Save this Search
     
Sort by:
  • Posted Date
Posted: Within 3 days
Fixed Price: Not Sure   |  Posted: 1h, 33m ago  |  Ends: 14d, 22h  |   0 Proposals
I need a complete camera case design that meets standard carry-on requirements of all airlines. General specs for carry on are 22x14x9 inches and 15#. This bag needs to safely and securely house a dji phantom 3 (including controller, charger and 2 batteries), a canon rebel t3i with a 17-40 mm lens, an 8-15 mm lens, a gopro camera and some accessories such as cables, gorillapod, feiyu wearable gimbal and battery charger. Drones are usually housed in dense foam and camera gear is usually housed in padded compartments but I cannot find a design that will house both with required specs. Example of drone storage:   [obscured]  /HPRC-HPRC2700WPHA3FO-Custom-Phantom-Black/dp/B00ZL3F2UY/ref=sr_1_1?ie=UTF8&qid=1441242471&sr=8-1&keywords=phantom+3+foam&pebp=1441242470657&perid=1HW0BBTQNFNBSJFA2MNG Example of camera storage;   [obscured]  /products/shootout-backpack-le-small-black.aspx Prefer ability to switch out camera gear as necessary; so prefer hou...
Category: Product Design       

r****a15
 [?]
Sign in to view client's details.
| r****a15
|    United States
Fixed Price: Not Sure   |  Posted: 5h, 0m ago  |  Ends: 2d, 18h  |   0 Proposals
Hello, I wanted to know if you could help me. I'm designing a new product that needs an internal power generation. My research has steered me towards "disc type axial flux generators /motors". See attached sketch idea. Basically I need a test bed to prove theory I have based on the contrasts that are given. I can't fully describe the entire design but part of it needs to generate electricity and output it to a outlet, which kind of mimics a typical low voltage wall outlet performance you would find at a normal house. The initial device constraints was to have a cylinder can design with a max diameter of 3.5 -5 inches, and have the device be very light weight, and requiring very little force to spin the axial flux inside. I have not specified a height yet this is all a idea in testing phase. What I'm requesting is a design or instructions to create a test bed in my shop and so I can build and tested it, the shape and design are critical. This is a generator, I will ...
Category: Electrical       

m****478
 [?]
Sign in to view client's details.
| m****478 *
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 20m ago  |  Ends: 14d, 15h  |   8 Proposals
I have an idea for a product, but can't seem to come up with the right design. I need the help of an expert to help complete the design. I will attach a list of what the product will have.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Fixed Price: Less than $500   |  Posted: 23h, 0m ago  |  Ends: 14d, 0h  |   5 Proposals
I am looking for a manufacturer that can provide me with prototypes of an iPad case/strap made out of rubber/silicone. I have 3 professionally made 3d images bad on my design to provide you with. I can give approximate sizes but without knowing how soft or flexible the rubber/silicone material is i will need to rely on the manufacturers knowledge and help with their materials. Initially i would only be looking for 3 prototypes for the Kindle or iPad mini designs. Please contact me with an approximate price, time frame and any information you feel may be useful relating to the process.
Category: Product Design       
Skills: Manufacturing       

w****dia
 [?]
Sign in to view client's details.
| w****dia
|    Australia
Fixed Price: Not Sure   |  Posted: 23h, 52m ago  |  Ends: 2d, 0h  |   27 Proposals
I have a PCB that needs a redesign + improvement. It will need to be coded from scratch but it's a simple device. Looking for someone who can do it within 2 weeks as it's a priority job.
Category: Electrical       

t****gak
 [?]
Sign in to view client's details.
| t****gak
|    Australia
Fixed Price: Less than $500   |  Posted: Sep 01, 2015  |  Ends: 13d, 19h  |   14 Proposals
We need a Rc Plane designed. The plane needs to be very similar to this one   [obscured]  /hobbyking/store/__27132__Skywalker_X_8_FPV_UAV_Flying_Wing_2120mm_.html We need CNC DFX vector files as part of the design. Further details will be shared on contact.
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: About $1,500   |  Posted: Sep 01, 2015  |  Ends: 13d, 19h  |   5 Proposals
We need a Laser range finder design and produced. Requirments: 1) Portable 2) Range of 10km 3) Accuracy of +- 10m at 10km Further details will be discussed
Category: Product Design       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 13d, 16h  |   8 Proposals
Background: We are currently using the nrf51822 as a proximity tag that triggers when the beacon (client) is within a specified distance from the host (transceiver). Scope of Work: Develop firmware to do trigger proximity alarms: 1. In a specified distance from the host transceiver 2. In a specified location from the host transceiver (e.g. front, left, right or back)
Category: Electrical       

c****gjt
 [?]
Sign in to view client's details.
| c****gjt
|    United States
Fixed Price: Not Sure   |  Posted: Sep 01, 2015  |  Ends: 28d, 14h  |   4 Proposals
I need a device created that will do the following things: - will be mounted inside of a metal box (like container) - will need to be able to read tags that are stuck on metal - reading range +-2,5m - special tags will be programmed so the device will react differently based on what tag has been read - the tags should be as cheap as possible - EUROPEAN Frequency ranges only The deliverables should be: - the device itself in working order Further details will be discussed later
Category: Product Design       

a****ldi
 [?]
Sign in to view client's details.
| a****ldi
|    Belgium
Fixed Price: Not Sure   |  Posted: Aug 31, 2015  |  Ends: 12d, 19h  |   12 Proposals
Need an EE to review circuit diagram and assist in identifying/specifying referenced missing components and any others that may not be referenced in order to complete/enhance prototype design. Project involves small brushless electric motors used in the hobby industry for radio controlled helicopters, drones, planes, cars, etc. Please inquire directly and I'll share diagram after an NDA is executed.
Category: Electrical       
Skills: Electrical Engineering, Electronics       

c****ko1
 [?]
Sign in to view client's details.
| c****ko1
|    United States
Fixed Price: More than $10,000   |  Posted: Aug 31, 2015  |  Ends: 12d, 17h  |   11 Proposals
We are looking for a talented group or company to partner with in creating this ATM machine. Top level have to features: 1) It needs to provide all the standard functionality of a normal ATM 2) Gaming feature will be focused around casino games 3) Win points to access your money at no fee For the hardware we are looking for the CD and DD design work and documents. All software development necessary for the machine and features. We are in the early stage of features and are looking for an experienced people to partner with an finish putting it all together. We understand that your bids are not final. So take the features above and give us some high end bids that can accommodate them. We need to see rough pricing and time estimates to gage which companies have experience so please be thorough.
Category: Product Design       

a****pps
 [?]
Sign in to view client's details.
| a****pps
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Aug 31, 2015  |  Ends: 12d, 13h  |   10 Proposals
Hi there, Our client is a manufacturer of kitchenware, and we are looking for a industry designer specialize in non-stick pan designing, we will be consulting for some advises towards non-stick pan design. It will be ideal if you are based in Canada or North America. It'd be better if you are experienced or we also can get some fresh idea from you. Feel free to summit your proposal. This project will lead to a long term corporation if satisfied. (We may ask for your LinkedIn pages to know more about you.)
Category: Product Design       
Preferred Location: North America

r****yxu
 [?]
Sign in to view client's details.
| r****yxu
|    Canada
Fixed Price: $500 - $1,000   |  Posted: Aug 31, 2015  |  Ends: 57d, 13h  |   10 Proposals
We are looking for a hardware/software developer (mechanical/electronic engineer) who can implement a complete custom project for a GPS/GSM/GPRS tracking unit for motorcycles. The units purpose is to gather GPS data and other data (live tracking, speed, distance and other common tracking features) and track the information back to a web application and alerts in mobile phone. SKILLS: Schematic Circuit Diagram, Circuit Design, Electrical Drawing, Electrical engineering, Electronic Design, Electronics, Embedded C, Embedded Systems, GPS Development, PCB Design If you DO NOT have a prior experience using GPS/GSM/GPRS module in vehicle tracking, please do not bid on this project, we would prefer to see prior work before we award the project. REQUIREMENTS: 1. Sending GPS co-ordinates to our server (GPS/GPRS) and/or SMS alerts for motion. Tracked using IMEI; 2. Have a rechargeable lithium battery. Basing your experience you can choose the best one. Long life battery is appreciated; 3. Must...
Category: Product Design       

i****ide
 [?]
Sign in to view client's details.
| i****ide
|    Brazil
Fixed Price: $500 - $1,000   |  Posted: Aug 31, 2015  |  Ends: 12d, 9h  |   15 Proposals
Our firm has recently acquired a 3,000 hectare land in Sub-Saharan Africa. We would require an electrical engineer (or equivalent) to provide us with a 5 page presentation which includes the following details: 1. The radiation levels on the land (we have the coordinates) 2. Distance from the grid; possible solutions to infrastructure issues that may arise 3. Expected number of panels required to get the highest returns 4. Expected costs (approximate) 5. Expected level of investment required.
Category: Electrical       

o****dba
 [?]
Sign in to view client's details.
| o****dba
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job