Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 19m ago  |  Ends: 14d, 22h  |   0 Proposals
want to create a very simple 5" tall by 8" long (estimated) canvas pouch. It would carry 4 bars of surf wax, with several 3 outside pockets to accommodate a wax comb, a fin key and a tube of sunscreen. This bag would be used by a surfer to carry the essentials. Either left in their car or carried to the beach.
Category: Product Design       

m****her
 [?]
Sign in to view client's details.
| m****her
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 1h, 30m ago  |  Closed  |   2 Proposals
I have a five star task seating base that I've drawn up in Rhino that needs to be fixed for a presentation model. I need the model cleaned up with certain fillets applied (in solid works). I will include my original curves, the five star base without any fillets and a rough section that you can use for fillet example. Don't worry about any underneath wall thickness/ribs. No one will see that. Deliverables will be. Five star base fixed in Solidworks and fillets applied (inches/decimal). The main cylinder will have very tight fillets (.0156") and the five legs will have (.0625"). The cylinder that rest on top of caster will also have a (.0156") fillet. Save it as both IGES and Solidworks I can't imagine it will take more than a few hours. I've provided a lot of data that should speed things up. I want to have it done by Monday if possible.
Category: Product Design       
Skills: SolidWorks       

g****ign
 [?]
Sign in to view client's details.
| g****ign
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 1h, 41m ago  |  Closed  |   0 Proposals
I have a five star task seating base that I've drawn up in Rhino that needs to be fixed for a presentation model. I need the model cleaned up with certain fillets applied (in solid works). I will include my original curves, the five star base without any fillets and a rough section that you can use for fillet example. Don't worry about any underneath wall thickness/ribs. No one will see that. Deliverables will be. Five star base fixed in Solidworks and fillets applied (inches/decimal). The main cylinder will have very tight fillets (.0156") and the five legs will have (.0625"). The cylinder that rest on top of caster will also have a (.0156") fillet. Save it as both IGES and Solidworks I can't imagine it will take more than a few hours. I've provided a lot of data that should speed things up. I want to have it done by Monday if possible.
Category: Product Design       
Skills: SolidWorks       

g****ign
 [?]
Sign in to view client's details.
| g****ign
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 5h, 37m ago  |  Ends: 14d, 18h  |   3 Proposals
We are looking for an experienced person whom is capable of reading blue prints, surveying product quantities, applying to excel sheets, cable takeoffs and installation time estimations. Required process: 1. Recieve daily RFQs from general contractors, plus daily search on provided websites, finding projects that we would be capable of bidding. 2. Extract bill of material, include wiring and other. 3. Estimate installation time, number of engineers required. Candidates must be able to have some tool skills Any cad software Any takeoff software Be able to read blue prints Knows how to use excel sheets We are looking for a long term relationship, if this works out. First we want to try it and see how it works.
Category: Other - Engineering &...       

2****ONS
 [?]
Sign in to view client's details.
| 2****ONS *
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 7h, 5m ago  |  Ends: 14d, 16h  |   3 Proposals
assembly process line your job is to design a factory floor layout to manufacture the assembly of a new type of system, a brief design was given , the designer should be able to state the requirement for assembly processes. the cost of the parts , the cost of the assembly branch manufacturing, how many employees require to produce the system. how long it will take to make one. how many employees will it take to create a whole factory for the system. the system on the brief is given as a basic concept to design , yet the new system will only be 12 meters high and the load required to lift shall only be 15kgs. the applicant will be paid on an hourly basis.
Category: Mechanical       

S****525
 [?]
Sign in to view client's details.
| S****525
|    United Kingdom
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 7h, 26m ago  |  Closed  |   0 Proposals
We are looking for an experienced person whom is capable of reading blue prints, surveying product quantities, applying to excel sheets, cable takeoffs and installation time estimations. Required process: 1. Recieve daily RFQs from general contractors, plus daily search on provided websites, finding projects that we would be capable of bidding. 2. Extract bill of material, include wiring and other. 3. Estimate installation time, number of engineers required. Candidates must be able to have some tool skills Any cad software Any takeoff software Be able to read blue prints Knows how to use excel sheets We are looking for a long term relationship, if this works out. First we want to try it and see how it works.
Category: Other - Engineering &...       
Skills: AutoCAD, Building Estimation       

2****ONS
 [?]
Sign in to view client's details.
| 2****ONS *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 24m ago  |  Ends: 14d, 14h  |   3 Proposals
We are looking for a website designer to create a website from scratch! We will give you three websites which we would like our website to be based on. It is crucial that you are the best of the best - we are a premium company and our page needs to reflect this. If you will not present a page like the below then DO NOT APPLY!   [obscured]     [obscured]     [obscured]   We require that you give a rough quote on the finished product.
Category: Electrical       

j****507
 [?]
Sign in to view client's details.
| j****507
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 11h, 29m ago  |  Closed  |   6 Proposals
Mechanical engineering in general(design and analysis). Advice in innovation, mechanical concept(find solutions to a mechanical problem ), hand calculation, Scilab script.
Category: Mechanical       

****
 [?]
Sign in to view client's details.
| Client
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 56m ago  |  Ends: 14d, 9h  |   11 Proposals
I have a drawing that I want prototyped. I am going to use it to cover with carbon fiber and create the final product. It consists of 5 parts, longest of which is 90 cms. Assembled, it looks like something in the attached image.
Category: Other - Engineering &...       

w****999
 [?]
Sign in to view client's details.
| w****999
|    Turkey
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 49m ago  |  Ends: 14d, 6h  |   6 Proposals
I am a biomedical engineer focused on biomechanics. This has to do with the mechanical parts of living things. This may include developing and making artificial limbs to analyzing people's gaits and improving it.
Category: Other - Engineering &...       

m****han
 [?]
Sign in to view client's details.
| m****han
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 24, 2015  |  Ends: 13d, 23h  |   9 Proposals
This is a device that will need to be designed and manufactuered. It's a parking sensor that will detect if a car is parked or not on the spot. Each device will be install on each spot in the garage. The device needs to have receiver and transmitter capabilities. The device will be transmitting to a receiver which will transmit to a server. Please egt with me as soon as possible to discuss further details. I do not expect any estimate until you understand the entire project. So please don't send any estimate for now. Thanks,
Category: Electrical       
Skills: Electronic Design, Embedded Systems       

k****ves
 [?]
Sign in to view client's details.
| k****ves
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 24, 2015  |  Closed  |   0 Proposals
Responsible for the startup, operation, maintenance, troubleshooting, and repair of mission critical power systems for banks, data centers, military installations, and hospitals.
Category: Electrical       
Skills: Electronics, Instrumentation       

J****Coy
 [?]
Sign in to view client's details.
| J****Coy
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 24, 2015  |  Closed  |   3 Proposals
hi I have a circuit built it in my lab and my supervisor need me to write the operation of this circuit. ( I need it during this weekend) prefer scientist operation. if you did it very well I can support you with others best wishes
Category: Other - Engineering &...       

y****eid
 [?]
Sign in to view client's details.
| y****eid
|    United Kingdom
Hourly Rate: $30 - $40 / hr   |  Duration: 7-9 months  |  Posted: Apr 24, 2015  |  Ends: 13d, 21h  |   3 Proposals
We are seeking candidates with design experience in envelope improvements and retrofits, as well as M/E/P systems in both the single- and multi-family residential environment. Candidates should have knowledge of energy efficient technologies associated with commercial/residential building systems to support energy efficiency program efforts, including design, development and delivery services. Ideal candidates should also have design management experience and the ability to coordinate the development of building plans, contracts, regulations and specifications. Position Responsibilities: ? Organize and execute sustainable design initiatives within the context of Mechanical, Electrical and Plumbing (M/E/P) systems. ? Provide design coordination and administrative oversight of all design phase activities. ? In concert with the Design Team, coordinate the development of the mechanical and electrical drawings with the architectural plan set for new and/or existing buildings. ? Assist with...
Category: Mechanical       

j****nin
 [?]
Sign in to view client's details.
| j****nin
|    United States
Hourly Rate: $10 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 24, 2015  |  Ends: 13d, 21h  |   12 Proposals
I need an engineer familiar with plastics to advise me on which material; plastic, polypropylene, or alternative will yield the qualities I need in terms of flexibility/rigidity for my product. I have CAD drawings, 3D Printed prototypes, and detailed docs explaining the product needs. I may need a slight redesign based on the material chosen, but need to be advised on what change would be relevant in order to keep the functionality and aesthetics of the product. The design needs to be able to be manufactured using bulk manufacturing techniques. I have more attachments and detailed docs than the one attached here, but would like to get in touch with someone prior to providing all intellectual property.
Category: Product Design       

a****kle
 [?]
Sign in to view client's details.
| a****kle
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 24, 2015  |  Ends: 13d, 17h  |   3 Proposals
I have an idea/design that requires a patent search. The technology is known but hasn't been applied to a specific product in the field of interest. I have searched for weeks and haven't found a product with this technology, but that doesn't mean it hasn't been patented. I need a person or firm that is familiar with the USPTO and can give recommendation if I should move forward in filing a patent. If the entity is helpful, I will enlist them to walk me through the design patent process. I am working on a shoestring budget. I am concerned about the quality of the search and want to spend my money wisely. Please give appropriate examples, templates on past patent searches, or explain your approach. If the technology is worth pursuing, I will need to file a provisional patent. I need a person with experience filing with the USPTO.
Category: Other - Engineering &...       

h****974
 [?]
Sign in to view client's details.
| h****974
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 24, 2015  |  Ends: 13d, 17h  |   1 Proposal
We are a leading company providing accessories for fishermen in northem Europe. We are looking for a manufacturer to produce polyesther gloves for us. The product will be in 100% polyesther. Best regards, Sebastien
Category: Other - Engineering &...       
Skills: Manufacturing       

s****ume
 [?]
Sign in to view client's details.
| s****ume
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 24, 2015  |  Ends: 13d, 15h  |   11 Proposals
We are looking for somebody able to define the electronic HW and SW for a caving lamp. The mechanical design and whole project is managed for other team members. The main features of the lamp are: - system complete by battery pack + encapsulated PCB + lamp (fixed on helmet) - lamp wide light (ambient) by use of one or several LED - spot light - battery pack - battery supervision by PCB - LED driver - different program modes - charging - computer connection for set up and management - benchmarking for reference: SCURION 1500 (  [obscured]  ) Attached some picture of the first prototype.
Category: Electrical       

p****ejo
 [?]
Sign in to view client's details.
| p****ejo
|    China
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 24, 2015  |  Ends: 13d, 15h  |   4 Proposals
I need to simulate a ball float using dynamic meshing.! The ball is very light and has buoyancy effect. with the boundary conditions of inlet and outlet pressures.
Category: Mechanical       

i****aud
 [?]
Sign in to view client's details.
| i****aud
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 24, 2015  |  Ends: 13d, 14h  |   5 Proposals
Hi -- I am interested in building a simple social app for Android and iOS that will complement our existing online web app (built in RoR). Here are basic screen shots of the app. Please submit Request for proposal with the following information: - Price quote - Length of time to develop the app - Links to revelant apps that you've built (that I can download from App Store and Play - 2 references - Resumes I will only respond to people who include the information. Thank you for your interest.
Category: Other - Engineering &...       

S****ght
 [?]
Sign in to view client's details.
| S****ght
|    Israel
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 24, 2015  |  Ends: 13d, 13h  |   0 Proposals
hello , i have a question about boundary coding and quadtree coding on a 8x8 gray scale image . where you have to represent the regions by these coding methods. Please apply only if you are ready to work now .
Category: Other - Engineering &...       

n****b_3
 [?]
Sign in to view client's details.
| n****b_3
|    India
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Apr 24, 2015  |  Ends: 13d, 7h  |   7 Proposals
Wind tunnel design for the 1/4 of the commercial aircraft and the calculations of each part of the design with dimensions and report
Category: Mechanical       

Y****ddy
 [?]
Sign in to view client's details.
| Y****ddy
|    Australia
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Apr 24, 2015  |  Ends: 13d, 7h  |   2 Proposals
Wind tunnel design for the 1/4 of the commercial aircraft and the calculations of each part of the design with dimensions and report
Category: Mechanical       

Y****ddy
 [?]
Sign in to view client's details.
| Y****ddy
|    Australia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job