Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: $10 - $15 / hr   |  Duration: 4-6 months  |  Posted: 11h, 21m ago  |  Ends: 14d, 12h  |   0 Proposals
Hi, We're a UK based footwear manufacturer and retailer. We're looking for someone to search and source manufacturers in Europe for a number of private label products. Tasks will include - thorough online research to find product suppliers - contacting and liaising with manufacturers - making sourcing decisions - negotiating costs and production schedules Opportunity for additional design related responsibility and input into brand product design and selection. Preferred attributes of candidates - - Experience and understanding of the buying and sourcing process - Candidates based in Europe as the majority of our suppliers are Europe based - Candidates based in Portugal/Spain or UK is preferable - Knowledge of Portugal/Spain manufacturing regions - Multilingual - Portugese/Spanish ideally - Can Google
Category: Contract Manufacturing       

h****orc
 [?]
Sign in to view client's details.
| h****orc
|    United Kingdom
Fixed Price: Less than $500   |  Posted: May 21, 2015  |  Ends: 13d, 23h  |   9 Proposals
ARDUINO-BASED CUTDOWN DEVICE FOR HIGH ALTITUDE BALLOON This project would involve designing, programming, and fabricating a finished prototype, possibly using a small single-purpose Arduino processor (i.e. Micro or Nano, or something similar) to serve as a cutdown device for a high altitude balloon. Requirements: - The device needs to be as small, lightweight, and durable as possible. - The device needs to operate using an Energizer Advanced Lithium 9-volt battery as its power source. Operation: Basically, the device would be a simple timer. - Turn on the device and a small red LED begins to flash, letting the user know that the device is active. - Turning on the device starts a 60-minute countdown. At the end of the 60-minute period, the device would activate a reed relay to allow current from the 9-volt battery to flow to a user-supplied piece of nichrome wire that would heat-up and sever a small piece of braided mason lin...
Category: Contract Manufacturing       
Skills: Electrical Engineering, Electronics, Arduino       

d****ray
 [?]
Sign in to view client's details.
| d****ray
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 88d, 9h  |   0 Proposals
We are looking for a manufacturer of aerosol paints, we require the manufacturer to produce from raw materials and supply the finished goods into our warehouse in the UK. We buy in very large volumes, please find some images attached of some of our most popular products.
Category: Contract Manufacturing       

t****est
 [?]
Sign in to view client's details.
| t****est
|    United Kingdom
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: May 21, 2015  |  Ends: 13d, 7h  |   0 Proposals
Fabric Researcher to research weavers and spinners who have the ability and skills to produce Inherent Flame Resistant Woven and Knitted Fabrics in Turkey. The applicant should be local to and live in Turkey.
Category: Contract Manufacturing       

T****ett
 [?]
Sign in to view client's details.
| T****ett
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 20, 2015  |  Ends: 12d, 13h  |   0 Proposals
Hi, I am starting a brand new chai tea liquor. I am looking for someone that can help me to find the right manufacturer. Manufacturer, should be also able to develop the entire formula. More info and other requests in private. Thanks in advance Cristiano I.
Category: Contract Manufacturing       

I****sen
 [?]
Sign in to view client's details.
| I****sen
|    Italy
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: May 20, 2015  |  Closed  |   4 Proposals
I have a product that I'm having produced through a third party. I need to cut costs and find/work directly with their manufacturer or find a better manufacturer all together.
Category: Contract Manufacturing       

E****ent
 [?]
Sign in to view client's details.
| E****ent
|    United States
Fixed Price: Less than $500   |  Posted: May 19, 2015  |  Ends: 12d, 0h  |   0 Proposals
We are looking for a contract manufacturer in Thailand of a new health product (Do it yourself Pho Soup Kit including a condensed pho paste and the rice noodles). We are a market leader in developing natural products and have a number of market leading brand in Australia and New Zealand. Our starting point is to find a list of contract manufacturers that are already developing a similar product for other companies so we can meet and contact them. The products and companies we are interested in finding the contract manufacturer for are (in order of preference) ? Nem Viet ? Vietnemese Pho Kit -   [obscured]  /products/view/kits/vietnamese-pho ? Asian Home Gourmet Pho -   [obscured]  /our-range/spice-pastes/vietnamese-pho.php ? Hansell Soup ? Pho (or wonton soup) (Stocked in Australia and New Zealand) -   [obscured]  /#product ? Authentic Asia Soups: -   [obscured]  /our-range.htm The Job Research the following compan...
Category: Contract Manufacturing       
Skills: Market Research       
Preferred Location: Thailand

M****ses
 [?]
Sign in to view client's details.
| M****ses
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: May 19, 2015  |  Ends: 11d, 16h  |   0 Proposals
site management & organisation is key , managing site staff , dealing with clients ,recorded daily diary , ovesaing site logistics ,always thinking ahead and planning to be very motivational and give good feedback when needed to right people,to record risk assessments , and enforce the company policy's for staff to wear boots ppe ect, to be wiling to go on courses to enable the health & safety skill to advance to use your insensitive to work in a team and send emails and record charts on progress on sites , a driving licence is essential , at-least 5 years experience to be working in a active company round london we are based in croydon
Category: Contract Manufacturing       

e****y77
 [?]
Sign in to view client's details.
| e****y77
|    United Kingdom
Fixed Price: $1,000 - $5,000   |  Posted: May 18, 2015  |  Ends: 10d, 22h  |   2 Proposals
Mido Dairy is a dairy production company based in Kabul. Mido Dairy has brought all its techonology from The Netherlands and seeks an experienced dairy professional to take the position of Production Manager and train the personnel.
Category: Contract Manufacturing       

m****iry
 [?]
Sign in to view client's details.
| m****iry
|    Netherlands
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 18, 2015  |  Closed  |   0 Proposals
Hi Maria, I'm trying to source a product called a menstrual cup from a cheap manufacturer for my website. Here is what they look like (  [obscured]  /au/about/what-is-lunette.html) and how to use them (  [obscured]  /au/how-to/how-to-use.html). I need you to find me the cheapest manufacturer who is able to provide good quality menstrual cups with: - Customizable packaging - MoQ no more than 100-500 depending on the cost of each unit - Medical certification (CE, etc) - At least 2 sizing options Please give me your top 3 manufacturers and tell me the advantages/disadvantages of each. I also need their turn around time, from order placement to postage. If you are having difficulty sourcing a manufacturer, one site I would suggest is alibaba.com. Please commence work on this task and TOUCH BASE WITH ME AT THE 2 HOUR MARK, explaining your progress and how you have tackled the task so far. Kind regards, Dave
Category: Contract Manufacturing       

o****ice
 [?]
Sign in to view client's details.
| o****ice
|    Australia
Fixed Price: Not Sure   |  Posted: May 18, 2015  |  Ends: 10d, 1h  |   16 Proposals
Looking for a sourcing agent with experience to help an American company source different products in China. This sourcing agent will find factories, get samples, negotiate with factory, source packaging, inspect product before sent to the USA. Long term potential. Great organization and follow up skills a must.
Category: Contract Manufacturing       

m****ton
 [?]
Sign in to view client's details.
| m****ton
|    United States
Fixed Price: Not Sure   |  Posted: May 17, 2015  |  Ends: 9d, 2h  |   10 Proposals
I need a quote for a set of 4 plastic parts for a product enclosure. The part is textured on the outside. (Please specify draft) - Base - Top cover - Back cover - Front bezel. Quantity is 20000 per year Please also quote first sample for approval if charged. Please provide you best quote. Use exclusively Alibaba system. (No email) Regards serge
Category: Contract Manufacturing       

d****eip
 [?]
Sign in to view client's details.
| d****eip
|    United States
Fixed Price: Not Sure   |  Posted: May 16, 2015  |  Ends: 8d, 1h  |   2 Proposals
A popular tool used by sprinters to increase air resistance while training is a parachute that trails behind them as they sprint. For familiarization purposes, attached is a picture of an existing sprint chute. Some companies offer multiple sizes, but only a few sizes at most. The goal of this project is to build a parachute with an adjustable size. This will allow the sprinter to follow the principle of progressive overload, which holds that in order to develop fitness to high levels, small incremental changes must be made over time. Size adjustments will be accomplished by adding or removing segments lined with Velcro. The size of each segment will be determined by how much drag (in pounds) we want each segment to add. Hypothetically, a good number will be approximately one pound. To get a starting point, drag will be calculated using the drag equation: D = 1/2 x Cd x rho x v^2 x A, where D is drag force, Cd is the drag coefficient, rho is the density of air, v is the sprinter spee...
Category: Contract Manufacturing       
Skills: Manufacturing Design       

p****abo
 [?]
Sign in to view client's details.
| p****abo
|    United States
Fixed Price: Not Sure   |  Posted: May 15, 2015  |  Ends: 25d, 23h  |   3 Proposals
Looking for a manufacturing company to prototype my brand sneaker. Looking for a long time partner to run the manufacturing process
Category: Contract Manufacturing       

a****313
 [?]
Sign in to view client's details.
| a****313
|    United States
Fixed Price: $5,000 - $10,000   |  Posted: May 14, 2015  |  Ends: 6d, 16h  |   9 Proposals
Modification for a treadmill to be used only for walking exercise and not for running. The crude prototype is made. I need advise on 1 - a commercial prototype production and 2 - commercial production of unites. I need expertise in the treadmill Industries to produce the commercial prototype and the final commercial production.
Category: Contract Manufacturing       
Preferred Location: North America, Western Europe, Australia/Oceania

h****003
 [?]
Sign in to view client's details.
| h****003
|    Qatar
Fixed Price: Less than $500   |  Posted: May 13, 2015  |  Ends: 5d, 23h  |   13 Proposals
Hi l'm looking for 3d printing. I own a helmet design and needed only to be printed.
Category: Contract Manufacturing       
Skills: 3D Printing       

s****hal
 [?]
Sign in to view client's details.
| s****hal
|    United States
Fixed Price: Not Sure   |  Posted: May 11, 2015  |  Ends: 3d, 20h  |   2 Proposals
Hello, *packaging / box design *drawstring pouch design *embroidery *production / outsourcing I need to refine my packaging. Currently I uses bagsandbows.com and it is very simple but my jewelry line has grown significantly and I need the packaging to reflect the high quality of my jewelry which start at $1,000 and up to $11,000 per item. I specialize in pearl necklaces. But I will need packaging that is appropriate for multiple items. I am thinking 5.5 by 5.5 inches, 3.5 in tall. I would rather invest more in a jewelry pouch, which is re-usable, rather than the box, which is a throw away. If the box can be very luxury yet recyclable I would be very happy. Either recyclable or something very easy to re-use, like a tin box. If you can manage the design of the box and the drawstring pouch that would be great, I also would like bags but the would be an extra to be discussed depending on pricing. I am small retailer with only once store whichI sell so I cannot order more than 200...
Category: Contract Manufacturing       

J****015
 [?]
Sign in to view client's details.
| J****015
|    United States
Fixed Price: Not Sure   |  Posted: May 11, 2015  |  Ends: 3d, 18h  |   2 Proposals
My name is Jazmin Tompkins, I am looking to start up a unique and organic make up company that will not only accommodate one skin color but all skin colors with one shade.
Category: Contract Manufacturing       

j****e21
 [?]
Sign in to view client's details.
| j****e21
|    United States
Fixed Price: Less than $500   |  Posted: May 11, 2015  |  Closed  |   3 Proposals
Hello Simon, I came across your profile on elance and became intrigued in the service(s) you have to offer. To quickly introduce myself, I am the VP of a company based in the United States. We are a branded company that is mostly in the mobile accessories marketplace. I am writing this message to you because of my interest in working together. I am hoping that with your expertise, you can help me find a manufacturer that is able to fulfill the company's requirements. We are looking to complete one design (mold design) in particular. Key things I am looking for: -Must be professional -Must be responsible in handling orders on time when needed -Must have at least one English speaking person (in-office) -Must be easily available to communicate with -Must be trusted -Must ensure quality in product is highest priority -Produce with quality ABS plastic, TPU and steel/aluminum -Provide plastic injection (double-shot injection) -Must be able to provide mold design -Must be able t...
Category: Contract Manufacturing       

D****psk
 [?]
Sign in to view client's details.
| D****psk
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: May 10, 2015  |  Ends: 2d, 14h  |   7 Proposals
Find all United States-based Tea Manufacturers that are willing to Drop-Ship throughout North America (Canada, United States and Mexico). The Manufacturers MUST be Tea manufactures (they make the tea packs) in The United States, and not re-distributors. They must also be willing to Drop-Ship. Please confirm your understanding of 'Drop-Shipping' in your own words. Information required for each Tea Manufacturer: - Location (City and State/Province) - How long they have been in business for - Approximate yearly sales or amounts of shipment (either in $ or in kg) - Minimum and maximum sizes for each shipment they will drop-ship If possible, find out who some of their current clients or business customers are. Must speak English well, as phone calls may be necessary.
Category: Contract Manufacturing       

P****CEO
 [?]
Sign in to view client's details.
| P****CEO
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 07, 2015  |  Closed  |   21 Proposals
I'm searching for a firm or individual that can create a prototype of my aluminum and plastic made exercise equipment.
Category: Contract Manufacturing       

O****KHW
 [?]
Sign in to view client's details.
| O****KHW
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 07, 2015  |  Closed  |   0 Proposals
FORMAL TROPICAL INDIGENOUS GARDENS COMPUTERIZED IRRIGATION COMPOST AND LAWN DRESSING DELIVERED. WE ALSO SPECIALIZE IN IRRIGATION INSTALLATION IRRIGATIONSERVICING AND MAINTENANCE MANUAL AND AUTOMATIC SYSTERM WE MAKE YOUR GARDENS GREEN THROUGHOUT THE YEAR
Category: Contract Manufacturing       
Skills: Landscaping       
Preferred Location: South Africa

c****077
 [?]
Sign in to view client's details.
| c****077
|    South Africa
Fixed Price: $200 or less   |  Posted: May 02, 2015  |  Closed  |   2 Proposals
We're very interested in promotion and marketing methods that sport teams have used to increase supporter attendance and investment from businesses. We are looking to put together software that will help high profile professional teams in these areas. We are looking for innovative ideas that teams have used to attract new fans and business investment. Outside of the box thinking such as lottery, gamification, loyalty schemes, cashback schemes, voucher schemes, crowd funding etc... As part of your proposal please find an interesting marketing or promotional idea that has been employed and include a link. For example - European Rugby Champions Cup Final on groupon   [obscured]  /deals/northampton/gl-european-rugby-champions-cup-final/61650838 If you have an interest in innovative Marketing and Promotions and have a skill for internet based research then please submit a proposal. Many Thanks
Category: Contract Manufacturing       

S****hic
 [?]
Sign in to view client's details.
| S****hic
|    United States
Fixed Price: $500 - $1,000   |  Posted: May 01, 2015  |  Closed  |   12 Proposals
Fabricate and ship our design. We have already designed the 3D models necessary. We need metal fabrication completed.
Category: Contract Manufacturing       

C****LLC
 [?]
Sign in to view client's details.
| C****LLC *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: May 01, 2015  |  Closed  |   1 Proposal
Hello, My name is Clay Hunt and my company is in Fort Worth. We need of a translator for one of our Chinese business partners. It would be from 1:00pm - 9:00pm Saturday, May 2nd and would be discussions regarding our business in the afternoon, followed by dinner in the evening. Please let me know if you are available and if this would interest you. Thank you and I look forward to your reply.
Category: Contract Manufacturing       
Skills: 3D Modeling, Manufacturing Design       

c****apm
 [?]
Sign in to view client's details.
| c****apm
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job