know, if you can finish the design with better secure and help me to built the new prototype as soon as possible. The project is done and design properly. As I mentioned, it just need a slight changing . This project won't take long. I will share the pictures of design and actual prototype as we go along. Also, I am looking for a packaging design for this portable headrest. Please contact me regarding this new product. Good day.
Category: Product Design       
Skills: 3D Modeling, Manufacturing Design       

h****l81
 [?]
Sign in to view client's details.
| h****l81
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 24, 2015  |  Ends: 12d, 1h  |   13 Proposals
I need someone who has the ability to go ahead and design a bar that is roughly about 3 feet long with one end big enough to fit a bar roughly 2inches in diameter and have a handle at the other end
Category: Product Design       

F****993
 [?]
Sign in to view client's details.
| F****993
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Feb 24, 2015  |  Ends: 11d, 23h  |   2 Proposals
I'm looking to sell a tenor pad with a harness to carry it as one complete package. I'm a young percussionist myself and recognize the usefulness of a harness that can carry your tenor pad so you can practice marching with it. I have attached a photo of what a typical tenor harness looks like, and a photo of an average drum pad. The pads are usually made of wood, and the "heads" I would prefer to be made of Kevlar. In total, if possible, I would like it to weigh in around 20 lbs. If it is simpler to design a harness that can attach to any tenor pad, that will be alright too. I'm willing to work with you on the details. I would prefer to see a finished 3D model of the product as the final project.
Category: Product Design       
Skills: 3D Design       

S****z55
 [?]
Sign in to view client's details.
| S****z55
|    United States
Hourly Rate: $30 - $100 / hr   |  Duration: Not Sure  |  Posted: Feb 24, 2015  |  Ends: 26d, 18h  |   19 Proposals
We are a fashion jewellery manufacturer and retailer. We are looking for multiple jewellery designers to join our rapidly expanding international team: You will work with our team to come up with new designs, you should be comfortable drawing / redrawing / editing from existing base designs. You should be able to work both by hand and using any 3D program capable of exporting in obj / stl and be able to communicate effectively in written english with the team. This is a flexible role and we have part time and full time position available. Link / Enclose your portfolio with you application.
Category: Product Design       

y****ooo
 [?]
Sign in to view client's details.
| y****ooo
|    Australia
Fixed Price: Not Sure   |  Posted: Feb 23, 2015  |  Ends: 86d, 7h  |   8 Proposals
If you can create a drone and remote control flying objects, you are the one I am seeking. My invention requires a melding of both concepts.
Category: Product Design       
Preferred Location: North America, India/Southern Asia

C****3rd
 [?]
Sign in to view client's details.
| C****3rd
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job