Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: 1h, 2m ago  |  Ends: 14d, 22h  |   1 Proposal
I have some mechanical engineering articles (ranging from 600 - 1700 words approx) that need editing before they can be published on a website: Guidelines for the editor: 1) Minor improvements to the structure and flow required. Removal of repetition where required. 2) English language improvement where necessary 3) Ensure the articles can be easily read and understood by the audience 4) Ensure the articles are as engaging and interesting as they can be NOTE: this is not a rewrite - just an enhacement on what we already have, which is actually pretty good but not written by an experienced English speaking writer Important requirements: > You must be a mechanical engineer > You must have good writing skills > You must be a native English speaker IMPORTANT: The finished, edited work and its copyright will be retained by us, and must not be reproduced elsewhere. Repeat work is likely for the right person
Category: Other - Engineering &...       

2****013
 [?]
Sign in to view client's details.
| 2****013
|    United Kingdom
Fixed Price: $100 - $150   |  Posted: 2h, 33m ago  |  Ends: 14d, 21h  |   0 Proposals
conduct a cfd simulation and analysis on bicycle wheels USING STAR CCM attached below. the simulation is limted to just the wheels(front and rear), the frame is just there to support the wheels. the drag and side forces should be calculated. star ccm+ 8.04.007-R8 for window 64 should be used for the project. all graphs and processes used to achieve the result should be sent. compare the results on the wheels and illustrate which wheel is the best in terms of aerodynamics. ALSO SCREEN MUNCH THE PROCESS SETTING THE PHYSICS.
Category: CAD       
Skills: SolidWorks, star ccm       

v****kii
 [?]
Sign in to view client's details.
| v****kii
|    United Kingdom
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: 4h, 14m ago  |  Ends: 89d, 19h  |   1 Proposal
I use the Autodesk software AutoCAD 2014 for architectural and building drawings. My work is accuracy and understandable anyone can interpret my drawings. I like to work honestly and on given time. All work is on my capability and my effort.
Category: CAD       
Skills: 3ds Max, AutoCAD, AutoDesk Revit       

j****try
 [?]
Sign in to view client's details.
| j****try
|    Tanzania, United Republic Of
Fixed Price: $20 - $70   |  Posted: 6h, 9m ago  |  Ends: 2d, 17h  |   1 Proposal
I need this by Wednesday so let me know if you can do it. I will pay $60 for all of it. If you can only do a certain problem, let me know which ones you can do and I will pay accordingly for it. Everything you need for the assignment is available in this folder --   [obscured]  /s/bjsm6iu6ojq4tap1f3fv All class session notes are available at --   [obscured]  /s/6zwnu0c15vbtsu6gb3gp let me know if you can do this by Tuesday... If you can do this, I will have more stuff in Machine Learning for you! :)
Category: Other - Engineering &...       

i****123
 [?]
Sign in to view client's details.
| i****123
|    United States
Fixed Price: $75 or less   |  Posted: 7h, 54m ago  |  Ends: 14d, 16h  |   5 Proposals
Looking for someone to create a basic floor plan in Revit from the attached file. Will NOT include any color renderings of interior or exterior. Just basic floor plan layout with 3 floor plan design revisions. Manoj
Category: CAD       
Skills: AutoCAD, AutoDesk Revit, floor plan design       

s****ion
 [?]
Sign in to view client's details.
| s****ion
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 8h, 50m ago  |  Ends: 14d, 15h  |   4 Proposals
Our functional board must be resized for a new enclosure. Aspects of the design, such as power supply, are to be verified and improved where necessary. Our objective is to obtain a commercially viable board suitable for our consumer product. There should be an option to allow the device to be operated remotely via a blue tooth or WiFi module.
Category: Electrical       

a****tar
 [?]
Sign in to view client's details.
| a****tar
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: 8h, 58m ago  |  Ends: 14d, 15h  |   1 Proposal
We require a senior electrical engineer to reformat a circuit board for a new enclosure. Some features of the hardware are to be upgraded.
Category: Electrical       

a****tar
 [?]
Sign in to view client's details.
| a****tar
|    Canada
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 9h, 17m ago  |  Ends: 14d, 14h  |   2 Proposals
We would like to redesign the 3d printer board we are currently using in order to customize it to our needs. We need a quick turnaround, and would prefer designs in KiCAD.
Category: Electrical       

b****abs
 [?]
Sign in to view client's details.
| b****abs
|    United States
Fixed Price: Less than $500   |  Posted: 10h, 25m ago  |  Ends: 14d, 13h  |   1 Proposal
Hello, I would like to hire someone to take a drawn schematic of a tube amp MC-100B and create a project file in Multi-Sim or similar program. The amp is fairly simple and the schematic is attached. The objective is to improve the linearity of this amplifier. There are two output transformers and 1 power transformer 8-10 caps and a few resistors and a choke on B+ rail. Looking forward to meeting someone who is skilled with tube amp simulation. I have another project like this for a smaller 4watt 832a tube amp that is available also. Please see the schematic link here:   [obscured]  /forums/attachment.php?attachmentid=100659 Thank you.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

d****oom
 [?]
Sign in to view client's details.
| d****oom
|    Canada
Hourly Rate: $10 - $25 / hr   |  Duration: 1-3 months  |  Posted: 11h, 53m ago  |  Ends: 14d, 12h  |   4 Proposals
I am looking for an embedded/firmware engineer to help me develop this product:   [obscured]  /projects/920064946/oscilloscope-watch The candidate must have a strong knowledge of the Atmel XMEGA AVR microcontroller, and develop on Atmel Studio using C. This is a battery powered device so the current consumption must be minimal, this is a critical requirement. The candidate must be able to produce efficient code and be familiar with techniques to get low power consumption. The candidate must have the following equipment: 1) A multimeter capable of reading current in the micro amp range. 2) A PDI debugger for the XMEGA microcontroller The sections of the firmware that need work are: 1) All functions related to the "Digital Watch" part: Time, Stopwatch. Calendar, Alarms, To Do lists... 2) Create at least 3 different faces: Digital, Analog, and an "Oscilloscope Face" 3) Diagnostics functions Optional items: 4) Games 5) Creating a more friendly bootloader...
Category: Other - Engineering &...       

g****ani
 [?]
Sign in to view client's details.
| g****ani
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: 12h, 11m ago  |  Ends: 6d, 11h  |   24 Proposals
We need a drafting professional to work for us on an ongoing basis. Using CAD, this person will create a bill of materials and drawings for each new order. We get 10-20 new orders a day. This will work well if you are in the Dallas/Ft. Worth area. Please write so I can explain more. <b>Approximate start date of the project after selecting a bid</b> Immediate (within 1-2 days)
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

a****ech
 [?]
Sign in to view client's details.
| a****ech
|    United States
Fixed Price: Less than $500   |  Posted: 13h, 26m ago  |  Ends: 14d, 10h  |   2 Proposals
  [obscured]  /design/1521/11 has a tutorial named "Standalone (Bare-Metal) USB Device Tutorial". Translate this project from ISE to Vivado. Familiarity with zynq preferred, this project has potential to grow as it will later be expanded upon. For this project just the conversion. Keywords: FPGA Verilog Zynq Vivado ISE Xilinx (and maybe embedded linux) For debug etc this project runs on Zedboard, please advise if you have zedboard or equivalent. Otherwise we may need to schedule for screen sharing.
Category: Electrical       

S****314
 [?]
Sign in to view client's details.
| S****314
|    United States
Fixed Price: Not Sure   |  Posted: 14h, 12m ago  |  Ends: 14d, 9h  |   14 Proposals
I am looking for an engineer or technical designer to finalize a product design to be moved to production. This product is a 2 part design consisting of dispensing machine and a product that will go inside the machine. Please note that this job is for a technical designer for a finalized print and CAD file to be sent for actual production not just for a concept artist.
Category: CAD       

J****ows
 [?]
Sign in to view client's details.
| J****ows
|    United States
Fixed Price: Not Sure   |  Posted: 14h, 58m ago  |  Ends: 14d, 9h  |   6 Proposals
A home care ear wax removal product that provides a user to both self-examine their ears for ear wax by use of the products patented self-exam otoscope features while they remove the ear wax with designed specula tips that effectively remove the ear wax from the ears. (The Cad work would include the otoscope, the modified specula tip designs, and a specula tip cleaning brush)
Category: CAD       
Skills: 3D Design       

W****ag1
 [?]
Sign in to view client's details.
| W****ag1
|    United States
Fixed Price: Less than $500   |  Posted: 15h, 37m ago  |  Ends: 14d, 8h  |   1 Proposal
PCB design t be matched to DCU114-B1 and containing communication ships for CAN, GPS and Zigbee radio's.
Category: Electrical       

P****Val
 [?]
Sign in to view client's details.
| P****Val
|    United States
Fixed Price: $50 or less   |  Posted: 20h, 37m ago  |  Ends: 14d, 3h  |   2 Proposals
This job is for someone who can write 2000 words on analysing a specific glider model which has been already designed on solidworks, where you are able to provide analysis, research, comparison with another similar glider model, calulcations and any other suggestions or ideas you may want to add to it. Graphs, pictures, detailed description, processes involved etc will be helpful. If any further questions, please ask!!
Category: CAD       
Skills: 3D Modeling, ANSYS, AutoCAD, SolidWorks, aircraft       

a****ter
 [?]
Sign in to view client's details.
| a****ter
|    United Kingdom
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 21h, 17m ago  |  Ends: 14d, 2h  |   37 Proposals
Im looking for an individual who can create updated DWG files and PDFs for security systems that we design, supply & install Some work may only be 10 minutes some maybe 3 hours. The amount of work will vary dependent on my clients needs. I would need a quick turn around once I e mailed the changes or drawings required I would hand mark a PDF file showing the changes for the DWG file to be updated with a PDF file sent with the DWG file I need a reliable person who I can contact via mail. I am based in the UK, our normal working hours are Mon - Fri 08;00 - 17;30, however, some work will need to be returned over night for the next day Thank you
Category: CAD       
Skills: AutoCAD       

p****123
 [?]
Sign in to view client's details.
| p****123
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 21h, 51m ago  |  Ends: 14d, 2h  |   6 Proposals
Hello! I need a presentation on probability theory application in Aircraft Maintenance. It's fine if you are not an expert in PowerPoint/Keynote, you may send me the notes for each slide in a word format . Here are few tips for how the presentation should be: - On first Slides, you should explain in layman terms, about probability theory. A bit of humor is appreciated here, - Upcoming slides, should talk about the application of probability theory in the aviation maintenance field which may include the probability of Component failures, inflight shutdowns, technical occurences, etc - You should be able to research and understand the mentioned area of study . I can give you some references to get started.
Category: Other - Engineering &...       

n****raf
 [?]
Sign in to view client's details.
| n****raf
|    Qatar
Fixed Price: $25 - $30   |  Posted: 23h, 32m ago  |  Ends: 14d, 0h  |   15 Proposals
solidworks modeling for simple GPS device i need solidworks format or STEP or IGES format the gps devise should have internal space 45mm length , 18mm width x 13mm thick attached is the concept design for it it should be consits of 3 parts at least top, buttom, and silver middle part my budget is 30$ happy bidding
Category: CAD       

e****yed
 [?]
Sign in to view client's details.
| e****yed
|    Egypt
Fixed Price: Not Sure   |  Posted: 23h, 59m ago  |  Ends: 14d, 0h  |   5 Proposals
The circuit is made on proteus and coding is done on MIKRO C software the microchip used is PIC 18f46k20 now I need to make the hardware and for that we need a PCB layout in Cadsoft Eagle and I want to transferee the code from Mikro c to mplab x and you need to check the schematic and make PCB on Eagle and guide me through the buying of components and hardware testing further details will be discussed with the selected candidate please don't apply if you area an outsourcer it must be you who does the job as a lot of details will be required from you and if I find that you are an outsourcer I will not continuo with you Thank you The time for this job is 2 days max 1day for pcb transfere and 1 day for code transfere
Category: Electrical       

A****999
 [?]
Sign in to view client's details.
| A****999
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Apr 20, 2014  |  Ends: 5d, 23h  |   9 Proposals
Project Name Engineering and design for automotive "latch and lock" system. Project scope / description We are a US based company developing a new pickup truck tailgate system. We have a CAD design of the new tailgate and we will provide this to you for your use on this project. Additional product information related to the product concept, prototype pictures, applications, and associated drawings will be provided when you are hired. The problem we are trying to solve for is for a "latching and locking" system that allows modular inserts to be securely inserted into the tailgate for various applications. We are looking for a mechanical engineering / industrial designer with auto industry experience and / or experience creating mechanical latching and locking systems utilizing readily available parts for inclusion in metal sub structures. Please provide your quotation for each of the 3 phases below by April 25th. Project Requirements / Key Features / Perfo...
Category: CAD       

r****ens
 [?]
Sign in to view client's details.
| r****ens
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 20, 2014  |  Ends: 13d, 15h  |   14 Proposals
I'm looking for someone to take my hand drawn electronic schematics and enter them into Eagle CAD. I'm a circuit designer and will specify all the necessary details, so I just need someone that can redraw my schematic. If by some chance you also can use a program called Diptrace that would be great. I've been using Diptrace which I find more user friendly than Eagle, but I know Eagle is the standard. If your proposal looks good then I will contact you and send you a sample schematic so as to get your fixed price quote. In your proposal please supply your normal hourly rate, but once I send you a certain schematic I'd like a fixed price quote. Thank you!
Category: Electrical       
Skills: Electrical Engineering, Electronics       

J****lEE
 [?]
Sign in to view client's details.
| J****lEE
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 19, 2014  |  Ends: 13d, 13h  |   3 Proposals
- Provide erection and fabrication drawings for the following items: 1) AN604: Stair #2 - steel & glass guardrail [06,08/AN611] (1/2" thick clear tempered glass with double painted steel post 1/2"x2", 3/16SS glass brackets and 1.5" dia. 304SS top rail) 2) AN604: Stair #2 - wall mounted handrail (1.5" dia. 304SS rail) 3) AN606: Stair #1 - steel & glass guardrail [06,08/AN611] (1/2" thick clear tempered glass with double painted steel post 1/2"x2", 3/16SS glass brackets and 1.5" dia. 304SS top rail) 4) AN606: Stair #1 - wall mounted handrail (1.5" dia. 304SS rail) (There is other rail shown on the plans that is not included in this job. If you are unsure if something is included in this job please ask.) - Drawings should be completed in the same style as the attached sample projects (Sample #1 and Sample #2). AutoCAD .dwg template file will be provided at the start of the job. - See the attached files "Sampl...
Category: CAD       
Skills: AutoCAD, Steel Detailing       

D****ing
 [?]
Sign in to view client's details.
| D****ing
|    United States
Fixed Price: Less than $500   |  Posted: Apr 19, 2014  |  Ends: 28d, 12h  |   6 Proposals
I need you to help me design and create a working prototype for a wristwatch based on a watch movement. I'll give you direction on the style and approximate size and you should be able to design a wristwatch case, wristwatch dial (face), and wristwatch hands, that will fit and function according to the type of movement that will be used. We will need your assistance in producing these working prototypes. We prefer working with someone that has previous experience in the wrist watch industry and currently has access to trustworthy and reliable manufacturers that can assist us in creating working sample prototypes based on your design and our movements. Good quality design, materials, and craftsmanship are a must for this project. We want to see your portfolio of prior designs and created prototypes if available. If we select you, prior to starting this project, you will have to agree to and sign a confidentiality agreement. You will also be required to provide us with all of the ...
Category: CAD       

n****168
 [?]
Sign in to view client's details.
| n****168
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job