Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: 3h, 44m ago  |  Ends: 14d, 20h  |   0 Proposals
We have a project for a public entity located in Colorado. It consists of two sculptures. We already know how we are going to fabricate them, and will be putting together our own construction drawings. We will need an engineer to determine if our design meets requirements, make any suggestions needed to fabrication process to meet requirements, and provide Engineering stamp for City Engineer to approve. Stamp must be a Colorado stamp. This needs to be on a contract or not to exceed basis, not an hourly rate. Once we have had a discussion regarding the project, I will provide our drawings to provide an estimate from. Thanks,
Category: Civil & Structural       
Skills: Structural Engineering       
Preferred Location: North America

j****ott
 [?]
Sign in to view client's details.
| j****ott
|    United States
Fixed Price: Less than $500   |  Posted: 5h, 19m ago  |  Ends: 14d, 18h  |   1 Proposal
Hello and thank you for looking. I have a parcel of land that I want to build on. It's not too big, about 2 acres but most of it is located in the flood zone and the county is asking me to do a hydro analysis to see the drainage and other issues so we can resolve it. Perhaps a civil engineer who also does hydro analysis? It doesn't have to be like a complex report.
Category: Civil & Structural       
Skills: Civil Engineering       

s****nfa
 [?]
Sign in to view client's details.
| s****nfa
|    United States
Fixed Price: Not Sure   |  Posted: 10h, 2m ago  |  Ends: 14d, 13h  |   29 Proposals
I require a preliminary floor plan and 3D rendering for two new studio apartments in an existing building. I will provide the existing overall dimemsions and a preferred layout. Deliverables will be a dimensioned floor plan and a 3D drawing suitable for discussion purposes and preliminary costing only.
Category: Architecture       
Skills: 3D Modeling, 3D Design, 3D Rendering, ACDSee       

r****ler
 [?]
Sign in to view client's details.
| r****ler
|    Canada
Fixed Price: $500 - $1,000   |  Posted: 15h, 40m ago  |  Ends: 14d, 8h  |   14 Proposals
Hi, I am looking for an architect who can provides services to convert a loft space into 2 rooms and a roof terrace. This would involve taking some 2D survey information and providing possible design options using Revit to try and visualize what can actually be achieved. Architect must be experienced enough to give advice on the relevant planning requirements and subsequently be able to complete a set of drawings sufficient to take the project (through planning if necessary) and through through building regs, tender and construction.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

P****BIM
 [?]
Sign in to view client's details.
| P****BIM *
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 18h, 46m ago  |  Ends: 14d, 5h  |   7 Proposals
Need to do architecture calculation for occupancy load of the building approximately 6000sq.ft. To determine how many people can be in the facility at the same time. This is for Adult Day Health Center. Located in Los Angeles unincorporated area. Must look rules for Los Angeles unincorporated area. I will provide all floor drawings. This form i have to fill out for culculation
Category: Civil & Structural       

m****one
 [?]
Sign in to view client's details.
| m****one
|    United States
Fixed Price: Not Sure   |  Posted: May 27, 2015  |  Ends: 58d, 21h  |   3 Proposals
we seek an engineer or qualified person to be able to take our architectural designs of primarily aluminum architectural canopies that are attached to various building types after we construct and apply the calculation to these simple architectural files to submit to our engineer for PE stamping upon validation,,, if you have your PE stamp and can qualify the calculations so we can proceed with the build all the better,,,please respond asap,,,must be in Texas for stamping authorization and the nearer to Houston the better,,,
Category: Civil & Structural       
Preferred Location: United States

s****nst
 [?]
Sign in to view client's details.
| s****nst
|    United States
Fixed Price: Less than $500   |  Posted: May 27, 2015  |  Closed  |   0 Proposals
Applying for a Conditional Use Permit and need help with the Application Process and Forms. Also need help with the ABC License Application. Ideally you have extensive experience in Land Use and these forms are routine for you. Your bid should be based on what exactly you can do to help. If you can only create the 2 forms, then that's fine. Just bid accordingly. If you can assist with entire process, including dealing with objections and obstacles in getting the CUP Approval then please bid accordingly. Ideally be able to help with the ABC License but I can find someone else for that if needed. Need Planning Forms for Conditional Use Permit. 1. Neighborhood Context Map   [obscured]  -rosa.ca.us/doclib/Documents/CDP_Site_Analysis_Neighborhood_Context.pdf 2. Vicinity Map.
Category: Architecture       

d****ls7
 [?]
Sign in to view client's details.
| d****ls7
|    United States
Fixed Price: About $20   |  Posted: May 27, 2015  |  Ends: 5d, 12h  |   4 Proposals
Hi. We would like this project to be completed by June 1st. Please provide a 'take-off' and prepare an excel spreadsheet for the following trades: Steel stud framing, non-structural - Gauge, width, length, and quantity. Drywall - Type of drywall and square feet. Paint - Square feet, doors quantity. Flooring - Type needed and square feet. Please ensure that the commas are replaced with periods in the excel spreadsheet as requested. Please provide any special requirements noted on plans as well. Again, this project is $20 flat fee per job. Thanks. Best, Opi   [obscured]  /s/0yqv3nhbp4pywx3/Walmart%20Plans.zip?dl=0
Category: Civil & Structural       

B****INC
 [?]
Sign in to view client's details.
| B****INC
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: May 27, 2015  |  Ends: 13d, 10h  |   21 Proposals
Step 1. Draft building consists of flange, the size range and the building height upstream. (Pay 20% of Design) Step 2. Draft flange completed all interiors (can be changed 3 times). (Pay 40% of Design) Step 3. Present finish with images 3 dimensions. And the detailed material to be used in the project briefly. (Pay 40% of Design)
Category: Architecture       
Skills: 3D, ArchiCAD, Architecture, Home Design       

C****seT
 [?]
Sign in to view client's details.
| C****seT
|    Thailand
Fixed Price: Less than $500   |  Posted: May 27, 2015  |  Closed  |   4 Proposals
We are looking for a professional that can create an Autodesk Revit Ceiling Based lighting family for suspended ceilings for us. We have the CAD files. We just need a proper Revit Family file that architects can use in their projects.
Category: Architecture       
Skills: Autodesk Inventor, AutoCAD, AutoDesk Revit       

R****dBV
 [?]
Sign in to view client's details.
| R****dBV
|    Netherlands
Fixed Price: Less than $500   |  Posted: May 26, 2015  |  Closed  |   4 Proposals
I have a residential home survey Plat but do not know how to accurately read it. I need to get lot dimensions and the total number of square feet for the lot.
Category: Architecture       
Skills: ArchiCAD, Architecture, Home Design, Mathematics       
Preferred Location: North America

b****MPR
 [?]
Sign in to view client's details.
| b****MPR
|    United States
Fixed Price: Not Sure   |  Posted: May 26, 2015  |  Closed  |   3 Proposals
The attached leaching chamber is for use under pavement in parking areas not traffic areas. It will always have one foot of soil cover weighing approximately 2400 pounds the unit itself weighs about 1500 pounds. It is to be designed to an H20 standard. The unit will be placed on mechanically compacted sandy soil. I need to determine the thickness of the vertical walls (bearing surface) at the sand surface that will support the load. without significant subsidence.
Category: Civil & Structural       

K****025
 [?]
Sign in to view client's details.
| K****025
|    United States
Fixed Price: Less than $500   |  Posted: May 26, 2015  |  Closed  |   25 Proposals
Need floor plan redrawn that I received from a subdivision so that it has same format as sample (393 Song Bird). I need this done before 3pm PST today.
Category: Architecture       
Skills: Architecture, AutoCAD       

t****cyo
 [?]
Sign in to view client's details.
| t****cyo
|    United States
Fixed Price: Not Sure   |  Posted: May 26, 2015  |  Ends: 12d, 13h  |   33 Proposals
Project Brief for Gregory Street 2015 Project Warehouse & Office Facility for resale. Overview 20M X 36M open plan warehouse with 2 side roller door entry & modern open plan office 20M X 15M Requirements. Area Total Notes Reception/waiting area. 1 Interview room. 1 Open plan office area for 20 staff. 1 Separate office. 4 Chat room. 2 Board room. 1 Male toilets. 4 Female toilets. 4 Disabled toilets. 1 Break out area. 2 Café/Kitchen. 1 Shower. 1 Block is approx. 40M wide by 65M deep total area 2700M Security. Automatic front gate. Entry to building will be secure entry to reception area then secure entry to office area. Parking. Sealed parking & curbed landscaped areas. Visitor at front & staff at side.
Category: Architecture       
Skills: Architecture, AutoCAD, Interior Design       

r****ace
 [?]
Sign in to view client's details.
| r****ace
|    Australia
Fixed Price: Not Sure   |  Posted: May 26, 2015  |  Closed  |   41 Proposals
I need a realistic interior flat render. It will include kitchen, corridor and a part of lounge. I need it finish with materials, furniture, etc. I will supply dwg.
Category: Architecture       
Skills: AutoCAD, SketchUp Pro       

r****ols
 [?]
Sign in to view client's details.
| r****ols
|    Spain
Fixed Price: Less than $500   |  Posted: May 25, 2015  |  Closed  |   11 Proposals
I have a project that has been reasonably well documented in Revit 2015, however, needs schedules, details and final works done to get ready for construction. Simple 7 unit townhouse project. I have the Revit File and PDF of sample project (revit file of sample available for awarded company)
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoDesk Revit       

a****cts
 [?]
Sign in to view client's details.
| a****cts
|    Australia
Fixed Price: About $50   |  Posted: May 25, 2015  |  Closed  |   6 Proposals
Urgently required: Transpose basement plan hand drawn mark ups in to Acrobat Pro mark ups on unmarked copy of plan, using the same colours as in hand drawn plan key. All hand drawn comments are to be typed in capital letters inside Callout Tool boxes with the Callout Tool boxes placed around the perimeter of the floor plan, pointing to the area/s of interest. Key also to be typed and drawn using Acrobat Pro mark ups in the same position as in current hand drawn copy.
Category: Architecture       

R****tes
 [?]
Sign in to view client's details.
| R****tes
|    Australia
Fixed Price: $1,000 - $5,000   |  Posted: May 25, 2015  |  Ends: 11d, 6h  |   32 Proposals
Shop Drawings in Auto Cad showing details of building envelop components for 3 one-floor buildings.The shop drawings should be released from experienced facade designer based on architectural reference drawings that we provide. Let me know first your skills, historical references and how fast you are. I will invite you if your skills match the work details.
Category: Architecture       
Skills: AutoCAD, Building Architecture       

N****ven
 [?]
Sign in to view client's details.
| N****ven
|    United Arab Emirates
Fixed Price: Less than $500   |  Posted: May 24, 2015  |  Ends: 10d, 21h  |   12 Proposals
I need to have an Engineer do the framing plans on a home for a job I am working on to bid out to estimate my budget. The city I am in is Frisco Texas and they require the plans to be stamped by and engineer. There are several wide rooms and a covered porch that will need to have trusses/glulam beams with cross boards to support the open spans. I also need someone who is familiar with cost to help me figure out the most affordable take off for materials. I have the floor plan, roof plan, elevation plans in an editable autocad file format to work from. See attached pdf floor plan. I look forward to your bid !
Category: Civil & Structural       
Skills: AutoCAD, Civil Engineering       

k****123
 [?]
Sign in to view client's details.
| k****123
|    United States
Fixed Price: Less than $500   |  Posted: May 24, 2015  |  Ends: 10d, 4h  |   32 Proposals
We would like to add addition in our existing home. At this moment we have 1200 Feet, but we could add up to 2000 feet more. we like to have 2 options one adding 499 sq and one for between 1500 to 1800 sq feet. it is corner lot. please check on google map out side view. Our Goal. 1. present current layout as much as could. 2. Add dinning room area next to kitchen toward back yard. 3. Add master bedroom with full bath. 4. Add laundry room 5. be very cost effective. not moving stuff to much. 6. Add deck basically you will be responsible for. 1. Blue print, Design of outside and inside, structural, footing, plumbing, electric,ac. what ever we need for finishing home. we will be open to any suggestion.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

l****all
 [?]
Sign in to view client's details.
| l****all
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: May 24, 2015  |  Ends: 10d, 4h  |   41 Proposals
We will provide 2d autocad drawings of Kitchens & we need these rendered in 3d as photorealistically as possible. The intention is to create a catalogue of sorts, that will act as ideas for inspiration. Initially, we will be requiring 50 kitchen renders, of different shapes and finishes. You are free to choose materials and decor around the kitchen, so as to create 50 unique designs. For each 3d design, you will have to render and provide 2 views from different angles. One unique finish is sufficient for each 3d design. There will be future work following this, including more kitchens, furniture, bathrooms, living rooms, bedrooms etc., based on work quality and a good working relationship.
Category: Architecture       

n****rrr
 [?]
Sign in to view client's details.
| n****rrr
|    India
Fixed Price: $300 - $700   |  Posted: May 23, 2015  |  Ends: 10d, 0h  |   19 Proposals
I need architect for my new home design Cheif architect or AutoCAD revit any design software can be used. It has been drafted 95% accrording to australian standards but needs some improvents. Its 3 story house. Attached is some views and plans and will advise soon all the changes required. Attached is old copy and I have soft copy of this drawn in AutoCAD revit if it helps and will disclose exact things to person who is awarded with this project. This is extra but u need to quote now and finish after above. Need 3d rendered views of all the rooms on gound floor and first floor. Deliveries 1)Soft copy of design 2)Pdf files 1:100 scale for three floor plans, site plan, 4 elevations from all four directions maximum building and wall height labled from natural ground level. 3)Electrical layout only the lighting (that is lamps) for energy rating 4)Elevations from ngl provided in pdf file and dwg provided by land surveyor levels and for heights levels should be taken 2m inside from righ...
Category: Architecture       

m****aer
 [?]
Sign in to view client's details.
| m****aer
|    Australia
Fixed Price: Not Sure   |  Posted: May 23, 2015  |  Ends: 9d, 13h  |   21 Proposals
Design and produce construction drawings for residential and commercial projects, including, new projects, renovations, remodel, kitchen design, etc. Plan material take offs Price will be fixed based on size and complexity of project
Category: Architecture       
Skills: 3D Modeling, Architecture, Home Design       

s****nek
 [?]
Sign in to view client's details.
| s****nek
|    Canada
Fixed Price: Less than $500   |  Posted: May 23, 2015  |  Closed  |   4 Proposals
Your project is to: 1. Review an existing plan for a basement car park (8 vehicles) for compliance with all relevant Australian Standards for parking facilities, including AS2890. 2. Identify all non-compliant aspects. 3. Identify opportunities to reduce the length of the car park. 4. Provide feedback in writing.
Category: Architecture       
Skills: Architecture       
Preferred Location: Australia

C****nts
 [?]
Sign in to view client's details.
| C****nts
|    Australia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job