Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 7 days
Fixed Price: Less than $500   |  Posted: May 29, 2015  |  Ends: 1d, 16h  |   7 Proposals
We need a structural report and design of a structure (roof + facade) The model and design has to be done with SAP2000 and according the latest Eurocodes: We need the sdb-file and the structural report as a pdf-file. The foundation is not part of this Job! Just the skeleton of the glas-roof and glas-facade. We will provide: - 3d-CAD-files - Load assumptions (Dead, Wind, Snow) - Some information about the sections which can be used (only rectangual sections) - Structural system information The Report has to include the design Parameters of the Eurocode. We need an editable Word-file with the entire report and overview drawings of the steel structure for translation: Attached the architectural drawings for a first overview.
Category: Civil & Structural       
Skills: AutoCAD, Structural Analysis, AutoDesk Revit       

W****lci
 [?]
Sign in to view client's details.
| W****lci
|    Germany
Fixed Price: About $20   |  Posted: May 27, 2015  |  Ends: 3d, 17h  |   4 Proposals
Hi. We would like this project to be completed by June 1st. Please provide a 'take-off' and prepare an excel spreadsheet for the following trades: Steel stud framing, non-structural - Gauge, width, length, and quantity. Drywall - Type of drywall and square feet. Paint - Square feet, doors quantity. Flooring - Type needed and square feet. Please ensure that the commas are replaced with periods in the excel spreadsheet as requested. Please provide any special requirements noted on plans as well. Again, this project is $20 flat fee per job. Thanks. Best, Opi   [obscured]  /s/0yqv3nhbp4pywx3/Walmart%20Plans.zip?dl=0
Category: Civil & Structural       

B****INC
 [?]
Sign in to view client's details.
| B****INC
|    United States
Fixed Price: Less than $500   |  Posted: May 22, 2015  |  Ends: 6d, 8h  |   11 Proposals
We have a basic plan for adding a second level to an existing ferry boat. We aren't looking for design help. We just need to know what size and type of steel beams we should be using to minimize weight, and maximize space. The footings are not a problem, they are stable. The size of the space is 21 meters long, 7.5 wide on one end, and 6.5 meters wide on the other, with an almost constant taper. The ceiling height is 2.2m. We can place beams at 2m centers, length wise. We would like to place them 2m from the edge of the boat on both sides, so that will leave ~3.5m spacing in the center, width wise. The roof on the second level will be a simple apron with a removable canvas top. We want to use normal commercial standards for load capacity. Floor above will be wood. Below the new deck connects to steel. Again, the basic design is not a problem. Just looking for load calculations so that we can decide what size/shape/type of steel to use for support columns, support beams, spacing, etc. P...
Category: Civil & Structural       

u****ail
 [?]
Sign in to view client's details.
| u****ail
|    Cambodia
Fixed Price: $1,000 - $5,000   |  Posted: May 21, 2015  |  Ends: 6d, 3h  |   2 Proposals
We have a Multi family project in Bakersfield. the building is sinking. We have an experienced contractor with a Pressed pier plan quote need an engineer to get the plans approved by the county building department for construction. I don't require structural analysis. just redo some of the drawing, county may require the plans be stamped.
Category: Civil & Structural       

n****lco
 [?]
Sign in to view client's details.
| n****lco
|    Taiwan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 5d, 15h  |   8 Proposals
drawings will be provided by ours you have to quantify , filling qty , prepare bill of quantity (boq)..
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering       

a****rks
 [?]
Sign in to view client's details.
| a****rks
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 5d, 15h  |   1 Proposal
drawings will be provided by ours you have to quantify , filling qty , prepare bill of quantity (boq)..
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering       

a****rks
 [?]
Sign in to view client's details.
| a****rks
|    India
Fixed Price: Less than $500   |  Posted: May 20, 2015  |  Ends: 4d, 22h  |   4 Proposals
Recently i purchase single family in North Hollywood,CA, 91606. We would like to get permit for 1000 addition by owners. I need somebody licence to provide document submittal list. please check attachment.
Category: Civil & Structural       

l****all
 [?]
Sign in to view client's details.
| l****all
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 20, 2015  |  Ends: 4d, 11h  |   8 Proposals
Hi We are looking for a Revit BIM modelere having good exposure in Revit Architecture, Structure or Revit MEP for our trivandrum office.
Category: Civil & Structural       

g****mar
 [?]
Sign in to view client's details.
| g****mar
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 19, 2015  |  Ends: 3d, 21h  |   4 Proposals
I need calculations for some 2 beams using LFRD load combinations 5,6b and 8 with over strength factor. beam is supporting a discontinuous shear wall.
Category: Civil & Structural       
Skills: Structural Engineering       

D****171
 [?]
Sign in to view client's details.
| D****171
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: May 19, 2015  |  Ends: 3d, 21h  |   5 Proposals
Purpose: To help collect and filter the chatter of social media Task: Monitor discussions on LinkedIn groups for wastewater and water treatment related discussions. Deliverable: Once per week select & provide 10 best discussion threads for me to comment on. I will select 1 or 2 or 3 per week to write a response. Bonus if you can provide me with YOUR technical research and thoughts and analysis of the topic. Background: There are more than 50 wastewater related LinkedIn groups. Monitoring them all can be time consuming and I need help. I'm interested in providing value to the wastewater community and showcasing my expertise to potential clients for my consultancy services. The initial commitment will be for four (4) weeks and then consider extending.
Category: Civil & Structural       

d****330
 [?]
Sign in to view client's details.
| d****330
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 18, 2015  |  Ends: 3d, 4h  |   10 Proposals
I need to set up the sections of a building, according to wind loads and quake loads. I just need help doing this. Although I have the instructions, I need to make sure I do it right. Thank you
Category: Civil & Structural       

j****mon
 [?]
Sign in to view client's details.
| j****mon
|    United States
Fixed Price: Less than $500   |  Posted: May 16, 2015  |  Ends: 1d, 4h  |   1 Proposal
Longhorn SW3P as text with longhorn head (long, horizontal horns) as the logo. Black and gray or lime green and bright orange. Brooks & Dunn skull logo is one I like. This is a Texas company that designs and installs erosion control systems for large commercial projects (office buildings, hospitals, parking garages) and public highway projects and other public improvements (schools, parks, convention centers, and redevelopment projects). Customers are civil engineers and large general contractors.
Category: Civil & Structural       

b****nes
 [?]
Sign in to view client's details.
| b****nes
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 15, 2015  |  Ends: 6h, 46m  |   6 Proposals
A scale drawing is to be provided of the external side profile of a hybrid hoop/gothic arch framed greenhouse design. The anticipated tube/pipe construction will be detailed (weight, length, diameter, metal type, etc. as provided by the manufacturer. Project deliverables expected include: 1) Identification of structural stress points 2) Recommended design configuration of internal reinforcements (will require a simple sketch) to address the stress points identified in 1) above. Reinforcements may be either a specified pipe/tubing (size, length, gauge, etc.) or, when feasible, tension wire (preferred due to cost weight savings). 3) Estimation of the approximate vertical load bearing weight with the reinforcements recommended in 2) above. Factors not to be considered in this project include wind or other horizontal forces. The goal is a rough understanding of the technical feasibility of the proposed design to serve as a starting point for further consideration. Edited: Scale Dra...
Category: Civil & Structural       

O****4me
 [?]
Sign in to view client's details.
| O****4me
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job