Save this Search
     
Sort by:
  • Posted Date
Posted: Within 3 days
Fixed Price: Not Sure   |  Posted: 1h, 5m ago  |  Ends: 14d, 22h  |   0 Proposals
I am looking for experienced professional who is expert in weld design for design & analysis of following: 1. Weld design for joining 2 pipes of 2000 mm inner dia with 20 mm thickness. Pipes made of Mild Steel conforming to IS 2062 grade steel and manufactured as per IS 3589. The edge of pipes will be bevelled from outside suitable for V butt weld of 60 degree. The length of one pipe is 12 mtr. and weight is 12 MT. 3-4 pipe joints will be fit-up (Root Weld) in line, which means on root weld joint there will be weight of 3-4 pipes. 2. Welding procedure - Manual Metal Arc Welding (Stick Welding) 3. Suitable grade of electrode. 4. Number of weld run like root, hot pass, filler runs and capping (ID & OD). Also specify current ampere of welding machine at which each weld run is to be done. 5. All field pipe joints must clear UT & DPT test. 6. No. of electrodes required per joint? 7. Welding Procedure Specification (WPS) 8. Procedure for removal of carbon. 9. Time require for wel...
Category: Other - Engineering &...       

u****ted
 [?]
Sign in to view client's details.
| u****ted
|    India
Fixed Price: Less than $500   |  Posted: 3h, 55m ago  |  Ends: 14d, 20h  |   6 Proposals
three assignments 1)15 math questions from the textbook 2) 2 math questions from the professor 3) summary of articles/sections from the textbook/reflection
Category: Other - Engineering &...       
Skills: Mathematics       

d****618
 [?]
Sign in to view client's details.
| d****618
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 7h, 44m ago  |  Ends: 14d, 16h  |   3 Proposals
Looking for a person who is experiencing with HVAC load calculations, Title 24 drawing duct system design and layout for new and add on systems. The right person must be familiar with California Title 24 requirements, Energypro and building permit requirements for new or add-on HVAC systems.If you have this experience, please contact me ASAP..
Category: Mechanical       

C****cal
 [?]
Sign in to view client's details.
| C****cal
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 44m ago  |  Ends: 14d, 15h  |   4 Proposals
Aeronautical engineer or the like, who is very proficient with Soldworks or similar software. I have a few variation of a wind turbine design that I would like to have an air flow analysis done of four designs and an animation presentation of the final design. If I can afford it, I may add animations of the middle steps also, but for sure there will be at least one animation needed for presentation of the project which shows the design in action. If interested you will be required to sign a NDA. Please contact for specifics so you can prepare an estimate.
Category: Other - Engineering &...       
Skills: SolidWorks, Autodesk       

M****Bob
 [?]
Sign in to view client's details.
| M****Bob
|    United States
Fixed Price: Less than $500   |  Posted: 9h, 14m ago  |  Ends: 29d, 14h  |   2 Proposals
I would like an app created in appery.io. This app should operate just like cargomatic.   [obscured]  /
Category: Other - Engineering &...       
Skills: Manufacturing Design, Electronics       

k****ett
 [?]
Sign in to view client's details.
| k****ett
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 37m ago  |  Ends: 14d, 14h  |   1 Proposal
I am a graduate student doing research in the pet care industry. I would like to get a sense of volume of pet providers in top US cities. Looking for someone who can scrape 2 platform websites (Dogvacay.com and Rover.com) weekly. Would like to get some quotes and experience backgrounds. Thank you! Your qualifications: - A work style that is extremely detail oriented - A complete Elance profile - References or an established reputation on Elance preferred
Category: Other - Engineering &...       

r****329
 [?]
Sign in to view client's details.
| r****329
|    United States
Fixed Price: $50 - $100   |  Posted: 12h, 43m ago  |  Ends: 14d, 11h  |   3 Proposals
The flow patterns of different Impeller types (axial,radial impeller or mixed flow impellers) should be solved from the Navier-stokes equation. A GUI should be generated with matlab where all boundary conditions for the mixing of fluid in a vessel are input and the flow generated are displayed in plots for any impeller chosen. D/T i.e ratio of impeller diameter to vessel diameter should be in the range of 0.3-0.5. the containing vessel has 4 baffles
Category: Mechanical       

p****geo
 [?]
Sign in to view client's details.
| p****geo *
|    Nigeria
Fixed Price: Less than $500   |  Posted: 13h, 46m ago  |  Ends: 14d, 10h  |   4 Proposals
I'm looking to go on the show shark tank and I need a prototype made for an idea I have that is very similar to a hole puncher. I have a 3d design but I'm looking to alter it slightly for efficiency. It has to work... Looking for someone friendly and hard working that I can forge a relationship with for all of my inventions...
Category: Mechanical       
Skills: Manufacturing       
Preferred Location: United States

h****mmy
 [?]
Sign in to view client's details.
| h****mmy
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: 15h, 30m ago  |  Ends: 14d, 8h  |   1 Proposal
I have cc3200 launch board plus audio booster pack I need to play wav file from flash to the speaker
Category: Other - Engineering &...       

w****ron
 [?]
Sign in to view client's details.
| w****ron
|    Israel
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 17m ago  |  Ends: 14d, 7h  |   1 Proposal
Large chip handling system requires city permit in LA county. Looking for consulting on mechanical, building permit requirements Needs to be located in Southern California and familiar with the LA county Building & Safety Division/Mechanical Section
Category: Mechanical       

h****ngg
 [?]
Sign in to view client's details.
| h****ngg
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 44m ago  |  Ends: 14d, 7h  |   2 Proposals
New Product - Project Engineer (Must be in the Greater Toronto, Ontario Area) Reporting directly to the CTO, the Project Manager is responsible for ensuring the manufacture of a new water recycling product. The Project Manager will support and manage the development of company?s product from prototype to its introduction into the market. The manager will ensure product design for manufacturability and is responsible for integration of all new design concepts into production. Job Functions and required Knowledge & Skill: Degree or Diploma in Mechanical or Chemical Engineering Strong knowledge in rotational and injection molding A minimum of 3 years experience in manufacturing, production and assembly Strong 3D modeling skills Proficient with Solid Works Background in plastic part design Background in water and waste water treatment is preferred Demonstrated ability to take preliminary designs from concept to integration and into production Define, deliver and track project timeli...
Category: Other - Engineering &...       
Preferred Location: Canada

m****les
 [?]
Sign in to view client's details.
| m****les
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 53m ago  |  Ends: 14d, 6h  |   14 Proposals
Hello, We are looking for an Estimator for an on-going position. In general, this person will be responsible for completing takeoffs and providing back quantity and descriptive information. We will provide a format for the data collection (excel), and will provide a pre-amble for each project that identifies the specific needs of that project. Quantity of drawings will range from 100 to 1000. Accuracy is of paramount importance, as is turn around time. We are located in GMT -6:00 time zone. It is our hope that we will be able to provide drawings during our daytime work hours and have the takeoffs completed and returned to us by the following morning. We will provide an initial project to complete asap, and then new projects will be provided on an on going basis (though with no guaranteed frequency). You must be able to complete on-going work as needed. Please reply with proposal and any questions. Thank you.
Category: Other - Engineering &...       

N****int
 [?]
Sign in to view client's details.
| N****int
|    Canada
Fixed Price: Not Sure   |  Posted: 19h, 12m ago  |  Ends: 14d, 4h  |   4 Proposals
I have 10 rainfall rates in "mm" so i want to calculate the rainfall in "mm/hr" for different percentages of average year (1%, 0.1%, and 0.01%).
Category: Other - Engineering &...       

a****deq
 [?]
Sign in to view client's details.
| a****deq
|    Malaysia
Fixed Price: $1,000 - $1,500   |  Posted: Aug 04, 2015  |  Ends: 13d, 21h  |   3 Proposals
We need to develop a FPV based optical guidance system, something similar to this (  [obscured]  /watch?v=G_xtmnZXWhU). Details will be discussed on contact.
Category: Other - Engineering &...       

a****ski
 [?]
Sign in to view client's details.
| a****ski *
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 04, 2015  |  Ends: 13d, 21h  |   11 Proposals
I am looking for a mechanical engineer who would be able to embed a electronic weight sensor into the handle of a suitcase. We want someone to demonstrate the feasibility of this concept mechanically and to be able to tell all the details of the design.
Category: Mechanical       

k****169
 [?]
Sign in to view client's details.
| k****169
|    Hong Kong SAR, PRC
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 04, 2015  |  Ends: 13d, 21h  |   2 Proposals
I need a front for a database process that I have. It needs to be a slick front that opens onto further windows with selection button/options. It needs to connect to my process which is access/sql based.
Category: Other - Engineering &...       
Skills: SQL, access       

o****ypj
 [?]
Sign in to view client's details.
| o****ypj
|    Korea, Republic of
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 03, 2015  |  Ends: 13d, 12h  |   1 Proposal
Apply here if you're a manufacturer and you can develop a soft good prototype. This is a unique project and requires high competency in soft good production. This is strictly soft good project.
Category: Other - Engineering &...       

M****123
 [?]
Sign in to view client's details.
| M****123
|    Nigeria
Fixed Price: Not Sure   |  Posted: Aug 03, 2015  |  Ends: 13d, 8h  |   11 Proposals
I need to have a samples created based on a design that my team has developed. I will supply the technical documents (gerber, BOM and layout, etc.) for the product. These boards will be used of the development/testing and ultimate the baseline for the end product. The ESP8266EX is the WiFi SoC that is the foundation of the design.
Category: Mechanical       

i****er1
 [?]
Sign in to view client's details.
| i****er1
|    United States
Fixed Price: Not Sure   |  Posted: Aug 03, 2015  |  Ends: 13d, 8h  |   10 Proposals
I have a patent on an automotive product. I have to run some tests and I need a licensed engineer to convert my data from horsepower to gas mileage.
Category: Other - Engineering &...       
Preferred Location: United States

B****nal
 [?]
Sign in to view client's details.
| B****nal
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 03, 2015  |  Ends: 13d, 6h  |   3 Proposals
Hello, I am currently seeking constiruction professionals to carry out quantity surveying measurement on a freelance basis. The individual must be competent in construction measurement and familiar with SMM7 and NRM2. The individual must have their own professional indemnity insurance with a cover of 1miilion. If you do not have this we may contribute towards the cost. Please ensure you can obtain this prior to applying. You must be able to speak good English with the ability to Answer queries regarding your measurment. Please only apply if you are able to fulfil the above. Please advise your rate and capacity. Kind Regards Harry
Category: Other - Engineering &...       
Preferred Location: Eastern Europe, India/Southern Asia, Eastern Asia, Middle East & Central Asia

M****tUK
 [?]
Sign in to view client's details.
| M****tUK
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Aug 03, 2015  |  Ends: 13d, 5h  |   0 Proposals
Dear Developer, Our company needs a custom hologram which has a foot print size of 9mm X 30 mm The hologram should have a design and made out of material which can store frequencies. We would like to have a short conversation with your experts in this matter. We are looking forward to working with you. Sincerely, David Zulasky
Category: Other - Engineering &...       
Skills: Embedded Systems, Quantum       

d****sky
 [?]
Sign in to view client's details.
| d****sky
|    United States
Fixed Price: Not Sure   |  Posted: Aug 03, 2015  |  Ends: 13d, 3h  |   6 Proposals
Hi All I m looking for someone who can help me customize an existing Smartphone PCB to meet my requierements
Category: Other - Engineering &...       

h****ana
 [?]
Sign in to view client's details.
| h****ana
|    Kenya
Fixed Price: $500 - $1,000   |  Posted: Aug 02, 2015  |  Ends: 12d, 14h  |   8 Proposals
I need plans, detailed instructions, bill of materials, and a supplier list from an experienced CNC Router/Milling machine builder for a custom sized accurate 3 axis CNC running Mach3 to mill foam plugs and prototypes. The machine should have at least a 3m x 2m x 1m cutting area. Please see the pictures for similar items that have been constructed. The total cost of the build should be well under $10,000 and ideally around $4,000. The final plans for the machine should be FEA stress and fatugue testing, aerodynamics, motion and lifepan tests. The pay for this job will largely depend on the experience and portfolio of the engineer.
Category: Mechanical       

d****eii
 [?]
Sign in to view client's details.
| d****eii
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-3 months  |  Posted: Aug 02, 2015  |  Ends: 12d, 12h  |   2 Proposals
we represent one of indian system house who can revamp or built new automation system , offer new PLC from siemans, GE, ABB, parker at a competitive rates. we need you should identify potential customer and and work as free lancer to bring in sales revenue my company. can also supply spares of new and old pls of any brand at good price. expecting to work for us minimum 16 hours per week, can offer fixed salary and incentive based on sales. enclosed find the company profile which we are sole agent in indonesia and singapore.
Category: Other - Engineering &...       
Preferred Location: Singapore

e****van
 [?]
Sign in to view client's details.
| e****van *
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job