Save this Search
     
Sort by:
  • Posted Date
Contract Manufacturing
Fixed Price: Less than $500   |  Posted: 6h, 19m ago  |  Ends: 14d, 17h  |   5 Proposals
We have a basic plan for adding a second level to an existing ferry boat. We aren't looking for design help. We just need to know what size and type of steel beams we should be using to minimize weight, and maximize space. The footings are not a problem, they are stable. The size of the space is 21 meters long, 7.5 wide on one end, and 6.5 meters wide on the other, with an almost constant taper. The ceiling height is 2.2m. We can place beams at 2m centers, length wise. We would like to place them 2m from the edge of the boat on both sides, so that will leave ~3.5m spacing in the center, width wise. The roof on the second level will be a simple apron with a removable canvas top. We want to use normal commercial standards for load capacity. Floor above will be wood. Below the new deck connects to steel. Again, the basic design is not a problem. Just looking for load calculations so that we can decide what size/shape/type of steel to use for support columns, support beams, spacing, etc. P...
Category: Civil & Structural       

u****ail
 [?]
Sign in to view client's details.
| u****ail
|    Cambodia
Fixed Price: Less than $500   |  Posted: 8h, 25m ago  |  Ends: 14d, 15h  |   3 Proposals
ARDUINO-BASED CUTDOWN DEVICE FOR HIGH ALTITUDE BALLOON This project would involve designing, programming, and fabricating a finished prototype, possibly using a small single-purpose Arduino processor (i.e. Micro or Nano, or something similar) to serve as a cutdown device for a high altitude balloon. Requirements: - The device needs to be as small, lightweight, and durable as possible. - The device needs to operate using an Energizer Advanced Lithium 9-volt battery as its power source. Operation: Basically, the device would be a simple timer. - Turn on the device and a small red LED begins to flash, letting the user know that the device is active. - Turning on the device starts a 60-minute countdown. At the end of the 60-minute period, the device would activate a reed relay to allow current from the 9-volt battery to flow to a user-supplied piece of nichrome wire that would heat-up and sever a small piece of braided mason lin...
Category: Contract Manufacturing       
Skills: Electrical Engineering, Electronics, Arduino       

d****ray
 [?]
Sign in to view client's details.
| d****ray
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 11h, 26m ago  |  Ends: 14d, 12h  |   0 Proposals
We have a Multi family project in Bakersfield. the building is sinking. We have an experienced contractor with a Pressed pier plan quote need an engineer to get the plans approved by the county building department for construction. I don't require structural analysis. just redo some of the drawing, county may require the plans be stamped.
Category: Civil & Structural       

n****lco
 [?]
Sign in to view client's details.
| n****lco
|    Taiwan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 22h, 3m ago  |  Ends: 89d, 1h  |   0 Proposals
We are looking for a manufacturer of aerosol paints, we require the manufacturer to produce from raw materials and supply the finished goods into our warehouse in the UK. We buy in very large volumes, please find some images attached of some of our most popular products.
Category: Contract Manufacturing       

t****est
 [?]
Sign in to view client's details.
| t****est
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 29m ago  |  Ends: 14d, 0h  |   4 Proposals
drawings will be provided by ours you have to quantify , filling qty , prepare bill of quantity (boq)..
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering       

a****rks
 [?]
Sign in to view client's details.
| a****rks
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 35m ago  |  Ends: 14d, 0h  |   0 Proposals
drawings will be provided by ours you have to quantify , filling qty , prepare bill of quantity (boq)..
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering       

a****rks
 [?]
Sign in to view client's details.
| a****rks
|    India
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 13d, 23h  |   0 Proposals
Fabric Researcher to research weavers and spinners who have the ability and skills to produce Inherent Flame Resistant Woven and Knitted Fabrics in Turkey. The applicant should be local to and live in Turkey.
Category: Contract Manufacturing       

T****ett
 [?]
Sign in to view client's details.
| T****ett
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 20, 2015  |  Ends: 1d, 17h  |   8 Proposals
Hi. We need these types of project turned around within three days. (see link below to view plans) What we are specifically looking for is an individual to "take-off" and prepare an excel spreadsheet for the following trades: Demolition - Square feet or area. Steel stud framing, non-structural - Gauge, width, length, and quantity. Drywall - Type of drywall and square feet. Paint - Square feet. Flooring - Type needed and square feet. Please provide any special requirements noted on plans as well. We typically pay $20 per project. Is this something you could do? Thanks. Best, Opi   [obscured]  /sh/vslijriybv7becu/AADnxBlKPPGukVOLcp92pQE3a?dl=0
Category: Civil & Structural       

B****INC
 [?]
Sign in to view client's details.
| B****INC
|    United States
Fixed Price: Less than $500   |  Posted: May 20, 2015  |  Ends: 13d, 7h  |   2 Proposals
Recently i purchase single family in North Hollywood,CA, 91606. We would like to get permit for 1000 addition by owners. I need somebody licence to provide document submittal list. please check attachment.
Category: Civil & Structural       

l****all
 [?]
Sign in to view client's details.
| l****all
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 20, 2015  |  Ends: 13d, 6h  |   0 Proposals
Hi, I am starting a brand new chai tea liquor. I am looking for someone that can help me to find the right manufacturer. Manufacturer, should be also able to develop the entire formula. More info and other requests in private. Thanks in advance Cristiano I.
Category: Contract Manufacturing       

I****sen
 [?]
Sign in to view client's details.
| I****sen
|    Italy
Fixed Price: $500 - $1,000   |  Posted: May 20, 2015  |  Ends: 12d, 20h  |   5 Proposals
Hi We are looking for a Revit BIM modelere having good exposure in Revit Architecture, Structure or Revit MEP for our trivandrum office.
Category: Civil & Structural       

g****mar
 [?]
Sign in to view client's details.
| g****mar
|    India
Fixed Price: Less than $500   |  Posted: May 19, 2015  |  Ends: 12d, 16h  |   0 Proposals
We are looking for a contract manufacturer in Thailand of a new health product (Do it yourself Pho Soup Kit including a condensed pho paste and the rice noodles). We are a market leader in developing natural products and have a number of market leading brand in Australia and New Zealand. Our starting point is to find a list of contract manufacturers that are already developing a similar product for other companies so we can meet and contact them. The products and companies we are interested in finding the contract manufacturer for are (in order of preference) ? Nem Viet ? Vietnemese Pho Kit -   [obscured]  /products/view/kits/vietnamese-pho ? Asian Home Gourmet Pho -   [obscured]  /our-range/spice-pastes/vietnamese-pho.php ? Hansell Soup ? Pho (or wonton soup) (Stocked in Australia and New Zealand) -   [obscured]  /#product ? Authentic Asia Soups: -   [obscured]  /our-range.htm The Job Research the following compan...
Category: Contract Manufacturing       
Skills: Market Research       
Preferred Location: Thailand

M****ses
 [?]
Sign in to view client's details.
| M****ses
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: May 19, 2015  |  Ends: 12d, 8h  |   0 Proposals
site management & organisation is key , managing site staff , dealing with clients ,recorded daily diary , ovesaing site logistics ,always thinking ahead and planning to be very motivational and give good feedback when needed to right people,to record risk assessments , and enforce the company policy's for staff to wear boots ppe ect, to be wiling to go on courses to enable the health & safety skill to advance to use your insensitive to work in a team and send emails and record charts on progress on sites , a driving licence is essential , at-least 5 years experience to be working in a active company round london we are based in croydon
Category: Contract Manufacturing       

e****y77
 [?]
Sign in to view client's details.
| e****y77
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 19, 2015  |  Ends: 12d, 6h  |   3 Proposals
I need calculations for some 2 beams using LFRD load combinations 5,6b and 8 with over strength factor. beam is supporting a discontinuous shear wall.
Category: Civil & Structural       
Skills: Structural Engineering       

D****171
 [?]
Sign in to view client's details.
| D****171
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: May 19, 2015  |  Ends: 12d, 6h  |   5 Proposals
Purpose: To help collect and filter the chatter of social media Task: Monitor discussions on LinkedIn groups for wastewater and water treatment related discussions. Deliverable: Once per week select & provide 10 best discussion threads for me to comment on. I will select 1 or 2 or 3 per week to write a response. Bonus if you can provide me with YOUR technical research and thoughts and analysis of the topic. Background: There are more than 50 wastewater related LinkedIn groups. Monitoring them all can be time consuming and I need help. I'm interested in providing value to the wastewater community and showcasing my expertise to potential clients for my consultancy services. The initial commitment will be for four (4) weeks and then consider extending.
Category: Civil & Structural       

d****330
 [?]
Sign in to view client's details.
| d****330
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: May 18, 2015  |  Ends: 11d, 14h  |   2 Proposals
Mido Dairy is a dairy production company based in Kabul. Mido Dairy has brought all its techonology from The Netherlands and seeks an experienced dairy professional to take the position of Production Manager and train the personnel.
Category: Contract Manufacturing       

m****iry
 [?]
Sign in to view client's details.
| m****iry
|    Netherlands
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 18, 2015  |  Ends: 11d, 13h  |   9 Proposals
I need to set up the sections of a building, according to wind loads and quake loads. I just need help doing this. Although I have the instructions, I need to make sure I do it right. Thank you
Category: Civil & Structural       

j****mon
 [?]
Sign in to view client's details.
| j****mon
|    United States
Fixed Price: $50 - $150   |  Posted: May 18, 2015  |  Ends: 3d, 5h  |   14 Proposals
My name is John - working for a Norwegian company delivering steel structures for all kind of buildings. We need continual help with estimates for total weight for steel to some buildings. We only have floorplans and facade drawings of the building, not any details about steel structure. We need you to: - if you miss information; do some assumptions or "reservations" - make a quick sketch for where the steel should be according to floor plans - do a "quick" calculation for the steel. This is in Norway, and might be snow load. - make an estimate for total weight of steel for this building We need good estimates - not detailed engineering I would like to work with people who could do this for less than 150$ Best regards John Steinar
Category: Civil & Structural       
Preferred Location: Western Europe, Eastern Europe

j****sso
 [?]
Sign in to view client's details.
| j****sso
|    Norway
Fixed Price: Not Sure   |  Posted: May 18, 2015  |  Ends: 10d, 17h  |   16 Proposals
Looking for a sourcing agent with experience to help an American company source different products in China. This sourcing agent will find factories, get samples, negotiate with factory, source packaging, inspect product before sent to the USA. Long term potential. Great organization and follow up skills a must.
Category: Contract Manufacturing       

m****ton
 [?]
Sign in to view client's details.
| m****ton
|    United States
Fixed Price: Not Sure   |  Posted: May 17, 2015  |  Ends: 9d, 19h  |   10 Proposals
I need a quote for a set of 4 plastic parts for a product enclosure. The part is textured on the outside. (Please specify draft) - Base - Top cover - Back cover - Front bezel. Quantity is 20000 per year Please also quote first sample for approval if charged. Please provide you best quote. Use exclusively Alibaba system. (No email) Regards serge
Category: Contract Manufacturing       

d****eip
 [?]
Sign in to view client's details.
| d****eip
|    United States
Fixed Price: Less than $500   |  Posted: May 16, 2015  |  Ends: 9d, 13h  |   1 Proposal
Longhorn SW3P as text with longhorn head (long, horizontal horns) as the logo. Black and gray or lime green and bright orange. Brooks & Dunn skull logo is one I like. This is a Texas company that designs and installs erosion control systems for large commercial projects (office buildings, hospitals, parking garages) and public highway projects and other public improvements (schools, parks, convention centers, and redevelopment projects). Customers are civil engineers and large general contractors.
Category: Civil & Structural       

b****nes
 [?]
Sign in to view client's details.
| b****nes
|    United States
Fixed Price: Not Sure   |  Posted: May 16, 2015  |  Ends: 8d, 17h  |   2 Proposals
A popular tool used by sprinters to increase air resistance while training is a parachute that trails behind them as they sprint. For familiarization purposes, attached is a picture of an existing sprint chute. Some companies offer multiple sizes, but only a few sizes at most. The goal of this project is to build a parachute with an adjustable size. This will allow the sprinter to follow the principle of progressive overload, which holds that in order to develop fitness to high levels, small incremental changes must be made over time. Size adjustments will be accomplished by adding or removing segments lined with Velcro. The size of each segment will be determined by how much drag (in pounds) we want each segment to add. Hypothetically, a good number will be approximately one pound. To get a starting point, drag will be calculated using the drag equation: D = 1/2 x Cd x rho x v^2 x A, where D is drag force, Cd is the drag coefficient, rho is the density of air, v is the sprinter spee...
Category: Contract Manufacturing       
Skills: Manufacturing Design       

p****abo
 [?]
Sign in to view client's details.
| p****abo
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 15, 2015  |  Ends: 8d, 15h  |   5 Proposals
A scale drawing is to be provided of the external side profile of a hybrid hoop/gothic arch framed greenhouse design. The anticipated tube/pipe construction will be detailed (weight, length, diameter, metal type, etc. as provided by the manufacturer. Project deliverables expected include: 1) Identification of structural stress points 2) Recommended design configuration of internal reinforcements (will require a simple sketch) to address the stress points identified in 1) above. Reinforcements may be either a specified pipe/tubing (size, length, gauge, etc.) or, when feasible, tension wire (preferred due to cost weight savings). 3) Estimation of the approximate vertical load bearing weight with the reinforcements recommended in 2) above. Factors not to be considered in this project include wind or other horizontal forces. The goal is a rough understanding of the technical feasibility of the proposed design to serve as a starting point for further consideration. Edited: Scale Dra...
Category: Civil & Structural       

O****4me
 [?]
Sign in to view client's details.
| O****4me
|    United States
Fixed Price: Not Sure   |  Posted: May 15, 2015  |  Ends: 26d, 15h  |   3 Proposals
Looking for a manufacturing company to prototype my brand sneaker. Looking for a long time partner to run the manufacturing process
Category: Contract Manufacturing       

a****313
 [?]
Sign in to view client's details.
| a****313
|    United States
Fixed Price: Not Sure   |  Posted: May 15, 2015  |  Ends: 1d, 4h  |   19 Proposals
We need a structural report and design of a steel structure (single storey). The model and design has to be done with SAP2000 and according the latest Eurocodes: especially EN1993 We need the sdb-file and the structural report as a pdf-file. The foundation is not part of this Job! Also the appartement and office building is not scope of this job. It┤s the same with the arch gate. We will provide: - 3d-CAD-files - Load assumptions - Some information about the sections which can be used - Structural system The Report has to include the design Parameters of the Eurocode. We need an editable Word-file with the entire report and overview drawings of the steel structure for translation: Planview of the roof members Planview of columns All elevation views of the outer and inner walls including bracings Section views Main joint-details Here also the finished files has to be editable (e.g. dwg). The drawing has to be sent as 3D-file and also as revit-structure-file. Attached the archi...
Category: Civil & Structural       
Skills: AutoCAD, Structural Analysis, AutoDesk Revit       

W****lci
 [?]
Sign in to view client's details.
| W****lci
|    Germany
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job