Save this Search
     
Sort by:
  • Posted Date
Architecture
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 2h, 48m ago  |  Ends: 6d, 21h  |   4 Proposals
Custom home building company looking for design assistance on a new project in the resort area near Lake Tahoe, CA. This project has a few different components: First, would need to take existing plans that are in CAD and convert into Revit format. Would then make revisions/modifications to the design, including reversing the floor plan, expanding some spaces, and altering roof lines/structure. Separately, there is a barn garage structure that has a basic plan in .pdf. Would need to re-draw this in Revit, implementing red-lined revisions to the scale and proportions. After this is complete, these structures need to be situated on to a site plan/topo map, and joined by a flat roof'd, narrow connector. The objective is to get the project ready for engineering and plan review submittal. Looking forward to getting going on this as soon as possible. Thank you for your consideration.
Category: Architecture       

b****uer
 [?]
Sign in to view client's details.
| b****uer
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 3h, 23m ago  |  Ends: 6d, 20h  |   11 Proposals
I need to get full plans drawn for a house I am going to build. I have a fairly close drawing of the floor plan. I have attached the jpgs for it. The house in my plan is currently 3800 SF + or -. I will need the full set of plans including electrical, roof, elevations, etc... Please let me know if you have any questions. I would like an architect to draw the plans. Please attach examples that you have completed for me to review. I also have interior pictures from the house we saw with a similar plan. If you'd like to see them to get an idea of our style wanted, let me know. The google drive folder is listed below:   [obscured]  /open?id=0BxPlxkJRDiwjdmN0aGRvWFctcDA&authuser=0 The link above is the home that we viewed and the plan from which the project is derived. You are surely able to see the changes that I made to the plan. We do want to make a few changes to the interior (floors, fireplace, and furniture). Also, the exterior will be a mixture of light Stucco and p...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

k****ees
 [?]
Sign in to view client's details.
| k****ees
|    United States
Fixed Price: $60 or less   |  Posted: 5h, 42m ago  |  Ends: 14d, 18h  |   3 Proposals
I have an autocad file of a overall floor plan that needs to be converted to a revit plan with revit walls doors windows, etc. Height doesn't matter. Equipment, casino games and built-in furniture such as counters can just be 2d cad block xref into the Revit plan. Plan also needs to be updated to reflect differences shown in the attached jpg of the different areas. I need a really quick turn around, I need tomorrow by 12 pm EST.
Category: Architecture       

j****777
 [?]
Sign in to view client's details.
| j****777
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 23m ago  |  Ends: 14d, 16h  |   3 Proposals
We are looking for a website designer to create a website from scratch! We will give you three websites which we would like our website to be based on. It is crucial that you are the best of the best - we are a premium company and our page needs to reflect this. If you will not present a page like the below then DO NOT APPLY!   [obscured]     [obscured]     [obscured]   We require that you give a rough quote on the finished product.
Category: Electrical       

j****507
 [?]
Sign in to view client's details.
| j****507
|    Australia
Fixed Price: Less than $500   |  Posted: 7h, 25m ago  |  Ends: 6d, 16h  |   3 Proposals
I need a program for an Arduino board so that it can generate 4 types of PWM. 1. Sinusoidal pulse width modulation - SPWM 2. Selected harmonic elimination - SHE PWM 3. Space Vector PWM - SVPWM 4. Hysteresis band current control PWM The user must be able to select the type of PWM that he wants and the frequency (1-200 Hz). The system is intented to work with a single-phase inverter. The Arduino board that will be selected will be anyone with an ATMega micropcessor. The final deliverable should be the arduino code files with extensive comment documentation.
Category: Electrical       

n****pas
 [?]
Sign in to view client's details.
| n****pas
|    Greece
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 10h, 17m ago  |  Ends: 14d, 13h  |   0 Proposals
I WANT A DEVELOPER THAT CAN DEVELOP AN APP OR SOFTWARE SPECIFIC TO ARCHITECTS WHICH TRANSLATES DESIGN SKETCHES TO ACTUAL 3D LIFE MODEL BY SCANNING IT WITH LASER OR ANY CAMERA APERTURE e.g from camera from mobile phone
Category: Architecture       
Skills: 3D Modeling, Architecture, Industrial Design       

e****ibo
 [?]
Sign in to view client's details.
| e****ibo
|    Nigeria
Fixed Price: Less than $500   |  Posted: 10h, 19m ago  |  Ends: 14d, 13h  |   1 Proposal
I am looking for a maltab developer who can work on Stock prediction using ANN and other matlab toolboxes. Looking forward to build long term relationship. Budget- Below $300
Category: Electrical       

a****408
 [?]
Sign in to view client's details.
| a****408
|    India
Fixed Price: Not Sure   |  Posted: 10h, 48m ago  |  Ends: 14d, 13h  |   0 Proposals
I am an expert in solar system design. Also, I have high skill in PVsyst. I can deliver the work to satisfy client's needs with low price.
Category: Electrical       

A****wer
 [?]
Sign in to view client's details.
| A****wer
|    Thailand
Fixed Price: Not Sure   |  Posted: 10h, 49m ago  |  Ends: 29d, 13h  |   0 Proposals
I am an expert in solar system design. Also, I have high skill in PVsyst. I can deliver the work to satisfy client's needs with low price.
Category: Electrical       

A****wer
 [?]
Sign in to view client's details.
| A****wer
|    Thailand
Fixed Price: $1,000 - $1,500   |  Posted: 13h, 5m ago  |  Ends: 29d, 10h  |   12 Proposals
I would like to hire a professional for designing a home in Mumbai - India. I am purchasing an existing house having floor area of 40'x10' on each floor of a single storey house. I wish to raise one more floor above the existing first floor in order to have a master bedroom and terrace garden on the top floor. The first floor should have one master bedroom and a kids bedroom (3 kids aged 8 - 15). The ground floor shall be utilized as living room and kitchen with a full bathroom. The kitchen should be an open kitchen design with an option to partition the space for privacy from visitors/guests in the living room. The stairs leading to the upper floors shall be from inside the house. The main entrance shall have a small enclosed porch for visitors to wait before entering the living room through the main door of the house. It is only possible to have windows on two walls (front and left) as the wall on the right is adjoining the next house. existing drawings and plans can be provided to ...
Category: Architecture       
Skills: Home Design       

r****uzz
 [?]
Sign in to view client's details.
| r****uzz
|    United Arab Emirates
Fixed Price: Not Sure   |  Posted: 19h, 21m ago  |  Ends: 14d, 4h  |   23 Proposals
I need to build additional rooms in my house. Currently it has only the following: - 1 living room, dining room and kitchen - 1 bathroom - 1 bedroom I am going to build the following additional rooms: - 1 bedroom - 1 garage for 1 car next to a covered patio. It will be also used as a casual dining room when I receive a lot of guests: it must be about 3.5 meters x 6 meters. - Working room: I work from home with my computer and I need a separate room. In the pdf attached, you can see the actual floor plan. After a bid is chosen, I will submit a DWG file with the current floorplan. Your task will be to submit sketches (proposals) of the additions and I will choose the one I like most. I already have a design in mind, but I would like to see your ideas. After one sketch is chosen, you will have to submit Autocad DWG files with the final floor plan, and PDF exports of the files. Since the house is located in Argentina, your house plan doesn't need to comply with all local building co...
Category: Architecture       
Skills: Architecture, AutoCAD, Interior Design       

z****ica
 [?]
Sign in to view client's details.
| z****ica
|    Argentina
Fixed Price: Less than $500   |  Posted: 22h, 5m ago  |  Ends: 14d, 1h  |   4 Proposals
In need of an electrical engineer to design a preamp for a dynamic microphone (using a DIY board off of EBay is fine, audio fidelity is not a major priority), as well as a volume control for a set of headphones. The project enclosure should have the following: 1. A 4-pin XLR connector for headset (2-wire mic, 2-wire headphone) 2. A 6-pin XLR connector for the following: a. 2-wire incoming audio from external source b. 2-wire outgoing audio to external source c. 2-wire for 12V DC 3. A volume dial for headphone volume control 4. A push-to-talk button to un-mute the mic 5. A beltclip 6. No external mic controls are needed. A set-and-forget it internal pot can be utilized. This is for a custom intercom beltpack with specific needs.
Category: Electrical       
Preferred Location: United States

S****red
 [?]
Sign in to view client's details.
| S****red
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 22h, 8m ago  |  Ends: 14d, 1h  |   9 Proposals
This is a device that will need to be designed and manufactuered. It's a parking sensor that will detect if a car is parked or not on the spot. Each device will be install on each spot in the garage. The device needs to have receiver and transmitter capabilities. The device will be transmitting to a receiver which will transmit to a server. Please egt with me as soon as possible to discuss further details. I do not expect any estimate until you understand the entire project. So please don't send any estimate for now. Thanks,
Category: Electrical       
Skills: Electronic Design, Embedded Systems       

k****ves
 [?]
Sign in to view client's details.
| k****ves
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-3 months  |  Posted: 23h, 35m ago  |  Ends: 14d, 0h  |   8 Proposals
Create into Revit file format, suitable for architects and interior designers to readily download, open and utilize in their own Revit desktops, furniture product families for international commercial furnishings company. Must have access to Revit 2014 Scope: -- Approx. 140 product families/850 Skus, to be completed in phases of 5-10 product families, dependent on complexity Product family files should be created to the below specifications: - Small file size - Option of the "levels of details" COARSE MEDIUM FINE -Consistency in the shared parameters and nested families when possible -All variations, options and skus (information provided on cut sheets) have been included in the product family file -Correct dimensions & 3D geometry -Files must be built in a Revit version (2014) that most users can open, and ideally will be able to advise on which version of the software firms are using. Supply all files as suitable for u...
Category: Architecture       
Preferred Location: North America

J****min
 [?]
Sign in to view client's details.
| J****min
|    United States
Fixed Price: Less than $500   |  Posted: Apr 24, 2015  |  Ends: 13d, 23h  |   13 Proposals
I looking for someone to put together a 3D drawing for new entertainment facility/family fun center and office space quickly. This will be a simple 3D concept for presentation purposes. Looking for someone who is fast, creative, and able to communicate well over video chat. Google Sketch up or any 3D platform that is easy to show people would be great online easily. Want to get started right away.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

a****her
 [?]
Sign in to view client's details.
| a****her
|    United States
Fixed Price: $500 - $1,000   |  Posted: Apr 24, 2015  |  Ends: 13d, 19h  |   31 Proposals
We need to have the layout done for a small USB 3.0 camera. The camera uses a Cypress CX3 and an Aptina image sensor. The entire camera has to fit on a PCB of 29mm * 29mm, where we need to leaf a space of 1.5mm around the perimeter. The 4 corners of the PCB have to be rounded with a radius of 3mm. - The schematics of the camera is available in Altium. - All the footprints are available. - An initial placement of the major components has been done to verify if the design fits. - The layout has to be done with a 12 layer PCB. - With drilled via from top layer to bottom layer - With drilled via from first inner layer to last inner layer - With laser via from top to first inner layer and bottom to last inner layer If you are interested then let me know, I can send you the schematics and the initial placement of components in PDF format or possibly in native Altium format. Best regards
Category: Electrical       

V****ign
 [?]
Sign in to view client's details.
| V****ign
|    Switzerland
Fixed Price: Not Sure   |  Posted: Apr 24, 2015  |  Ends: 13d, 19h  |   3 Proposals
I am after a crossover designer to help create a crossover for my loudspeaker design. It is a 3 way system and I have already designed the cabinet. I need some help designing a high end crossover to match the drivers and cabinet.
Category: Electrical       

A****rth
 [?]
Sign in to view client's details.
| A****rth
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 24, 2015  |  Ends: 13d, 17h  |   11 Proposals
We are looking for somebody able to define the electronic HW and SW for a caving lamp. The mechanical design and whole project is managed for other team members. The main features of the lamp are: - system complete by battery pack + encapsulated PCB + lamp (fixed on helmet) - lamp wide light (ambient) by use of one or several LED - spot light - battery pack - battery supervision by PCB - LED driver - different program modes - charging - computer connection for set up and management - benchmarking for reference: SCURION 1500 (  [obscured]  ) Attached some picture of the first prototype.
Category: Electrical       

p****ejo
 [?]
Sign in to view client's details.
| p****ejo
|    China
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 13d, 5h  |   16 Proposals
I have a sample floor plan and outside view of a home we want to build. I need a professional architect to draw up the full construction plan that can be used by contractors to build the home, not just a floor plan. It needs to include foundation, exterior, electrical, roof, elevation, etc.. Must be a professional architect with experience designing house plans. The home in question is a two story with approx 2700 sq feet of living area and a 3 car attached garage on a slab foundation.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

h****dok
 [?]
Sign in to view client's details.
| h****dok
|    United States
Fixed Price: Less than $500   |  Posted: Apr 23, 2015  |  Ends: 13d, 5h  |   2 Proposals
Objectives: - To design a 6-bit binary to BCD converter. - To layout and perform physical verification on the 6-bit binary to BCD converter. EDA Software Required 1. Pyxis Design Manager 2. Design Architect (DA-IC) 3. ELDO 4. Ezwave 5. IC Station 6. Calibre
Category: Electrical       
Skills: Circuit Design, Semiconductor, VLSI       

1****88l
 [?]
Sign in to view client's details.
| 1****88l
|    Malaysia
Fixed Price: Less than $500   |  Posted: Apr 23, 2015  |  Ends: 13d, 5h  |   0 Proposals
Objectives: - To design a 6-bit binary to BCD converter. - To layout and perform physical verification on the 6-bit binary to BCD converter. EDA Software Required 1. Pyxis Design Manager 2. Design Architect (DA-IC) 3. ELDO 4. Ezwave 5. IC Station 6. Calibre
Category: Electrical       
Skills: Circuit Design, Semiconductor, VLSI       

1****88l
 [?]
Sign in to view client's details.
| 1****88l
|    Malaysia
Fixed Price: Less than $500   |  Posted: Apr 23, 2015  |  Ends: 13d, 5h  |   0 Proposals
Objectives: - To design a 6-bit binary to BCD converter. - To layout and perform physical verification on the 6-bit binary to BCD converter. EDA Software Required 1. Pyxis Design Manager 2. Design Architect (DA-IC) 3. ELDO 4. Ezwave 5. IC Station 6. Calibre
Category: Electrical       
Skills: Circuit Design, Semiconductor, VLSI       

1****88l
 [?]
Sign in to view client's details.
| 1****88l
|    Malaysia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job