Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $350 - $550   |  Posted: 2h, 3m ago  |  Ends: 14d, 20h  |   3 Proposals
I need help finishing the HVAC layout and sizing for an approximate 3,000 s.f. medical office. I will also need plumbing and, electrical design finished. Some of the layout work is completed..
Category: Mechanical       
Skills: AutoCAD, Mechanical Engineering       

V****014
 [?]
Sign in to view client's details.
| V****014
|    United States
Fixed Price: About $750   |  Posted: 2h, 8m ago  |  Ends: 14d, 20h  |   1 Proposal
Revise plumbing for restaurant bar. Provide some plumbing and misc. work on a fitness project approximately 5,000. S.F.
Category: Mechanical       

V****014
 [?]
Sign in to view client's details.
| V****014
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 3h, 3m ago  |  Ends: 14d, 19h  |   0 Proposals
we need a part time plc programmer and automation designer for industrial equipment. you must be available to visit the office in downtown toronto
Category: Electrical       

j****134
 [?]
Sign in to view client's details.
| j****134
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: 5h, 23m ago  |  Ends: 14d, 17h  |   1 Proposal
Hello, We're looking for a product designer who know how to work with Oled display, bluetooth and helping us complete a product design The product would be a circular shaped screen which would connect to the mobile via bluetooth and can be controlled via a smart phone We can't share any further information till the candidate is selected. The project would start within 2 weeks and a contract would be signed with the individual. So please share your work experience and projects you've done. Samples of your previous work would be great including a resume and website of possible. The project requires the candidate to be in San francisco, California or around the bay area. Thanks
Category: Product Design       
Preferred Location: United States

n****ekh
 [?]
Sign in to view client's details.
| n****ekh
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 17m ago  |  Ends: 14d, 16h  |   3 Proposals
A 4,000 square food addition to an existing warehouse is being add. Would like recommendations on Mechanical, plumbing, and electrical systems. Drawings would also be required. Revit preferred, autocad acceptable, Its a plus if licensed in state of Illinois, United States
Category: Mechanical       
Preferred Location: United States

d****mek
 [?]
Sign in to view client's details.
| d****mek
|    United States
Fixed Price: $30 - $50   |  Posted: 15h, 43m ago  |  Closed  |   6 Proposals
I want components for PCAD 2004, the components should be added to a library and consist of - component (Schematic symbol and PCB Footprint) for the following parts: Part Number: 1) L6924D013TR 2) LIS2DHTR 3) SC189ZSKCT-ND 4) ATSAM4S8BA-AUR 5) Fibocom g510 6) LS2003H 7) DPAF0S00 8) 104168-1620 9) MCP16311-E/MS 10) 897-43-005-00-100001 Datasheets will be provided to work from.
Category: Electrical       
Skills: Electrical Engineering, Electronics       

t****nas
 [?]
Sign in to view client's details.
| t****nas
|    South Africa
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 21h, 18m ago  |  Ends: 2d, 2h  |   4 Proposals
I am developing a product and need a discussion with an EE to discuss an MP3 type device. Depending on the discussion I may need an EE to develop the 3D drawing of circuitry and help develop the prototype and cost out production. I would think the initial call would be an less than an hour, but I will pay an hourly fee. Great way to make a quick buck and get a good review.
Category: Electrical       
Preferred Location: North America

L****oup
 [?]
Sign in to view client's details.
| L****oup
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 21h, 23m ago  |  Closed  |   2 Proposals
I need a mechanical designer to finish our HVAC and Plumbing plans for us very fast and effectively. You need to be very experienced in using Revit and central files and this will be Revit 2013. There are 4 buildings that are involved. We need very little mistakes in these drawings. You should be familiar with US units. Here is a list of items you will complete: Adding Hose Bibbs to buildings and add associated plumbing Add any applicable details Remove sections tags that are not referenced. In plumbing schedule specify the Check the drawings, make revisions as required. On Kindergarten building, remove hot water from classroom and restroom sinks. Let me know if you have questions on anything. This needs to be completed by Wednesday.
Category: Mechanical       

****
 [?]
Sign in to view client's details.
| Client
|    United States
Fixed Price: Not Sure   |  Posted: 21h, 55m ago  |  Ends: 14d, 1h  |   10 Proposals
interested in contracting out with a design firm to help come up with 3d model/CAD and then prototype of watch bands for the Apple Watch band strap I own a watch company that has watches with stone faces (plugandfeather.com) Interested in potentially starting with bands that have links made out of stones
Category: Product Design       

s****007
 [?]
Sign in to view client's details.
| s****007
|    United States
Fixed Price: Not Sure   |  Posted: Mar 02, 2015  |  Ends: 13d, 22h  |   11 Proposals
Hello, My name is Robert, I am looking for individuals or companies to help design a custom raspberry pi or arduino pid temperature controller. We are creating our own brand essential oil vaporizer but do not like the current chinese pid controller boxes on the market. We need this part to help build our own enail   [obscured]  /?gws_rd=ssl#q=enail The controller Operating voltage: 120V/240V AC. Maximum 5 Amp Coil connection: XLR 5 Pin Some programming and control needs for micro controller keep temperature plus or minus a few degrees timed shut down after no active use temperature range of 0-1000 F We are open minded to the design of the entire project as we need Custom modular box that can connect more than one box unit   [obscured]  -nail.org/EnailParts is most the parts needed From ssr relay. pid controller, case, switches and so on. The pid controller and the microcontroller is the most important part in that i need the cheapest highest quality design that will...
Category: Electrical       
Preferred Location: North America, Eastern Europe, Eastern Asia

T****ng1
 [?]
Sign in to view client's details.
| T****ng1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 02, 2015  |  Ends: 13d, 21h  |   8 Proposals
I am building a robotic lawn mower. Like many other robotic lawn mowers, this will likely use a perimeter wire to detect the edge of the lawn, but I am also interested in other approaches that could work here. This is a hourly job because I'm not yet sure what is possible, so would like to start with a feasibility analysis and go from there. The general milestones I expect for each approach are: 1. Discuss possibilities. 2. Agree to milestones. 3. A short summary of the trade-offs available. I'm mostly interested in the feasibility of the approach, the cost per unit, the power used, and how accurately we would be able to detect the edge of our cutting area. (1-2 pages.) 4. Agree to trade-offs. 5. A deep cost analysis of how much this would cost per unit and to develop. (1 page.) 6. A circuit design for this approach. 7. Any support (such as firmware) needed. 8. A PCB layout for this design. The system currently is using 6V batteries, and 5 volts for the electronics and is based...
Category: Electrical       

p****cts
 [?]
Sign in to view client's details.
| p****cts
|    United States
Fixed Price: Not Sure   |  Posted: Mar 02, 2015  |  Ends: 13d, 18h  |   18 Proposals
Position Summary: We're looking for a tinkerer, someone who is passionate about coding and lives to solve technical challenges. You should be obsessed with keeping your code neatly documented, excited by improvements in performance/efficiency/reliability, comfortable with ambiguity, and driven to make things work. You'll be working with custom-built controller boards and robotic prostheses, so knowing your way around a circuit is a must and past experience in robotic control is a huge plus. While decades of work experience is not necessary, you should be comfortable with documenting your design process, be willing to operate under a strict quality system, and be prepared to communicate back-and-forth with our engineering team. What you'll be doing: ? Designing and developing embedded systems software and hardware for next-gen prosthetic limb control devices ? Testing, troubleshooting, and debugging embedded systems ? Working closely with a team of software and hardware engineer...
Category: Electrical       

r****iki
 [?]
Sign in to view client's details.
| r****iki
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Mar 02, 2015  |  Ends: 13d, 16h  |   2 Proposals
I am looking to get a few things quoted before moving on to the actual development phase. First, here is a description of what I need... PRODUCT: Soundproof drum mat designed to significantly reduce decibel levels put out by an acoustic drum kit Main benefit: Achieve results of a soundproofed room in a drum mat (in other words, the highest level of soundproofing possible) DESCRIPTION: The idea was to develop a mat or platform that your entire drum kit would sit on. Measurements: 6 - 1/6 ' x 5' (length x width of my drum kit) Height / thickness doesn't matter and depends on the necessary layers of soundproofers needed to achieve the results Like standard drum mats it should be - Mobile - Easy to set up - Durable (in fact more durable than standard drum mats) - Protects drums - Slip proof (for you and your drums) Please see the product research I had done for more information, plausibility, and ideas. And please ask questions as needed. Before moving forward, please tell m...
Category: Product Design       

T****zur
 [?]
Sign in to view client's details.
| T****zur
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: Mar 02, 2015  |  Ends: 24d, 14h  |   7 Proposals
Sviluppo di una scheda che trasmetta su onde convogliate (rete elettrica domestica 220 V) 2 input digitali (on/off) e abbia due output digitali. La scheda Ŕ indirizzabile ed interrrogabile da PC, con possibilitÓ di inviare comandi ad ogni singolo indirizzo. Necessita solo il progetto elettrico..
Category: Electrical       

r****i46
 [?]
Sign in to view client's details.
| r****i46
|    Italy
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 02, 2015  |  Ends: 13d, 11h  |   5 Proposals
I need a CNC file - in Artcam for 2 countertop Bookmark displays. I am attaching photo and similar design drawing for Gift Cards. Bookmarks are 1.5" wide by 7" high. I need one display to hold 6 bookmarks and one display to hold 12. I would like the dividers NOT to protrude beyond the bottom faceplate so I can engrave or print on that piece. Material to be made from Standard 6mm Baltic Birch Plywood and fabricated with a CNC Router Please ask if you need more information
Category: Product Design       
Skills: 2D Design, CNC Programming       

w****rnh
 [?]
Sign in to view client's details.
| w****rnh
|    United States
Fixed Price: $30 - $50   |  Posted: Mar 02, 2015  |  Closed  |   1 Proposal
check file check filecheck filecheck filecheck filecheck filecheck filecheck file check filecheck filecheck filecheck filecheck filecheck file
Category: Mechanical       
Skills: Mechanical Engineering       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Fixed Price: $150 - $350   |  Posted: Mar 01, 2015  |  Ends: 13d, 2h  |   10 Proposals
Ok I have in mind a device that I have a vision for. The technology, potentially, could be used for many applications. I have one idea right now that would form the basis of design. **note this product involves electronic components such as market available GPS module / antenae. I am willing to pay to get a very good product, however it will be broken into sections, each with various weighting in progress payments. Meaning, no point paying the full amount only to find it isn't feasible. So I propose the following overall breakdown : 1. Investigate Phase - Investigate the components I propose or suggest alternates, with regards to achieving the specified outcome. Investigate any patents (freedom to operate), or potential for patenting this idea. Provide feedback as to whther the idea will work from a technical standpoint, and approximate costings of components, with basic design and manufacture approach. (In a nutshell, can my vision become reality with components currently availabl...
Category: Electrical       

N****L83
 [?]
Sign in to view client's details.
| N****L83
|    Australia
Fixed Price: Less than $500   |  Posted: Mar 01, 2015  |  Ends: 13d, 1h  |   5 Proposals
I am looking for someone to help me source Chinese electronics (headphones) manufacturers so I can find someone to produce my product. Please respond if you have experience with this.
Category: Product Design       
Skills: Product Design, sourcing       

j****ham
 [?]
Sign in to view client's details.
| j****ham
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: Mar 01, 2015  |  Closed  |   3 Proposals
Ok I have in mind a device that I have a vision for. The technology, potentially, could be used for many applications. I have one idea right now that would form the basis of design. **note this product involves electronic components such as market available GPS module / antenae. I am willing to pay to get a very good product, however it will be broken into sections, each with various weighting in progress payments. Meaning, no point paying the full amount only to find it isn't feasible. So I propose the following overall breakdown : 1. Investigate Phase - Investigate the components I propose or suggest alternates, with regards to achieving the specified outcome. Investigate any patents (freedom to operate), or potential for patenting this idea. Provide feedback as to whther the idea will work from a technical standpoint, and approximate costings of components, with basic design and manufacture approach. (In a nutshell, can my vision become reality with components currently availabl...
Category: Electrical       

****
 [?]
Sign in to view client's details.
| Client
|    Australia
Fixed Price: About $20   |  Posted: Mar 01, 2015  |  Ends: 12d, 22h  |   5 Proposals
Must have EXCELLENT ENGLISH SPEAKING/WRITING SKILLS. Please be experienced in all aspects of international trade, including sourcing, customizing for private label, packaging, & shipping. This job has a fixed fee to see ONE PRODUCT successfully negotiated, prepped for private label, sample shipped, and up to the point of securing a large order. I will give you an exact product to source. I only want the product submitted, no substitutes. This job will lead to multiple repeat jobs based on your performance and sourcing speed. must have the ability to take good pictures and communicate in a timely manner.
Category: Product Design       
Preferred Location: China

V****cha
 [?]
Sign in to view client's details.
| V****cha
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Mar 01, 2015  |  Ends: 4d, 22h  |   1 Proposal
Hello, I am a cosmetic product developer launching my own line of products. I will start with a set of color products for which I need assistance developing. Working with various skincare contract labs in my career, I am totally familiar with the the product development cycle. I work a full-time job, so what I am looking for is a chemist to do the initial development work, build formulas and create prototypes for my launch in June. At that point, if you have the capabilities to produce a small quantity of samples, we can work together on that. If not, I may take the formulas to a contract lab with a low minimum order. YOU MUST BE ADEPT WITH COLOR DEVELOPMENT. You are: -reliable -experienced in color chemistry -Familiar with the color product market Although my budget is limited in this phase of the project, we can discuss a price and timeline that works for both of us.
Category: Product Design       

a****uve
 [?]
Sign in to view client's details.
| a****uve
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Mar 01, 2015  |  Ends: 12d, 19h  |   19 Proposals
Overview: this will be a temperature, humidity and moisture monitoring system. The system will consist of one main unit and multiple sensors. The main unit will be capable of receiving data from the sensors, storing the data it receives from the sensors and transmitting the data it receives from the sensors to a smartphone app. The system will also consist of sensors that will measure the temperature of a room, the relative humidity of a room and the level of moisture present in a material such as a cardboard box. The sensors will be able to transmit this information on an hourly based to the main unit. A user will be able to access the main unit via a smartphone app for both IOS and Android and view the data that is being stored in the main unit. Both the main unit and the sensors must have an identification number so that it can be uniquely identified when being use in conjunction with others. Example; I will have more than one of these systems running in separate locations. While aw...
Category: Product Design       
Skills: Electronic Design       

s****kus
 [?]
Sign in to view client's details.
| s****kus
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job