Save this Search
     
Sort by:
  • Posted Date
Fixed Price
Fixed Price: $40 - $60   |  Posted: 1h, 48m ago  |  Ends: 14d, 21h  |   0 Proposals
1. Simulink model of a PV module under uniform insolation One should be able to adjust the values of irradiance and temperature Output curves: P-V, I-V and P-I curves 2. a. Simulink model of two PV modules in series at different irradiation, so as to generate partial shading condition. One should be able to adjust the values of irradiance and temperature so as to see how they affect the generation of these peaks Output curves: P-V. I-V and P-I curves (showing multiple peaks due to partial shading)
Category: Electrical       
Skills: MATLAB, Simulink       

h****ale
 [?]
Sign in to view client's details.
| h****ale
|    Kenya
Fixed Price: $1,000 - $5,000   |  Posted: 2h, 16m ago  |  Ends: 14d, 20h  |   1 Proposal
Design power controller for 1 to 10 hp 3 phase 480 volt induction motors. Similar in concept to VFD, however we are not looking to vary speed but vary power to motor while maintaining speed.
Category: Electrical       

j****542
 [?]
Sign in to view client's details.
| j****542
|    United States
Fixed Price: Less than $500   |  Posted: 3h, 26m ago  |  Ends: 14d, 19h  |   4 Proposals
I am looking for someone who can take a set of 2D drawings and convert them into a 3D Revit model. Providing all the outputs which are required so that they can be submitted to UK Building Control to pass building regulations (Drawings/ sections etc). I will also be looking for 3D external outputs. Applicant must have experience with this type of work and examples to demonstrate. Drawings can be provided upon request. Please apply with example of relevant work.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

P****BIM
 [?]
Sign in to view client's details.
| P****BIM *
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 4h, 15m ago  |  Ends: 14d, 18h  |   0 Proposals
Health and Safety Trainers required in the following subjects Site Safety Plus SMSTS SSSTS IOSH Managing Safely Fork Lift Truck to work freelance when required Must have the relevant qualifications.
Category: Civil & Structural       

b****ble
 [?]
Sign in to view client's details.
| b****ble
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 4h, 15m ago  |  Ends: 14d, 18h  |   0 Proposals
NVQ assessors required to assess and IV in the following subjects Steel Erecting, New Roads and Street works, Joinery. To operate freelance when required from Profiling to Qualification.
Category: Civil & Structural       

b****ble
 [?]
Sign in to view client's details.
| b****ble
|    United Kingdom
Fixed Price: $1,000 - $5,000   |  Posted: 5h, 49m ago  |  Ends: 14d, 17h  |   22 Proposals
We are a manufacturer of a unique line of manhole covers and need technical spec sheets and CAD files for Architects and Engineers to use and refer to when selecting our products for use in their projects. We have attached some samples of our square cover spec sheets we are not happy with. We want to move towards a more professional sheet and drawings such as those in the round SpecSheetExample (see attachments)
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

R****ife
 [?]
Sign in to view client's details.
| R****ife
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 6h, 56m ago  |  Ends: 14d, 16h  |   4 Proposals
Xilinx, Altera based Fpga, asic and SOC design. Vhdl, verilog, SystemC and Schematics based design capability.
Category: Product Design       
Skills: Manufacturing Design, Electronics       

m****tas
 [?]
Sign in to view client's details.
| m****tas
|    Turkey
Fixed Price: Less than $500   |  Posted: 7h, 41m ago  |  Ends: 14d, 15h  |   2 Proposals
We we need a robotics contractor, to help us succeed in our project. If have a strong background in computer vision, robotic sensor fusion and in control, please respond. This is a hourly job because I'm not yet sure what is possible, so would like to start with a feasibility analysis and go from there. The general milestones I expect are: 1. Discuss possibilities. 2. Agree to milestones. 3. A feasibility analysis and unit cost assessment of each. 4. Circuit design for one or more of these. We need a roboticist who is passionate about coding and lives to solve technical challenges. You should be obsessed with keeping your code neatly documented, excited by improvements in performance/efficiency/reliability, comfortable with ambiguity, and driven to make things work. You'll be working with custom-built controller boards, so knowing your way around a circuit is a must and past experience in robotic control is a huge plus. While decades of work experience is not necessary, you should ...
Category: Other - Engineering &...       

z****ger
 [?]
Sign in to view client's details.
| z****ger
|    Switzerland
Fixed Price: Not Sure   |  Posted: 10h, 26m ago  |  Ends: 14d, 12h  |   0 Proposals
I am looking to hire a marketing company to help our business grow. looking for innovative marketing tecnhiques
Category: Other - Engineering &...       
Skills: 570, 718, Innovative Marketing       
Preferred Location: United Arab Emirates

R****dad
 [?]
Sign in to view client's details.
| R****dad
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: 13h, 42m ago  |  Ends: 14d, 9h  |   0 Proposals
Dears, Nice to contact you! I'm Clare, the representative of Good Enterprise SZ Limited. We are looking for Korean freelance translators as our long- term partners. Good Enterprise SZ Ltd is a well-known professional translation agency, located in Shenzhen, China. We mainly translate such documentations as user manuals, gift box features, marketing materials, websites and software applications. For more information about our company, please visit the website. What areas or technical fields are you experienced and MOST specialized in? Do you have any experience in medical, electric, electronic or car/truck/automotive fields? May I know your Skype, thus we can talk to each other easily and conveniently. If you are interested, please contact me and send your CV a.s.a.p. Thanks! Looking forward to working with you soon. Welcome to join our team! Best regards, Clare March 3, 2015
Category: Other - Engineering &...       

C****213
 [?]
Sign in to view client's details.
| C****213 *
|    China
Fixed Price: Not Sure   |  Posted: 14h, 35m ago  |  Ends: 14d, 8h  |   6 Proposals
interested in contracting out with a design firm to help come up with 3d model/CAD and then prototype of watch bands for the Apple Watch band strap I own a watch company that has watches with stone faces (plugandfeather.com) Interested in potentially starting with bands that have links made out of stones
Category: Product Design       

s****007
 [?]
Sign in to view client's details.
| s****007
|    United States
Fixed Price: Not Sure   |  Posted: 16h, 47m ago  |  Ends: 14d, 6h  |   11 Proposals
Hello, My name is Robert, I am looking for individuals or companies to help design a custom raspberry pi or arduino pid temperature controller. We are creating our own brand essential oil vaporizer but do not like the current chinese pid controller boxes on the market. We need this part to help build our own enail   [obscured]  /?gws_rd=ssl#q=enail The controller Operating voltage: 120V/240V AC. Maximum 5 Amp Coil connection: XLR 5 Pin Some programming and control needs for micro controller keep temperature plus or minus a few degrees timed shut down after no active use temperature range of 0-1000 F We are open minded to the design of the entire project as we need Custom modular box that can connect more than one box unit   [obscured]  -nail.org/EnailParts is most the parts needed From ssr relay. pid controller, case, switches and so on. The pid controller and the microcontroller is the most important part in that i need the cheapest highest quality design that will...
Category: Electrical       
Preferred Location: North America, Eastern Europe, Eastern Asia

T****ng1
 [?]
Sign in to view client's details.
| T****ng1
|    United States
Fixed Price: Less than $500   |  Posted: 17h, 32m ago  |  Ends: 14d, 5h  |   16 Proposals
I need to get some different digital mock ups of a house. I am not sure where to post this job. I have plans for house and some images of just framing. Not sure how we want it designed so we want to get some mock ups such as one with smooth stucco one with wooden siding ect. maybe 2-3 different options. hope to find someone for the job!
Category: Architecture       

C****s10
 [?]
Sign in to view client's details.
| C****s10
|    United States
Fixed Price: Not Sure   |  Posted: 20h, 52m ago  |  Ends: 14d, 2h  |   8 Proposals
I need a some one to cut and paint some wood parts for a product. I have the drawings and specifications. I need someone who can fulfill mass production orders. I need someone who is willing to make minor adjustment to engineering drawings if needed. Looking for a competent and trustworthy manufacturer who can work the job quickly, accurately, and speedily. I need a sample of the wood first.
Category: Other - Engineering &...       

K****son
 [?]
Sign in to view client's details.
| K****son
|    United States
Fixed Price: Not Sure   |  Posted: 21h, 16m ago  |  Ends: 14d, 1h  |   15 Proposals
Position Summary: We're looking for a tinkerer, someone who is passionate about coding and lives to solve technical challenges. You should be obsessed with keeping your code neatly documented, excited by improvements in performance/efficiency/reliability, comfortable with ambiguity, and driven to make things work. You'll be working with custom-built controller boards and robotic prostheses, so knowing your way around a circuit is a must and past experience in robotic control is a huge plus. While decades of work experience is not necessary, you should be comfortable with documenting your design process, be willing to operate under a strict quality system, and be prepared to communicate back-and-forth with our engineering team. What you'll be doing: ? Designing and developing embedded systems software and hardware for next-gen prosthetic limb control devices ? Testing, troubleshooting, and debugging embedded systems ? Working closely with a team of software and hardware engineer...
Category: Electrical       

r****iki
 [?]
Sign in to view client's details.
| r****iki
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Mar 02, 2015  |  Ends: 24d, 22h  |   7 Proposals
Sviluppo di una scheda che trasmetta su onde convogliate (rete elettrica domestica 220 V) 2 input digitali (on/off) e abbia due output digitali. La scheda è indirizzabile ed interrrogabile da PC, con possibilità di inviare comandi ad ogni singolo indirizzo. Necessita solo il progetto elettrico..
Category: Electrical       

r****i46
 [?]
Sign in to view client's details.
| r****i46
|    Italy
Fixed Price: $1,000 - $5,000   |  Posted: Mar 02, 2015  |  Ends: 39d, 22h  |   4 Proposals
Estoy buscando un arquitecto freelance que pueda realizar un Proyecto de Ejecución para solicitar el acta de replanteo y empezar urgentemente una obra. También necesitaré un arquitecto técnico/aparejador para realizar la dirección de la obra una vez se inicie. Se trata de un proyecto de ejecución de un unifamiliar el Mungia (Vizcaya) y también si lo podría tener preparado y visado para el día 31 de Marzo ya que vence el plazo de la licencia municipal para edificar en el terreno. Será una construcción con estructura de madera. Mandaré a un fabricante hacer la estructura incluyendo aislamiento de 200 mm de lana de roca y carpinteros que me la montarán. Luego, contrataré los gremios uno a uno, para ejecutar cada partida. Me gustaría acercarme mucho a los criterios Passivhauss, sé que llegar a los criterios de la certificación puede llegar a encarecer la obra por lo que si vemos que nos podemos pasar el presupuesto valoraríamos el quedarnos cerca del estándar sin llegar a alcanzar los ...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: Spain

m****ako
 [?]
Sign in to view client's details.
| m****ako
|    Spain
Fixed Price: Not Sure   |  Posted: Mar 02, 2015  |  Ends: 88d, 22h  |   17 Proposals
Hey - I am a toronto based independent artist and need someone to help me design some PCBs for a project I am working on. I have sample designs but want to work with someone to improve on them. From what I understand, the project would be very straight forward and not difficult for anyone with any experience/education... but I have neither. I would like to work with someone from Toronto, but am open to anyone at this time.
Category: Electrical       
Preferred Location: Canada

R****val
 [?]
Sign in to view client's details.
| R****val
|    Canada
Fixed Price: $500 - $1,000   |  Posted: Mar 02, 2015  |  Ends: 13d, 22h  |   4 Proposals
I am petroleum engineer i am training in ministry. I am need to job in Elance and to increasing to chance of job.
Category: Other - Engineering &...       

m****844
 [?]
Sign in to view client's details.
| m****844
|    Yemen
Fixed Price: $500 - $1,000   |  Posted: Mar 02, 2015  |  Ends: 13d, 21h  |   0 Proposals
petroleum engineer is working of company and to ministry . i need to job in Elance and to increasing to chance of job
Category: Other - Engineering &...       

m****844
 [?]
Sign in to view client's details.
| m****844
|    Yemen
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job