Save this Search
     
Sort by:
  • Posted Date
Payment Verified
Fixed Price: $500 - $1,000   |  Posted: Jul 26, 2015  |  Ends: 7d, 16h  |   5 Proposals
Hello We need a few data scientist to work on assignment basis for our start up. Please send across your profiles. We need data scientist to build predictive analytics model for our upcoming project. Thanks Hemal
Category: Other - Engineering &...       
Skills: Scientific Computation       

h****com
 [?]
Sign in to view client's details.
| h****com
|    United States
Fixed Price: Less than $500   |  Posted: Jul 25, 2015  |  Ends: 6d, 17h  |   7 Proposals
This is for a real world job involving the repair of an I-Beam steel girder supporting an existing bridge. A vehicle passing under the bridge hit one of the girders, causing damage to the bottom flange. The plan is to have the lower half of the I-beam cut out over a 10 foot length. The total length of the beam is exactly 50 feet, 7 inches. The center of the 10 foot section to be cut out is 20 feet from one end of the beam (in other words, the cut out section begins 15 feet and ends 25 feet from the end). The existing beam is a W-shape 30x108. Once the 10 foot section is cut out, we will place a 10 foot long WT 15x54 shape beam in its place. We will then place 3/4 inch thick steel plates on both sides of the new section's web the entire length of the new section (say, 12 to 15 feet or so). 3/4 inch steel plates will also be bolted to the underside of the bottom flange at each of the two cut locations. See the attached sketch of what this will look like (note that the steel plat...
Category: Civil & Structural       
Skills: Civil Engineering, Structural Analysis, AISC       

R****ns4
 [?]
Sign in to view client's details.
| R****ns4
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Jul 25, 2015  |  Ends: 6d, 9h  |   6 Proposals
I am working on a new dog safety product and am looking for a manufacturing assistant to research the best and most cost effective business or businesses to manufacture it for me. Alternatively manufacturers can contact me directly also if they are interested in tendering to create the product for me. The product itself is very simple, and has a snap hook at each end with a padded polyester webbing hand strap. I require information about the best prices you can find me for: 80mm Stainless steel snap hooks Branded polyester webbing Branded silicon tags Companies that Manufacture dog harnesses for making the product Costing for Shipping to NZ where I am based so I can distribute from here OR options to drop ship directly from the manufacturer.
Category: Other - Engineering &...       
Skills: Manufacturing, Product Design       

c****phy
 [?]
Sign in to view client's details.
| c****phy
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 25, 2015  |  Ends: 6d, 6h  |   1 Proposal
Do some work related to demodulate a signal using GnuRadio.Lets start with a simple one, it will be very easy assuming you know what you are doing. Are up for the challenge?
Category: Other - Engineering &...       
Skills: Electronics       

a****aur
 [?]
Sign in to view client's details.
| a****aur
|    Malaysia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 5d, 6h  |   7 Proposals
Exactly as the title says. Need someone with this experience, preferably someone who uses Flow 3D. If you can speak and/or read Chinese that is an added bonus.
Category: Civil & Structural       

p****ton
 [?]
Sign in to view client's details.
| p****ton
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 5d, 6h  |   6 Proposals
Stormwater Engineer with modeling, design, and drainage report preparation experience needed. Also must have excellent CAD skills using AutoCAD/Civil 3D. Please do not apply if you do not have all the skills listed above. If you can read and/or speak Chinese that is an added bonus!
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering       

p****ton
 [?]
Sign in to view client's details.
| p****ton
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 24, 2015  |  Ends: 5d, 6h  |   7 Proposals
Hydraulic Engineer needed for design/analysis of water gates, weirs, controls, and other spillway structures. No structural design, just conveyance. Preferably looking for someone in the United States but will consider others with references and previous work examples. If you can read and/or speak Chinese that is an added bonus!
Category: Civil & Structural       

p****ton
 [?]
Sign in to view client's details.
| p****ton
|    United States
Fixed Price: Not Sure   |  Posted: Jul 23, 2015  |  Ends: 4d, 8h  |   6 Proposals
I need a tutor in topology to help me in to understand some mathematical problems in topology I need a tutor in topology to help me in to understand some mathematical problems in topology I need a tutor in topology to help me in to understand some mathematical problems in topology I need a tutor in topology to help me in to understand some mathematical problems in topology
Category: Other - Engineering &...       
Skills: Mathematics       

m****lab
 [?]
Sign in to view client's details.
| m****lab
|    Jordan
Fixed Price: $5,000 - $10,000   |  Posted: Jul 23, 2015  |  Ends: 4d, 4h  |   14 Proposals
I am looking for a manufacturer to produce dog collar bow ties just like the ones on crewlala.com. looking to purchase about 1500 dog collar bow ties for less than $3 a piece. 4 designs - 4 sizes each design.
Category: Other - Engineering &...       

j****727
 [?]
Sign in to view client's details.
| j****727
|    United States
Fixed Price: $50 - $100   |  Posted: Jul 23, 2015  |  Ends: 4d, 3h  |   9 Proposals
i want an expert in advanced structural analysis in civil engineering the person should be academically strong
Category: Civil & Structural       
Skills: advanced structural analysis       

t****mba
 [?]
Sign in to view client's details.
| t****mba *
|    India
Fixed Price: $50 - $100   |  Posted: Jul 23, 2015  |  Ends: 4d, 2h  |   6 Proposals
i want an expert in advanced structural analysis in civil engineering the person should be academically strong
Category: Civil & Structural       
Skills: advanced structural analysis       

t****mba
 [?]
Sign in to view client's details.
| t****mba *
|    India
Fixed Price: $1,000 - $5,000   |  Posted: Jul 23, 2015  |  Ends: 15d, 1h  |   13 Proposals
to design a control panel for an outdoor, large, complex water fountain. this requires the control of daisy chain installed valves, led lamps, and water pumps.
Category: Other - Engineering &...       

G****RIL
 [?]
Sign in to view client's details.
| G****RIL
|    Mexico
Fixed Price: Not Sure   |  Posted: Jul 22, 2015  |  Ends: 4d, 1h  |   2 Proposals
We are looking for top experts to bring a website on top pages and bring more traffic. Applicants must responsible and reliable. Also must follow the todays standards and rules created by google and bing. NOT black hat or spam techiques are permitted .
Category: Other - Engineering &...       

b****res
 [?]
Sign in to view client's details.
| b****res
|    United States
Fixed Price: Not Sure   |  Posted: Jul 22, 2015  |  Ends: 4d, 0h  |   4 Proposals
I have a Rhino surface model of a part of a ship hull structure (see attached pix) which can be exported in any prefered format. The task is to import geometry in FEMAP and mesh it properly so the adjacent and intersecting surfaces have a congruent mesh. Generally the mesh is coarse, ecept certain areas with fine mesh. Marine or offshore design experience will be advantage. Please give me examples of similar work if you have such.
Category: Other - Engineering &...       

m****ski
 [?]
Sign in to view client's details.
| m****ski
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 22, 2015  |  Ends: 3d, 4h  |   9 Proposals
We are looking for oil and gas electrical, instrumentation, mechanical, structural, sub sea and operations writers and or instructors. You will be required to create outlines and then content for a range of courses ranging from oil and gas offshore platforms to refineries in topics from E&I Facilities Engineering to undersea engineering. Please clearly indicate your experience and ability to write and or instruct competently. You must be a qualified engineer with relevant experience. Topics include ? Process Safety Fundamentals ? Introduction to Oil and Gas Production Facilities ? I&C Fundamentals ? HAZOP ? LOPA ? Heat Transfer & Separation ? Pressure Relief Design ? Flow Assurance $20-$25 AUD Per Hour for writing work. Instructing fees TBA.
Category: Other - Engineering &...       
Skills: Technical Writing       

S****kay
 [?]
Sign in to view client's details.
| S****kay
|    Australia
Fixed Price: Not Sure   |  Posted: Jul 21, 2015  |  Ends: 47d, 20h  |   11 Proposals
Prototype to be designed and built for pat pending door safety product. Key elements of design and build are mechanical integrity, product strength combined with cost. Product is a door safety accessory which fits to underside of door, with a pedal-activated swing arm/barrier to allow/prevent door from closing fully. Materials/configuration must - withstand door being kicked and slammed etc - meet commercial imperative in terms of cost/benefit - retain minimal size of design for function, packaging and aesthetic reasons Minimal requirement is mechanical engineer with relevant materials expertise to design manufacture requirements and specify most effective materials to be used. Ideal proposal includes prototype manufacturing capabilities. Creative Proposals Welcome, such as - different parties collaborating to combine distinct competences required - equity instead of cash for significant contribution - lower cost model from simpler materials to prove design functionality Thank ...
Category: Other - Engineering &...       

J****USA
 [?]
Sign in to view client's details.
| J****USA
|    United States
Fixed Price: Not Sure   |  Posted: Jul 21, 2015  |  Ends: 2d, 19h  |   13 Proposals
I know what I want and even have a proto type. I need some design work to market the product. It is mostly mechanical work with a 12vt switch and small pump. Thank you Dave O
Category: Other - Engineering &...       

D****ave
 [?]
Sign in to view client's details.
| D****ave
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 21, 2015  |  Ends: 2d, 18h  |   6 Proposals
I need to design a self standing walking cane with a retractable grabber system. The grabber is concealed in the center bottom of the cane and deploys from the center bottom. A lever on the handle allows pinches the grabber. The grabber retracts into the center. Maybe it retracts by pressing it down into the floor and deploys by pressing the lever or a trigger. See pictures.
Category: Other - Engineering &...       

t****962
 [?]
Sign in to view client's details.
| t****962
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 21, 2015  |  Ends: 2d, 18h  |   5 Proposals
Hi. I noticed you performed a few jobs using QGIS. I am interested in creating an initial map of a small US city. In the map I need to represent its school district boundaries and overlay that with custom schools zones determined by a student's local school identification. If the initial map works I will offer additional work to add other layers to the base map.
Category: Other - Engineering &...       

r****eto
 [?]
Sign in to view client's details.
| r****eto
|    United States
Fixed Price: Less than $500   |  Posted: Jul 21, 2015  |  Ends: 2d, 17h  |   4 Proposals
I am the sales director for an Industrial Wall Mount Air Conditioning Company. We manufacture units for oil rigs and such. We are looking to update our company logo to something more modern. I would like to use the logo and colors as a base for the brochure. The logo will also be placed on the air conditioners (currently the units have no company logo on them. The company is Maverick Enterprises and we currently use a horse as our logo. Would love to make the horse more of a "maverick" while using the company name or a simple "M" Open to all colors. I will provide pictures and such. Needs to be in Adobe In Design so I can modify at a later time.
Category: Other - Engineering &...       
Preferred Location: North America

b****ux1
 [?]
Sign in to view client's details.
| b****ux1
|    United States
Fixed Price: Not Sure   |  Posted: Jul 21, 2015  |  Ends: 2d, 10h  |   8 Proposals
Hi there, we are looking for a company who can provide hyrdo dipping services to us. We have a device that requires dipping into shiny metallic gold and shiny metallic silver. There will be 1000 units of this device to be dipped. Does anyone know of a company who could do this for us in either China or Dubia regions?
Category: Other - Engineering &...       

a****ks1
 [?]
Sign in to view client's details.
| a****ks1
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 20, 2015  |  Ends: 1d, 15h  |   5 Proposals
We are in a startup phase of a product related to Digital Photo Frames. We need a person who has excellent working knowledge of Electronics Field, Embedded Systems, Knowledge related to circuits, TFT LCD's, Arduino, Raspberry Pi and such. Experience doesn't matter as long as you know plenty about these stuff. We need someone from Mumbai, India and that's an absolute must! You'll have to sign an NDA before we can move along.
Category: Other - Engineering &...       
Preferred Location: India/Southern Asia

u****eio
 [?]
Sign in to view client's details.
| u****eio
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Jul 19, 2015  |  Ends: 1d, 1h  |   10 Proposals
to design a control panel for an outdoor, large, complex water fountain. this requires the control of daisy chain installed valves, led lamps, and water pumps.
Category: Other - Engineering &...       

G****RIL
 [?]
Sign in to view client's details.
| G****RIL
|    Mexico
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Jul 19, 2015  |  Ends: 15d, 18h  |   7 Proposals
Goal ? Stream music wirelessly in my car from an iPhone to an Apple Airport Base station connected to the car stereo. Method ? The attached diagram shows the finished product and this YouTube video shows how:   [obscured]  /qyey7tzbEFY. You'll assemble per attached instructions. Materials ? I'd ship you: - Apple Airport Express Base Station - USB cable - 3.5mm audio cable - USB car charger Additional Materials ? You'd purchase the $2 voltage regulator to expedite the process, charging me for the product and shipping:   [obscured]  /products/526 Finish ? You'd ship me the finished product per the attached diagram.
Category: Other - Engineering &...       
Skills: Electronics, Arduino, Soldering       

A****dom
 [?]
Sign in to view client's details.
| A****dom
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job