Save this Search
     
Sort by:
  • Posted Date
Product Design
Hourly Rate: $8 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 58 minutes ago  |  Ends: 14d, 23h  |   2 Proposals
I am looking for someone who can work in AutoCAD fast and efficiently. I have an apartment building first floor plan and second floor plan. I need these revised to relocate the stairs. I also need you to draw the sections and the exterior elevations. I have examples to show you. Everything must be done by tomorrow. Also, I need things drawing in Imperial units.
Category: CAD       

N****290
 [?]
Sign in to view client's details.
| N****290
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 4m ago  |  Ends: 1d, 21h  |   2 Proposals
Need someone to create a resubdivision plat based on old subdivision plat and deed. Basically looking to combine to adjacent lots. Thanks
Category: CAD       
Skills: 3D Modeling, AutoCAD       
Preferred Location: United States

e****726
 [?]
Sign in to view client's details.
| e****726
|    United States
Fixed Price: Not Sure   |  Posted: 2h, 42m ago  |  Ends: 14d, 21h  |   2 Proposals
I'm looking for a talented industrial designer to develop one design concept and then two ABS plastic enclosures from the concept for devices being manufactured by my company. The enclosures, designed for home use (not industrial), will be used to house electronic sensors and actuators so the design needs to take into account a range of environmental and usage requirements. The theme is the "internet of things" where sensors and actuators are connected together and gather information that is used for some commercial benefit, typically cost savings. The IoT product enclosures you design for me are scheduled to be launched later this year. They will be battery powered, wireless and targeted at consumer markets. As part of this contract, want you to: - workshop the enclosure requirements with me and propose concepts - from the requirements, design two enclosures - produce 3D models and animations for the enclosures Product ideas that I like - The Sony PS4 power/activity li...
Category: Product Design       

T****ema
 [?]
Sign in to view client's details.
| T****ema
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 4h, 11m ago  |  Ends: 14d, 19h  |   15 Proposals
Need 3 detailed drawings either 2D or 3D with measurements. One drawing is a ring second drawing would be a 4 point star and third drawing is a flat ring with 3 legs (almost like a table). I have drawn on paper design with all measurements. I will provide picture of drawings for reference.
Category: Product Design       

j****trc
 [?]
Sign in to view client's details.
| j****trc
|    United States
Fixed Price: $20 - $35   |  Posted: 5h, 26m ago  |  Ends: 14d, 18h  |   4 Proposals
This is a small 16x24 cabin. Please see my drawing. Keep in mind this needs to be designed with little waste. There are no internal walls except the bathroom. This is a super easy layout with a loft upstairs. Using a 8:12 pitch roof. This will have a wood stove. The windows upstairs are all 48x48. The downstairs will have 36x36 windows and a 24x24 window in the bathroom. All windows are sliding windows. There is a washer/dryer under the stairs. There is no HVAC and the water heater will also be under the stairs. I need a floor plan, elevation plan, roof plan, electrical plan. We also need a foundation plan to show the 12" depth perimeter footers and 8" CMU block. This will be on a standard crawlspace. I will accept the best offer for the job but please only bid if you can get this done in next 24 hours. ************Only need a PDF as I will print the drawings locally. Please note I do not respond to bids over the budget amount********
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

I****ols
 [?]
Sign in to view client's details.
| I****ols
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 12h, 22m ago  |  Ends: 14d, 11h  |   5 Proposals
Modernus (  [obscured]  ) is an architectural product company, specializing in the design and installation of office glass partitions in the US and abroad. We are a dynamic and young company based in San Francisco, with offices in New York. We work with most of the major architectural companies nationwide and develop our own product lines in house. We are looking for a technical designer with some experience in the architectural product market, preferably in the wall partition market segment. You must be able to read and understand blue prints and generate shop drawings, familiar with aluminum profile construction and glass assemblies - door product experience would be a plus. You must have experience working in and surveying (measuring) job sites. You will need to interact with installation crews in the field on technical matters. You will have to problem solve, update the project manager and comunicate with the purchasing manager and/or vendor if need it. You must posses clear...
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

m****nus
 [?]
Sign in to view client's details.
| m****nus
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 29m ago  |  Ends: 14d, 7h  |   2 Proposals
Innovative design that our startup is focusing on. Looking for a striving individual to help grass root the prototype and possibly join our team going forward. NDA and in-person meeting required in San Francisco.
Category: Product Design       

v****ler
 [?]
Sign in to view client's details.
| v****ler
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 10m ago  |  Ends: 14d, 6h  |   3 Proposals
Are you a creative engineer? Can you take an idea and turn it into reality? Maybe build something fun? Am looking for someone who has a background in computer hardware engineering, someone whom can take an idea and figure out if an idea can work. You would also need skills (or know someone who does) in APP writing for iPhones and or Android based mobile phones. First part is to figure out if the project is possible to build. Second part is to build it. Think this is you? It's for a toy.
Category: Product Design       
Preferred Location: United States

L****_76
 [?]
Sign in to view client's details.
| L****_76
|    United Arab Emirates
Fixed Price: Not Sure   |  Posted: 19h, 27m ago  |  Ends: 14d, 4h  |   5 Proposals
We are LED fittings manufacturer, our key products are; >> Industrial High Bay ................. (Indoor Usage) >> Petrol Station Canopy Light ... (Indoor Usage) >> Flood Light ............................. (Outdoor Usage) >> Street Light ............................ (Outdoor Usage) >> Explosion Proof ..................... (Outdoor Usage) I'm looking for DaiLux Simulation and Lighting Design Services.
Category: Product Design       
Skills: Industrial Design, DaiLux, Lighting Design       

w****ttc
 [?]
Sign in to view client's details.
| w****ttc
|    Malaysia
Fixed Price: $250 - $25,000   |  Posted: 23h, 34m ago  |  Ends: 14d, 0h  |   36 Proposals
We are a fast growing company that is looking to establish a working relationship with someone who we can source our design work to. We do the concepts and the design and send you what we want. It is your job to take the notes, sketches, initial Revit layout and finish out all of the changes and details.
Category: CAD       
Skills: 3D Modeling, AutoCAD, AutoDesk Revit, CAD/AutoCAD       

M****use
 [?]
Sign in to view client's details.
| M****use
Fixed Price: Less than $500   |  Posted: Mar 28, 2015  |  Ends: 13d, 21h  |   15 Proposals
I need someone helping me finishing a concept for a small product (in the area of Bottles and Beverages). The concept still lacks on the mechanical aspects and it needs to be completed, that means a document and drawings have to be made in order to be ready to apply for a patent. Signing of a NDA is required. Its only the first step for more jobs. Overview: - First signing of NDA required - Development/Continuing of a concept especially the mechanical aspects - CAD and Document for patent application So i hope to find a good partner for more than just this job.
Category: CAD       

m****asi
 [?]
Sign in to view client's details.
| m****asi
|    Germany
Fixed Price: Less than $500   |  Posted: Mar 28, 2015  |  Ends: 13d, 20h  |   8 Proposals
Hi I require some concept drawing idea for a planning hull trailer able house boat. I want to be able to easily live in it if it is on to water or at a campsite. I had some plans but they are a little to 1960's and the other plans I have are a little to modern so a look somewhere in the middle. requirements - no wider that 2.4m no longer that 7m - room for lots solar panels - planning hull with 90hp on back - aerodynamic for towing on trailer - room for 3.3m dinghy and 15hp outboard on roof (for transit) and docking tie up at rear (when in water) - covered deck area Keywords boat marine design 3d navel naval ship
Category: Product Design       

a****iwi
 [?]
Sign in to view client's details.
| a****iwi
|    New Zealand
Fixed Price: Not Sure   |  Posted: Mar 28, 2015  |  Ends: 13d, 18h  |   20 Proposals
Build an attractive and easy to manufacture electronics enclosure to be used in a next generation wi-fi connected IoT device. Approximate dimensions of the enclosure is 180 mm x 180 mm x 70mm. The enclosure will be wall mounted with an attractive snap cover. The base houses a PCB and Terminal Block(s). The cover should house status LEDs. There may be an ON/OFF switch as well (TBD) Attractive design and easy manufacturability is a must.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, 3D Design       

p****ara
 [?]
Sign in to view client's details.
| p****ara
|    United States
Fixed Price: Less than $500   |  Posted: Mar 28, 2015  |  Ends: 13d, 14h  |   16 Proposals
I plan to manufacture photo booths and would like some fabrication drawings done so I can have people quote on the construction of the booths. I have pictures of booths we would like to model and dimensions of structure etc
Category: Product Design       

G****ell
 [?]
Sign in to view client's details.
| G****ell
|    Singapore
Fixed Price: Not Sure   |  Posted: Mar 28, 2015  |  Ends: 13d, 8h  |   12 Proposals
I have a patent on a CEILING FAN product I created some years ago. I want to create a sleek, more refined prototype proving the concept. This is the Abstract of the Patent: A fan blade assembly having both an electrical connection and a mechanical connection to a rotating hub. The assembly is configured so that a single installation motion creates the mechanical connection and the electrical connection. The electrical connection preferably includes multiple independent conductor paths. You can find a link to the patent here:   [obscured]  /patents/US20110085908 The project is for the design/prototyping of a fully working ceiling fan with detachable electrical/mechanical blades with LED embedded.
Category: Product Design       

P****lly
 [?]
Sign in to view client's details.
| P****lly
|    United States
Fixed Price: Less than $500   |  Posted: Mar 27, 2015  |  Ends: 13d, 5h  |   2 Proposals
I looking to hire a software creator to create software to help internet marketers automate advertising on various sites. I want private label rights to resell the software. Contact me for more info. Regards, David O.
Category: Product Design       
Skills: .NET Framework       

C****012
 [?]
Sign in to view client's details.
| C****012
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 13d, 4h  |   26 Proposals
Hello, I'm currently looking for a designer that can help me turn my functional, rough prototype into an aesthetically pleasing working prototype that I can show to investors and potential customers. My product is an accessory to be used on children's car seats, strollers, etc. In the proposal please include your approach to this particular job, previous work experience/samples, and estimated time it will take to complete project. Please email me for any additional information or if you have any questions. I look forward to working with you! Thanks
Category: Product Design       

L****ard
 [?]
Sign in to view client's details.
| L****ard
|    United States
Fixed Price: $100 - $200   |  Posted: Mar 27, 2015  |  Ends: 13d, 0h  |   11 Proposals
I will like a design with solidworks a ventilation radiator that has cylindrical fins with inlet and outlet, and run CFD on it. i am looking for someone experienced with solidworks. any questions please ask
Category: CAD       
Skills: ANSYS, SolidWorks       

p****042
 [?]
Sign in to view client's details.
| p****042
|    United Kingdom
Fixed Price: $100 or less   |  Posted: Mar 27, 2015  |  Ends: 12d, 23h  |   16 Proposals
we have a little side project that we wanted to bring to life, we have the idea and a rough sketch but need someone to help design it. Its not a large project and it is very simple.
Category: Product Design       

a****xon
 [?]
Sign in to view client's details.
| a****xon
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 12d, 22h  |   5 Proposals
I have to come up with a simple 2d cad drawing to scale. I would like to use LibreCAD and have someone help me do it, so that I can learn the basic functions for changes that I may have to make later. Thank you
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

a****edo
 [?]
Sign in to view client's details.
| a****edo
|    United States
Fixed Price: Less than $500   |  Posted: Mar 27, 2015  |  Ends: 12d, 22h  |   51 Proposals
We have two floorplans which were hand drawn. They must be converted to a better looking pdf or jpeg file so they can be embedded into a marketing flyer. We have an additional 4 floorplans to be converted for the same property
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

M****ANI
 [?]
Sign in to view client's details.
| M****ANI
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 27, 2015  |  Ends: 12d, 18h  |   29 Proposals
Our client is looking for a talented CAD designer for occasional work. The requirement is to create two drawings out of a handwritten plan our client creates while meeting up with a client. The first drawing is to be inserted into a sales presentation document and should be in sketch format. The next drawing is a detailed plan in AutoCAD, to be used on a construction site. The need is asap.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: North America

m****ner
 [?]
Sign in to view client's details.
| m****ner
|    Canada
Fixed Price: $500 - $1,000   |  Posted: Mar 27, 2015  |  Ends: 12d, 17h  |   10 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Nous recherchons un dessinateur 3D Solidworks pour une mission courte. Mission à rendre le 28 Février 2015.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: Mar 27, 2015  |  Ends: 12d, 17h  |   3 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Cherchons un dessinateur pour la réalisation de plans techniques. A rendre le 31 Mars 2015.
Category: CAD       
Skills: AutoCAD, OrCAD, SolidWorks, 3D Design       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Fixed Price: $500 - $1,000   |  Posted: Mar 27, 2015  |  Ends: 12d, 17h  |   2 Proposals
PROFIL TENSION SYSTEM est spécialisé dans les systèmes de tension de toile. Nous réalisons des modules de plafonds acoustiques et des façades de bâtiments pour la protection solaire.   [obscured]  -textile.com et   [obscured]   Réalisation pour un client de plans de structures en aluminium. A rendre le 31/03/15.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

p****rop
 [?]
Sign in to view client's details.
| p****rop
|    Switzerland
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job