Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 7 days
Fixed Price: Less than $500   |  Posted: Jul 30, 2015  |  Ends: 1d, 20h  |   18 Proposals
I need CAD drawings similar to the pipe/tubing of the attached image. I will supply the dimensions the curves will be left to you. I have the frame/chassis of the car and will give you the dimensions to work with the pipe/tubing. I will also spec the pipe OD and ID. Joints are to be welded and will be affixed to the car with clamp, nuts and bolts. $200.00 USD is too much for this job. Supplier must be able to communicate in English over the phone.
Category: CAD       
Skills: AutoCAD, AutoCAD 2012       

R****uma
 [?]
Sign in to view client's details.
| R****uma
|    United States
Hourly Rate: More than $50 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 28, 2015  |  Ends: 7h, 58m  |   0 Proposals
Technical translator required for CCC branding audit from Chinese auditors in Delaware, Ohio on August 17th and 18th. They might also require assistance during check in and check out of the hotel, and at dinners, on the 16th and 19th.
Category: Other - Engineering &...       
Skills: Materials Engineering, Manufacturing       
Preferred Location: United States

E****gne
 [?]
Sign in to view client's details.
| E****gne
|    France
Fixed Price: $30 - $100   |  Posted: Jul 27, 2015  |  Ends: 6d, 22h  |   1 Proposal
I need help with carrying out simulations for heat and mass transfer, as well as fluid flow within a system using STAR CCM+. Please let me know if that is something you can handle. Thanks.
Category: Other - Engineering &...       
Skills: 3D Modeling, CFD Modelling, STAR CCM+       

z****ati
 [?]
Sign in to view client's details.
| z****ati
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Jul 27, 2015  |  Ends: 6d, 21h  |   26 Proposals
Hi, we have a prototype UAV that we have built and we would now like to take it further and make it look tidier and nicer. We would like to make the aircraft out of composites, in molds. This requires that we have stl files for those molds. Also we would like to enhance the design, look into details, change things around etc. All this requires as first step that we have a full working computer model of the aircraft. There are a few moving parts (e.g. the tail surfaces, propellers, landing gear retract) but it is not a huge amount of moving things. We have relatively accurate measurements and even a physical 'model' although it is not that nice, at least it can be looked at to get a rough idea. Created files should be viewable and be able to be manipulated in Autodesk inventor, because we have this program and it would be easier if both you and we could fully view the file, turn it around, assemble and disassemble the model, make measurements, etc. We would prefer a fixed pric...
Category: CAD       

S****DDG
 [?]
Sign in to view client's details.
| S****DDG
|    Singapore
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: Jul 26, 2015  |  Ends: 6d, 14h  |   3 Proposals
With almost twenty years combined experience in engineering and construction project controls including pre-commissioning and commissioning, Lewy has continuously and actively been providing his professional experience both local and overseas for the timely implementation of national roads and bridges in the Philippines, marine terminal in Kuwait, refineries and tank farms in U.A.E, central processing facilities for on-shore oil and gas in Algeria, brine concentrator plant in NT, Australia, hydro-metallurgical and pyrometallurgical nickel processing plant in New Caledonia, Anglo American Coal Projects, IndoMet Coal Projects in Indonesia with project values ranging from 300M USD to 5,500M USD. He has extensively gained knowledge and experience in project management, project coordination, and analytical skills in developing, updating, maintaining and integrating engineering and construction schedules from proposal, conceptual, pre-feasibility, feasibility and implementation stages within...
Category: Other - Engineering &...       

g****888
 [?]
Sign in to view client's details.
| g****888
|    Australia
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 26, 2015  |  Ends: 6d, 10h  |   7 Proposals
I'm looking for a organic chemist or organic scientist to create an organic peanut lip balm. The product should protect dry lips, lip irritation and to help prevent sunburn while providing moisturizing lip care.
Category: Other - Engineering &...       

M****BOY
 [?]
Sign in to view client's details.
| M****BOY
|    United States
Fixed Price: Less than $500   |  Posted: Jul 26, 2015  |  Ends: 6d, 8h  |   3 Proposals
Hello. Please read the following carefully. I'm looking for someone to make 200 of these...... Step 1) Take a standard beer bottle. Cut the base off the bottle and discard the rest. You will now have a disc of thick glass about 6mm thick. Step 2) Put this on a vacuum forming machine and use it as the form. Use clear plastic about 200microns thick. Heat and pull the clear plastic down over the form. Step 3) Allow to cool. The finished product should be a shallow holder that a beer bottle would sit down into perfectly. I need 200 of these shallow holders. The attached image shows what I need you to MAKE. Let me be very clear. I DON'T WANT YOU TO design me a mold, or create a 3D model in CAD. I just want you to actually manufacture 200 of these little plastic discs. a) the plastic should be clear b) the plastic should be fairly rigid c) the shape should match a standard clear beer bottle PLEASE only contact me if you can actually make these discs. The fir...
Category: Other - Engineering &...       
Skills: plastic moulding - (vacuum)       

S****lin
 [?]
Sign in to view client's details.
| S****lin
|    Ireland
Fixed Price: $500 - $1,000   |  Posted: Jul 26, 2015  |  Ends: 6d, 4h  |   5 Proposals
Hello We need a few data scientist to work on assignment basis for our start up. Please send across your profiles. We need data scientist to build predictive analytics model for our upcoming project. Thanks Hemal
Category: Other - Engineering &...       
Skills: Scientific Computation       

h****com
 [?]
Sign in to view client's details.
| h****com
|    United States
Fixed Price: Less than $500   |  Posted: Jul 26, 2015  |  Ends: 5d, 21h  |   17 Proposals
need some drawing in solid edge 3d ST8 will supply cad and rough sketches need detail drawings
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, 3D Systems       

m****-uk
 [?]
Sign in to view client's details.
| m****-uk
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 25, 2015  |  Ends: 5d, 10h  |   34 Proposals
AutoCAD Project Format: AutoCAD 2010 Project name: Balance Template Layout: 2D Project Scope: Develop a drawing template for an industrial balance flow diagram (PID or PFD) to be used by our field engineers. Our engineers are familiar with AutoCAD and have limited working knowledge. The field engineer would be able to use Task: To populate the AutoCAD Design Center with standard blocks and other blocks from other prints. Currently, we have blocks existing in different prints and these blocks need to be extracted from the prints and put into the NEW AutoCAD drawing template. There would no more than 20 prints that blocks would need to be extracted from and imported into the new AutoCAD drawing template.
Category: CAD       
Skills: AutoCAD       

k****fel
 [?]
Sign in to view client's details.
| k****fel
|    United States
Fixed Price: Not Sure   |  Posted: Jul 25, 2015  |  Ends: 4d, 22h  |   30 Proposals
I require an experienced architectural draftsman to complete building application drawings. Base templates & house sitings will be provided in AutoCad 2014 format. An eye for detail & prompt turn around would be required. An understanding of Bracing requirements for Queensland would be an advantage. Multiple jobs are available to the right person.
Category: CAD       
Skills: Architecture, AutoCAD       

L****OBC
 [?]
Sign in to view client's details.
| L****OBC
|    Australia
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Jul 25, 2015  |  Ends: 4d, 22h  |   6 Proposals
I am working on a new dog safety product and am looking for a manufacturing assistant to research the best and most cost effective business or businesses to manufacture it for me. Alternatively manufacturers can contact me directly also if they are interested in tendering to create the product for me. The product itself is very simple, and has a snap hook at each end with a padded polyester webbing hand strap. I require information about the best prices you can find me for: 80mm Stainless steel snap hooks Branded polyester webbing Branded silicon tags Companies that Manufacture dog harnesses for making the product Costing for Shipping to NZ where I am based so I can distribute from here OR options to drop ship directly from the manufacturer.
Category: Other - Engineering &...       
Skills: Manufacturing, Product Design       

c****phy
 [?]
Sign in to view client's details.
| c****phy
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 25, 2015  |  Ends: 4d, 18h  |   1 Proposal
Do some work related to demodulate a signal using GnuRadio.Lets start with a simple one, it will be very easy assuming you know what you are doing. Are up for the challenge?
Category: Other - Engineering &...       
Skills: Electronics       

a****aur
 [?]
Sign in to view client's details.
| a****aur
|    Malaysia
Fixed Price: $35 - $100   |  Posted: Jul 24, 2015  |  Ends: 4d, 13h  |   40 Proposals
My project is pretty simple. I need 38 numbers of 3 different sizes to put into CAD files so that they can be properly 3d printed. The numbers have no overly unique typographic design to them, they only have certain size , width and thickness specifications.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, 3D Printing       
Preferred Location: North America

d****tte
 [?]
Sign in to view client's details.
| d****tte
|    Canada
Hourly Rate: More than $50 / hr   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 4d, 9h  |   4 Proposals
I have a 12-year-old Java program that I would like updated so that I can run it in an IDE such as NetBeans and make minor modifications. I'm not a Java programmer and don't wish to become one, but am familiar with Visual Basic. The program can be run online with   [obscured]  /~jgeabana/mol_dyn/KinThI.html, if you want to take a look. I have the Java source code but might be amenable to it being recreated in another language, if that would be easier. It's a simple program of about 800 lines.
Category: Other - Engineering &...       
Skills: Manufacturing Design, Java, Electronics, Physics       
Preferred Location: United States

e****iss
 [?]
Sign in to view client's details.
| e****iss
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 4d, 8h  |   30 Proposals
We're a small company in Maine getting ready to put a new product into production, we need to do GD&T on our existing drawings and find ourselves short on time and looking to outsource the work. We would prefer someone local, but are open.
Category: CAD       
Preferred Location: United States

Z****ity
 [?]
Sign in to view client's details.
| Z****ity
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 4d, 8h  |   2 Proposals
This is for a unique new social networking - meets - e-commerce site. We have a variety of components, and would like a person with excellent math skills - and ideally with good experience in social networking/social media/ecommerce - to put together into a formula to express the rate of growth over time of various classes of users. We have more detail and can discuss if you find this of interest and think you are qualified.
Category: Other - Engineering &...       
Skills: Scientific Computation, Mathematics       

J****NYC
 [?]
Sign in to view client's details.
| J****NYC *
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: Jul 24, 2015  |  Ends: 4d, 5h  |   3 Proposals
I wish to adapt the transmitter of a radio controlled car so that it can be a set of pedals and a steering wheel used for video gaming
Category: Other - Engineering &...       

S****ete
 [?]
Sign in to view client's details.
| S****ete
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jul 24, 2015  |  Ends: 4d, 4h  |   11 Proposals
I am looking for a device that will wake a child up and remind them to go to the bathroom. I want this alarm to have a wireless shut off button that can operate on the other side of a house (50 feet). I would also like this device to be set, shut off, and monitored though a app on iPhone or Android. The main unit I would like it to be plugged in with a battery backup and the secondary unit to be battery powered.
Category: Other - Engineering &...       

n****g77
 [?]
Sign in to view client's details.
| n****g77
|    United States
Fixed Price: Not Sure   |  Posted: Jul 23, 2015  |  Ends: 3d, 14h  |   1 Proposal
urbanfactory looking for Java Engineers Atleast 3-5 years experience required in NodeJs, Bootstrap, D3JS, Spring, REST, Hibernate, Java, J2EE. Please contact me directly through this thread. Just individuals. This is fulltime role.
Category: Other - Engineering &...       
Skills: Java, Spring Framework, REST, Bootstrap, J2EE       

r****lle
 [?]
Sign in to view client's details.
| r****lle *
|    United States
Fixed Price: Not Sure   |  Posted: Jul 23, 2015  |  Ends: 3d, 8h  |   2 Proposals
Hello there, Please find attached 18 pages the 3 pages of the attachment shows how to solve the equation. There is a question on the last page (P8-27c) with example 8-10 on page 5. The equation needs to be solved with Polymath. Add a Flowchart to the solution. Please let me know if you know how to solve this equation and how much are you going to bid for. Thank you very much. Noel
Category: Other - Engineering &...       
Skills: Petroleum Engineering       

n****ltd
 [?]
Sign in to view client's details.
| n****ltd
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 23, 2015  |  Ends: 3d, 8h  |   1 Proposal
I need a company or individual capable of designing and manufacturing an explosives detector. Detector must be efficient and capable of detecting from as far as 180meters out. It should be mountable on aircraft(eg. Choppers).
Category: Other - Engineering &...       

P****ist
 [?]
Sign in to view client's details.
| P****ist *
|    Nigeria
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 23, 2015  |  Ends: 3d, 6h  |   6 Proposals
I have a calculator I built in MS Excel. I now require another calculator similar to the one I have but with different equipment offerings with-in the calculator. I do not have time nor the the type of expertise required to build the new calculator in a professional manner. Need to hire someone to accomplish this task. I will supply the old calculator as a reference tool & any new data that will be input to complete the new calculator.
Category: Other - Engineering &...       

d****der
 [?]
Sign in to view client's details.
| d****der
|    United States
Fixed Price: $500 - $1,000   |  Posted: Jul 23, 2015  |  Ends: 3d, 5h  |   21 Proposals
developing detailed designs; assessing the potential risks of specific projects, as well as undertaking risk management in specialist roles; supervising tendering procedures and putting together proposals; communicating and liaising effectively with colleagues and architects, subcontractors, contracting civil engineers, consultants, co-workers and clients; thinking both creatively and logically to resolve design and development problems; managing budgets and other project resources; managing change, as the client may change their mind about the design, and ensuring relevant parties are notified of changes in the project; leading teams of other engineers, perhaps from other organisations or firms; compiling, checking and approving reports; reviewing and approving project drawings; using computer-aided design (CAD) packages for designing projects; undertaking complex and repetitive calculations;
Category: CAD       

S****990
 [?]
Sign in to view client's details.
| S****990
|    United States
Fixed Price: Less than $500   |  Posted: Jul 23, 2015  |  Ends: 3d, 4h  |   2 Proposals
Hello, I would like to start making my own soaps, bath bombs, bath salts and body products. I am ideally looking for a one covers all certificate allowing different soap bases and variations. We are open to all suggestions and need info on the prices you charge and what exactly you can offer.
Category: Other - Engineering &...       
Skills: chemist, cosmetics       
Preferred Location: United Kingdom

l****oap
 [?]
Sign in to view client's details.
| l****oap
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job