Save this Search
     
Sort by:
  • Posted Date
Hourly
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 2h, 0m ago  |  Ends: 14d, 21h  |   3 Proposals
I have a new magic idea, and i need a tech engineer that collaborate to create the new revolutionary Ring that vibrate and have a LED for notifications. and bluetooth The item price should be very cheap, and accessible to all ages I will give you all details and discuss about the price. This is the next big thing
Category: Mechanical       

V****ato
 [?]
Sign in to view client's details.
| V****ato
|    Italy
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: May 21, 2015  |  Ends: 13d, 19h  |   4 Proposals
Design of Thermal system Stoecker edition 3 comprehensive problem A-10 optimum gas pipeline and pumping facility where work can be recovered at destination ......
Category: Mechanical       
Skills: SolidWorks, Mechanical Engineering       

m****ary
 [?]
Sign in to view client's details.
| m****ary
|    Pakistan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 13d, 17h  |   4 Proposals
drawings will be provided by ours you have to quantify , filling qty , prepare bill of quantity (boq)..
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering       

a****rks
 [?]
Sign in to view client's details.
| a****rks
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 13d, 17h  |   0 Proposals
drawings will be provided by ours you have to quantify , filling qty , prepare bill of quantity (boq)..
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering       

a****rks
 [?]
Sign in to view client's details.
| a****rks
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 20, 2015  |  Ends: 1d, 10h  |   8 Proposals
Hi. We need these types of project turned around within three days. (see link below to view plans) What we are specifically looking for is an individual to "take-off" and prepare an excel spreadsheet for the following trades: Demolition - Square feet or area. Steel stud framing, non-structural - Gauge, width, length, and quantity. Drywall - Type of drywall and square feet. Paint - Square feet. Flooring - Type needed and square feet. Please provide any special requirements noted on plans as well. We typically pay $20 per project. Is this something you could do? Thanks. Best, Opi   [obscured]  /sh/vslijriybv7becu/AADnxBlKPPGukVOLcp92pQE3a?dl=0
Category: Civil & Structural       

B****INC
 [?]
Sign in to view client's details.
| B****INC
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 3-4 weeks  |  Posted: May 20, 2015  |  Ends: 12d, 22h  |   3 Proposals
This unit will be included in a hydrogen on demand system. Initial design ideas to field test a small number of units. later refine as required to go into production.
Category: Mechanical       

P****s08
 [?]
Sign in to view client's details.
| P****s08
|    Canada
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: May 19, 2015  |  Ends: 4h, 59m  |   5 Proposals
Looking for individual expert who can solve the issues I have while using Autodesk CFD Simulation / Flow Design / Nastran and related software along with use case / real examples. I do have few models I created in Inventor and I'd like to analyse them in CFD, but I'm having difficulty running or understanding them correctly. You must be familiar with advanced concepts in Fluid Mechanics / Aerodynamics / Hydro-static pressure etc. This is not so so use case I'm talking, this might be the toughest simulation, you might have thought till date. Let me know your compensation. We can share the Desktop on Skype or Teamviewer. This should not take more that few hours. I may have couple of projects I can outsource very soon, but that is not part of this Job.
Category: Mechanical       

i****tro
 [?]
Sign in to view client's details.
| i****tro
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 19, 2015  |  Ends: 11d, 23h  |   3 Proposals
I need calculations for some 2 beams using LFRD load combinations 5,6b and 8 with over strength factor. beam is supporting a discontinuous shear wall.
Category: Civil & Structural       
Skills: Structural Engineering       

D****171
 [?]
Sign in to view client's details.
| D****171
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: May 19, 2015  |  Ends: 11d, 23h  |   5 Proposals
Purpose: To help collect and filter the chatter of social media Task: Monitor discussions on LinkedIn groups for wastewater and water treatment related discussions. Deliverable: Once per week select & provide 10 best discussion threads for me to comment on. I will select 1 or 2 or 3 per week to write a response. Bonus if you can provide me with YOUR technical research and thoughts and analysis of the topic. Background: There are more than 50 wastewater related LinkedIn groups. Monitoring them all can be time consuming and I need help. I'm interested in providing value to the wastewater community and showcasing my expertise to potential clients for my consultancy services. The initial commitment will be for four (4) weeks and then consider extending.
Category: Civil & Structural       

d****330
 [?]
Sign in to view client's details.
| d****330
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 18, 2015  |  Ends: 11d, 6h  |   9 Proposals
I need to set up the sections of a building, according to wind loads and quake loads. I just need help doing this. Although I have the instructions, I need to make sure I do it right. Thank you
Category: Civil & Structural       

j****mon
 [?]
Sign in to view client's details.
| j****mon
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: May 18, 2015  |  Ends: 11d, 0h  |   66 Proposals
We are looking for a Mechanical Design Engineers preferably experienced in manufacturing industry. Due to work overload of our design engineers we are forced to seek outsourced services. I case of a satisfactory cooperation we provide a possibility for constant job provision. Expert knowledge of 3D CAD software (preffered SolidWorks or CATIA) is required. Solid understanding of design for manufacturing is welcomed. Enclosed you'll find our company presentation. When responding to this post please include images of your work. Start date a.s.a.p.
Category: Mechanical       

k****ech
 [?]
Sign in to view client's details.
| k****ech
|    Slovak Republic
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 15, 2015  |  Ends: 8d, 9h  |   5 Proposals
A scale drawing is to be provided of the external side profile of a hybrid hoop/gothic arch framed greenhouse design. The anticipated tube/pipe construction will be detailed (weight, length, diameter, metal type, etc. as provided by the manufacturer. Project deliverables expected include: 1) Identification of structural stress points 2) Recommended design configuration of internal reinforcements (will require a simple sketch) to address the stress points identified in 1) above. Reinforcements may be either a specified pipe/tubing (size, length, gauge, etc.) or, when feasible, tension wire (preferred due to cost weight savings). 3) Estimation of the approximate vertical load bearing weight with the reinforcements recommended in 2) above. Factors not to be considered in this project include wind or other horizontal forces. The goal is a rough understanding of the technical feasibility of the proposed design to serve as a starting point for further consideration. Edited: Scale Dra...
Category: Civil & Structural       

O****4me
 [?]
Sign in to view client's details.
| O****4me
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 81d, 22h  |   9 Proposals
Structural Design Engineer High Rise Buildings, Villas,Schools Code ACI, BS, UBC. Seismic And Wind Analysis
Category: Civil & Structural       

E****leh
 [?]
Sign in to view client's details.
| E****leh
|    United Arab Emirates
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 14, 2015  |  Ends: 6d, 20h  |   8 Proposals
Need assistance determining best material and manufacturing method for novel fish hook. It is a relatively simple design, but so far I have been unable to identify an inexpensive manufacturing method. Traditional wire forming does not seem well suited for this design and DMLS and 3D printing are too expensive.
Category: Mechanical       
Preferred Location: United States

m****ges
 [?]
Sign in to view client's details.
| m****ges
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 12, 2015  |  Ends: 5d, 2h  |   5 Proposals
I have a CAD drawing for a cabinet that is being cut on a CNC machine from a 4ft x 8ft .75 inch piece of MDF. I need to revise the size of some parts on the sheet in CAD, redraw the toolpaths in Mastercam, and create an .NC file for the machine to cut the parts. I have the .NC, CAD, and Mastercam Files for the old file, to show the toolpaths, and the CAD file of the new measurements. Just take the paths from the file 'SU 22IN MONITOR 9-19-12.mcx and redraw them for the parts in the SU 22in uprightslim side 5-4-15.mcx, then make a new .NC file for my CNC machine. It will be on the same machine with the same bits.
Category: Mechanical       
Skills: 3D Modeling, AutoCAD, Mastercam, CAD/AutoCAD       

z****son
 [?]
Sign in to view client's details.
| z****son
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: May 12, 2015  |  Ends: 5d, 0h  |   17 Proposals
Custom designed case for a iPhone/Android tablet or a phone. Required design in proprietary custom connections to be fitted into custom (existing) charging station.
Category: Mechanical       
Preferred Location: North America, Western Europe, Eastern Europe

j****mov
 [?]
Sign in to view client's details.
| j****mov
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 09, 2015  |  Ends: 1d, 14h  |   3 Proposals
Hi, I'm looking to build a dog water treadmill with someone. I or you will fly out and we will build it together.   [obscured]  /watch?v=dq6AEnQwVrw is what I want. I would like to know how long you think I'd take to build and your bid for the project.
Category: Civil & Structural       
Skills: Mechanical Engineering       

J****116
 [?]
Sign in to view client's details.
| J****116
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 09, 2015  |  Ends: 1d, 12h  |   3 Proposals
I need someone to make me a powder-based 3D printer or sell me one. I am opening a 3D printing store and i would like to sell powder printers
Category: Mechanical       

j****013
 [?]
Sign in to view client's details.
| j****013 *
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: May 08, 2015  |  Ends: 75d, 23h  |   0 Proposals
Respected Sir, I am Mohammed Arshad Ali Mechanical Engineer with 5 years of experience Looking for job. Currently on Visit visa. Please see my attached file for my resume. Looking forward for a favorable response. Thanking you in Anticipation Yours truly Arshad
Category: Mechanical       

a****087
 [?]
Sign in to view client's details.
| a****087
|    United Arab Emirates
Hourly Rate: Less than $10 / hr   |  Duration: 3-4 weeks  |  Posted: May 08, 2015  |  Ends: 17h, 3m  |   16 Proposals
A 3D model of a diamond drill exploration rig has been developed and now needs to be taken to the final step detailing the powerpac and hydraulic system. This involves drawing the diesel engine, hydraulic pumps and control console. After several months on this project our designer has moved on to other projects. Please quote an hourly rate and also how many hours per week you can work.
Category: Mechanical       
Skills: 3D, SolidWorks, 3D Design       
Preferred Location: India/Southern Asia, Eastern Asia

r****bur
 [?]
Sign in to view client's details.
| r****bur
|    Philippines
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 15h, 27m  |   19 Proposals
We provide Construction Measurement services to main contractors in the UK construction industry currently outsource over 20 000 hours of work a year. We are looking for both individuals and consultants who we can work with and train to assist us in this work. New projects will be starting in the next few weeks. The attached bid documentation sets out our requirements and the application forms that will require completion. When bidding, please note that we: ? provide and fund the training ? provide all the specialist software ? are looking to develop long term relationships and provide ongoing work ? require candidates with excellent written and oral English language skills ? cannot consider quotes that do not include an indicative hourly rate ? Candidates should be studying at or have achieved first class degree level skills Candidates should read the attached document before submitting a quotation. We are especially interested to hear from candidates with knowledge of a speci...
Category: Civil & Structural       
Skills: 3D, Civil Engineering, English, Construction       
Preferred Location: Eastern Europe

T****ANE
 [?]
Sign in to view client's details.
| T****ANE
|    United Kingdom
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 15h, 25m  |   21 Proposals
We provide CAD/ building measurement services to main contractors in the UK construction industry and we are looking for both individuals and companies who we will train to assist us in this work. Projects will start in the next few weeks. The attached bid documentation sets out our requirements and the application forms that will require completion. When bidding, please note: ? We provide and fund the training ? We provide all the specialist software ? We require candidates with excellent written and oral English language skills ? We are looking to develop long term relationships and provide ongoing work ? We currently outsource over 25,000 hours of work a year ? Candidates should be studying at or have achieved first class degree level skills ? We cannot consider quotes that don't include an indicative hourly rate Candidates should read the attached document before submitting a quotation. We are especially interested to hear from self employed candidates with knowledge of a ...
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering       
Preferred Location: Eastern Europe

T****ANE
 [?]
Sign in to view client's details.
| T****ANE
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 15h, 19m  |   21 Proposals
We provide Construction Measurement services to main contractors in the UK construction industry currently outsource over 20 000 hours of work a year. We are looking for both individuals and consultants who we can work with and train to assist us in this work. New projects will be starting in the next few weeks. The attached bid documentation sets out our requirements and the application forms that will require completion. When bidding, please note that we: ? provide and fund the training ? provide all the specialist software ? are looking to develop long term relationships and provide ongoing work ? require candidates with excellent written and oral English language skills ? cannot consider quotes that do not include an indicative hourly rate ? Candidates should be studying at or have achieved first class degree level skills Candidates should read the attached document before submitting a quotation. We are especially interested to hear from self employed candidates with knowle...
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering       
Preferred Location: Eastern Europe

T****ANE
 [?]
Sign in to view client's details.
| T****ANE
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: Feb 12, 2015  |  Ends: 8d, 12h  |   12 Proposals
Looking for an expert with working experience in Comsol Multiphysics to do Finite Element Analysis task mainly in the field of FSI (Fluid Structure Interaction) problem. First has to prove expertise by giving a demo model provided by me. Details can be discussed on chat room.
Category: Mechanical       
Skills: COMSOL Multiphysics       

m****d90
 [?]
Sign in to view client's details.
| m****d90
|    Germany
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job