Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: Apr 17, 2014  |  Ends: 12d, 0h  |   3 Proposals
We need a project for a DVR The specifications can be discussed, but are mainly this: - Linux 3.0 or higher - 4 video input - 4 audio channel - 1 HDMI - SATA - 485 PORT - Resolution: 4D1@30fps - 30fps per camera - 120fps - Video recording - FTP server to access the videos - Possibility to save the video on the HD SATA or SD Card. Possibility to configure the output video resolution. - Possibility to connect a WIFI or 3G dongle through USB. - 2 USB ports - GPI/O - Ethernet
Category: Electrical       

s****asa
 [?]
Sign in to view client's details.
| s****asa
|    Brazil
Fixed Price: Not Sure   |  Posted: Apr 17, 2014  |  Ends: 26d, 22h  |   4 Proposals
I need someone to connect a transformer and a thermostat for a heating pad. To make sure it works and is safe. I'm asking for someone to put together a new heating pad that I've designed and patented.
Category: Electrical       

P****PAD
 [?]
Sign in to view client's details.
| P****PAD
|    United States
Fixed Price: Not Sure   |  Posted: Apr 17, 2014  |  Ends: 11d, 18h  |   22 Proposals
I have various structural design projects that need to be drafted. I send markups to you for drafting. These are residential and light commercial.building repair and alterations If you can layout beams, columns, foundations and shear walls that is helpful and will save me time. If you have a catalog of standard details for wood, concrete, steel, masonry, cold formed steel structures that will also be helpful. I will share what I have available. You deliverable will be compatible with RVT or DWG formats if I need to make changes, but the final will be in PDF format for plotting and distribution to clients.
Category: CAD       
Skills: AutoCAD, English Spelling, AutoDesk Revit       
Preferred Location: North America

X****311
 [?]
Sign in to view client's details.
| X****311
|    United States
Fixed Price: $30 - $250   |  Posted: Apr 17, 2014  |  Ends: 11d, 17h  |   2 Proposals
Hello, I have a project i have been working on I am building a wireless power transfer system that should work as far as 10 feet and should power multiple devise like laptop and cell phone at the same time. I have build a smaller model of this but i need help building a larger one the. at the end of this project i will need you to also build it physical and ship it to me i will pay for the cost of shipping and the parts needed for this the cost of building this should not be more then $50 USD the wireless devices should work in all 4 directions not just one directions. please let me know the cost of this project and how long it will take to do it. this is the Schematic   [obscured]  /img/bezdratovy-prenos-energie/wet.gif references i used to build my device   [obscured]  /bezdratovy-prenos-energie.php   [obscured]  /watch?v=r1UT4NuygmQ   [obscured]  /pages/intellectual-property.html   [obscured]  /stuff/41/wec.shtml#description(ID: 5576281...
Category: Electrical       

A****d12
 [?]
Sign in to view client's details.
| A****d12 *
|    Pakistan
Fixed Price: Not Sure   |  Posted: Apr 17, 2014  |  Ends: 26d, 15h  |   2 Proposals
We're now looking for Japanese to English translators to work in a project about electronics & mechanics. The volume is about 500K char. Trados required. This is a long-term project and will start immediately, so we will appreciate your early reply and participation. However, if you are not available right now, you can still apply for the job, but you will be given fewer characters to translate. The job is open only to freelance working anywhere around the world. To know more about the subject, please refer to the sample text below. If you're interested in this job, please e-mail your CV with picture along with the following information to   [obscured]  .tw with the subject line: To Jeremy Jap>Eng_ProZ: your name - Name: - Best Rate Per Japanese Character(USD): - Daily Output: - Native Language: - When can you start this project ( Please note that if you are not available right now, you can still apply for this job, but you will be given fewer characters to...
Category: Electrical       

s****iao
 [?]
Sign in to view client's details.
| s****iao
|    Taiwan
Fixed Price: About $30   |  Posted: Apr 17, 2014  |  Ends: 11d, 14h  |   14 Proposals
Hi, I am looking for an architect who is expert in Archicad 17, to create a roof of a building as its images. Drawing the building is completed entirely and only its roof is remaining. Please find the attached images for more clarification. Sara
Category: CAD       
Skills: ArchiCAD       

s****e13
 [?]
Sign in to view client's details.
| s****e13
|    United States
Fixed Price: $20 - $50   |  Posted: Apr 16, 2014  |  Ends: 3d, 8h  |   15 Proposals
Hello again. I need some fix ups done on the drawing you did for me a little while back. I noticed a couple small dimension mistakes in drawings and I also need some extra work done on it. I need All drawings on 1 file so the whole layout can be seen in one pdf I need the internal folds to the doors shown I need the doors of LHS and RHS drawn separately with the folds and dimensions etc The quantity of pieces added to eash drawing 1:1 scale added I need flat profiles of eash piece Please let me know what this will cost and when you can do it. I Have put the job up as public viewing but if your price is fair I will just accept your quote. Thanks Norm 1 alteration extra done to only one of the 5 drawings
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

k****orm
 [?]
Sign in to view client's details.
| k****orm
Fixed Price: Less than $500   |  Posted: Apr 16, 2014  |  Ends: 11d, 7h  |   4 Proposals
I've got the hardware and board layout designed for a PIC30 Microcontroller for a Solid State Relay design and wanted to have a programmer add some intelligence in order to prevent false triggering in conducting the power to the load. This includes fault detection and filtering/decision making on weather the trigger input signal is truely a "on" signal or weather it was due to some sort of random noise (transients), a power system fault (loss of power/sagging power), random switching noise, a damaged/faulty component upstream, etc...
Category: Electrical       
Skills: C, C++, Adaptive Algorithms, Embedded System       

s****yka
 [?]
Sign in to view client's details.
| s****yka
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Apr 16, 2014  |  Ends: 11d, 1h  |   1 Proposal
The first project I have available is the custom design and fabrication of a bathroom vanity in a contemporary style using a variety of materials including wood. i need the right person to be able to perform all aspects of the job including design and fabrication, and to thus have the equipment to do so.
Category: Contract Manufacturing       
Preferred Location: United States

j****die
 [?]
Sign in to view client's details.
| j****die
|    United States
Fixed Price: Not Sure   |  Posted: Apr 16, 2014  |  Ends: 10d, 20h  |   2 Proposals
Project Specification 1 Project Overview An Electronic Speed Controller (ESC) for Vertical Take-off and Landing (VTOL) Unmanned Aerial Vehicles (UAVs), such as quadrotors and hexarotors. Contractor is ordering from Manufacturer to construct, based on Mystery ESC 40A design, similar ESC controller with improved functionality. ? Performance identical to Mystery 40A ESC. ? Data output through I2C bus is required, specifically RPM of motor, temperature and current. ? PID control of motor RPM is required, so the ESC drives motor at constant RPM through during whole mission. ? Mounting holes have to be added to the design, to attach the ESC to the airframe. ? High-end components are to be used. ? Custom firmware based on open source code ? ESC has to be able to receive commands through I2C bus 2 Project Details 2.1 Inputs/Outputs ? Input Data: PWM signal, commands from 40Hz to 1kHz ? Output Data: I2C bus (3,3V logic) ? Data inputs (PWM, I2C) have to be isolated from the battery ground (optoi...
Category: Electrical       

m****990
 [?]
Sign in to view client's details.
| m****990
|    Czech Republic
Fixed Price: Not Sure   |  Posted: Apr 16, 2014  |  Ends: 2d, 17h  |   6 Proposals
I have an original clock that i would like to replicate. The inside timing is controlled via a receiver signal (see picture attached). I have the diagrams and everything. It is in german and if need be i can have it translated. Your job would be to replicate the inside workings of the clock. The outside design will be different. How do I contact you to discuss the job Ein Uhrr mit Funk möchtee ich nachbauenn. Anleitung ist dabei. Wir möchten ein Prototyp bauen (also innerlich das gleiche aber anderer Design) Ich werde es Ihnen eventuell schicken. Wie kann ich Ihnen Tagsüber am besten erreichen?
Category: Electrical       
Preferred Location: Western Europe, Eastern Europe

m****ons
 [?]
Sign in to view client's details.
| m****ons
|    United States
Fixed Price: Less than $500   |  Posted: Apr 16, 2014  |  Ends: 10d, 12h  |   2 Proposals
Using two enforcers (with reflectors) I have a prototype already made. The board inputs a signal from the two enforcers and outputs either a 1, 2 or 2,1 (depends on the direction of crossing the beams). I'd like to document and create a PCB sketch from it to eventually order multiple units of it.
Category: Electrical       
Preferred Location: Canada

r****olo
 [?]
Sign in to view client's details.
| r****olo
|    Canada
Fixed Price: Not Sure   |  Posted: Apr 15, 2014  |  Ends: 10d, 10h  |   11 Proposals
Want to have the bar risers and clamps machined from pages 1,2, and 4 of the attached pdf. Your bid must be a final bid..meaning you need to figure the cost of materials, labor, machine time, and shipping. I want a final value only, that way I am comparing bids as "apples for apples." Please provide a price for 5 sets of clamps with the "one-piece" bar clamp top mount (page 1-2), and 5 sets of clamps with the two piece style bar clamps (page 4). ***EDIT: I already have the parts modeled in Solidworks, Creo, and AutoCad. For shipping I am in Pennsylvania, 17202. Thank you
Category: Contract Manufacturing       

S****vel
 [?]
Sign in to view client's details.
| S****vel
|    United States
Fixed Price: Not Sure   |  Posted: Apr 15, 2014  |  Ends: 10d, 7h  |   8 Proposals
I need a breadboard circuit with the final schematic and the right values and BOM. We need an AM detector which has 120kHz at 2Vpp and is modulated with 32kHz, 10mV. The demodulation sub-circuit has a diode and an RC which has to match. Due to small Signal to Carrier ratio, we will get a huge ripple which needs to be filtered out. The 32kHz comes with 8 periods per bit and has to create an output level of 100mV.
Category: Electrical       

l****deh
 [?]
Sign in to view client's details.
| l****deh
|    United States
Fixed Price: More than $10,000   |  Posted: Apr 15, 2014  |  Ends: 10d, 1h  |   2 Proposals
Cogeneration projects for the industrial sector as for commercial and residential sector renewable energy thermodynamics work in south america (Colombia) Engineering firm from Colombia
Category: Electrical       

t****rol
 [?]
Sign in to view client's details.
| t****rol
|    Colombia
Fixed Price: Not Sure   |  Posted: Apr 15, 2014  |  Ends: 9d, 20h  |   5 Proposals
I am building a home automation system based on Wi-Fi. I need someone to design the Wi-Fi connector to plug standard speakers into to make them "wireless." I also need this person to reverse engineer a video and audio interface already on the market to fit our needs. I am working on a very short timeline so please be expected to have a product within 2 weeks. Thanks
Category: Electrical       

h****282
 [?]
Sign in to view client's details.
| h****282
|    United States
Fixed Price: Less than $500   |  Posted: Apr 15, 2014  |  Ends: 9d, 19h  |   6 Proposals
Major Activities: 1. Design a console housing for a treadmil 2. Use shape analysis tools to assess the curves and surfaces 3. Generate a mould tool cavity 4. Generate CNC manufacturing data 5. Verify the CNC manufacturing data 6. Data Transfer and Metadata Management Techniques 7. Design Illustration (appropriate illustration methods for the final report on 1 to 6)
Category: CAD       
Skills: 3D Modeling, 3D Design, Unigraphics NX       

a****i92
 [?]
Sign in to view client's details.
| a****i92
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Apr 15, 2014  |  Ends: 9d, 15h  |   62 Proposals
I have a low resolution raster graphic of a 2D line drawing (attached) of a fan motor. I need an AutoCAD drawing of the low resolution raster graphic. Include dimensioning lines, dimensions and callouts all as shown in the graphic.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Pro-E       

b****ger
 [?]
Sign in to view client's details.
| b****ger
|    United States
Fixed Price: $500 - $2,500   |  Posted: Apr 14, 2014  |  Ends: 24d, 10h  |   14 Proposals
The project is to create a prototype for a wireless transmitter/receiver that works with Bluetooth Smart (low energy) and radio frequency signals. The device will need to receive instructions from a cell phone based app, and subsequently transmit a radio signal. It will also have to relay information regarding it's battery life to the cell phone based app. The Bluetooth signal must have high security. Ultimately, a reproducible design is needed for the design to be manufactured in production quantities.
Category: Electrical       

W****vid
 [?]
Sign in to view client's details.
| W****vid
|    United States
Fixed Price: Less than $500   |  Posted: Apr 14, 2014  |  Ends: 9d, 7h  |   2 Proposals
Hello, I would like someone to design a Dual Polarized Feeder (5GHz), starting from 5000 MHz ~ 6000 MHz using HFSS program including VSWR , Isolation between 2 ports , reflected power , gain , return loss details... I will be using this feeder on dishes sized between 60cm - 180cm offset. I want isolation between the 2 ports to be : > 45 dB VSWR between 1.0 ~ 1.5 dB MAX. I would like you to draw similar to the link file (data.freelancer.com/project/5805458/drw1.jpg) , but with dual connectors matching 5 GHz ~ 6 GHz bands. I'm really looking for real designers and I cant pay more than 200$ , but I would highly appreciate if i get bids less than 200$.
Category: Electrical       

g****bli
 [?]
Sign in to view client's details.
| g****bli
|    Lebanon
Fixed Price: Less than $500   |  Posted: Apr 14, 2014  |  Ends: 9d, 5h  |   13 Proposals
I have some sketches of a bracelet concept that need to be converted to a rhino file. The file only needs to include the features included on the sketches. This includes the basic shape of the bracelet and the texture mapping of a "hammered" look that is common in jewelry. The goal is to be able to 3D print this part and prepare it for either lost wax casting or metal stamping. The final deliverable of this project will be a Rhino file including all the details in the attached sketches (engraving and texture).
Category: CAD       
Skills: 3D Modeling, AutoCAD, Rhinoceros 3D, 3D Design       

G****f25
 [?]
Sign in to view client's details.
| G****f25
|    United States
Fixed Price: Not Sure   |  Posted: Apr 14, 2014  |  Ends: 8d, 22h  |   24 Proposals
I require someone working full time to create hundreds of CAD designs. The designs are require to create website images and animated flash 3D. The work can either be paid per design or a salary based over several weeks or months. Please provide examples of previous work and average charge per design.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

a****icd
 [?]
Sign in to view client's details.
| a****icd
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Apr 14, 2014  |  Ends: 8d, 20h  |   11 Proposals
Hello, I need to manufacture this prototype for more later I have to manufacture in mass. Looking forward to hearing from you. Best regards.
Category: Electrical       

N****ION
 [?]
Sign in to view client's details.
| N****ION
|    Ireland
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job