Save this Search
     
Sort by:
  • Posted Date
Contract Manufacturing
Fixed Price: Less than $500   |  Posted: 3h, 23m ago  |  Ends: 29d, 20h  |   0 Proposals
We have small paper tubes 6mm id 7mm od - 50 mm length. we need to assemble the tubes in plastic cartridges as shown in the attached picture. The cartridge has two parts and when tubes are inserted in the one part and the other part of the cartridge is inserted, it looks like a strip as shown in the picture. There are 27 pins in the cartridge. 5 pins are little lengthier to ensure tight holding of the tubes. Design an automatic machine to fill automatically the plastic cartridges with tubes.About 10,000 strips are to be filled in a day. You have to ensure that damaged tubes are eliminated and all the pins are filled before next cartridge is passed on.
Category: Mechanical       

f****san
 [?]
Sign in to view client's details.
| f****san
|    India
Fixed Price: $150 - $400   |  Posted: 5h, 56m ago  |  Ends: 14d, 18h  |   3 Proposals
Looking for quality practicing M&E engr who fulfils requirements below: -possess minimum qualifications of degree in M& E Engr -possess practical experience in building plans and solutions This is small project that involves drawing building plans and offering solutions to problems + preparing report If you fulfil requirements above, please send (a) samples of work done for previous clients (b) resume/ qualifications/practical work experience
Category: Mechanical       

b****rca
 [?]
Sign in to view client's details.
| b****rca
|    Malaysia
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 14h, 18m ago  |  Ends: 14d, 9h  |   8 Proposals
Hi Alexander I'm looking for help designing a Floating Work Table for Uber Attached files for your review and this is a fast moving project that I need finish drawings in 10 days. My client only except solidworks files Thanks Sai Chiang Monster Route
Category: Mechanical       
Skills: SolidWorks       

m****sai
 [?]
Sign in to view client's details.
| m****sai
|    United States
Fixed Price: Not Sure   |  Posted: Aug 30, 2015  |  Ends: 13d, 23h  |   3 Proposals
Hello, I need someone who prepare for me a video tutorial on how to analyze a radiator in Ansys using porous medium. I'll provide you a "agdb" file that containts the geometry, the named selections, etc. Ideally you should work in Ansys V15. I need a qucik turnaround. I'll provide more details to the right candidate.
Category: Mechanical       
Skills: ANSYS, SolidWorks, Mechanical Engineering       

p****785
 [?]
Sign in to view client's details.
| p****785
|    United Kingdom
Fixed Price: $80 - $100   |  Posted: Aug 29, 2015  |  Ends: 5d, 1h  |   4 Proposals
My Research topic is:Two dimensional modelling of sand production, using Finite volume to solve the governing equation and then use C++ to program.A C++ Visual code would be used to solve a 2Dimensional Navier stoke's equation in order to predict the critical drawdown pressure. I have been able to obtain the governing equation and discretise using finite volume.I have been given a C++ Visual code of 2D Full Navier stokes equation comprising of the Energy equation,Momentum and Pressure Equation which i have to solve for a flow in a pipe and obtain the Temperature,U and V velocity, temperature distribution and then the pressure distribution in the pipe. I wish to check the functionality of the code by making it obtain the required result with the various boundary conditions imposed(Top and Bottom -Insulated, Left-Dirichlet, Right-Convective).After solving the Navier stoke's equation for the above problem , i would also need to incorporate the code to determine the critical drawdown press...
Category: Mechanical       
Preferred Location: Western Europe, Eastern Europe, India/Southern Asia, Eastern Asia, Middle East & Central Asia, Central & South America

y****thy
 [?]
Sign in to view client's details.
| y****thy
|    Nigeria
Fixed Price: $100 - $300   |  Posted: Aug 29, 2015  |  Ends: 12d, 7h  |   3 Proposals
Parametric analysis of Solidworks flow simulation are to be carried-out using flow simulation API, the main idea is to edit already generated codes in VB 6.0 into VB.net or C++ (prefeably C++) , a plugin in terms of fluid codes (using codes already generated in C++ for navier-stokes momentum equation) should be embedded into the solidworks flow simulation environment), the VB 6 codes are able to do the following: 1. Change different impeller types used for the study 2. vary fluid height in the mixing vessel 3. Varying impeller rotational speed 4. Vary impeller distance from the bottom of the mixing vessel The plugin codes are written in C++, and its untended to be introduced into the mixing vessel as an external fluid and different results ar intended to be generated from the simulation that would determine which impeller gives better homogeneity and at what impeller distance this should be achieved. My system config and software : Win 8, 64 bit, solidworks 2015 and MS visual st...
Category: Mechanical       

p****geo
 [?]
Sign in to view client's details.
| p****geo *
|    Nigeria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 27, 2015  |  Ends: 11d, 2h  |   19 Proposals
Seeking a well experienced and well connected person in China or with connections in China who can help with sourcing 24 new products for our firm every month. Must have experience in souring and be able to do trust and background checks on vendors. Also must be able to find and locate vendors for specific products and negotiate samples and also negotiate rates. Must have good experience and also some references. Will pay hourly or by the project.
Category: Contract Manufacturing       

h****nce
 [?]
Sign in to view client's details.
| h****nce
|    United States
Fixed Price: Less than $500   |  Posted: Aug 27, 2015  |  Ends: 10d, 20h  |   14 Proposals
A chemical coated yarn called black wick is to be wrapped with 10 mm width 18" white tissue. We need to design two types of grippers for the left and right hand sides..Both the gripper should have two parts; one to grip the tissue and another to grip the wick. The tissue gripper at the right hand side should be able to swing upto to 20 degree so that when twirling takes place it can bring the tissue closer to wick. Both the grippers upon sensing the placement of the tissue and the wick should be able to rotate. At first 18" long tissue is placed over the gripper which is open.The jaws relating to tissue close now. Then we place the wick over the tissue. The jaws close and twirls to wrap the tissue When the wrapping completes the gripper should be able to hold both the wick and the tissue together. Attached video shows the manual process.The job is to design the grippers only.
Category: Mechanical       

f****san
 [?]
Sign in to view client's details.
| f****san
|    India
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: Aug 26, 2015  |  Ends: 9d, 22h  |   9 Proposals
Seeking a well qualified product development manager for a new product we are developing and will eventually manufacture. We are wanting to work with someone for a defined period of time. Most likely 6 months depending on the providers experience. The provider needs to be self motivating and willing to work between multiple teams and personality types. Good communication, organizational skills, and attention to detail are extremely important. Also, establish ambitious yet realistic deadlines and manage ongoing timelines and deliverables to hit those milestones. Provider needs to have experience with or managing the following areas: Industrial design Mechanical engineering PCB layout Electronic vendor component management. Roadmap development Program/firmware dev. for FPGA Offshore manufacturing Rapid Prototyping Project management. Battery and or power management. Ideally experience with the following: Optics or optical design. Image technology (such as sensors or image capture ...
Category: Contract Manufacturing       
Preferred Location: North America

c****b08
 [?]
Sign in to view client's details.
| c****b08
|    United States
Fixed Price: Less than $500   |  Posted: Aug 26, 2015  |  Ends: 1d, 18h  |   19 Proposals
We have a camera / scanner that we use in the manufacturing. We need to mount an air nozzle to it to protect the face from the environmental I have attached a sketch in powerpoint as well as the cad of the air nozzle. we are looking for mechanical services for some updates to the retention of the scanner and the air knife retention to the scanner.
Category: Mechanical       

I****ual
 [?]
Sign in to view client's details.
| I****ual
Fixed Price: $80 - $130   |  Posted: Aug 26, 2015  |  Ends: 9d, 17h  |   2 Proposals
Coding and numerical simulation using ABAQUS and UMAT Need numerical simulation working experience for this kind of work. See the attached paper for the overview of the work.
Category: Mechanical       

m****d90
 [?]
Sign in to view client's details.
| m****d90
|    Germany
Fixed Price: Not Sure   |  Posted: Aug 26, 2015  |  Ends: 9d, 16h  |   7 Proposals
Most of the time I have 120VAC available via generators. However, when the generators (which is the prime power source) run out of diesel I need at least an hour or two to continue powering my sensors and cell modem. They both require 12VDC and at full draw require 350ma. This is the peak when the cell modem is transmitting. While not transmitting the requirement is less than 100ma. So I need batter backup. Solar is another option as more and more I am going to places where the generators are only used at night (light towers). I may have to get more use out of this option at some point. Here are the general specifications: - 120VAC input - Battery backup (4x AA or equivalent) - Solar backup (12v 10W panel) - 12-15V DC output for sensors, cell modem, and 5VDC regulator - a voltage meter scaled 0-5V from 10-18V for the MCU ADC - digital output for detection of battery (HIGH on AC, LOW on Battery Backup). Please send me a quote on this project for a Schematic, BOM and general board l...
Category: Contract Manufacturing       

a****egt
 [?]
Sign in to view client's details.
| a****egt
|    Canada
Fixed Price: $500 - $1,000   |  Posted: Aug 25, 2015  |  Ends: 8d, 15h  |   15 Proposals
I need a agent or something too find me a good supplier that manufactories aluminium facade scaffoldings for a good price. i want a long term relationship with him . We can discuss the price for what you get when we have found the supplier. See photos atachment.
Category: Contract Manufacturing       

s****ayn
 [?]
Sign in to view client's details.
| s****ayn
|    Norway
Fixed Price: $1,000 - $5,000   |  Posted: Aug 25, 2015  |  Ends: 23d, 7h  |   14 Proposals
We are looking for a sourcing expert based in Shenzhen who can help source electronic components/LEDs/ semiconductors. Bilingual. Chinese/English. Opportunity for long term cooperation. Please only bidders who are local in Shenzhen area.
Category: Contract Manufacturing       
Skills: Purchasing Management       
Preferred Location: Eastern Asia

S****ing
 [?]
Sign in to view client's details.
| S****ing
|    United States
Fixed Price: Less than $500   |  Posted: Aug 24, 2015  |  Ends: 4h, 50m  |   34 Proposals
With a provisional patent there is a need to get not only CAD drawings but either a working prototype or a 3D printer rendering to work with on the various case designs. Further details after a NDA is signed.
Category: Mechanical       

S****013
 [?]
Sign in to view client's details.
| S****013
|    United States
Fixed Price: Less than $500   |  Posted: Aug 24, 2015  |  Ends: 8d, 4h  |   8 Proposals
I have a set of Plumbing Plans to which I need you to add "Central Heating" system, using Radiators.
Category: Mechanical       
Skills: Mechanical Engineering       

O****aLA
 [?]
Sign in to view client's details.
| O****aLA
|    United States
Fixed Price: Not Sure   |  Posted: Aug 24, 2015  |  Ends: 7d, 16h  |   6 Proposals
Calculate energy savings arising from installing zone valves to a multistory, multi tenanted office building. We would be going from two variable temperature radiator circuits (North & South) fed from fixed speed pumps. Going to 2 port zone valves on each floor and introducing speed control to the pumps. More detailed information available for the chosen candidate.
Category: Mechanical       

M****yne
 [?]
Sign in to view client's details.
| M****yne
|    United Kingdom
Fixed Price: $100 - $150   |  Posted: Aug 21, 2015  |  Ends: 4d, 22h  |   2 Proposals
Parametric analysis of Solidworks flow simulation are to be carried-out using flow simulation API, the main idea is to edit already generated codes in VB 6.0 into VB.net or C++ (prefeably C++) , a plugin in terms of fluid codes (using codes already generated in C++ for navier-stokes momentum equation) should be embedded into the solidworks flow simulation environment), the VB 6 codes are able to do the following: 1. Change different impeller types used for the study 2. vary fluid height in the mixing vessel 3. Varying impeller rotational speed 4. Vary impeller distance from the bottom of the mixing vessel The plugin codes are written in C++, and its untended to be introduced into the mixing vessel as an external fluid and different results ar intended to be generated from the simulation that would determine which impeller gives better homogeneity and at what impeller distance this should be achieved. My system config and software : Win 8, 64 bit, solidworks 2015 and MS visual s...
Category: Mechanical       

p****geo
 [?]
Sign in to view client's details.
| p****geo *
|    Nigeria
Fixed Price: Not Sure   |  Posted: Aug 21, 2015  |  Ends: 4d, 16h  |   14 Proposals
I need and a engineer who can make a design and blueprint for a small piece of hardware that projects weather, time, reminder, etc on to a wall that the user sets from his or her computer. I have made some sketches for the product the more detail the better.
Category: Mechanical       

c****lon
 [?]
Sign in to view client's details.
| c****lon
|    United States
Fixed Price: Not Sure   |  Posted: Aug 20, 2015  |  Ends: 4d, 4h  |   20 Proposals
Qualified estimators, civil engineers & quantity surveyors required to do costing on commercial & domestic construction plans.
Category: Contract Manufacturing       

R****azp
 [?]
Sign in to view client's details.
| R****azp
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 20, 2015  |  Ends: 3d, 22h  |   41 Proposals
I wanted to know how well you are with mechanical engineering and 3D design, I have a product idea that I need some help creating. I have a general idea as to how I would like to have it, but need someone with more of an engineering background to maybe give me some ideas. Please get back to me as soon as possible. Dilan
Category: Mechanical       

J****als
 [?]
Sign in to view client's details.
| J****als
|    United States
Fixed Price: Less than $500   |  Posted: Aug 19, 2015  |  Ends: 2d, 23h  |   3 Proposals
Looking to have a stroller designed, with several accessories, radio, usb, cooler, etc.... We want something like the design pictures included directions blk/wht. We have base stroller model pictures in attachment. A plus if you have worked on similar projects. Message for more details.
Category: Mechanical       

u****001
 [?]
Sign in to view client's details.
| u****001
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 18, 2015  |  Ends: 76d, 20h  |   11 Proposals
Seeking mechanical engineer with 3D modeling ability to help refine the development of a life-size robot that walks without motors or electricity. You can see the first robot prototype walking without motors or electricity at   [obscured]  
Category: Mechanical       

J****lyn
 [?]
Sign in to view client's details.
| J****lyn *
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job