Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 3 days
Fixed Price: About $20   |  Posted: Aug 26, 2015  |  Ends: 16h, 58m  |   10 Proposals
I need the already created (in EagleCAD) modifications to the pcb design. It is a PIC-based USB fan speed controller. Please check out the attached
Category: Other - Engineering &...       

s****hrt
 [?]
Sign in to view client's details.
| s****hrt
|    United States
Fixed Price: $20 - $30   |  Posted: Aug 23, 2015  |  Ends: 2d, 17h  |   1 Proposal
Please have a look at this research paper. I need to solve the differential equation 2.2 to 2.4 in matlab with the boundary conditions in finite difference method using newton iteration. I need results same as the plots shown in the figure 2 and figure 3(in the paper). thanks
Category: Other - Engineering &...       

z****ooo
 [?]
Sign in to view client's details.
| z****ooo
|    Pakistan
Fixed Price: Less than $500   |  Posted: Aug 22, 2015  |  Ends: 1d, 6h  |   6 Proposals
1. Objective: Create various scents for our household products such as hand soaps, dish soaps, all purpose cleaner and air fresheners. Fragrances are important factors for consumers' decision especially for hand soaps and air fresheners. We are working with a chemist to formulate the above products. However, we need a fragrance chemist to complete our products. 2. Skills and conditions required: Perfume experience Essential oil blending experience Fragrance chemist (for at least 3+ years) Knowledge about fragrance with natural ingredients Must have a lab setting so you can formulate different fragrances Must have easy access to variety of essential oils and other natural ingredients Fragrance using hydrosols, tinctures and other natural materials a plus. 3. Delivery required: You'll have to send us 15-20 fragrance samples. After we choose final fragrances for each product, you'll have to provide all the information about formulating methods (Step by step instructions) for b...
Category: Other - Engineering &...       

h****322
 [?]
Sign in to view client's details.
| h****322
|    United States
Fixed Price: Not Sure   |  Posted: Aug 20, 2015  |  Ends: 6h, 6m  |   4 Proposals
Looking for an experienced electronics engineer with experience in various display interfaces and protocols for designing an eDP Interface board for 5K Resolution LCD Display. The target display is LM270QQ!-SDA2 Specs can be found here:   [obscured]  /LM270QQ1-SDA2_LG%20Display_27.0_LCM_parameter_23491.html The interface board has to drive an input from a HDMI / Display Port to the eDP connector of the LCD Display. Please state your previous experience in similar projects when bidding.
Category: Other - Engineering &...       

i****r99
 [?]
Sign in to view client's details.
| i****r99
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 15, 2015  |  Ends: 2d, 13h  |   6 Proposals
i need to realize a circuit board with photocam that is activated with photocell and save image in sd card
Category: Other - Engineering &...       

c****llo
 [?]
Sign in to view client's details.
| c****llo
|    Italy
Fixed Price: Not Sure   |  Posted: Aug 15, 2015  |  Ends: 2d, 11h  |   5 Proposals
I looking for a project about carbon nanotubes or graphen or nanoparticals application To be studied by master students We have CVD- SEM- AFM for experimental technique if you can include it. Regards
Category: Other - Engineering &...       
Skills: Nanotechnology       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 15, 2015  |  Ends: 2d, 10h  |   1 Proposal
Hello all, we are eagerly looking for the best qualified Apparel tech pack / technical designer provider. The designs and samples are completed - mostly dresses and tops - we now need them translated into tech packs for production. We are Guangzhou, China and Hong Kong based. Please advise with direct contact information and thank you all in advance. Mervin Sealy
Category: Product Design       
Skills: Manufacturing Design       

m****aly
 [?]
Sign in to view client's details.
| m****aly *
|    United States
Fixed Price: $100 - $120   |  Posted: Aug 14, 2015  |  Ends: 2d, 3h  |   4 Proposals
It is an applied Mechanics research work which is aimed in determining the This project involves analysis of vibration and acoustic emission data measured on rolling element bearings. The measurements were taken under good and defective conditions and the objective of this project is centered on extracting the most sensitive parameters from the data to indicate the state of mechanical integrity of the bearing. All measured data would be given and it is expected to undertake the analysis with MATLAB.
Category: Mechanical       

y****thy
 [?]
Sign in to view client's details.
| y****thy
|    Nigeria
Fixed Price: Not Sure   |  Posted: Aug 14, 2015  |  Ends: 2d, 0h  |   9 Proposals
Mess produce wooden bowls with legs (Kava bowl) similar design to what's in the attached picture. 12" diameter and 6" height.
Category: Other - Engineering &...       
Skills: Manufacturing, RapidWorks       

M****ibe
 [?]
Sign in to view client's details.
| M****ibe
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 14, 2015  |  Ends: 1d, 23h  |   18 Proposals
I am seeking for a product design engineer who is confident with optics to work with my idea to create prototypes. Thank you for your time, Lindsey
Category: Product Design       

l****ley
 [?]
Sign in to view client's details.
| l****ley
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 14, 2015  |  Ends: 1d, 22h  |   22 Proposals
I am currently in the process of designing a rotational moulding machine I can design and sketch the actual machine myself however I need assistance with the following: Size of electrical motors to be used Gearing Size of shafts to be used I will provide information on what weights and speeds the machine should run at. I will also provide sketches. I can also provide videos showing similar machines in operation. I need the expertise and knowledge of a mechanical engineer to calculate motor sizes and shafts sizes, is this something that you would be interested in assisting with? I look forward to hearing from you. Kind Regards, Mark
Category: Mechanical       
Skills: Mechanical Engineering       

M****896
 [?]
Sign in to view client's details.
| M****896
|    Ireland
Fixed Price: About $300   |  Posted: Aug 14, 2015  |  Ends: 1d, 21h  |   5 Proposals
We just need someone to make this remote control ball. The ball needs to be 50 cm in diameter and capable of carrying a load of 10 kgs (excluding the batteries) while travelling with max speeds of 30km/hr . You just need to follow this instructables.   [obscured]  /id/Remote-Controlled-Basket-Ball-Robot/
Category: Mechanical       

a****ski
 [?]
Sign in to view client's details.
| a****ski
|    Canada
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Aug 14, 2015  |  Ends: 1d, 16h  |   9 Proposals
Looking for an experienced product designer for prototype design and software development to build a prototype from an existing design/concept. It is a product that synchs with mobile devices, tracks usage data, integrates with Bluetooth, and allows for charger access . The designer(s) must be familiar with app development, cellular service, product manufacturing materials, blue tooth technology, and software integration. If you have experience with prototyping with a fast turnaround rate, I would like to hear from you. Details and photos of my design will be shared when a freelancer has been selected. The freelancer must sign an NDA before beginning the project. Once the designer is selected, they will be provided with detailed drawings of the concept and a larger requirements description. Requirements as follows: Execute and sign NDA Must have excellent English writing and verbal skills. Create a professional 3D CAD model (to proper measurement scale) of the device Review ...
Category: Product Design       

A****014
 [?]
Sign in to view client's details.
| A****014
|    United States
Fixed Price: Less than $500   |  Posted: Aug 14, 2015  |  Ends: 1d, 15h  |   1 Proposal
I need help in this automotive project. The details are attached in the file below. Topic: Active Damping and Throttle Control in formula student in efficient and stable cornering. The attached file is sample to let you understand what kind of report we needed. Reply ASAP use simpack 9.7 to open the demo car......the main aim of reducing the throttle is to check or improving the stability of the vehicle in cornering.....and in the active damping you have to work on the suspensions of the vehicle.... sample models are within the documentation of simpack , in the help options. Check the help file While working in simpack amplitude of excitation must be zero, In order to work on active damping : Step 1:right click on tracks step 2: Activate track vehicle globals Step 3: Stifness vehicle damping. and work on the following things in Trottle control: Drive: 1.Velocity actual 2.Velocity desired 3.Actual input value 4Actual output value 5Actual value of funtion ========== Targets to ac...
Category: Mechanical       

l****mal
 [?]
Sign in to view client's details.
| l****mal *
|    India
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Aug 14, 2015  |  Ends: 1d, 14h  |   1 Proposal
Our company is George's General Repair, we are looking to hire some full time mechanics to handle our increasing work load. We are looking for a few passionate, driven individuals, that will up hold our shop's dedication to quality and customer service. Honesty, integrity, and diligence are a must have. (Abilities that we are looking for oil change - basic service, brakes/suspension/chassis, remove & install engine/transmission, diagnose CEL/electrical, change timing belt/water pump) Requirements for this job include: Ability to diagnose and repair any drive-ability concerns in gas powered car or light weight trucks Must have your own tools Must have at least three years of automotive mechanic experience Must have a valid NC state licence and clean driving record Please e-mail your resume along with three work references. We will look over these and get back with you if we would like to continue the process and bring you in for an interview.
Category: Other - Engineering &...       
Skills: Automotive Engineering       

G****air
 [?]
Sign in to view client's details.
| G****air
|    United States
Fixed Price: $500 - $1,000   |  Posted: Aug 14, 2015  |  Ends: 1d, 12h  |   3 Proposals
a 7 inch tablet with inbuilt receipt printer and credit card swipe. If you have anything particular, feel free to contact me at   [obscured]   Urgent requirement
Category: Product Design       
Preferred Location: North America, Western Europe, Eastern Europe, Eastern Asia, Africa

k****wal
 [?]
Sign in to view client's details.
| k****wal
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 14, 2015  |  Ends: 1d, 9h  |   51 Proposals
We are a company looking for a product designer to consistently help with ongoing product designs. You must use Solidworks so we can open and edit the files if needed. The first design project is to help design a date order egg storage container for the fridge. We have a full design brief which we will gladly discuss. I look forward to reviewing your portfolios and choosing the right person.
Category: Product Design       

t****gak
 [?]
Sign in to view client's details.
| t****gak
|    Australia
Fixed Price: Less than $500   |  Posted: Aug 13, 2015  |  Ends: 1d, 0h  |   17 Proposals
Need help with a very complicated loft. Must take a loft and blend it into a side wall so it disappears. Blend sketch 9 (part of loft 1) and sketch 20 (part of loft 3) into the highlighted blue wall. I will forward the SW .sldprt file when I award the job. Don't bid unless you are positive you can do the job. Must have SW 2015. Must complete the job by Monday at the latest. I need a quote on the total amount to do the job.
Category: Product Design       

C****llc
 [?]
Sign in to view client's details.
| C****llc
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Aug 13, 2015  |  Ends: 23h, 48m  |   30 Proposals
We are lighting manufacturers and need help developing products and projects from hand sketches from our designers English is a requisite to communicate with us and clients and vendors We are located in US in the East coast
Category: Product Design       

g****ive
 [?]
Sign in to view client's details.
| g****ive *
Fixed Price: $100 - $120   |  Posted: Aug 13, 2015  |  Ends: 23h, 9m  |   1 Proposal
The titile of my project is :Two dimensional modelling of sand production, using Finite volume to solve the governing equation and then use C++ to program.A C++ Visual code would be used to solve a 2Dimensional Navier stoke's equation in order to predict the critical drawdown pressure. I have been able to obtain the governing equation and discretise using finite volume.I was given a 1 dimensional problem of conduction using C++ to obtain the Temperature Distribution at a particular boundary conditions(Top and Bottom -Insulated, Left-Dirichlet, Right-Convective) and i was able to use c++ to show the temperature distribution of the rod. Now i have a 2Dimensional Navier stoke's equation which has the Energy equation,Momentum and Pressure Equation which i have to solve for a flow in a pipe and obtain the Temperature,U and V velocity, then the pressure distribution in the pipe. After solving the Navier stoke's equation , i would also need to incorporate the code to determine the critical dr...
Category: Mechanical       

y****thy
 [?]
Sign in to view client's details.
| y****thy
|    Nigeria
Fixed Price: Less than $500   |  Posted: Aug 13, 2015  |  Ends: 22h, 41m  |   2 Proposals
Hello I'm looking for someone who can design a slim crash response circuit. I would like for is to be able to run off 12V and have a GSM and an accelerator chip. It must have the ability to be connected to 5 sensors. once the sensor is moving faster than 25mpg and an accident is recognized the gsm chip must be to show location and text location. Must be programmable.
Category: Other - Engineering &...       
Skills: Circuit Design       

J****kes
 [?]
Sign in to view client's details.
| J****kes
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 13, 2015  |  Ends: 22h, 41m  |   13 Proposals
We are looking for a partner to help us develop a custom bottle shape and mold that will hold a range of 8 oz - 14oz of liquid. (the amount of liquid we put in will be somewhat dependent on the design and ability to fill at the manufacturing facility) The mold must aligns with the interests of a home coffee enthusiast and stand out on shelf at major retailers Key objectives: - Increase awareness on shelf - Differentiate from competition - Very obvious that this is a coffee related accessory - Premium look and feel Bottle can be any color and shape but top must be no less than a 22mm opening. Existing bottle is attached for reference.
Category: Product Design       

U****nds
 [?]
Sign in to view client's details.
| U****nds
|    United States
Fixed Price: Less than $500   |  Posted: Aug 13, 2015  |  Ends: 22h, 17m  |   8 Proposals
Searching some one who can design a circuit board that runs off a 12V power source . The board would receives a wireless signal and turn on three different light sources. Both the transmitter and receiver would work via Bluetooth. The transmitter would plug into a 12V wiring harness. I would like to be able to plug the the transmitter into my electric scooter and place the circuit into my reflective vest.
Category: Product Design       
Skills: Manufacturing Design, Electronics       

J****kes
 [?]
Sign in to view client's details.
| J****kes
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Aug 13, 2015  |  Ends: 21h, 54m  |   26 Proposals
My partner and I are looking to have some professional floor plans and exterior renderings done for an investment plan of a multi-unit apartment building. We are architectural neophytes, and don't need anything too complex, but just something to give investors an idea of our plans. We can provide simple diagrams to use as a framework. We will probably need 2 floor plans, and 2 exterior renderings.
Category: Product Design       

c****jez
 [?]
Sign in to view client's details.
| c****jez
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 13, 2015  |  Ends: 10h, 51m  |   12 Proposals
hello, i need to paint about 200k plastic part to silver every month. im looking for someone to do it in china (it will be shipped to you from ningbo (shaghai erea) ) please quote me the price for one piece and the lead time for 200k parts size is 40mm length, 20mm diameter attached photos. thanks itay
Category: Other - Engineering &...       

I****86h
 [?]
Sign in to view client's details.
| I****86h
|    Israel
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job