Save this Search
     

All JobsEngineering & Manufacturing

 590 results  
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Apr 19, 2014  |  Ends: 12d, 23h  |   17 Proposals
We have a PCB approximately 3.5 x 5" with two Xilinx 100QFP packages and assorted other circuitry. Two buck power converters, so power layout experience a must. We will need relatively quick turnaround, about a week to ten days max. Design will be in two phases, first the packages and placement, then when the CPLDs are finalized final netlist and routing. Prefer PADS, we use Orcad. We judge a layout designer by how carefully they check their work, and often by their ability to find errors in ours. A double standard sure, but that's what works for us... We require a NOT TO EXCEED bid and hourly rate, we will pay for hours expended in design, but NTE the bid.
Category: CAD       
Skills: 3D Modeling, AutoCAD, OrCAD, PCB Design       

b****ket
 [?]
Sign in to view client's details.
| b****ket
|    United States
Fixed Price: Not Sure   |  Posted: Apr 19, 2014  |  Ends: 12d, 23h  |   3 Proposals
I need help to modify the remote controller device of 'made in China' off-the-shelf multi color LED light bulb ? (i.e. mood light you can buy on Amazon) to perform a specialized function
Category: Electrical       
Skills: Electronic Design       

b****son
 [?]
Sign in to view client's details.
| b****son *
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-3 months  |  Posted: Apr 19, 2014  |  Ends: 87d, 23h  |   4 Proposals
Looking to outsource some design work to someone who is familiar with the Chief Architect software. Must have Chief Architect X6 or Premier.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

f****r25
 [?]
Sign in to view client's details.
| f****r25 *
|    United States
Fixed Price: Not Sure   |  Posted: Apr 19, 2014  |  Ends: 12d, 23h  |   0 Proposals
My company is looking for licensed individuals or company that can install indoor and outdoor cameras in residental areas. We are located in New Jersey but if you're willing to travel please send a proposal. US only please apply.
Category: Electrical       

n****z87
 [?]
Sign in to view client's details.
| n****z87
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 19, 2014  |  Ends: 12d, 22h  |   2 Proposals
Hi, I am looking for someone to design a Downconverter/ Upconverter for Xlinx FPGAS. The design parameters are the following: Data rate: 200 kbps Modulation type: QPSK FPGA system sampling rate: 150 Mhz IF carrier frequency: 12.8 Mhz Oscillator type: Cordic Adjacent channel rejection: -40dBs I can pay up to 700 euros but the amount is discussable. Many parts of the system (e.g filters, QPSK) and an instruction book are available here:   [obscured]  /u/9537436/EE580_980_DSP_Primer_Notes.zip. Any implementation can be used as long as it works. The total amount spent in the project for an experienced designer should be no more than 30 hours. The delivered product should include the final model (Simulink and MATLAB files) and a technical report. Your design files must be organised in such a way that they can be easily opened and run, e.g. you should clarify the necessary directory structure and include a "readme" file as appropriate. The technical report is expected to ...
Category: Electrical       
Skills: Electronics, Embedded System       

p****ake
 [?]
Sign in to view client's details.
| p****ake
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: Apr 19, 2014  |  Ends: 12d, 22h  |   1 Proposal
Hi, I am looking for someone to design a Downconverter/ Upconverter for Xlinx FPGAS. The design parameters are the following: Data rate: 200 kbps Modulation type: QPSK FPGA system sampling rate: 150 Mhz IF carrier frequency: 12.8 Mhz Oscillator type: Cordic Adjacent channel rejection: -40dBs I can pay up to 700 euros but the amount is discussable. Many parts of the system (e.g filters, QPSK) and an instruction book are available here:   [obscured]  /u/9537436/EE580_980_DSP_Primer_Notes.zip. Any implementation can be used as long as it works. The total amount spent in the project for an experienced designer should be no more than 30 hours. The delivered product should include the final model (Simulink and MATLAB files) and a technical report. Your design files must be organised in such a way that they can be easily opened and run, e.g. you should clarify the necessary directory structure and include a "readme" file as appropriate. The technical report is expected to...
Category: Electrical       
Skills: Electronics, Embedded System       

p****ake
 [?]
Sign in to view client's details.
| p****ake
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Apr 19, 2014  |  Ends: 12d, 22h  |   9 Proposals
Summary: I need a pcb design for a small, light-weight, microprocessor-controlled, and easy to assemble transmitter to attach to small animals. Requirements ? Transmission should be in the band between 150.8 and 151.8 MHz. Each unit should have a different band separated by at least 10kHz (i.e. one transmitter might have a band of 150.890 and another 150.880). ? Weight less than 15 grams (ideally). The entire unit should be less than 1cm by 1cm. ? Range should be approximately 1Km ? Battery life should be a minimum of 3 months ? Pulse rate of approximately 1 pulse/second ? On-off controlled by tiny reed switch (magnetic) The units should be designed so that they can be easily constructed (using a tiny pcb as a base). There should be a set of 2 wire leads that would lead out to a small battery. A second lead should be for a wire whip-style antenna. I realize that there are commercial versions of this product available. I am looking for something that students can build on their own...
Category: Electrical       

s****hws
 [?]
Sign in to view client's details.
| s****hws
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 19, 2014  |  Ends: 12d, 20h  |   4 Proposals
. Objective: To design a studio in CKD than can be assembled on site with ease. Ref. competitive designs for ideas please refer   [obscured]   ,  [obscured]   ,  [obscured]   . The Product should be light weight, in an elegant design with the ability for a handy man , DIY person to install with basic tools. Technical Info: We require engineering designs to be fabricated through a consultative process,. The studio is to be constructed using Alu extrusion 1.6 mm profiles similar to what is used in the Aluminum door and window manufacture. The panels to be used are to be SIPS ( Structurally insulated panels ) with an Aluminum Foam sandwich composite. The product is to be pre-finished, with no painting required. You may suggest an alternative material that is pre-finished (if it is painted and weatherproof ) The roof is to be made of a similar material SIPS ( structurally insulated panels ) with capping that is easy to assemble. A gradient of 3 degrees is required for the r...
Category: Civil & Structural       

f****fas
 [?]
Sign in to view client's details.
| f****fas
|    Australia
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 19, 2014  |  Ends: 12d, 18h  |   7 Proposals
designing 3d modelling 3dsmax autodesk revit autocad sketchup pro rendering sketching urban designing
Category: Architecture       

a****ang
 [?]
Sign in to view client's details.
| a****ang
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 19, 2014  |  Ends: 12d, 17h  |   2 Proposals
I have done 3D designing & modelling of the heavily reinforced and complex designed floors of Pakistan's highest sky-scraper Bahria Town Icon, located in Karachi, with the association of AAA Partnership Pvt. Ltd who are the official project managers on this project. The 3D modelling and designing of the building structural elements was carried out on AutoCAD (2014) and REVIT (2014) through which the construction quality of the building was improved in the pre-construction phase based on the concept of Building Information Modeling (BIM) and through this the key parameters of Quality Management was achieved
Category: Civil & Structural       

t****a17
 [?]
Sign in to view client's details.
| t****a17
|    United Arab Emirates
Fixed Price: Not Sure   |  Posted: Apr 19, 2014  |  Ends: 12d, 17h  |   23 Proposals
We are a new company promoting our baby product brand with two new products to launch, both fully patented and award winning concepts. We need a talented and reliable CAD person to provide CAD to our manufacturer. This would be a great opportunity for the right person
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: Western Europe

c****wuk
 [?]
Sign in to view client's details.
| c****wuk
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 19, 2014  |  Ends: 12d, 13h  |   6 Proposals
RE-BID: PROVIDING 20 PROTOTYPES IS NOW OPTIONAL. I'm looking for a person with a degree in Industrial Design (ID) to work on a FIXED BID project to design one of my consumer products. The FIXED BID shall lists the specific deliverables covered in the bid and include Elance charges. The ID must have expertise in product design, manufacturing, ergonomics, usability, aesthetics, surfacing, and engineering. The consumer product is a hair plug. The hair plug has two major components: ? Component 1 - a flexible polymer-encased knotted-hair fabric mesh with all hairs protruding only from one side of the mesh (an exception to this requirement is explained below) leaving the other side of the mesh bare. ? Component 2 - an adhesive patch bonded to one side of a flexible polypropylene substrate leaving the other side of the substrate bare. I'll use two approaches to manufacture the hair plug. The first approach places the responsibility on one manufacturer to produce the complete hair plug....
Category: Product Design       

P****bat
 [?]
Sign in to view client's details.
| P****bat
|    United States
Fixed Price: $100 or less   |  Posted: Apr 19, 2014  |  Ends: 27d, 13h  |   5 Proposals
Create the Robot Structural Analysis file using the attached plans. It's a 7-storey, small RC old building in Imperial Units, i.e. ft, kip (1000 lb-f), etc. For elastic analysis only, and therefore no rebar details are necessary for input. Required inputs: (1) physical dimensions of Column, beam, slab, wall, staircase, water tank (2) Live load, dead load and wind load Must be completed in 7 days. Immediate one-off payment AFTER completion of job.
Category: Civil & Structural       

m****ung
 [?]
Sign in to view client's details.
| m****ung
|    Hong Kong SAR, PRC
Fixed Price: More than $10,000   |  Posted: Apr 19, 2014  |  Ends: 23d, 10h  |   7 Proposals
I need an iPhone app designed and developed to connect to my web server via APIs. I have the web servers all built and I now need an iPhone app to call my APIs. I need someone who can build a high quality iPhone app.
Category: Product Design       

i****nee
 [?]
Sign in to view client's details.
| i****nee
|    United States
Fixed Price: $50 - $80   |  Posted: Apr 18, 2014  |  Ends: 12d, 10h  |   0 Proposals
I'm looking for someone who is knowledgeable of the REScheck Software Version 4.4.4 I need to generate a Envelope Assemblies table showing Gross Area, Cavity R-Value, Cont. R-Value, Glazing or Door U-Factor, UA. This should be a simple job if you know anything about Rescheck
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

t****013
 [?]
Sign in to view client's details.
| t****013
|    United States
Fixed Price: Less than $500   |  Posted: Apr 18, 2014  |  Ends: 12d, 10h  |   53 Proposals
I have 33 architectural details that are all JPG format and I need them drafted into standard Autocad format. They should have good line weights. Some are at 3" scale, some are at 1.5" scale. Name of detail can be name of JPG file. the details that are single module would want to fit into a print sheet space that is 6.25" wide by 4.75" high. What is pricing for this and how do I get you the JPG files? Need in ACAD .dwg format. I can post the zip file with the 33 JPGs if you have interest.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

b****ect
 [?]
Sign in to view client's details.
| b****ect
|    United States
Fixed Price: Less than $500   |  Posted: Apr 18, 2014  |  Ends: 9h, 44m  |   2 Proposals
Need a local architect to make plans for a pharmacy to submit to city of Huntington Beach. Small retail space, less than 1200sft, need plans according to local code for hassle free approval.
Category: Architecture       
Skills: Architecture, AutoCAD, Interior Design       
Preferred Location: United States

i****r99
 [?]
Sign in to view client's details.
| i****r99
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Apr 18, 2014  |  Ends: 12d, 7h  |   30 Proposals
Hello, I have already built house, it's part of 4 floors building. The apartment area is almost 280 square meters. What's requested is complete design includes the following: - Furniture, includes Kitchen, Bedrooms, bathrooms, dinning room, living room, saloons, and corridors, etc... - Floor. - Wall color design. - Gypsum ceiling includes the light. - Doors color, which should be advised by me. I will provide the 2D map of house, and general vision of what's needed. Successful delivery should include: - All measurements in metric needed to deploy the design. - All color codes for design. - complete 3D source files. Many thanks indeed -Omar
Category: Architecture       
Skills: 3ds Max, 3D Modeling, Architecture, AutoCAD, 3D Design       

o****aas
 [?]
Sign in to view client's details.
| o****aas
Fixed Price: Less than $500   |  Posted: Apr 18, 2014  |  Ends: 12d, 6h  |   9 Proposals
I have a small part designed that I would like to have a mold made. The part is slightly larger than 1 cubic inch. The mold can be made out of aluminum to save cost. It should be a simple 2 part mold, The 3D CAD file is complete, draft has already been factored in. I will be injecting the mold with a homemade machine I created. Summary - I need CNC machine services and someone with experience in mold machining to make an inexpensive yet perfectly functional mold.
Category: Other - Engineering &...       
Skills: CNC machining       

c****tis
 [?]
Sign in to view client's details.
| c****tis
|    United States
Fixed Price: More than $10,000   |  Posted: Apr 18, 2014  |  Ends: 23d, 4h  |   4 Proposals
Our company is a startup in the wearable technology space. While we cannot say much about our product, we need someone to help organize our management of components, and think through our options for logistics. The size of the product and dimensions of the packaging lend themselves to people with supply chain /mfg ops experiences in watches, jewelry, footwear, consumer electronics, mobile phones and fine foods. If you want to better understand the future of wearables, and want to work with vibrant, innovative environment, this opportunity might work for you. The team is a mix of experience and bold experimentation, located in San Francisco. PLEASE READ: You must be in the Bay Area to execute the tasks effectively.
Category: Contract Manufacturing       
Preferred Location: United States

O****eep
 [?]
Sign in to view client's details.
| O****eep
|    United States
Fixed Price: $20 - $400   |  Posted: Apr 18, 2014  |  Ends: 12d, 5h  |   3 Proposals
Project Description: Hello. I've learned it's possible to 3D print a trumpet. It's hard, but it's possible. I want a 3D printed "MF Firebird" Trumpet. This is a trumpet with an added trombone slide. Here's the Challenge: I need it to PLAY. This means printing out multiple parts: The Slide, 3 Valves, and the Body; five parts total. It could also be easier to split the body or the slide into multiple "sub parts" There are several things that make a trumpet playable. If we could talk on Skype I'd be happy to tell you them. I can show anyone interested in printing a trumpet examples of valveless 3D printed "natural trumpets". For more details talk to me on here, and if I think your price is ok then I'll add you on Skype. Thank you. ALSO: this was originally posted on Freelancer.com, but I wanted to have more options when choosing someone, so I came here.
Category: 3D Modelling       

O****321
 [?]
Sign in to view client's details.
| O****321
|    United States
Fixed Price: Not Sure   |  Posted: Apr 18, 2014  |  Ends: 5h, 37m  |   4 Proposals
Input 16 bit digital word, updated no more often then once per us. NON-ISOLATED OUTPUT Impedance: 50 ohm Amplitude 20 Vpp into 500 or greater ohm load, 20 mA 1mV step size maximum Short Circuit protected Resolution 1mV steps up to pulse amplitudes <= +/- 2000mV p-p 10mV steps for pulse amplitudes > +/- 2000mV p-p Amplitude Accuracy (Error) 0.1% + 0.1 mV of setting in ambient of 5 deg C Slew Rate 20V / us Rise /Fall time (square waves) <100nS Offset Range 0 to +/- 10V Offset Accuracy (Error) 2% +0.2mV of setting Noise <1mVrms 10Hz to 100kHz or better ISOLATED OUTPUT Type Output isolated from ground by transformer or optical components Rating 1500Vrms, >100MegOhms, Better than 50pF @ 100Hz Output converted to constant current if requested: 200Vp-p maximum 1V/V 10V/V 100V/V 100mA maximum 1uA/V 10uA/V 100uA/V 1mA/V 10mA/V Sufficient power (40W
Category: Electrical       

I****eth
 [?]
Sign in to view client's details.
| I****eth
|    United States
Fixed Price: Not Sure   |  Posted: Apr 18, 2014  |  Ends: 12d, 5h  |   10 Proposals
We would like to design and manufacture a diesel monitor for marine diesel engines. The unit should monitor the amount of fuel been used. With a display the unit would show litres per hour used and total consumption. We also like to include the possabilty to be able to email results to an address. Also if we could incorporate live monitoring also?. The unit needs to be cost effective for small boats to buy. There is already plenty of expensive models on the market.
Category: Product Design       

t****sky
 [?]
Sign in to view client's details.
| t****sky
|    Ireland
Fixed Price: Less than $500   |  Posted: Apr 18, 2014  |  Ends: 12d, 4h  |   9 Proposals
I am in need of an inexpensive molding and manufacturing run of a simple item. The item measures @ 6.5 inch x 3 inch. I have attached an image that illustrates that the item is NOT solid plastic, but has open areas within these measurements. (The item resembles the letter "T" with a short leg. The leg has to be of a bendable plastic that could bend back to the Top of the "T". The center of the top of the "T" can be a rigid plastic). (2 separate plastic pieces glued together). I have an already existing Solidworks 3D file that will be sent to the winning bid for review and molding. All plastics types can be considered if they pass US import requirements for products. I have already been given initial mold pricing of ($600.00) from another company and am looking to beat that price. Assembled item pricing bid is currently at .15 cents per item. (Quantities are 5K+) If you can beat these prices by at least 20%, then please make a bid and send samples of ...
Category: Other - Engineering &...       

T****ury
 [?]
Sign in to view client's details.
| T****ury
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job