Save this Search
     

All JobsEngineering & Manufacturing

 568 results  
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14 minutes ago  |  Ends: 89d, 23h  |   0 Proposals
We are a small architecture and design company located in Fort Lauderdale, FL. We need a person able to develop a full project of a contemporary house to be built in Fort Lauderdale or Miami area. ______________________________________________________________ Technical specifications: House is: 3 story, 2500 sq feet = 240 sq meters (A/C area) Has to be designed in: contemporary, modern, futuristic style with clean lines, warm vibrant colors, and minimalist concept. Land area is: 5500 sq feet = 500 sq meters located on a paved road with public utilities available (sewer, electricity, water). Terrain is: mostly compact sand, flat area, elevation is 5-10 meters above sea level Approximate GPS location is: 26N and 80W Building orientation: (to be decided yet) Weather is: Tropical humid, maritime influence (salt spray), heavy rainfall, subject to hurricanes Category 1 to 5 hurricanes. Very strong solar radiation. 4 bedrooms + 3 bathrooms (3 bedrooms with 3 en-suite bathrooms) 2 car...
Category: Architecture       
Skills: 3ds Max, ArchiCAD, Architecture, V-Ray, 3D Rendering       

a****tez
 [?]
Sign in to view client's details.
| a****tez
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 28 minutes ago  |  Ends: 25d, 18h  |   5 Proposals
I need a Quality engineer based in shenzhen or Singapore to support the following activities: - Oversee moulding tool trial at our China supplier - Make sure all parts are in spec - Complete QA checks on all parts and sub assemblies - Measurement reports - Liaise with client You must have the following skills: - 2 years+ in working in quality or supply chain - experience working with tooling for plastics, metal stamped parts, adhesives & gaskets - Implementing QA processes into suppliers - Speak Mandarin & Good English (read & write)
Category: Mechanical       
Skills: Mechanical Engineering       

a****yed
 [?]
Sign in to view client's details.
| a****yed *
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 43m ago  |  Ends: 14d, 22h  |   1 Proposal
It's a basic C program that some of the parts have already been given but basically I need C code that would autocomplete words using an array. I have all the details for anyone interested in a quick weekend job for quick money. Its mildly in depth in instructions so I wasn't going to simply copy the whole thing over.
Category: Other - Engineering &...       
Skills: C       

j****eek
 [?]
Sign in to view client's details.
| j****eek
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 14m ago  |  Ends: 14d, 20h  |   0 Proposals
president, vice-president, executive officer (CEO); director, deputy director, managing director, financial director, marketing director; general manager, assistant manager, manager; personnel manager, production manager, marketing manager, sales manager, project manager; supervisor, inspector;
Category: Interior Design       
Skills: 3D Design       

h****rch
 [?]
Sign in to view client's details.
| h****rch
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 25m ago  |  Ends: 29d, 20h  |   3 Proposals
I own a pond and lake management business. I have an idea for an aeration product that I feel could revolutionize the industry and make a great deal of money if it can be manufactured at a certain price point. I have spoken with multiple aeration companies who have expressed interest in seeing the prototype, but I personally have no background in engineering and need help designing said prototype.
Category: Mechanical       
Skills: Mechanical Engineering       
Preferred Location: United States

p****guy
 [?]
Sign in to view client's details.
| p****guy
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 45m ago  |  Ends: 14d, 20h  |   2 Proposals
I'm looking for a manufacturer to manufacture a small number of prototypes for a backpack design. Technical specifications have already been prepared. The only tasks needed now are: * Determine feasibility of manufacturing prototype based on technical specifications * Identifying potential suppliers and manufacturers willing to work on producing a small number of prototypes * Manufacture prototype
Category: Product Design       
Skills: Manufacturing Design       

j****ran
 [?]
Sign in to view client's details.
| j****ran
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: 4h, 39m ago  |  Ends: 14d, 19h  |   7 Proposals
Mechanical engineering requiring CAD drawings and designs for various targets systems and related equipment.
Category: Other - Engineering &...       
Skills: AutoCAD, Industrial Engineering, Electronics       

g****rsf
 [?]
Sign in to view client's details.
| g****rsf
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 6h, 31m ago  |  Ends: 14d, 17h  |   3 Proposals
? Ability to read, analyzes, and interprets blueprints ? Organization/time management skills ? Ability to work independently as well as part of a team, good attention to detail ? Ability to meet deadlines and recognize discrepancies ? General understanding of electrical system drawings ? Knowledge of basic AutoCAD skills ? Capable of reading 2D plans, electronically or hard copy ? Working knowledge of 3D layout and design
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

h****ton
 [?]
Sign in to view client's details.
| h****ton
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 10m ago  |  Ends: 2d, 16h  |   12 Proposals
I am in need of a designer, either a mechanical engineer, industrial designer or a CAD experienced professional We have built the proof of concept and we have a requirements document as well as information regarding our target market which might help in the design process. The right person for the job will be able to enhance our proof of concept with purposeful design, to take a proof on concept into the prototype phase, with the goal being a design and spec package which is a biddable set of documents for manufacturers. I expect the work to take between up to 15 hours, although that could change as the scope of the project develops. The right person doesn't need to be in Maryland.
Category: Product Design       
Preferred Location: United States

p****ter
 [?]
Sign in to view client's details.
| p****ter
|    United States
Fixed Price: More than $10,000   |  Posted: 7h, 13m ago  |  Ends: 14d, 16h  |   1 Proposal
I am looking for the development of a portable device which will be able to recognize at a certain level, images printed at the back side of a cardboard. Recently, I have heard the development of microchip utilizing Terahertz for "Xray" short of vision. Maybe there is another technology, that I am not aware of. If this kind of technology/device is in prototype or test mode, I am still interested.
Category: Other - Engineering &...       

s****ist
 [?]
Sign in to view client's details.
| s****ist
|    Greece
Fixed Price: More than $10,000   |  Posted: 7h, 16m ago  |  Ends: 29d, 16h  |   0 Proposals
I am looking for the development of a portable device which will be able to recognize at a certain level, images printed at the back side of a cardboard. Recently, I have heard the development of microchip utilizing Terahertz for "Xray" short of vision. Maybe there is another technology, that I am not aware of. If this kind of technology/device is in prototype or test mode, I am still interested.
Category: Other - Engineering &...       

s****ist
 [?]
Sign in to view client's details.
| s****ist
|    Greece
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 16m ago  |  Ends: 14d, 16h  |   13 Proposals
My name is Allen, I am searching for someone who could assist me with my invention idea. I completed a provisional patent and it has been accepted. I need for someone to help me with a (2-D and 3D-CAD) drawings and images. After the completion of the (2-D & 3D-CAD), I will need a Prototype for my invention. Currently I do not have my NON Disclosure Agreement available at the moment. However, I can be reached at 732-213-0870 for more details. I look forward to hearing from someone soon!! P.S. I am pursuing this project with very limited resources.Therefore,reasonable prices is what I am searching for as well.
Category: CAD       
Skills: AutoCAD, SolidWorks       

w****as4
 [?]
Sign in to view client's details.
| w****as4
|    United States
Fixed Price: Not Sure   |  Posted: 7h, 33m ago  |  Ends: 14d, 16h  |   0 Proposals
Looking to have a site with a landing page opt-in builder that works along with aweber and getresponce. This will not use the form from aweber or getresponce but the html script for the campaign can be put into the builder for custom forms with in the landing page builder that people have to sign up and be a member to use free. Must know what you are doing. I don't want bugs forever on this thing.
Category: Product Design       
Skills: Application Programming, AWeber       

s****la2
 [?]
Sign in to view client's details.
| s****la2
|    United States
Fixed Price: $50 - $150   |  Posted: 7h, 36m ago  |  Ends: 14d, 16h  |   8 Proposals
I need someone that is experienced in Eagle CAD to make a change to an existing PCB. This change consists of hooking up three new low power MOSFETs, adding 0603 three resistors, and rewiring a couple of nets. I will provide both the eagle schematic and PCB, plus a pdf of the new schematic with the changes highlighted. If we are happy with the results, this will probably lead to future jobs too. I'm a circuit designer but I'm not very good with Eagle. So no circuit design experience needed, just lots of experience laying out printed circuit boards with Eagle CAD. Thanks.
Category: CAD       
Skills: OrCAD, Electronics, PCB Design       

J****lEE
 [?]
Sign in to view client's details.
| J****lEE
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 7h, 39m ago  |  Ends: 14d, 16h  |   1 Proposal
Need someone with AGTEK Earthworks 4D to create an earthwork estimate. It is for a roadway and we will need cut / fill quantities plus a model shown on google earth.
Category: Civil & Structural       
Skills: 3D Modeling, Architecture, Civil Engineering       

t****tph
 [?]
Sign in to view client's details.
| t****tph
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 12m ago  |  Ends: 14d, 15h  |   3 Proposals
Our Team has a concept for a new medical accessory. Dublin based start up, looking to outsource design for a new multi-functional medication dispenser. Want to design a product that can dispense medication ranging from pills, epinephrine, insulin, inhalation medication. Design should be based around interchangeable accessories for one product. Must have child proof design. Product should be easily portable/wearable i.e designed to fit on a key ring/clip onto trousers or in any other manner that prevents forgetting the product whilst also provides ease of use. Designer should be aware of latest trends in medical industry and have firm skills within product development and innovation. This is a paid pitch for a product prototype. Should have clear design on product, components of product and materials aimed for using. This should be illustrated in 3D and should feature CAD A competitive rate and well designed product will lead to future business dealings. Submissions Finish 00.00 G...
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

K****eds
 [?]
Sign in to view client's details.
| K****eds
|    Ireland
Fixed Price: Less than $500   |  Posted: 8h, 24m ago  |  Ends: 14d, 15h  |   2 Proposals
I have an idea that I have trouble with creating the actual tangible product itself to sell, the product im looking to be designed is a black box the size of a regular nightstand square clock with a digital screen that shows percentages starting from 1% going up to 100%. On top of the box there sould be a green button to increase the percentage and a red button to decrease this number. The box should also work through wifi to be able to keep a record of all these boxes data.
Category: Product Design       

M****123
 [?]
Sign in to view client's details.
| M****123
|    United States
Fixed Price: Less than $500   |  Posted: 8h, 41m ago  |  Ends: 2d, 15h  |   1 Proposal
Construction estimator needed to determine cost of renovations of a church. Complete plans for bidding and construction are available for use in doing take-offs. Renovations include stripping a flat roof for construction of a 14'x40' choir loft; stairs; LULA elevator; and reconstruction of restrooms for barrier free. Scopes of work are available for the following: Carpentry, Concrete, Demolition, Drywall, Electrical, Elevator, Insulation, Mechanical, Plumbing, Roofing. Detailed take-offs for construction are NOT needed, only assembly (square foot) cost for budget purposes. Material and Labor should be separated for local adjustment or cost shall be on US national average with local/regional adjustments. Estimator shall provide its own estimating software or books for use in preparing estimate. Final estimates should be in 4 categories - 1) Barrier Free Restrooms 2) LULA elevator 3) Choir Loft and stairs 4) Mechanical ductwork. Details of cost determination shall be provi...
Category: Architecture       
Preferred Location: United States

C****Mon
 [?]
Sign in to view client's details.
| C****Mon
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: Not Sure  |  Posted: 8h, 53m ago  |  Ends: 14d, 15h  |   9 Proposals
Looking for an experienced Revit drafter for several projects in CA. The candidate is going to be working on average 30 hrs/wk. Needs to have his/her own software.
Category: CAD       
Skills: AutoDesk Revit       

k****hka
 [?]
Sign in to view client's details.
| k****hka
|    United States
Fixed Price: Less than $500   |  Posted: 9h, 20m ago  |  Ends: 14d, 14h  |   15 Proposals
I am looking for a 3D animator that can create animations, cutaways, and simulators designed to show how a particular piece of equipment works, and the major components of a piece of equipment Equipment Types: AC Motor Centrifugal Pump Reciprocating Compressor Multi-Stage Compressor Axial Pump Wind Turbine Simple Cycle Gas Turbine Simple Cycle Steam Turbine Paper Machine Converting Machine Positive Displacement Pump Rolling Element Bearings Sleeve Bearings Different types of shaft misalignment Simulators- Would include a variety of things that we can discuss after the models are complete. These animations and simulators will be added to training materials I have developed within Articulate Storyline and Presenter. Please submit at least one example of your work. This will be a long-term engagement depending on the quality of the first animation. As a fellow freelancer I'm looking for someone who is as dedicated to detail and customer satisfaction as I am. Important: You are bid...
Category: 3D Modelling       
Skills: 3D, Animation       

m****mrp
 [?]
Sign in to view client's details.
| m****mrp
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 9h, 41m ago  |  Ends: 6d, 14h  |   10 Proposals
Need someone who can create cool looking 3d drawings based on our 2D concepts. This is a container/cartridge with tamper proof cap. The drawings do not need to be functional, they will be used in a proposal only and not converted to solid products at this stage. We are based in NYC.
Category: 3D Modelling       
Skills: 3D       
Preferred Location: North America

m****ank
 [?]
Sign in to view client's details.
| m****ank
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: 9h, 44m ago  |  Ends: 14d, 14h  |   10 Proposals
We have have a dimensioned 2d drawing that we need converted to Autodesk inventor for CNC milling output. The material will be milled out of G10 Epoxy. There are 8 unique parts that will be gang in most efficient manner and configured based on limitation of 1/2" thickness of G10 Epoxy sheet material. Sheet material is 48.5" x 48.5" x .5" We will be using the latest Autodesk collaboration software to for the work group. Possible long term contract setting up files for manufacturing with variations. Ideal candidate would have some composites experience with background in sailing, kiteboarding or marine industry.
Category: 3D Modelling       
Skills: Autodesk Inventor, Autodesk Maya       

t****com
 [?]
Sign in to view client's details.
| t****com *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 47m ago  |  Ends: 14d, 14h  |   2 Proposals
Design a durable, aesthetically pleasing credit card swiper to attach to an iPhone, iPad & iPad Mini. The end product is to produce both a prototype of the swiper and a digital design to hand over to a manufacturer to build the swiper. Key Requirements The magnetic swiper head must be easily replaceable by a non-technical person. The swiper must not swivel or rotate like Square's swiper. The swiper must firmly attach to the device. The swiper must be small, but not compromise on usability. The swiper must be durable and not broken easily. The swiper must be light and inexpensive to produce. The swiper must be aesthetically pleasing and produce a feeling of durability and quality when viewed. Maybe even elegance. Key Results A Prototype swiper for the iPhone, iPad and iPad Mini. Integration of the prototype with a prototype of the working electronics. Files to provide for manufacturing of the final product.
Category: Product Design       

f****ise
 [?]
Sign in to view client's details.
| f****ise
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 51m ago  |  Ends: 14d, 14h  |   0 Proposals
Design and implement a credit card swiper that will interface with the iPhone and iPad lightning connector. The end product is to produce both a working prototype of the electronics for the swiper and a digital design to hand over to a manufacturer to build the swiper. Key Requirements The magnetic swiper head must be easily replaceable by a non-technical person. The swiper must be reliable. The device must not require charging, but may draw power from the lighting connector. Key Results A Prototype swiper for the iPhone, iPad and iPad Mini. Integration of the prototype with it's housing. Output to provide for manufacturing of the final product. Optional (Industrial Design) Design a durable, aesthetically pleasing credit card swiper to attach to an iPhone, iPad & iPad Mini. The end product is to produce both a prototype of the swiper and a digital design to hand over to a manufacturer to build the swiper.
Category: Electrical       
Skills: Electrical Engineering       

f****ise
 [?]
Sign in to view client's details.
| f****ise
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job