Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 3h, 3m ago  |  Ends: 14d, 20h  |   6 Proposals
A conceptual idea that requires product design experience to come up with the most practical / simple / commercially viable solution for a very common pain point. I have been trying to think of solutions and have some ideas but would like professional problems solvers / designers to assist. I would like to work with an experienced design form on this one so please do not apply unless you can demonstrate experience and have a solid portfolio to back it up. I can give more detail to those that give me a sense of confidence that they can help come up with an idea for a solution, then implement a potential design. No prototype at this stage. Price can be discussed as it will be very dependent on the suitability of the candidate and their ultimate outcome.
Category: Mechanical       

N****L83
 [?]
Sign in to view client's details.
| N****L83
|    Australia
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 5h, 33m ago  |  Ends: 14d, 18h  |   1 Proposal
Simulation of cold compaction process by Ansys , please for all details find attachment   [obscured]  /#!lo0lDQCC!m2s9bz3ujPqdes0t0VWE3F03Og3-NYbCHPSYmVG64s8
Category: Mechanical       
Skills: ANSYS, Mechanical Engineering       

m****012
 [?]
Sign in to view client's details.
| m****012
|    Malaysia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 57m ago  |  Ends: 14d, 11h  |   3 Proposals
I am the founder of a bike-share startup and I need a firm (not 1 individual) to first build a prototype device and then build a significant amount of devices under my direction; each bike will require a lock. I am knowledgeable in tech/it but I have no time to work on this as my startup seems to be gaining momentum. So I want users to be able to unlock the bike lock via their phones bluetooth. I had the idea of taking a remote controlled motorized pad lock for a door and modifying it with a LightBlue bean. We would obviously have to take the u lock and make it work with the existing motor from the pad lock unless you have a more efficient idea. Here are some URLs with some details of what I think we can modify and put together to make this work: 1. Open source pad lock configuration:   [obscured]  /projects/ble-controlled-door-lock/ 2. The bean:   [obscured]  /bean/buy/ 3. Bean's sandbox keycode:   [obscured]  /PunchThrough/Bean-LightBlueLatch/blob/master/Lig...
Category: Mechanical       
Preferred Location: North America

A****ain
 [?]
Sign in to view client's details.
| A****ain
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 11m ago  |  Ends: 14d, 8h  |   5 Proposals
Seeking an experienced Electrical engineer to create lighting plans, Requirements: 1.specify adequate amount of lighting to any given space, such as lobbies, corridors, rooms etc. 2.specify amount of lumens needed for each point 3. Specify adequete amount of electrical outlets and switches etc. 4. Experience with current available light fixtures 5. Experience with multi family residential and commercial buildings 6. Provide samples of work completed in the United States, Preferably NY Thanks
Category: Mechanical       

B****ign
 [?]
Sign in to view client's details.
| B****ign
|    United States
Hourly Rate: $30 - $40 / hr   |  Duration: 3-4 weeks  |  Posted: 16h, 51m ago  |  Ends: 14d, 7h  |   7 Proposals
Mechanical Engineer Engineering & Procurement Project Management Manufacturing Pumps Logistics -------------------------------------------------------------------------------------------------------
Category: Mechanical       

P****123
 [?]
Sign in to view client's details.
| P****123
|    Jordan
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 17h, 16m ago  |  Ends: 14d, 6h  |   7 Proposals
Helical Worm Gearbox Casting approx 3mm wall thickess (FYI 250w DC Motor & Fit inside 300mm cube) Take sketches to produce casting model with drafts for tooling and machining drawings and Assembled Model with Motor and Gears We have 3d Printer Our R&D uses SW
Category: Mechanical       
Skills: Die Casting       

K****ive
 [?]
Sign in to view client's details.
| K****ive
|    United States
Fixed Price: $500 - $1,000   |  Posted: 19h, 36m ago  |  Ends: 59d, 4h  |   25 Proposals
We are company based in Singapore and we are looking for a freelancer mechanical engineer with excellent skills in mechanical design and Solidworks. Are you up for the challenge? this job would like to divid into 3 tasks Estimated 1- The new design for the base and retractable cover ( 10-15 hours ) 2- The mechanical system with locking safety ( 20-40 hours ) 3- The gear box with the alternator ( power transmission ) ( 10-20 hours ) hours estimate depending on the skills of the freelancer ,,i prefer to go Task by task , at least we test the skills and experience of the freelancer Responsibilities: - Be available for a 6 month commitment for this part time, home based project! - Scope of work according to Smart Hump components : 1- First & second Ramp design details ( mechanism, shock absorber, etc ); 2- Mechanical feeding system to flywheel; 3- Design mechanical system to Generator; 4- Automatic Locking system for Ramps ( fail save, different vehicle weight with sensors ); 5- Hu...
Category: Mechanical       

I****015
 [?]
Sign in to view client's details.
| I****015
|    Singapore
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 29, 2015  |  Ends: 13d, 21h  |   5 Proposals
I am looking for a helping hand on creating a library for EAGLE with around 3 MCUs and 2 memory components MCU example: PIC32MZ2048ECG144 Memory example: SST26VF064B The packages will be TQFP and QFN. The expected outcome would be a reusable component library with pin names as they are defined on specs.
Category: Mechanical       
Skills: Mechanical Engineering, Eagle       

A****kas
 [?]
Sign in to view client's details.
| A****kas
|    Greece
Fixed Price: Less than $500   |  Posted: Jul 28, 2015  |  Ends: 5d, 14h  |   10 Proposals
Looking for someone with advanced FEA skills to create a model of a simple impact socket wrench having specific material and dimensions properties (supplied), and then simulate an air impact wrench loading on this socket for the purpose of optimizing the mass of the socket for a specific target load. Modeling the load of an impact wrench is not simple and built in features in AutoCAD are not what we want. This is not the same as a static load, hence the need for someone with the advanced knowledge to model this correctly and simulate needed conditions. Details of hammer mass inside the impact wrench are different for every brand and model, so will need to be approximated. We can supply ballpark figures of rotational load and spikes of impact typical to an average model. Resistance to spinning is based on thread friction between bolt and nut and given CoF with no lubricant. Here we can assume full tightness and allow no rotation, however some torque will still be absorbed or transferr...
Category: Mechanical       

W****ce9
 [?]
Sign in to view client's details.
| W****ce9
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 27, 2015  |  Ends: 12d, 17h  |   19 Proposals
Looking for an Industrial Designer to assist in the development of an aviation style men's wrist watch (Similar to Bell&Ross). This project will be starting for scratch. We are looking for future-forward aesthetics from ideation thru concept development, refinement, and execution. Candidate should demonstrate an extremely high level of sketch and rendering proficiency, with the ability to prolifically output lucid, quality ideas. Interested in seeing portfolio.....rates...and availability. NDA will be needed before work begins.
Category: Mechanical       

b****ne9
 [?]
Sign in to view client's details.
| b****ne9
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 27, 2015  |  Ends: 12d, 5h  |   2 Proposals
We wish to have a thermal test done on our new lighting Module mount SC-S. Here are the parameters: Test range of ambient temperatures -Warm (20-45 C / 68-113 F) -At 5 C increments Material and Product specs included in Package - Light engine spec sheet, assembly materials) - thermal paste Test with Gypsum Drywall & Junction Box in wall mounted condition (already positioned in a SolidWorks Assembly-Materials have been assigned to part files - Use "SC-S Sconce Thermal Test rB" for testing) Deliverables - Cut away section views of complete assembly w thermal shading at each 5C increment - Specific point temperatures indicated at IC, LED, and hottest point on assembly - A testing Protocol Checklist will be provided upon job awarding. Assumptions -Typical convective air flow (no wind etc) Timelines - Testing completed for Wednesday July 29, 2015 - Friday July 31,2015
Category: Mechanical       

T****RBW
 [?]
Sign in to view client's details.
| T****RBW
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 27, 2015  |  Ends: 11d, 18h  |   19 Proposals
Hello, I would like to create a new design for these camera glasses.   [obscured]  /product-detail/140degree-wide-angle-Ambarella-A5-camera_60289050481.html?spm=a2700.7724838.35.1.fGPqG8 The electronics will be the same, but the new look should be as close to this as possible.   [obscured]  /news/google-glass-price-release-date-specs-and-info The electronics and battery can be housed behind the ear, as in the original design. Once hired, I will have samples of original design to you to take apart. -Once design is approved, I want to have samples 3d printed, to test fit. Finally, I want to take product into production to be delivered to factory for electroncs.
Category: Mechanical       

e****sio
 [?]
Sign in to view client's details.
| e****sio
|    United States
Fixed Price: $5,000 - $10,000   |  Posted: Jul 26, 2015  |  Ends: 26d, 7h  |   38 Proposals
Spliffmaster 3000 Project Goal must be to get a finish prototype. We have th idea for a mechanical cnc machine. we have a plan of the workflow and also done a lot of research for the different parts of the machine. we are able to produce and design the electrical part for the machine but we are looking for a product designer for all the mechanical parts. result should be a plan to build s prototype of the machine. Work with a small team, keeping things simple and come to the goal to finish a great idea. We are open to discuss payments with you and promise to pay a fair price.
Category: Mechanical       

s****2k2
 [?]
Sign in to view client's details.
| s****2k2
|    Austria
Fixed Price: $20 - $100   |  Posted: Jul 26, 2015  |  Ends: 11d, 3h  |   9 Proposals
i need Simulation of Optimum conditions for the cold compaction process of Aluminium Powder , please for all details find attachment with many thanks
Category: Mechanical       
Skills: ANSYS, Mechanical Engineering       

m****012
 [?]
Sign in to view client's details.
| m****012
|    Malaysia
Fixed Price: Not Sure   |  Posted: Jul 25, 2015  |  Ends: 10d, 12h  |   18 Proposals
This request is to solicit bids from mechanical designers who can design modifications to an existing motorcycle frame. The motorcycle will be a hybrid of two motorcycles, a frame from a Yamaha and Engine from a Suzuki. The motorcycle will be used for racing. Please see the attached request for Proposal.
Category: Mechanical       

d****all
 [?]
Sign in to view client's details.
| d****all
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Jul 25, 2015  |  Ends: 10d, 9h  |   5 Proposals
Wireless mini blender to create a smoothie, preferably quiet, to take on the training of small size, to chopped ice
Category: Mechanical       

E****BFS
 [?]
Sign in to view client's details.
| E****BFS
|    Russia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 25, 2015  |  Ends: 10d, 7h  |   2 Proposals
Dear sir application for piping foreman gulf experience 8 year in chilled water piping and firee fighting i request for you
Category: Mechanical       
Skills: Mechanical Engineering       

r****ddy
 [?]
Sign in to view client's details.
| r****ddy
|    Bahrain
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 9d, 16h  |   17 Proposals
Tutor Pace (  [obscured]  ) is an accredited,Texas-based online tutoring service that provides world-class education solutions to students across the globe. We help students from kindergarten to college succeed in Math, Science, English, and Social Studies through online tutoring sessions that are geared toward the needs of the individual. Tutor Pace is looking for a motivated online math tutor who is experienced in pre-algebra, Algebra I & II, Trigonometry, and Calculus I & II or related fields. Math tutor candidates should be well-versed in all levels of mathematics topics (basically in pre-algebra, Algebra I & II, Trigonometry, Geometry, College Math and Calculus) or related fields and be able to communicate these concepts and skills to students at various learning levels. Qualification: Experience in teaching or tutoring in math. Tutors must have a minimum of a Bachelor's degree in math or a related field.
Category: Mechanical       

k****318
 [?]
Sign in to view client's details.
| k****318
|    United States
Fixed Price: Not Sure   |  Posted: Jul 24, 2015  |  Ends: 9d, 15h  |   38 Proposals
I have a unique idea that will be a hit in the US but I need a Mechanical Engineer and a 3D CAD / Solidworks designer to work with me on this project. This is a consumer product which will sell online (ecommerce) as well as in retail stores across the US. Other markets are being studied for feasibility. I am willing to give a portion of the company to this selected person that is willing to work with me on this. I need help from the mechanical, drafting & design side where I will take care of the procurement of parts, prototyping, distribution, logistics and all other business management features. If you are interested, open to creating a partnership, and willing to get this developed without initial compensation, please let me know. I know this will be a hit for every household in the US.
Category: Mechanical       

b****man
 [?]
Sign in to view client's details.
| b****man
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 23, 2015  |  Ends: 8d, 11h  |   10 Proposals
I need engineers and physicists for a particular national project. It involves manufacturing of modern warfare equipments. Submit proposals and past project samples(or possible ideas)
Category: Mechanical       

P****ist
 [?]
Sign in to view client's details.
| P****ist *
|    Nigeria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 7d, 9h  |   36 Proposals
Project Description: I am looking for a seasoned mechanical engineer to further enhance a dispensing system. The candidate should have experience with gear design, working knowledge of injection molding and experience working with polymer plastics. I am strictly looking for an engineer that have solid experience with mechanical design rather than a drafter. The candidate should also have experience with Solidworks,FEA and solidworks simulation.
Category: Mechanical       

p****uge
 [?]
Sign in to view client's details.
| p****uge
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 7d, 1h  |   7 Proposals
Hi, We are a startup looking to talk to highly skilled engineers on the elance platform to understand and improve your experience as a freelancer. We would really appreciate a 30-min conversation over the phone. Note: We don't have any funding as of now and hence cannot pay any incentive. We do hope to learn from your feedback and build a product or service that helps you out. Josh
Category: Mechanical       
Preferred Location: North America

t****ded
 [?]
Sign in to view client's details.
| t****ded
|    United States
Fixed Price: $200 - $350   |  Posted: Jul 22, 2015  |  Ends: 7d, 0h  |   3 Proposals
The plugin should be able to embedd fluid codes generated into Solidworks flow simulation and the stand-alone application via MS visual studio should call the Solidworks flow assembly and vary different impellers modelled (6 blade Rushton impeller, hydrofoil impeller and a conceptualized impeller) , carry out parametric analysis of simulation of the impeller (fluid height in containing vessel, impeller distance from vessel bottom, various position of impeller and vessel ) and determine the best impeller.that will give a better homogeneity of the fluid to be mixed). The working fluid is a non-Newtonian fluid. Details of dimensions of impeller and containing vessel are available both in doc and sldprt formats.
Category: Mechanical       

p****geo
 [?]
Sign in to view client's details.
| p****geo
|    Nigeria
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 21, 2015  |  Ends: 81d, 17h  |   7 Proposals
I am an entrepreneur looking for a very senior, creative, Massachusetts based, Mechanical Engineering Consultant to develop a mid-price device to help elderly and physically challenged people up / down stairs without falling. Optimally, your experience would include taking a consumer and/or medical device to market. This has the potential to be a once in a lifetime product and experience. If interested please provide your resume, related experience and target hourly rate.
Category: Mechanical       
Preferred Location: United States

j****h77
 [?]
Sign in to view client's details.
| j****h77
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job