Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 38 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
Implementing semi variogram in matlab in simple version.I have a code but it is first calculating distances and then variogram taking distances.But now I need the code which calculates both of them together.like first it takes distance 1 and then claculate variogram and store and then for distance 2 andso on.
Category: Electrical       

y****233
 [?]
Sign in to view client's details.
| y****233
|    India
Fixed Price: Less than $500   |  Posted: 1h, 12m ago  |  Ends: 14d, 22h  |   0 Proposals
So the other freelancer I hired has disappeared, and had orginally agreed to design the electrical components for the unit at 200, and I would like to stay in that range. I do need a really fast turn around on this design. 11pin micro usb charging, hdmi audio output, rca out puts, bluetooth integration, and the 3d design is already done. Please help me out. Thanks.
Category: Electrical       

k****ted
 [?]
Sign in to view client's details.
| k****ted
|    United States
Fixed Price: $600 - $800   |  Posted: 1h, 23m ago  |  Ends: 1d, 22h  |   0 Proposals
I need an experienced architect or house designer with good knowledge of CAD to complete a set of house plans that I have started. I already have the following in CAD files which are nearly complete and I can provide you with the files: Site Plan Foundation Plan Roof Plans Floor Plans Elevations I'm looking for a US based architect or designer who is knowledgeable with IRC and IBC and who can provide relevant codes on the the plans and who can put together a complete set of plans that is ready to submit for a permit. Since a lot of the work has already been completed, I'm looking to complete this job within 7-10 days at the most. You should be available online daily for communication and to answer questions. I do not work with any kind of upfront payment so if that is your requirement, this job is not for you.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

t****079
 [?]
Sign in to view client's details.
| t****079
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 32m ago  |  Ends: 2d, 21h  |   1 Proposal
RFQ for Quantity Takeoff of: 28 Unit Townhouse complex multiple buildings, approximately 5 unit types Foundation Walls Chimneys Exterior Walls, Vinyl Siding Exterior Walls, Brick Siding Exterior, Window Assemblies Exterior Doors Exterior - Patio Doors, Sliding Garage Doors (Twnhse) Pitched, Asphalt Shingle Eavestroughs and Downspouts Fascia Board Flashing (Siding, Windows, Eaves) Caulking and Weatherstripping Exterior Painting Lobby Redecoration Electrical Services and Distribution Exterior Lighting Fencing - Wood Patios and Walkways - Concrete Pavement Asphalt Hard Landscaping Soft Landscaping Perimeter Drains Services and UG Piping Quantity takeoffs from drawings: Scale drawings, please provide scaled baseline on output Provide quantities and some method of verifying accuracy of takeoffs Provide descriptions of each component in as much detail as allowed by available info A sample description would be as follows: Perimeter Fencing The fencing consists of solid cedar planks, 2....
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

d****853
 [?]
Sign in to view client's details.
| d****853
|    Canada
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 3h, 2m ago  |  Ends: 14d, 20h  |   2 Proposals
I am creating a ring like device and need to determine the correct electrical components (size, type, and power requirements). I am looking for someone who can identify the correct components and create a workable model that I can put into a wearable technology gadget.
Category: Electrical       

o****n01
 [?]
Sign in to view client's details.
| o****n01
|    United States
Fixed Price: Less than $500   |  Posted: 4h, 51m ago  |  Ends: 14d, 19h  |   0 Proposals
Hi; I am looking for a machinist(cutting metal machine), to send me a real cutaway safety valve. He needs to find a "pressure safety valve"(PSV), cut it in a way to show internals and paint the cut areas and ship it to me. The PSV can be bought from industrial junk sellers, it means it doesn't need to be "operational",but its appearance should be good. The residential PSV(on water heaters) is not acceptable. I prefer North american and European bidders. The payment will be stage-wise, first one after getting the PSV(with a picture which shows it is in your custody), after cutting, after painting, After shipping, and after receiving. You can find what I am looking for by googling: safety valve cutaway Thanks
Category: Contract Manufacturing       
Preferred Location: United States

E****ner
 [?]
Sign in to view client's details.
| E****ner
|    Canada
Hourly Rate: $40 - $50 / hr   |  Duration: 4-6 months  |  Posted: 6h, 44m ago  |  Ends: 14d, 17h  |   3 Proposals
Hi I am looking a consultant, who can provide quick guidance or answering doubts in RF & microwave & PLL field. it should not really take up your time if you work in this field. Mainly it is for guidance.
Category: Electrical       

j****mes
 [?]
Sign in to view client's details.
| j****mes
|    United States
Fixed Price: $90 - $140   |  Posted: 7h, 9m ago  |  Ends: 2d, 16h  |   0 Proposals
I'm in need of a CAD designer or anyone with experience who can provide a gas piping and electrical plans with load calculations (USA). I will provide Floor plans in CAD
Category: Electrical       
Skills: AutoCAD, Electrical Engineering, Electronics       

t****079
 [?]
Sign in to view client's details.
| t****079
|    United States
Hourly Rate: $20 - $50 / hr   |  Duration: 1-2 weeks  |  Posted: 8h, 9m ago  |  Ends: 29d, 15h  |   9 Proposals
K6 is a specialist Industrial Design consultancy and we are looking to add to the sub-contractors we work with. Presently we need additional support in electronic design and manufacture which is quite a broad heading. An example of a typical project might be an embedded system, connected to the outside world via a 3G modem (module designed onto a custom pcb), a number of IO lines running bespoke software. These solutions form part of complete products that we design and then manufacture in small volumes. If you would like to work with us, let us know and we will send you a brief for our next project. Please ignore the payment range - I had to enter something!
Category: Electrical       
Preferred Location: United Kingdom

g****k70
 [?]
Sign in to view client's details.
| g****k70
|    United Kingdom
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 8h, 14m ago  |  Ends: 14d, 15h  |   14 Proposals
We have a small product line and have simple CAD drawings for most of the products we carry online. We need a couple of CAD drawings completed and would like to work with someone in the United States, so we can easily ship product samples that needs to be used in the drawings. It's a small job initially, but we may want to redo some of our older drawings after the initial project. We will supply the actual product, as well as drawings of the other products to get a feel for what we're looking for.
Category: CAD       
Skills: AutoCAD, CAD/AutoCAD       
Preferred Location: United States

O****Hog
 [?]
Sign in to view client's details.
| O****Hog
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 49m ago  |  Ends: 14d, 15h  |   15 Proposals
Interior design and decoration for a 235 sqm apartment with a 90sqm terrace space. I have attached a an autocad file copy of the drawings. Please provide the costs for a 3D drawing and interior design offer.
Category: Interior Design       
Skills: 3D Modeling, Architecture, Interior Design       

l****duh
 [?]
Sign in to view client's details.
| l****duh
|    Qatar
Fixed Price: Not Sure   |  Posted: 9h, 41m ago  |  Ends: 14d, 14h  |   13 Proposals
we need new ideas for phone case designs must be able to use 3d cad software and creative we need motivated individuals who can work without supervision and creative persons we need phone covers for iphone 2,3,4,5 and samsung 2,3,4,5 htc one , and some other phones please send some ideas to be considered if we like the design we will ask you to draw full detail and create a template to send over to our factory in china some of our competitors has products listed at the bottom of the page   [obscured]  /Spigen%C2%AE-CUSHION-Samsung-Shimmery-Protective/dp/B00I3UWGJW/ref=pd_sim_cps_6?ie=UTF8&refRID=0SJB6XC4218GM8E4WC2R
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

s****vin
 [?]
Sign in to view client's details.
| s****vin
|    United States
Fixed Price: Not Sure   |  Posted: 10h, 4m ago  |  Ends: 29d, 13h  |   1 Proposal
Requirements Programming a z-wave end device. This individual must have prior experience in the design of a z-wave product or proven knowledge to be able to finish the project. Benefits To already have the Sigma Dev kit and the NDA already signed To have Keil software The main help will be needed on the software side of this project; we can develop the hardware side.
Category: Electrical       
Skills: C, Electronics, Product Design, Keil PK51, z-wave       

N****lte
 [?]
Sign in to view client's details.
| N****lte
|    Canada
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: 10h, 15m ago  |  Ends: 14d, 13h  |   8 Proposals
The project is a devices stand for phones and tablets. It has some unique characteristics that need engineering.
Category: CAD       
Skills: SolidWorks, 3D Printing, 3D Design       
Preferred Location: United States

j****sey
 [?]
Sign in to view client's details.
| j****sey
|    United States
Fixed Price: Less than $500   |  Posted: 12h, 18m ago  |  Ends: 14d, 11h  |   1 Proposal
I have designed a range of cleaning gloves, I now need a manufacturer to manufacture a prototype for each glove. The glove is comprised of fabric materials as well as latex/rubber or nitrile. The process includes liquid dipping. The manufacturer must also be in the position to mass produce these gloves. The manufacture must also agree to be in the position to agree in writing to manufacture the gloves exclusively for my business. The manufacturer must already be in the business of manufacturing cleaning gloves. The manufacturer must already be manufacturing high quality packaged products that are currently sold to the consumer retail market. The cost must include the manufacture of 4 different prototype samples. All interested parties to sign the NDA attached and return together with an attached portfolio of your business as well as the products you manufacture.
Category: Contract Manufacturing       
Skills: Manufacturing Design, Manufacturing       

T****idy
 [?]
Sign in to view client's details.
| T****idy
|    South Africa
Fixed Price: Not Sure   |  Posted: 12h, 57m ago  |  Ends: 14d, 11h  |   1 Proposal
The circuit is made on proteus and coding is done on MIKRO C software the microchip used is PIC 18f46k20 now I need to make the hardware built and I need personal help meaning we sit together and build the circuit you must be in LEEDS and have good experience in this further details will be discussed with the selected candidate please don't apply if you area is not LEEDs Or Near Cities The time for this job is 2 days max
Category: Electrical       

A****999
 [?]
Sign in to view client's details.
| A****999
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 0m ago  |  Ends: 14d, 9h  |   6 Proposals
We want to see what talents are available on elance with regard to industrial engineering... specifically with regard to the design industrial control systems. What we would like to see are proposals from companies and people who are able to take a functional specification and a Control System design specification, and produce a design... i.e. IO list, Instrument election, Schematic drawings, P&IDs etc. We've got quite a bit of work, and would love to find some talent on Elance to join our motivated team! Lets see who's out there. Look forward to seeing the proposals.
Category: Electrical       

K****lia
 [?]
Sign in to view client's details.
| K****lia
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 7m ago  |  Ends: 14d, 9h  |   7 Proposals
We require the ongoing services of an Automation Control System Engineer. We are unsure what talent is available on Elance, but are willing to engage an Automation Engineer to assist us with our ongoing projects, and see how things go. Jobs will include (depending on the applicants abilities etc.): - Code cutting according to Functional Specifications, a Control System Design Specification, and a template structure. - Development of Control System/Electrical Documentation - etc. In your proposals, please indicate what you are able to provide regarding Automation Engineering (competency and Platform- e.g. RSLogix, Step7 etc.), your ability with technical writing (english), and finally, your hourly rate.
Category: Electrical       

K****lia
 [?]
Sign in to view client's details.
| K****lia
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 2m ago  |  Ends: 14d, 8h  |   2 Proposals
To Implement following algorithms in Matlab in order to calculate remaining useful life of Motor parts: 1) Fourier transform 2) Neural network 3) Support Vector Machine 4) Wavelet packet decomposition Hidden Markov Method 5) PCA
Category: Electrical       
Skills: MATLAB       

n****too
 [?]
Sign in to view client's details.
| n****too
|    Germany
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 7m ago  |  Ends: 14d, 8h  |   9 Proposals
Design the circuit and find the components necessary to create a device that can activate any of six wireless buzzers using Bluetooth 4.0 at the press of a button. Ideal range would be over 100 ft (30 m). The base unit will have 6 buttons on it that each correspond to a specific buzzer. When a button is pressed the first time, it's corresponding buzzer will begin to make noise. When the button is pressed a second time, the buzzer will stop sounding. Also, the buzzer will need to stop when it is pressed by the user, or after a set amount of time. The base unit can be powered either by battery or 120 Volt wall plug. Further details can be discussed upon request. Please send an estimate of how many hours this will take and your hourly wage request with any responses.
Category: Electrical       

s****ess
 [?]
Sign in to view client's details.
| s****ess
|    United States
Fixed Price: Not Sure   |  Posted: 16h, 8m ago  |  Ends: 14d, 7h  |   2 Proposals
Driving Sensor: Scope of Project 1.0 Introduction of Project: Design and build a driver sensor prototype, which is a system of multiple measuring sensors to determine a drivers height and hand position while driving 2.0 Scope of Project: The software/hardware system will allow a driver to drive normally while the system tracks the position data. Utilizing an ultrasonic measuring sensor the seat height can be determined. Utilizing multiple force sensor resistors (FSR's) the drivers hand position can be tracked. The position data will be saved on a SD card to be downloaded to a computer after the session. 3.0 Hardware Specs: Driver Seat: Height Sensor: Ultrasonic rangefinder wired to system Steering Wheel: 16 Round FSR Sensors located around a steering wheel wired to system The sensor will need to be built into a steering wheel cover (size TBD) Data Logging system: Arduino Mega or Due (Microprocessor) Data Logger Shield or USB SD card adapter for Due RTC real time counter to tim...
Category: Electrical       

C****o97
 [?]
Sign in to view client's details.
| C****o97
|    United States
Fixed Price: $500 - $1,000   |  Posted: 16h, 8m ago  |  Ends: 14d, 7h  |   9 Proposals
Dear, We are developping a project, and we search an electronic engineer for full time: You must have skill in: - Altium - Programming in C++ - Some knowledgeable in Qt is fine. - Soldered(you must be able to soldered board, and find provider for pcb) You have to be higly experienced in electronic and be autonomous. Your goal will be to make a complete design of some board, if you're not able keep away. It's a longterm cooperation, the monthly rate will be around 400-700usd, depends of experience.We could increase in the future. The payment will be done at the end of each week regards, Wavemill
Category: Electrical       

w****ill
 [?]
Sign in to view client's details.
| w****ill
|    France
Fixed Price: Not Sure   |  Posted: 17h, 29m ago  |  Ends: 14d, 6h  |   1 Proposal
We are looking to design a concept for a real-time monitoring system for a mining truck, built from market available components. Data we are looking to obtain in real-time is engine data (fuel consumption, rpm, oil temp, water temp etc.), GPS location and route tracker, truck load and other operational data. The system will need to be run off an installed wifi network at site as GSM and satellite connection can vary. We are looking for a freelance designer, preferably in Thailand, to design the system, calculate manufacturing cost and potentially build the system.
Category: Electrical       
Skills: 3GSM, Embedded System, GPS       

g****nds
 [?]
Sign in to view client's details.
| g****nds
|    Thailand
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 20h, 47m ago  |  Ends: 2d, 3h  |   20 Proposals
My circuit design business is getting more work than I can handle, so I'm looking to find another circuit designer (or maybe more than one) that can help with some of the circuit design. I need someone with experience in the following areas: Microcontroller based design Analog Circuit Design Bluetooth, USB, serial comm, etc Power supplies
Category: Electrical       

J****lEE
 [?]
Sign in to view client's details.
| J****lEE
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job