Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 59 minutes ago  |  Ends: 14d, 23h  |   2 Proposals
looking for help with some landscape area takeoffs. We have plans that can be sent out immediately.
Category: Civil & Structural       

T****B_C
 [?]
Sign in to view client's details.
| T****B_C
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 52m ago  |  Ends: 14d, 6h  |   16 Proposals
rework bracket for correct pem's fix deminsions and include side view look at the drawing that shows the side view for the pem sizes
Category: CAD       
Skills: AutoCAD       

S****079
 [?]
Sign in to view client's details.
| S****079
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: 18h, 11m ago  |  Ends: 14d, 5h  |   13 Proposals
I am looking at a 3 room free standing garage with electrical. Can you help me with the drafing part, I will get you the information, just need it in a legible- presentable to the city format.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

k****mer
 [?]
Sign in to view client's details.
| k****mer
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: 7-9 months  |  Posted: 21h, 31m ago  |  Ends: 14d, 2h  |   4 Proposals
Perform project estimates and cost control including planning and scheduling project monitoring and materials take off
Category: Civil & Structural       

m****che
 [?]
Sign in to view client's details.
| m****che
|    Philippines
Hourly Rate: $15 - $20 / hr   |  Duration: 1-3 months  |  Posted: 21h, 56m ago  |  Ends: 14d, 2h  |   2 Proposals
I would like to design a battery powered, automatically navigated, sauna barge for use in a lake north of Stockholm, Sweden. We need an engineer who can design the systems needed.
Category: Civil & Structural       

i****k90
 [?]
Sign in to view client's details.
| i****k90 *
|    Ukraine
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 02, 2015  |  Ends: 13d, 16h  |   53 Proposals
I'm looking for a draftsperson to redraw a set of scanned architectural plans onto AutoCAD. Only the structural elements need to be redrawn (walls, stairs, etc.). There are limited dimensions on the scans, but the plans have been drawn to a 1:100 scale, so it is advisable to print the plans to scale and measure dimensions off them. Along with the scans, I will provide a keyplan showing the thicknesses of the structural walls and their type (blockwork, brickwork, etc.), so that you can draw them to their correct widths. The job includes 3 levels (basement, ground and first floor), with each level being approximately 800m2 in area. Please submit your applications along with any relevant experience/examples you've had with similar tasks. Regards, Boris
Category: CAD       

B****vic
 [?]
Sign in to view client's details.
| B****vic
|    Australia
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Jul 01, 2015  |  Ends: 13d, 12h  |   4 Proposals
I will be in need of someone to help me with a project tomorrow. One of the members in my group had something come up and the remainder of the team members and I have our hands full. We will need someone to help with a shallow foundation design so that we can present Friday. We are all getting together tomorrow at 9:30am eastern and would love to chat over Skype to get some guidance as to what formulas to use and how to go about approaching the problem. We are not asking for the work to be done for us, rather, just some help on how to get it set up so that we can plug and chug from there. We all have our hands full and could really use help for our design project.
Category: Civil & Structural       

g****ael
 [?]
Sign in to view client's details.
| g****ael
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 01, 2015  |  Ends: 13d, 9h  |   25 Proposals
In search for an inexperienced engineer that wants to be apart of something brand new. It seems easy to me but I'm no engineer. This is a new product dealing with plastic maybe injection molding. perhaps a 3d model will suffice.
Category: CAD       
Skills: 3D Printing       

c****myn
 [?]
Sign in to view client's details.
| c****myn *
Fixed Price: Less than $500   |  Posted: Jul 01, 2015  |  Ends: 28d, 6h  |   35 Proposals
I am looking for a rendering and site plan of an office building and hotel on 4 acres. The office building will be 3 stories, 30,000 square feet, with retail on the first floor and office space on the 2nd and 3rd floor. It will be a modern design similar to the attachment. The hotel will be 4 stories and 105 rooms. It will likely be similar to this hotel   [obscured]  /propertyimages/brandgeneric/fn/fn_main01_r.jpg?resize=0.5x:0.5x
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

s****tte
 [?]
Sign in to view client's details.
| s****tte
|    United States
Fixed Price: Not Sure   |  Posted: Jul 01, 2015  |  Ends: 12d, 22h  |   14 Proposals
Job Name: Project #06134 A. General Comments: 1. This is a fast track job and we need submittal drawings as quicikly as possible. ---------- B. Description: 1. Detailing of stainless steel and glass guardrail system and other miscellaneous items. ---------- C. Scope: 1. A1.01: (103lf) - Glass guardrail system at Stair A a. 1-1/2" dia. stainless steel handrails with stainless steel glass and post mounted rail brackets. b. Stainless steel glass support brackets mounted to stair stringer. c. Stainless steel vertical stanchions, 1/2"x2-1/2" with stainless steel base plate where specified. d. GL-6: 3/4" starphire, clear tempered glass infill panels e. Finish: #4 satin stainless steel, T304 2. A1.02: (181lf) - Glass guardrail system at Pavilion Upper Exhibit Space a. 1-1/2" dia. stainless steel handrails with stainless steel glass mounted rail brackets. b. Aluminum glass shoe support with stainless steel trims. c. GL-6: 3/4" starphire, c...
Category: CAD       
Skills: AutoCAD       
Preferred Location: North America, Western Europe, Eastern Europe, Central & South America, Australia/Oceania

D****ing
 [?]
Sign in to view client's details.
| D****ing
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 30, 2015  |  Ends: 12d, 5h  |   1 Proposal
Project Manager,Quantity Surveyor,Estimator,Resident Engineer,,Project Manager,Quantity Surveyor,Estimator,Resident Engineer,,Project Manager,Quantity Surveyor,Estimator,Resident Engineer,,
Category: Civil & Structural       

b****leb
 [?]
Sign in to view client's details.
| b****leb
|    United Arab Emirates
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 30, 2015  |  Ends: 12d, 2h  |   6 Proposals
I just built a steel structure for a second floor for a former 20' high automotive shop. We are currently in the process of pouring a floor. I would like to hire the services of a structural engineer to specify headers for a door and about 8 windows that I am cutting into 8" concrete block. While this may be out of the purview of a structural engineer I need advice on fire codes for a staircase, and the construction of walls for offices occupied by separate tenants. The project is in New York State
Category: Civil & Structural       

p****jbn
 [?]
Sign in to view client's details.
| p****jbn
|    United States
Fixed Price: $100 - $150   |  Posted: Jun 30, 2015  |  Ends: 12d, 1h  |   17 Proposals
We have a requirement for a freelancer to create a PCB Layout for a development board. We have a schematic and a design file in RS-Online's PCB software "DesignSpark". The PCB Layout can be created in DesignSpark or Eagle and it must be to a manufacture's standard so that we can have it made. It must have all masks, screens etc. The Board is to be 2 layer. We have a PCB file already which needs someone with experience in PCB design and layout to look at it and improve it.
Category: CAD       
Preferred Location: Western Europe, Eastern Europe, India/Southern Asia, Eastern Asia

U****ies
 [?]
Sign in to view client's details.
| U****ies
|    United Kingdom
Hourly Rate: $10 - $15 / hr   |  Duration: 1-3 months  |  Posted: Jun 29, 2015  |  Ends: 11d, 13h  |   15 Proposals
Need a civil 3d expert - experience with topographies - model pipe networks - model roads and sidewalks
Category: Civil & Structural       

t****tph
 [?]
Sign in to view client's details.
| t****tph
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 29, 2015  |  Ends: 11d, 12h  |   43 Proposals
HI all, I need 3 drawings completed for 3 electrical cabinets we are having built. Done in cad or illustrator or whatever. Just need to clearly communicate to overseas manufacturer. Attached is something similar used previously for another company. Attached also are photos. First cabinet: battery cabinet 1200 high x 600w x 350 d with 3 internal shelves to support max 75kg per shelf (total 4 batteries stored inside) (for indoor and outdoor installation) (2 x 32mm hole punched in each end of shelves) Air vents covered with vermin mesh (front bottom & back wall high) on skids for indoor and outdoor installation (silver colour paint finish) Second cabinet: battery cabinet 900 high x 1200 wide x 600 deep with 3 internal shelves to support max 400kg per shelf 2 x 32mm hole punched in each end of shelves (total 4 levels of batteries inside) (is it possible for all shelves to be removable?) (on skids for indoor and outdoor installation) Air vents covered with vermin mesh ...
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

h****ory
 [?]
Sign in to view client's details.
| h****ory
|    Australia
Fixed Price: $20 - $75   |  Posted: Jun 29, 2015  |  Ends: 3d, 2h  |   8 Proposals
I am looking for a complete design of a mobile Espresso Bar. After your design the carpenter will build the final product. WORK - PRODUCT A Mobile Espresso Bar (see attached pictures) Basis of the mobile espresso bar should be 1. a 1260x790mm kitchen island and needs to be adapted to it needs (for example an ikea stenstorp kitchen island). OR 2. Draw an own model This semifinished product has to be finished to a Mobile Espresso Bar. It should provide space for: Above Countertop :: Coffee Mashine (600x600x700mm (Width/Depth/Height)) :: Grinder :: Countertop Lid, straw and Condiment Organizers :: All kind of holes for supply (electric, water, waste etc) :: Refridgerator for cold drinks and/or take away cake/sandwiches smoothies :: a space where a customer can prepare his coffee, example to finish with sugar, stir and put a top on the cup. :: A space where the customer can drink the coffee. Can be made with one of the sideparts (see closing) :: any input or ideas will be great Belo...
Category: CAD       
Skills: 3D, 3D Modeling, AutoCAD, Manufacturing Design       

w****nfo
 [?]
Sign in to view client's details.
| w****nfo
|    Austria
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Jun 29, 2015  |  Ends: 10d, 15h  |   5 Proposals
Looking for an experience RC detailer using EC2 I am looking for someone who can guide me for full detail design. from Ukraine and Romania and other eastern Europeans are welcome
Category: Civil & Structural       
Skills: Structural Engineering       

l****n70
 [?]
Sign in to view client's details.
| l****n70
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Jun 28, 2015  |  Ends: 10d, 13h  |   21 Proposals
Hello! I have a built a prototype for a bed frame and I want to have it produced by others. I need drawings made up to give to the manufacturer. I will provide photos of the prototype and hand sketches showing the dimensions. It is solid wood. No particle board or other such manufactured wood products. I need from the designer: 1. Drawings to provide the manufacturers for bids and construction 2. Creative input on how to make the bed easier to manufacture. 3. Input on how to make the bed less expensive to manufacture. 4. Input on how to make the bed easier for the consumer to assemble. Start date is not critical and delivery date is flexible. Thanks! Andy
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

A****Kas
 [?]
Sign in to view client's details.
| A****Kas
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 2d, 8h  |   55 Proposals
I need someone to take my "technical" drawings, specifications, and ideas and turn them into CAD drawings that I can submit for prototyping and manufacturing. I've provided 85% of what is needed, I just lack the skill to get that last 15% done. There will be some assistance needed from you to determine fabrication material and tolerances. Currently, I have 8 drawings showing every component of the device and can work daily with you on any questions or specifics you need from me to complete the project. I would prefer someone to provide an hourly rate bid then we can discuss how many hours you will need to complete once you have had a chance to review the drawings and the scope of the project. I'm mechanically inclined, and have taken some engineering courses so I'll be able to partner with you until we get it right. If all goes well, future work can be awarded to you on a project by project basis. While timelines are fluctuating, I'd like to get the project started b...
Category: CAD       
Skills: AutoCAD, Manufacturing Design       

K****nis
 [?]
Sign in to view client's details.
| K****nis
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 9d, 17h  |   10 Proposals
I require assistance of an AutoCAD Expert to do some research and provide me the best designs. Details will be provided in the interviewing phase. Proposals shall be accompanied by details of work you can and overall experience.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       
Preferred Location: Pakistan

r****ani
 [?]
Sign in to view client's details.
| r****ani
|    Pakistan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 27, 2015  |  Ends: 8d, 22h  |   2 Proposals
We are a luxury fashion activewear company located in Europe. We are currently shortlisting for a highly skilled and experienced Sportswear/Activewear & Apparel Creative Pattern Cutter/Grader. The successful applicant will be able to bring flair, accuracy and attention to detail with a strong eye for fit throughout the development process. Role includes: ? Reporting to and working closely with the designer ? Assist in design meetings ? Responsible for producing creative patterns from sketches, drawings or inspiration from a book ? advise on suitable fabric compilation ? Responsible for patterns from design stage through to final pattern ready for final construction (either manual or software) ready to hand to manufacturer and complete all specification sheets ready for production. Accuracy of patterns is extremely important, all patterns must be correct (notches match, drill holes are marked, correctly annotated and all pieces fit together. Candidate brings: ? Ideally working w...
Category: CAD       

i****ess
 [?]
Sign in to view client's details.
| i****ess
|    Switzerland
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 27, 2015  |  Ends: 8d, 19h  |   9 Proposals
Connection Design Report for a small steel structure in BS 5950 with 7 connections. Reaction Forces for Drawing 508 provided in attached pdf. Urgently Required.
Category: Civil & Structural       

c****anm
 [?]
Sign in to view client's details.
| c****anm
|    United Arab Emirates
Fixed Price: $20 - $100   |  Posted: Jun 26, 2015  |  Ends: 8d, 10h  |   19 Proposals
I am looking for an Honest and ethical Engineer with an experience to design a simple small home with the following dimensions and requirements. I know my budget is low but please I request if you cannot do the project per the set budget and the time don't bother to bid and ask me for more money later. This is not an hourly rate job. it is a flat rate. and if you do a good job I will give you a good rating. Dimensions 1- the house is 1200ft (30ft X40ft) 2-three story concrete floor 3-First floor ( ground floor) has one bedroom with bathroom, a garage, kitchen dining room and living room and a common bathroom 4- second floor has four rooms with one bathroom 5-third floor same as second floor house Is made of a bricks and has suspended concrete slab Requirement: Honest and ethical Engineer Structural Engineer/civil Architect need a complete plan with quantity calculations structural calculations of the slab, columns, and beams 3D modelling plan Due date with in 2 weeks. thanks Abdi(I...
Category: Civil & Structural       

J****mac
 [?]
Sign in to view client's details.
| J****mac
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job