Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: 2h, 16m ago  |  Ends: 14d, 21h  |   0 Proposals
need a drafts-person to an engineered scaled drawing at at least a 1"=50' larger scale for a use permit in Baltimore County. The drawing must include a street vicinity mat with site indicated, north arrow, scale of drawing, property outline, and dimension in feet, the square footage of the lot, and the current zoning of the property per the 1"=200' scale official zoning map. Also need the dimension footprint of the ground floor area and gross floor area for all floors (2 floors & a basement). Also need to show and label a minimum of 10% of the lot as open space and describe method of calculation.
Category: Other - Engineering &...       
Preferred Location: United States

m****h56
 [?]
Sign in to view client's details.
| m****h56
|    United States
Fixed Price: $500 - $1,000   |  Posted: 3h, 24m ago  |  Ends: 14d, 20h  |   1 Proposal
Is a Motorcycle Safety belt for passengers of small motorcycles and some animals. I need help finishing my business plan. Find someone to make and sell my product market it and help me to get my business started up and going. Have Trademarked Logo and the Patent Pending status. I want my logo out there.
Category: Other - Engineering &...       

O****dit
 [?]
Sign in to view client's details.
| O****dit
|    United States
Fixed Price: $45 - $75   |  Posted: 7h, 39m ago  |  Ends: 2d, 16h  |   2 Proposals
This project is a part of a bigger project to product a mixed signal IC chip. The digital module will control transistor (MOSFET) switches in an analog circuit. Each switch (from the 8 MOS switches), will transition twice during a clock cycle. So there is T1, T2, T3, T4, T5, T6, T7, T8, in 4 clock cycles. But the duty cycle isn't 50%. So a proposed method of implementation would be to have T1 on the rising edge, and T2 on the falling edge. (2 always blocks can be written or so). The analog circuit has 4 regions of operation, the control signals sent to the MOS switches will change according to the operation region (the operation region is controlled externally). In the design attached (Digital Module 2.png), the FSM controls the select of the MUX. The MUX outputs the control signal to the switch. And the FSM gets its input from LUTs. The LUTs have the switching information depending on the operation region. The paper explaining the entire mixed signal operation is attached. The...
Category: Other - Engineering &...       

R****lan
 [?]
Sign in to view client's details.
| R****lan
|    Egypt
Fixed Price: $500 - $1,000   |  Posted: 13h, 5m ago  |  Ends: 14d, 10h  |   8 Proposals
Hello. I've some mathematical works with probability theory and Markov's chains. Need solve it. Problems is about satellite trajectory.
Category: Other - Engineering &...       
Skills: Mathematics       

b****ich
 [?]
Sign in to view client's details.
| b****ich
|    United States
Fixed Price: $100 or less   |  Posted: 21h, 52m ago  |  Ends: 14d, 2h  |   5 Proposals
I need a design and irrigation solution to an area of 40 ha. the solution must be simple and meet mahogany planting. must support livestock traffic that will pass after 24 months of planting. details : - Will be 400 trees per hectare - Each one tree requires 8 liters per day
Category: Other - Engineering &...       
Skills: Agriculture       

p****ote
 [?]
Sign in to view client's details.
| p****ote
|    Brazil
Fixed Price: Not Sure   |  Posted: 23h, 3m ago  |  Closed  |   3 Proposals
I want samples and prototype for my product to deliver it as soon as possible to make it by 3d printing
Category: Other - Engineering &...       
Skills: 3D Modeling, Manufacturing Design       

A****rra
 [?]
Sign in to view client's details.
| A****rra
|    Saudi Arabia
Fixed Price: Less than $500   |  Posted: May 05, 2015  |  Ends: 13d, 16h  |   0 Proposals
Hi I have some works need to be experimentally done like ( impact and compression after impact ) and then conduct some C-scan and fractographic. The materials need to be used are carbon fibre prepreg, and multi walled carbon nanotubes. Thanks
Category: Other - Engineering &...       

A****ker
 [?]
Sign in to view client's details.
| A****ker
|    Australia
Fixed Price: $5,000 - $10,000   |  Posted: May 04, 2015  |  Ends: 88d, 2h  |   8 Proposals
Hello, We are looking for a router that can work in ad hoc and infrastructure mode together. It will create two wireless networks. One mesh network to connect to other wireless routers and another network to connect mobile devices to the internet. Each router should boost/extend the signal. Not sure which one is the best (5 Ghz or 2.4 Ghz) but the system should operate within the ISM 863-870 MHz range Europe and other. More details in private message. Thanks MAGUIDO
Category: Other - Engineering &...       
Preferred Location: North America, Eastern Asia

m****ido
 [?]
Sign in to view client's details.
| m****ido
|    Belgium
Fixed Price: Not Sure   |  Posted: May 04, 2015  |  Ends: 13d, 0h  |   3 Proposals
Hello Freelancer, FWS is looking for an engineer(s) to help research and compile data of raw materiel ferrous/nonferrous metals and plastics specifications and closest equivalents for the different societies from around the world. Data can be compiled from existing sources such as websites , text books or any other verifiable sources. Similar websites ;   [obscured]  /index.aspx ;   [obscured]  /demob_kov_chem.cfm. Final deliverable format TBD. Thanks
Category: Other - Engineering &...       

t****oll
 [?]
Sign in to view client's details.
| t****oll
|    United States
Fixed Price: Not Sure   |  Posted: May 04, 2015  |  Ends: 12d, 17h  |   2 Proposals
Looking for a direct replacement to the "LENOVO ThinkVision LT1423p wireless touch monitor" you can also design one with NRE + unit cost. general requirements: ? Dimensions must be very similar (no more than 10mm difference in any dimension) ? 13.3'' wireless touch screen ? Full HD resolution ? 16:9 ration ? Touch technology compatible with+ gloves , projected capacitive ? Strong Wireless connection from ~5 meters ? Supports video streaming in no less than 450Mbps ? Internal battery for hand held operation
Category: Other - Engineering &...       

y****3tn
 [?]
Sign in to view client's details.
| y****3tn
|    Israel
Fixed Price: Less than $500   |  Posted: May 04, 2015  |  Ends: 12d, 17h  |   3 Proposals
Looking for firmware developer for Bluetooth Low Energy device for Anti lost and other features for TI or Nordic chips.
Category: Other - Engineering &...       

t****ere
 [?]
Sign in to view client's details.
| t****ere
|    India
Fixed Price: Less than $500   |  Posted: May 03, 2015  |  Ends: 12d, 5h  |   10 Proposals
Apollonian cone, it is a cone which has a circle, ellipse, Parabola & Hyperbola in a single cone. Please find the attachment. I need a model to design it and also a prototype made from wood.
Category: Other - Engineering &...       

s****tta
 [?]
Sign in to view client's details.
| s****tta
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: May 03, 2015  |  Ends: 26d, 16h  |   10 Proposals
This job is for someone who can make a 3D powder printer (powder bed and inkjet head 3D printer) based on the open source 'Plan B' printer:   [obscured]  /plan-b/ You take care of the entire process, from analyzing the design, sourcing the parts, making the printer and eventually shipping the printer to Belgium. You should have some experience in this field. It's a very hands-on job that requires quite some technical skill. I'd like a few alterations to the original design we can discuss later (in brief, I'd prefer a RVS frame instead of aluminum and an other type of cartridge might be preferable). Feel free to discuss anything about this job with me first.
Category: Other - Engineering &...       

F****s78
 [?]
Sign in to view client's details.
| F****s78
|    Belgium
Fixed Price: Not Sure   |  Posted: May 03, 2015  |  Ends: 26d, 15h  |   10 Proposals
I need music made for a video project about Iran. I would like for the music to be a kind of fusion between modern and traditional persian sounds. I am open to creating this "fusion" within any genre or sub genre (dubstep, electronic, acoustic etc.) I will obviously provide examples of the kind of tracks I would want. And I will also provide tracks of traditional persian music/instruments that can be sampled for this project. The video is approximately 10-15 minutes long and I would need music almost the entire duration. I am also open to having mutiple tracks made as opposed to just one very long track.
Category: Other - Engineering &...       

S****Mad
 [?]
Sign in to view client's details.
| S****Mad
|    Malaysia
Fixed Price: $30 - $50   |  Posted: May 02, 2015  |  Ends: 11d, 1h  |   2 Proposals
questions regarding: -heterostructures and low dimensional systems -strain engineering - heterostructures and quantum wells - modulation-doping heterostructures - 2DEG (2dimensional electron gas) *note: will send softcopy of question if able to do
Category: Other - Engineering &...       

j****123
 [?]
Sign in to view client's details.
| j****123
|    Singapore
Fixed Price: $30 - $50   |  Posted: May 02, 2015  |  Ends: 11d, 1h  |   3 Proposals
questions regarding: -heterostructures and low dimensional systems -strain engineering - heterostructures and quantum wells - modulation-doping heterostructures - 2DEG (2dimensional electron gas) *note: will send softcopy of question if able to do
Category: Other - Engineering &...       

j****123
 [?]
Sign in to view client's details.
| j****123
|    Singapore
Fixed Price: $20 - $30   |  Posted: May 02, 2015  |  Ends: 11d, 1h  |   7 Proposals
questions are regarding - elastic/ inelastic mean free path - aharonov-bohn effect - current/charge densities - density of states - quantum wire - density of occupied states - average energy of electrons in 3D electron gas - consine approximation - 1D crystal - bloch oscillations *note: will send the softcopy questions if able to do
Category: Other - Engineering &...       
Skills: Physics, Teaching Physics, nanoscale       

j****123
 [?]
Sign in to view client's details.
| j****123
|    Singapore
Fixed Price: Not Sure   |  Posted: May 02, 2015  |  Closed  |   9 Proposals
I want to build a logo for my company dealing with the construction of wooden houses , laminated wood windows with double glazing, doors and others wood products. My company name is Danea Forest Grup.
Category: Other - Engineering &...       

L****tzu
 [?]
Sign in to view client's details.
| L****tzu
|    Romania
Fixed Price: $1,000 - $5,000   |  Posted: May 02, 2015  |  Ends: 10d, 16h  |   2 Proposals
Assistance for projects using the IBM Bluemix platform. Must be familiar with the platform and know multiple programming languages. Focus on use of Watson APIs Development of Cognitive Apps
Category: Other - Engineering &...       
Skills: Big Data, IBM Watson, Mobile App Development       

x****ira
 [?]
Sign in to view client's details.
| x****ira
|    Estonia
Fixed Price: Less than $500   |  Posted: May 01, 2015  |  Ends: 10d, 5h  |   4 Proposals
Hello, We have wordpress setup on our site, redeyecollection.com. We are using contact form 7 as the form and are unable to find a way to setup form completion tracking in GA for this. I would like to setup goal tracking for form completion, and event. Is this possible? Would love the project done in the following phases Phase 1 Tracking Recommendation Phase 2 Coder implements form tracking for GA Thanks
Category: Other - Engineering &...       

t****t85
 [?]
Sign in to view client's details.
| t****t85
|    United States
Fixed Price: Not Sure   |  Posted: May 01, 2015  |  Closed  |   4 Proposals
Hello. I require someone with understanding of physics / fire behavior to create an excel spreadsheet based on the attached documents. Ive been informed that its reasonably straight forward however I don't have the time to sit down and study it. The model predicts the expected energy output from a fire based on certain variables. Please have a look at the attached files before quoting for the job. Thanks
Category: Other - Engineering &...       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

w****777
 [?]
Sign in to view client's details.
| w****777
|    Australia
Fixed Price: Less than $500   |  Posted: Apr 30, 2015  |  Closed  |   4 Proposals
We need to develop a weighing indicator which can be connected with UPS Worldship Software via USB port. The indicator can be installed as one of the compatible scales listed on UPS scale drop down list. The scale base has 4 full bridge load cells. Excitation voltage is 5V. The USB should use HID interface - no driver is required. The unit cost of this indicator should be less than $30. You may need to be familiar with A/D conversion chip sets. This will be an ongoing project. We are a scale manufacturer. Thanks, Edward
Category: Other - Engineering &...       

e****pan
 [?]
Sign in to view client's details.
| e****pan
|    United States
Fixed Price: Less than $500   |  Posted: Apr 30, 2015  |  Ends: 9d, 2h  |   1 Proposal
I am trying to model a Czerny-Turner configuration in Zemax. This is how it looks like:   [obscured]  /wp-content/uploads/2012/06/4-1.gif 1. I know what lens I will be using and they are available in the catalog. 2. I know the length of my Array Detector (32mm) I need a Zemax model which allows me to determine: 1. the (x,y) position of each component (from this I can figure out how far each should be) 2. the angles of each of these components relative to normal? (as viewed from above)
Category: Other - Engineering &...       
Skills: Radiant Zemax       

e****hum
 [?]
Sign in to view client's details.
| e****hum
|    United States
Fixed Price: Not Sure   |  Posted: Apr 30, 2015  |  Ends: 8d, 23h  |   5 Proposals
I have a shoe line that im looking to start. i already have the shoe design with the 3d files. need a company to make me a few prototypes to get started before i go into full production.
Category: Other - Engineering &...       

O****nte
 [?]
Sign in to view client's details.
| O****nte
|    United States
Fixed Price: Less than $500   |  Posted: Apr 29, 2015  |  Ends: 8d, 8h  |   3 Proposals
Sweet Siren is a new company from the US Virgin Islands. Their product is organic cleansing body pearls made from organic ingredients (cleansing clay, salt, sugar, coconut butter, vitamin E etc.). We would like help finding where we can purchase these ingredients fair trade and preferably from other islands. Ingedients must be able to be shipped to St.John, VI and should be competitively priced. Sweet Siren pearls take the place of your soap, body wash, exfoliant and lotion. Pearls are handmade in the islands, and will be sold in eco-friendly recyclable packaging. Partial proceeds are donated to Whale and Dolphin conservation, a non-profit. We look forward to hearing from you! :) You also get a free box when product launches! Yes!
Category: Other - Engineering &...       

s****i27
 [?]
Sign in to view client's details.
| s****i27
|    Virgin Islands (US)
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job