Save this Search
     

All JobsEngineering & ManufacturingHourly

 (258 results)  
Sort by:
  • Posted Date
Hourly
Hourly Rate: $10 - $15 / hr   |  Duration: 1-3 months  |  Posted: 6h, 6m ago  |  Ends: 14d, 17h  |   5 Proposals
Need a civil 3d expert - experience with topographies - model pipe networks - model roads and sidewalks
Category: Civil & Structural       

t****tph
 [?]
Sign in to view client's details.
| t****tph
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 7h, 6m ago  |  Ends: 14d, 16h  |   12 Proposals
We are looking to meet and build a long term relationship with an experienced agent, with years of sourcing products from China, Taiwan, and India. Looking forward to hearing from you.
Category: Product Design       

M****e-M
 [?]
Sign in to view client's details.
| M****e-M
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 12m ago  |  Ends: 14d, 16h  |   9 Proposals
I need someone to draft model drawings of kitchen cabinets, entertainment centers, etc from the designs I specify.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

a****lam
 [?]
Sign in to view client's details.
| a****lam
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 3m ago  |  Ends: 14d, 15h  |   21 Proposals
HI all, I need 3 drawings completed for 3 electrical cabinets we are having built. Done in cad or illustrator or whatever. Just need to clearly communicate to overseas manufacturer. Attached is something similar used previously for another company. Attached also are photos. First cabinet: battery cabinet 1200 high x 600w x 350 d with 3 internal shelves to support max 75kg per shelf (total 4 batteries stored inside) (for indoor and outdoor installation) (2 x 32mm hole punched in each end of shelves) Air vents covered with vermin mesh (front bottom & back wall high) on skids for indoor and outdoor installation (silver colour paint finish) Second cabinet: battery cabinet 900 high x 1200 wide x 600 deep with 3 internal shelves to support max 400kg per shelf 2 x 32mm hole punched in each end of shelves (total 4 levels of batteries inside) (is it possible for all shelves to be removable?) (on skids for indoor and outdoor installation) Air vents covered with vermin mesh ...
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

h****ory
 [?]
Sign in to view client's details.
| h****ory
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 0m ago  |  Ends: 14d, 14h  |   2 Proposals
I am an architect and i have alot of projects these days and i need perfect freelancer to help to to finish one of this project because there is enough time all files will be attached to awarded freelancer The lroject is private villa ( modern design) may be after that i need a video rounding the bulding
Category: 3D Modelling       
Skills: Architecture, 3D Systems, Autodesk       

h****er0
 [?]
Sign in to view client's details.
| h****er0
|    Egypt
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 10h, 7m ago  |  Ends: 14d, 13h  |   2 Proposals
Immediate opening for highly skilled CNC Programmer skilled in programming vertical machining centers. Must be proficient in the use of Mastercam and have full understanding of G & M code. Must also be proficient in set up and operation of CNC equipment. We are a high mix low volume machining facility. Candidate must be able to produce quality programs on the fly. Reply with resume & compensation requirements.
Category: Other - Engineering &...       

E****ion
 [?]
Sign in to view client's details.
| E****ion
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 7m ago  |  Ends: 14d, 11h  |   4 Proposals
Looking for a local industrial engineer to help us finalize a mold. We have version 1 of the mold complete and want to move to version 2 immediately. Located in Boca Raton.
Category: Product Design       
Skills: AutoCAD, 3D Systems       

H****Max
 [?]
Sign in to view client's details.
| H****Max
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 13h, 6m ago  |  Ends: 14d, 10h  |   15 Proposals
I have a Basement Design project. I have existing plans , pictures and a description of the scope of the work . - We have to dig about 12- 15 inches to increase ceiling height , They also want a small powder room with a urinal a small wine celler in a corner storage closet ventilation for a smoking area surround system French drain and water proofing removal of azbestos pipe I need someone that can provide me with 1) Architectural Drawings of our existing conditions 2) 2 design layout options. ( we already have one that client likes and we will give it to you ) after we decide one one - 3)proposed plans, 4) sections and details 5) Construction Documents 6) Renderings 7) FFE we are a construction company and this might be a repeat gig - consider that when you bid . Also include samples of similar work .
Category: Architecture       

d****ing
 [?]
Sign in to view client's details.
| d****ing
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 34m ago  |  Ends: 14d, 9h  |   0 Proposals
My company is looking to expand into the fashion market. Currently, we are looking for a professional fashion designer to create the latest designs that can will turn heads in the market. We have a full team behind you!!!!
Category: Product Design       

S****rry
 [?]
Sign in to view client's details.
| S****rry
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 17m ago  |  Ends: 2d, 7h  |   10 Proposals
We are looking for someone to design, draft 3d photos, cad cam design for a fully operational innovative mechanical water pick for teeth. Due to the sensitivity and proprietary nature of the product design - a more detailed summary will be supplied to chosen elancer. Please submit your proposal and hourly rate for this project.
Category: Product Design       

b****ich
 [?]
Sign in to view client's details.
| b****ich
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 16h, 42m ago  |  Ends: 14d, 7h  |   8 Proposals
Design 3D enclosure for Moonbeamz bluetooth beacon. NEW PRODUCT: MOONBEAMZ This product is a new type of iBeacon. To learn more about these please look at this website:   [obscured]   The product type is technically a BLUETOOTH LOW ENERGY BEACON. (see PDF deck attached) OUR DIFFERENCE Our beacon is different because the beacon can not only tell distance, it can tell direction. Like a compass. 2 TYPES OF MOONBEAMZ TYPE 1 NAME: "MOONBEAMZ Gemeni" This is a 2-way bi-diectional beacon. DESIGN: THERE NEEDS TO BE A DARK SIDE AND A LIGHT SIDE of this beacon. Like the light side and dark side of the moon. SHAPE: TYPE 1 will look like a HOCKEY PUCK sitting on a plastic stand. (IMAGES ATTACHED in next email) SIZE: 5" DISC diameter x 3/4" wide TYPE 2 NAME: "MOONBEAMZ Cardinal" This is a 4-way beacon that delivers North, South, East, West direction. DESIGN: The OBJECT will actually be ball shaped - a sphere. We need a compass etched on the design showin...
Category: 3D Modelling       
Skills: 3D, Bluetooth       

o****ria
 [?]
Sign in to view client's details.
| o****ria
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 16h, 44m ago  |  Ends: 14d, 7h  |   7 Proposals
want to create a location sensor device. Please let me know if you would be able to help me? What is the duration you are looking for? Regards, Lakshana
Category: Electrical       

l****nap
 [?]
Sign in to view client's details.
| l****nap
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 18h, 59m ago  |  Ends: 14d, 5h  |   5 Proposals
We are working on a house plan, I need to adjust the floor plan as needed to accommodate HVAC supply and return lines and chases. I would like all ducting to be inside the insulated envelope. I would like the following: 1. Analyze the floor plan 2. Draw the supply and return lines 3. Suggest chase placement. The floor plan could be provided in DWG format, Chieft architect is preferred. International applicants must have experience with US HVAC standards. Please do not apply if you don't meet this requirement.
Category: Mechanical       
Skills: AutoCAD, SolidWorks, Mechanical Engineering       
Preferred Location: United States

f****r25
 [?]
Sign in to view client's details.
| f****r25
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 20h, 6m ago  |  Ends: 14d, 3h  |   8 Proposals
My wife and I have recently bought a lot in Virginia. We do not plan to build for a couple of years. My long term goal (with the help of a freelancer) is to come up with three to four designs with enough details that we can use the designs to get bids from builders. My immediate need, however, is to hire a freelancer who can help translate the plot plan into a terrain set up in Home Designer by Chief Architect. It is an odd shaped lot but I think I have the necessary GPS coordinates. Interested?
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

l****230
 [?]
Sign in to view client's details.
| l****230
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 22h, 22m ago  |  Ends: 2d, 1h  |   35 Proposals
We have an existing product that has grown over time from a set of basic drawings into something more complex, and now need to create a new set of CAD drawings for outsourced costing and manufacture.
Category: CAD       
Preferred Location: United Kingdom

s****son
 [?]
Sign in to view client's details.
| s****son
|    United Kingdom
Hourly Rate: $40 - $50 / hr   |  Duration: 1-2 weeks  |  Posted: Jun 29, 2015  |  Ends: 13d, 21h  |   20 Proposals
We are looking for a 3D photo/ real render designer. We are a wood and metal furniture design company with big projects ahead. We fabricate custom wood and metal furniture. We need to quickly produce ten 3D photo real renders of furniture to present to a highly curated group of design professionals. The images will eventually need to be set against a backdrop with lots of natural lighting. We have examples. That's Phase II. With a focus on interior design and architectural renderings for office, restaurant, and retail space, we seek a highly skilled designer to help out on this short term design project. It may lead to a long term arrangement. We have an immediate need for an artist/engineer/designer who can take 3D furniture images and make custom alterations to existing wood and metal designs. This requires altering colors, specs, and making design modifications to existing 3D images. It also requires a designer who has an ability to have his/her own creative perspective and can ch...
Category: Interior Design       

z****lue
 [?]
Sign in to view client's details.
| z****lue
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Jun 29, 2015  |  Ends: 13d, 19h  |   5 Proposals
Looking for an experience RC detailer using EC2 I am looking for someone who can guide me for full detail design. from Ukraine and Romania and other eastern Europeans are welcome
Category: Civil & Structural       
Skills: Structural Engineering       

l****n70
 [?]
Sign in to view client's details.
| l****n70
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 29, 2015  |  Ends: 13d, 19h  |   8 Proposals
Looking for experienced candidates required for estimating take offs: 1. Floor and wall tiling 2. Stones 3. Waterproofing Preference for: 1) Knowledge of Planswift 2) Knowledge of Australian Building Standards 3) MS Office skills Freelancer required for regular take offs to efficiently prepare quantities breakdown and provide summary. Regular take off required ranging from small to large commercial jobs. Thanks.
Category: Other - Engineering &...       

Q****s34
 [?]
Sign in to view client's details.
| Q****s34
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: Jun 29, 2015  |  Ends: 13d, 18h  |   8 Proposals
Hello all, We need someone who is proficient in sketchUp and Layout. It is important that you understand both SketchUp and Layout in terms BIM. It is therefore important that you are able to model neatly and efficiently in SketchUp The job involves two buildings that are nearing the end of their design phases. We need assistance as we resolve the final details in SketchUp and then move onto producing technical documentation for the contractor. Your first task will be to set up Layout Drawings spaces for the models (Plans sections, elevations, details etc.) Thereafter you will be asked to aid us in preparing the models for representation. You will be required to resolve some details as well as identifying and eliminating anomalies and inaccuracies. We require that you work fast but if you are good at sketchup you should already be working fast enough. The two buildings in question are: 1) An industrial facility of 4000m2 with an attached office building of around 1000m2. 2) A Co...
Category: Architecture       
Skills: Architecture, SketchUp Pro, sketchUp Layout       

g****fvw
 [?]
Sign in to view client's details.
| g****fvw
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 13d, 14h  |   5 Proposals
Hi, I need help in the field of power electronics modeling and simulation. I need a professional help in a book I'm currently reading " Power electronics converters modeling and control" by Seddik Bacha. Thanks
Category: Electrical       

R****_PE
 [?]
Sign in to view client's details.
| R****_PE
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 5d, 12h  |   48 Proposals
I need someone to take my "technical" drawings, specifications, and ideas and turn them into CAD drawings that I can submit for prototyping and manufacturing. I've provided 85% of what is needed, I just lack the skill to get that last 15% done. There will be some assistance needed from you to determine fabrication material and tolerances. Currently, I have 8 drawings showing every component of the device and can work daily with you on any questions or specifics you need from me to complete the project. I would prefer someone to provide an hourly rate bid then we can discuss how many hours you will need to complete once you have had a chance to review the drawings and the scope of the project. I'm mechanically inclined, and have taken some engineering courses so I'll be able to partner with you until we get it right. If all goes well, future work can be awarded to you on a project by project basis. While timelines are fluctuating, I'd like to get the project started b...
Category: CAD       
Skills: AutoCAD, Manufacturing Design       

K****nis
 [?]
Sign in to view client's details.
| K****nis
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-3 months  |  Posted: Jun 28, 2015  |  Ends: 5d, 11h  |   4 Proposals
You will receive URL for LinkeIn search. You must connect with people, get email at their profile and push them to google sheet.
Category: Mechanical       
Skills: Research, Internet Research       

n****ets
 [?]
Sign in to view client's details.
| n****ets
|    Ukraine
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 13d, 10h  |   21 Proposals
Programming of microcontrollers as well as PCB design and software review. I am based in worcester ma.
Category: Electrical       

S****gal
 [?]
Sign in to view client's details.
| S****gal
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job