Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 1h, 20m ago  |  Ends: 14d, 22h  |   0 Proposals
I have a roadway and approaches that is already designed. There are changes that need to be made to the design and I need a 3d surface built of the entire project (about 5.5 miles). Most of the project changes have already been designed in civil 3d, just need the intersections built and the approach roads. I have horizontal and vertical alignments already ready to go in an xml file. I need this done asap.
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering, Civil 3d       

c****s12
 [?]
Sign in to view client's details.
| c****s12
|    United States
Fixed Price: More than $10,000   |  Posted: 3h, 14m ago  |  Ends: 14d, 20h  |   2 Proposals
Looking for an expert in industrial level structured cabling design for a very large project. You will need to demonstrate a capability to envisage, design and develop the plans for the structured cabling installation and guided through to implementation.
Category: Civil & Structural       

g****inc
 [?]
Sign in to view client's details.
| g****inc
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 10, 2014  |  Ends: 13d, 18h  |   1 Proposal
Utilizing standard estimate computer software including (HeavyBid/HeavyJob, Agtek, Excel) ┐ Interface and build relationships with subcontractors, suppliers, owners and engineers ┐ Assist in Project Bid Selection ┐ Review and evaluate subcontractors scope ┐ Perform buyout process for subcontractors and suppliers ┐ Interpret detailed plans and specifications in regards to scope and phasing ┐ Organization of assigned project files and general organization ┐ Responsible for all assigned project related correspondence, scheduling, meetings, ect. ┐ Assigned project billing, costing, and accounting. ┐ Any other tasks assigned by management
Category: Civil & Structural       
Skills: Civil Engineering, Project Management       

n****ega
 [?]
Sign in to view client's details.
| n****ega
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Jul 10, 2014  |  Ends: 13d, 13h  |   5 Proposals
I require drainage and road as constructed information to be converted from dwg format to the following ASPEC GIS standard   [obscured]  -specstandards.com.au/
Category: Civil & Structural       
Skills: Geographic Information Systems, ArcGIS       

V****eys
 [?]
Sign in to view client's details.
| V****eys
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 10, 2014  |  Ends: 5d, 13h  |   5 Proposals
Need a professional writer to assist with preparing a Request For Proposal package. The project scope is construction management services for a building construction. Previous related experience is a must. Thank you.
Category: Civil & Structural       

p****fic
 [?]
Sign in to view client's details.
| p****fic
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jul 09, 2014  |  Ends: 12d, 21h  |   2 Proposals
Need surveyor / civil engineer familiar with parking lot requirements and managing MSD (Metropolitan Sewer District) and City of Ballwin projects to complete site plan for review and approvals. Scope will include drawing topography, proposed parking area, and drainage calcs and completing revisions according to review authority. Engineer seal required. Site is .9acre parking for at least 8-10cars. May require local site visit Ballwin, MO
Category: Civil & Structural       

h****t72
 [?]
Sign in to view client's details.
| h****t72
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 09, 2014  |  Ends: 12d, 9h  |   9 Proposals
We have a number of discrete civil packages that we require quantity take-offs for. Then we need to compare them to our tender design quantities. We need qtys for all elements on the drawings for (incl. but not limited to): - earthworks - drainage - pavements - kerbs - linemarking - signs - other road furniture - footpaths - lighting & CCTV - conduits - landscaping You would need to provide evidence to support your workings. Do you have an example of a similar project that you have worked on? Can you do this work? When could you start? What is your rate? I can provide full set of drawings on request if this helps your to quote for the work.
Category: Civil & Structural       

P****CCS
 [?]
Sign in to view client's details.
| P****CCS
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jul 08, 2014  |  Ends: 12d, 3h  |   6 Proposals
I am in search for structural designers who are familiar with the following: - Timber structural design concepts - Wood-framed residential building (Type V) - California Building Code 2013 (CBC 2013) - Auto CAD - Enercalc - Proficient in English I am looking for help my overloaded structural works and need someone who is able to provide engineering design and calculation for residential structure per CBC 2013. Most of these projects are ranging from 2000 sq.ft. to 6000 sq.ft. of residential homes, and some room addition projects. Please provide your hourly rate and estimate lump sum fee for sample project attached herewith.
Category: Civil & Structural       

W****ile
 [?]
Sign in to view client's details.
| W****ile
|    United States
Fixed Price: Less than $500   |  Posted: Jul 08, 2014  |  Ends: 11d, 23h  |   9 Proposals
Design for reinforced concrete slab-on-grade. Requirements Require structural design complete with calculations and AutoCAD drawing for: 1. frost protected shallow-foundation (FPSF) slab/rebar design, with specification for type and compaction of granular sub-base 2. foundation wall design, including design for lateral loads 3. Design of 6" retaining walls, 5' high General Description 3 storey house. The bottom storey is partially underground and will house a two-car garage as well as a conditioned basement. The 2nd and upper storey are clear span, supported by the outer walls. No columns or intermediate bearing walls. See attached drawings and isometric. Slabs Two slabs required 1. garage 2. basement both slabs are insulated monolithic frost protected shallow-foundation (FPSF) ? 6" (150mm) rigid EPS foam under slab and at slab edges to protect against frost ? no footings ? slab sits on 6" EPS rigid foam and granular sub-base ? slabs are separated by rigid ...
Category: Civil & Structural       
Preferred Location: North America, Eastern Europe, Australia/Oceania

r****ney
 [?]
Sign in to view client's details.
| r****ney
|    Canada
Fixed Price: $20 - $60   |  Posted: Jul 07, 2014  |  Ends: 10d, 17h  |   12 Proposals
1. I have a house floor plan which I have made many changes to and I want you to do a new fresh plan with my changes I need done to the plan. 2.Once that's been done I need the interior of the house done such as walls ,kitchen, bathrooms, floors, doors and windows I want which I have images of. So its a walk through 3. Than after that I want you to make changes to the house design front of the house on the house image that I have. Add porch and deck and windows and doors to the front of the house that I have and green tropical plants where I marked the garden on the plan. and add in some images I have. 4. After the front has been done I will need the image for the back of the house to have some changes made. I have a image that needs changes made too. Please only apply for this if you have done this type of work heaps and can do house plans and design inside and out of house.
Category: Civil & Structural       

N****you
 [?]
Sign in to view client's details.
| N****you
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 07, 2014  |  Ends: 10d, 10h  |   1 Proposal
I have 13 years experience in auto cad drafting. 5 years in gcc countries i did this kind of jobs precast structure,swimming pool, civil structural,architectural drawings
Category: Civil & Structural       
Skills: AutoCAD, AutoDesk Revit       

s****oor
 [?]
Sign in to view client's details.
| s****oor
|    United Arab Emirates
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 06, 2014  |  Ends: 9d, 12h  |   8 Proposals
Hi, I need a civil engineer or similar technologist to help me formulate low cost, lightweight concrete mixes using various components which might be available around the world. I am not a civil engineer, so the person will need to provide some feasibility advice too. After the formulation of the concrete, I am hoping the successful freelancer can help me document production, quality assurance and inspection processes. Please provide resume and describe relevant experience in your response. Thanks Ben
Category: Civil & Structural       

b****row
 [?]
Sign in to view client's details.
| b****row
|    Australia
Fixed Price: Not Sure   |  Posted: Jul 04, 2014  |  Ends: 8d, 0h  |   4 Proposals
We are looking for an engineer who is located in New York who has lots of experience in designing structural plans, underpinning, sheeting and shoring plans and more. You also must be able to cost out a job as it relates to that plan. We are looking for some who can design, who can create a real budget and then who can put the components together to get the job done. You must be able to cost out the work. Moonlighting is fine.
Category: Civil & Structural       
Skills: ANSYS, AutoCAD, Civil Engineering       

V****345
 [?]
Sign in to view client's details.
| V****345 *
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 03, 2014  |  Ends: 6d, 21h  |   22 Proposals
Provide full set of detailed fabrication drawings for a small structural steel structure. Details to include OSHA compliant design of hand rails and OSHA compliant design of stairways. Full fabrication details for clips, hardware takeoff, cutsheet and BOM. Design constraints will be based on engineered members and dimensions being provided. Drawing number 50067_07_20_0 shows the elevation of the structure and gives an overview of what is required. Autocad Drawings are available for for use if needed.
Category: Civil & Structural       

z****ems
 [?]
Sign in to view client's details.
| z****ems
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 02, 2014  |  Ends: 5d, 18h  |   2 Proposals
Assist company in the creation of schedules, bids, take-offs, for construction jobs and training. Design, engineering or steels repair details used in the rehabilitation of high rise buildings.
Category: Civil & Structural       
Skills: ANSYS, Architecture, AutoCAD, Civil Engineering       

a****012
 [?]
Sign in to view client's details.
| a****012
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Jun 27, 2014  |  Ends: 1d, 5h  |   2 Proposals
Familiar with the following installation work and working on railway platform. 1. Electrical Installation 2. Cable Support Installation - GI Conduit 3. Data Cat 6 Installation 4. Mounting of IP Camera and Wireless Antenna 5. Mounting of Wireless AP
Category: Civil & Structural       

y****ong
 [?]
Sign in to view client's details.
| y****ong
|    Singapore
Fixed Price: Not Sure   |  Posted: Jun 26, 2014  |  Ends: 45d, 5h  |   12 Proposals
Hi, we have created a certain number of new profiles we want to use for certain constructional purposes. We have chosen material, adjusted the characteristics of material we will be using (special timber species), extruded it into profile sections, created the bolted connection and now we need to test these profiles agains loads (wind loads for member and weight loads for corner connection). A more specific scope of works: 1. Which loads have to be tested: a. Corner connection (we have the assembly of it ready in inventor) is subject to 150 kg load on the corner. It has to be tested whether corner will break or not if this load is applied. Here is a link of similar test:   [obscured]  /en/products/test-engineering/ks-corner-testing-apparatus.html b. Deflection rate of the sample. Apply loads to the sample (we will provide actual assembly drawings of the sample of required dimensions in Inventor (2011 version)). Apply loads one by one going with higher loads every time ...
Category: Civil & Structural       

b****ows
 [?]
Sign in to view client's details.
| b****ows
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 24, 2014  |  Ends: 6d, 5h  |   3 Proposals
My company undertakes a range of activities for civil construction companies. We do a lot of tenders for small civil jobs and for form / reo / pour type jobs. Sometimes the work involves qty take offs, and always involves compiling an estimate from first principles, R&O, overheads etc. We have a template spreadsheet that we use with a set of productivities. Would you be in a position to assist on tenders on an ad-hoc basis? Have you had experience in construction of concrete elements (including formwork and reo fixing?) Your workload could be 20 hours a month depending on the number of projects we are tendering. What would your rate be?
Category: Civil & Structural       
Skills: Civil Engineering, quantity takeoff       
Preferred Location: Australia/Oceania

P****CCS
 [?]
Sign in to view client's details.
| P****CCS
|    Australia
Fixed Price: Not Sure   |  Posted: Jun 23, 2014  |  Ends: 11d, 19h  |   11 Proposals
CIVIL CAD Design Job Description: A Civil CAD Design/Drafter with AutoCAD Civil 3D capabilities and experience for survey and civil/infrastructure design projects. The candidate will provide drafting and design support for Project Mangers, Surveyors and Design Engineers. Job Duties: 1) Prepare survey and engineering drawings consisting of layouts, arrangements and flow sheets from field data, sketches, existing utility mapping and verbal and written instructions from general engineering and survey information. 2) Make revisions based on redline changes and to verify quantities. 3) Set up and maintain standard drawing files in accordance with company drafting standards as applicable to each project 4) Types of projects range from municipal infrastructure such as building and facility sites, roadways, and streetscapes, to residential and commercial developments in urban and sub-urban areas. Requirements: 1) Proficient in AutoCAD Civil 3D CAD drafting and the latest AutoCAD software 2...
Category: Civil & Structural       
Skills: AutoCAD Civil 3D       

e****hcg
 [?]
Sign in to view client's details.
| e****hcg
|    United States
Fixed Price: $800 - $2,000   |  Posted: Jun 13, 2014  |  Ends: 1d, 11h  |   20 Proposals
We need the reinforcement drawing for one floor slab including the waiting bars for upper walls Attached you will find the entire documents regarding these slabs: - P01 Overview of formwork of the slab - Planlieferliste: List of required drawings (this is also the scope of this job) - sample reinforcement drawings as reference for the drawing standard - ▄bersicht Abschnitte: construction steps The entire slab will be reinforced with bars. The concrete is water-resistant and impermeable. The crack width limitation is 0.1mm. We will deliver the structural calculation later with all information of the reinforcement. We need PDF, DWG and (if possible) as Nemetschek-files of the drawings and also the rebar list. IMPORTANT: In the file Planlieferliste you will find the calendar week of delivery (KW in german). If there could be a problem with these deadlines, do not apply for this job. The drawings can be done 2D or 3D. We suppose 18 drawings. The file names are also included in the Pl...
Category: Civil & Structural       

W****lci
 [?]
Sign in to view client's details.
| W****lci
|    Germany
Fixed Price: $500 - $1,000   |  Posted: Jun 11, 2014  |  Ends: 30d, 2h  |   9 Proposals
Develop FE model of four bridge structures based on current bridge drawings and a moving load (simple). Additionally, verify the accuracy of the simulated models. Give tutoring sessions on LS-DYNA ( If present in the Washington DC area).
Category: Civil & Structural       
Preferred Location: United States

U****064
 [?]
Sign in to view client's details.
| U****064
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 08, 2014  |  Ends: 56d, 12h  |   14 Proposals
Nile Valley Consultancy (NVC) is growing Consultant group, offers engineering consultation services. Group of youth engineers established NVC; this group has good experiences through work in different engineering companies and consultants groups. NVC team improves their experiences with all up-to-date design techniques and construction technologies. The team consists of hard worker engineers exerting their effort efficiently to finalize their tasks professionally. Our target is Accuracy, professionally, optimized Design and client satisfaction.
Category: Civil & Structural       

E****zzz
 [?]
Sign in to view client's details.
| E****zzz
|    Egypt
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Jun 08, 2014  |  Ends: 26d, 12h  |   0 Proposals
Mark up and measure lineal meters and square meters of Structural steel and email the marked up drawings back to me including detailed quantities To locate all electrical/mechanical/service penetrations in fire walls/barrier and floors or partitions in commercial buildings retro and new Marked all penetrations in colour on drawings and supply me with the marked up drawings and quantities for each level of the building recorded in an excel spreadsheet We will supply you with all drawings from which you will get the quantities? Please supply me with an example of similar work you have done.
Category: Civil & Structural       

A****lly
 [?]
Sign in to view client's details.
| A****lly
|    Australia
Fixed Price: Not Sure   |  Posted: Jun 06, 2014  |  Ends: 9d, 15h  |   5 Proposals
Looking for Technical Partner, Construction Manager for proposed mixed use real estate development project. Proposed Scale of project is 500 to 2000 predominantly residential units on 20 up to 40 hectares of Land. Joint Venture proposals also welcome.
Category: Civil & Structural       
Preferred Location: United Kingdom

a****for
 [?]
Sign in to view client's details.
| a****for
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job