Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: May 21, 2015  |  Ends: 13d, 22h  |   9 Proposals
ARDUINO-BASED CUTDOWN DEVICE FOR HIGH ALTITUDE BALLOON This project would involve designing, programming, and fabricating a finished prototype, possibly using a small single-purpose Arduino processor (i.e. Micro or Nano, or something similar) to serve as a cutdown device for a high altitude balloon. Requirements: - The device needs to be as small, lightweight, and durable as possible. - The device needs to operate using an Energizer Advanced Lithium 9-volt battery as its power source. Operation: Basically, the device would be a simple timer. - Turn on the device and a small red LED begins to flash, letting the user know that the device is active. - Turning on the device starts a 60-minute countdown. At the end of the 60-minute period, the device would activate a reed relay to allow current from the 9-volt battery to flow to a user-supplied piece of nichrome wire that would heat-up and sever a small piece of braided mason lin...
Category: Contract Manufacturing       
Skills: Electrical Engineering, Electronics, Arduino       

d****ray
 [?]
Sign in to view client's details.
| d****ray
|    United States
Fixed Price: Less than $500   |  Posted: May 19, 2015  |  Ends: 11d, 23h  |   0 Proposals
We are looking for a contract manufacturer in Thailand of a new health product (Do it yourself Pho Soup Kit including a condensed pho paste and the rice noodles). We are a market leader in developing natural products and have a number of market leading brand in Australia and New Zealand. Our starting point is to find a list of contract manufacturers that are already developing a similar product for other companies so we can meet and contact them. The products and companies we are interested in finding the contract manufacturer for are (in order of preference) ? Nem Viet ? Vietnemese Pho Kit -   [obscured]  /products/view/kits/vietnamese-pho ? Asian Home Gourmet Pho -   [obscured]  /our-range/spice-pastes/vietnamese-pho.php ? Hansell Soup ? Pho (or wonton soup) (Stocked in Australia and New Zealand) -   [obscured]  /#product ? Authentic Asia Soups: -   [obscured]  /our-range.htm The Job Research the following compan...
Category: Contract Manufacturing       
Skills: Market Research       
Preferred Location: Thailand

M****ses
 [?]
Sign in to view client's details.
| M****ses
|    Australia
Fixed Price: $1,000 - $5,000   |  Posted: May 18, 2015  |  Ends: 10d, 21h  |   2 Proposals
Mido Dairy is a dairy production company based in Kabul. Mido Dairy has brought all its techonology from The Netherlands and seeks an experienced dairy professional to take the position of Production Manager and train the personnel.
Category: Contract Manufacturing       

m****iry
 [?]
Sign in to view client's details.
| m****iry
|    Netherlands
Fixed Price: Not Sure   |  Posted: May 18, 2015  |  Ends: 10d, 0h  |   16 Proposals
Looking for a sourcing agent with experience to help an American company source different products in China. This sourcing agent will find factories, get samples, negotiate with factory, source packaging, inspect product before sent to the USA. Long term potential. Great organization and follow up skills a must.
Category: Contract Manufacturing       

m****ton
 [?]
Sign in to view client's details.
| m****ton
|    United States
Fixed Price: Not Sure   |  Posted: May 17, 2015  |  Ends: 9d, 1h  |   10 Proposals
I need a quote for a set of 4 plastic parts for a product enclosure. The part is textured on the outside. (Please specify draft) - Base - Top cover - Back cover - Front bezel. Quantity is 20000 per year Please also quote first sample for approval if charged. Please provide you best quote. Use exclusively Alibaba system. (No email) Regards serge
Category: Contract Manufacturing       

d****eip
 [?]
Sign in to view client's details.
| d****eip
|    United States
Fixed Price: Not Sure   |  Posted: May 16, 2015  |  Ends: 8d, 0h  |   2 Proposals
A popular tool used by sprinters to increase air resistance while training is a parachute that trails behind them as they sprint. For familiarization purposes, attached is a picture of an existing sprint chute. Some companies offer multiple sizes, but only a few sizes at most. The goal of this project is to build a parachute with an adjustable size. This will allow the sprinter to follow the principle of progressive overload, which holds that in order to develop fitness to high levels, small incremental changes must be made over time. Size adjustments will be accomplished by adding or removing segments lined with Velcro. The size of each segment will be determined by how much drag (in pounds) we want each segment to add. Hypothetically, a good number will be approximately one pound. To get a starting point, drag will be calculated using the drag equation: D = 1/2 x Cd x rho x v^2 x A, where D is drag force, Cd is the drag coefficient, rho is the density of air, v is the sprinter spee...
Category: Contract Manufacturing       
Skills: Manufacturing Design       

p****abo
 [?]
Sign in to view client's details.
| p****abo
|    United States
Fixed Price: Not Sure   |  Posted: May 15, 2015  |  Ends: 25d, 22h  |   3 Proposals
Looking for a manufacturing company to prototype my brand sneaker. Looking for a long time partner to run the manufacturing process
Category: Contract Manufacturing       

a****313
 [?]
Sign in to view client's details.
| a****313
|    United States
Fixed Price: $5,000 - $10,000   |  Posted: May 14, 2015  |  Ends: 6d, 15h  |   9 Proposals
Modification for a treadmill to be used only for walking exercise and not for running. The crude prototype is made. I need advise on 1 - a commercial prototype production and 2 - commercial production of unites. I need expertise in the treadmill Industries to produce the commercial prototype and the final commercial production.
Category: Contract Manufacturing       
Preferred Location: North America, Western Europe, Australia/Oceania

h****003
 [?]
Sign in to view client's details.
| h****003
|    Qatar
Fixed Price: Less than $500   |  Posted: May 13, 2015  |  Ends: 5d, 22h  |   13 Proposals
Hi l'm looking for 3d printing. I own a helmet design and needed only to be printed.
Category: Contract Manufacturing       
Skills: 3D Printing       

s****hal
 [?]
Sign in to view client's details.
| s****hal
|    United States
Fixed Price: Not Sure   |  Posted: May 11, 2015  |  Ends: 3d, 19h  |   2 Proposals
Hello, *packaging / box design *drawstring pouch design *embroidery *production / outsourcing I need to refine my packaging. Currently I uses bagsandbows.com and it is very simple but my jewelry line has grown significantly and I need the packaging to reflect the high quality of my jewelry which start at $1,000 and up to $11,000 per item. I specialize in pearl necklaces. But I will need packaging that is appropriate for multiple items. I am thinking 5.5 by 5.5 inches, 3.5 in tall. I would rather invest more in a jewelry pouch, which is re-usable, rather than the box, which is a throw away. If the box can be very luxury yet recyclable I would be very happy. Either recyclable or something very easy to re-use, like a tin box. If you can manage the design of the box and the drawstring pouch that would be great, I also would like bags but the would be an extra to be discussed depending on pricing. I am small retailer with only once store whichI sell so I cannot order more than 200...
Category: Contract Manufacturing       

J****015
 [?]
Sign in to view client's details.
| J****015
|    United States
Fixed Price: Not Sure   |  Posted: May 11, 2015  |  Ends: 3d, 17h  |   2 Proposals
My name is Jazmin Tompkins, I am looking to start up a unique and organic make up company that will not only accommodate one skin color but all skin colors with one shade.
Category: Contract Manufacturing       

j****e21
 [?]
Sign in to view client's details.
| j****e21
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Apr 23, 2015  |  Ends: 60d, 6h  |   0 Proposals
Timely progress review meeting with customer as well as internal meetings with other support functions Follow up of various services offers from the subvenders and releases the work order after the final engotiations Coordination with finance department for the submission of invoices to the clint, releasing the payment of sub venders and site imprest for the hasseles free operations.Follow up with customer for the collection against the submitted invoices, as per the contract
Category: Contract Manufacturing       

r****h30
 [?]
Sign in to view client's details.
| r****h30
|    India
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job