Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $50 - $80   |  Posted: Apr 18, 2014  |  Ends: 20h, 31m  |   0 Proposals
I'm looking for someone who is knowledgeable of the REScheck Software Version 4.4.4 I need to generate a Envelope Assemblies table showing Gross Area, Cavity R-Value, Cont. R-Value, Glazing or Door U-Factor, UA. This should be a simple job if you know anything about Rescheck
Category: Other - Engineering &...       
Skills: 3D Modeling, Architecture, AutoCAD       

t****013
 [?]
Sign in to view client's details.
| t****013
|    United States
Fixed Price: Less than $500   |  Posted: Apr 18, 2014  |  Ends: 13d, 16h  |   8 Proposals
I have a small part designed that I would like to have a mold made. The part is slightly larger than 1 cubic inch. The mold can be made out of aluminum to save cost. It should be a simple 2 part mold, The 3D CAD file is complete, draft has already been factored in. I will be injecting the mold with a homemade machine I created. Summary - I need CNC machine services and someone with experience in mold machining to make an inexpensive yet perfectly functional mold.
Category: Other - Engineering &...       
Skills: CNC machining       

c****tis
 [?]
Sign in to view client's details.
| c****tis
|    United States
Fixed Price: Less than $500   |  Posted: Apr 18, 2014  |  Ends: 13d, 14h  |   7 Proposals
I am in need of an inexpensive molding and manufacturing run of a simple item. The item measures @ 6.5 inch x 3 inch. I have attached an image that illustrates that the item is NOT solid plastic, but has open areas within these measurements. (The item resembles the letter "T" with a short leg. The leg has to be of a bendable plastic that could bend back to the Top of the "T". The center of the top of the "T" can be a rigid plastic). (2 separate plastic pieces glued together). I have an already existing Solidworks 3D file that will be sent to the winning bid for review and molding. All plastics types can be considered if they pass US import requirements for products. I have already been given initial mold pricing of ($600.00) from another company and am looking to beat that price. Assembled item pricing bid is currently at .15 cents per item. (Quantities are 5K+) If you can beat these prices by at least 20%, then please make a bid and send samples of ...
Category: Other - Engineering &...       

T****ury
 [?]
Sign in to view client's details.
| T****ury
|    United States
Fixed Price: $1,000 - $2,000   |  Posted: Apr 18, 2014  |  Ends: 24d, 8h  |   6 Proposals
I would like for a site to be developed and launched to facilitate car parts and accessories search based on the details of the vehicle. Further that when an inquiry is made by a customer, that the managing division of the company can view these queries via email etc to begin search and price the inquiry and then email it to the customer for purchase. (purchase option via paypal would be appropriate). Further details will follow concerning: Design Layout Logistics of Inquiries SMS Messaging to notify customer of their product tracking. Two More Aspects (Confidential)
Category: Other - Engineering &...       

d****rah
 [?]
Sign in to view client's details.
| d****rah *
|    Bahamas
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 18, 2014  |  Ends: 13d, 8h  |   4 Proposals
This is a straightforward quick and short job for an experienced FPGA engineer. I mainly require the implementation of an AXI DMA datamover in a Xilinx Zynq device. More importantly using PlanAhead software. There are a bit more details to the project that I would provide later.
Category: Other - Engineering &...       
Skills: Embedded Systems, Embedded System       

o****h11
 [?]
Sign in to view client's details.
| o****h11
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Apr 18, 2014  |  Ends: 13d, 5h  |   2 Proposals
Hi, we are a button factory in China, we need to create a database for all our buttons, when a new button is created we need to upload it to the database, categorize it by brand, size, material, and then we have to update the cost price and our partners have to access and input the sell price, pls contact me   [obscured]   i want to create this in zoho creator, there are a lot of functions we want to do, if the first tool is ready and a success many more tools will follow. thanks for contacting me. Best regards, Max
Category: Other - Engineering &...       

m****ing
 [?]
Sign in to view client's details.
| m****ing
|    Spain
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 17, 2014  |  Ends: 12d, 20h  |   5 Proposals
It's a basic C program that some of the parts have already been given but basically I need C code that would autocomplete words using an array. I have all the details for anyone interested in a quick weekend job for quick money. Its mildly in depth in instructions so I wasn't going to simply copy the whole thing over.
Category: Other - Engineering &...       
Skills: C       

j****eek
 [?]
Sign in to view client's details.
| j****eek
|    United States
Fixed Price: More than $10,000   |  Posted: Apr 17, 2014  |  Ends: 12d, 14h  |   1 Proposal
I am looking for the development of a portable device which will be able to recognize at a certain level, images printed at the back side of a cardboard. Recently, I have heard the development of microchip utilizing Terahertz for "Xray" short of vision. Maybe there is another technology, that I am not aware of. If this kind of technology/device is in prototype or test mode, I am still interested.
Category: Other - Engineering &...       

s****ist
 [?]
Sign in to view client's details.
| s****ist
|    Greece
Fixed Price: More than $10,000   |  Posted: Apr 17, 2014  |  Ends: 27d, 14h  |   0 Proposals
I am looking for the development of a portable device which will be able to recognize at a certain level, images printed at the back side of a cardboard. Recently, I have heard the development of microchip utilizing Terahertz for "Xray" short of vision. Maybe there is another technology, that I am not aware of. If this kind of technology/device is in prototype or test mode, I am still interested.
Category: Other - Engineering &...       

s****ist
 [?]
Sign in to view client's details.
| s****ist
|    Greece
Fixed Price: Less than $500   |  Posted: Apr 17, 2014  |  Ends: 12d, 12h  |   12 Proposals
Schematic capture and board layout for a tiny PCB board. The board is a very simple and has only 2 connectors: One is a dual stacked USB 3.0 R/A SMT connector and the second is a 19 pin header to plug to USB a 19 pin header dual USB 3.0 port on MB. They are a high speed signals, so consideration of signals interfaces must take into board layout.
Category: Other - Engineering &...       
Skills: PCB Design       

e****avi
 [?]
Sign in to view client's details.
| e****avi
|    United States
Fixed Price: Not Sure   |  Posted: Apr 17, 2014  |  Ends: 12d, 8h  |   0 Proposals
Inviting professionals of experienced and certified Six Sigma (Black Belt level) professionals to develop Video content for the Six Sigma Black Belt certification training (as per ASQ Six Sigma Black Belt Body of Knowledge). Content needs to be in line with the latest exam structure, and will include all necessary concepts in the form of a) Videos: Need to provide 10-15 hours of video content b) Flash Cards: Min. 500. These are of a flip-type concept-definition format c) Section tests: 1 test (with ~30 questions) per topic/section d) Mock Exams: 4 sets as per the latest exam format e) Tool Kits: Spreadsheet/Powerpoint/Word based templates for Six Sigma Black Belts (minimum 15) The videos also needs to include suitable animations/animation ideas for which need to form minimum 30% of the overall content coverage.Bids will be evaluated on price, quality, and delivery time-frame. Please respond to this post to apply. Preference will be given to experts from US and UK. Also, please sha...
Category: Other - Engineering &...       
Skills: Manufacturing Design, Lean       

L****are
 [?]
Sign in to view client's details.
| L****are
|    India
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Apr 17, 2014  |  Ends: 12d, 1h  |   5 Proposals
I am looking for an individual that will test a logical quiz meant for employees. This is proprietary software that will require confidentiality agreement. The quiz willbe less than 60 questions. The successful candidate will be able to Solve puzzles swiftly Have a mathematical capacity up to including Calculus Have a very good understanding of the English Language Must be able to finish the quiz within a set time Must have some sort of programming knowledge Have locomotive knowledge Geometry Score high on previous IQ tests (not a measure of intelligence) with proof Provides adequate constructive feedback Can provide insights and ideas that are though provoking This task will be overseen by 2 programmers for a reputable Canadian company. If the individual understands, completes, scores high and provides constructive feedback there will be further requests from the individual up to and including full time employment. Thanks
Category: Other - Engineering &...       

c****sp1
 [?]
Sign in to view client's details.
| c****sp1 *
|    United States
Fixed Price: Less than $500   |  Posted: Apr 16, 2014  |  Ends: 11d, 18h  |   4 Proposals
We need three white papers developed, one for each market segment, that shows how to use a Solid State Relay in a typical application. The markets are as follows: 1. Aerospace/Defense 2. Medical Equipment (and diagnostics) 3. Transportation/Agricultural Equipment For each whitepaper, we need a problem to be stated (as in motor/heater control, etc...), a circuit design, simulated or tested, results and discussion of the results and comparison to other similiar designs. We are planning on using this for marketing and sending to engineers in these industries to help give them better ideas on how to use our products or give them a starting point or new ideas for the application of our products and/or technical knowledge.
Category: Other - Engineering &...       

s****yka
 [?]
Sign in to view client's details.
| s****yka
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 16, 2014  |  Ends: 11d, 15h  |   3 Proposals
I am looking to get some "patterned tights" created and I'm not sure how to go about doing that. I have the design for it. Anyone out there could help me with this?
Category: Other - Engineering &...       
Skills: screen printing, sewing       

C****Inc
 [?]
Sign in to view client's details.
| C****Inc
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 16, 2014  |  Ends: 11d, 13h  |   5 Proposals
We are seeking a freelance Optical Engineer to work with us in the design of a new line of medical / surgical magnifying loupes.
Category: Other - Engineering &...       
Skills: AutoCAD, Manufacturing Design, Pro-E       

J****ien
 [?]
Sign in to view client's details.
| J****ien
|    United States
Fixed Price: Not Sure   |  Posted: Apr 16, 2014  |  Ends: 11d, 13h  |   1 Proposal
I'm looking for someone to sew some active wear for me. I do not have patterns just ideas and fabric. I need a few tops and bottoms to fit me personally.
Category: Other - Engineering &...       
Skills: sewing       
Preferred Location: United States

r****tos
 [?]
Sign in to view client's details.
| r****tos
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Apr 16, 2014  |  Ends: 11d, 7h  |   1 Proposal
? Possess Three years of professional experience as Instrument Field Technician in Construction, Pre-Commissioning and Installing of Instruments. ? In-depth knowledge of data sheets, instrument drawings, I/O wiring diagrams, P and IDs, calculation and specifications ? Extensive knowledge of instrument communication systems and approaches of measurement technologies ? Familiar with QA\QC test check record required during Construction and Pre-commissioning stages ? Familiar with Industrial Automation Tools (PLC,DCS) FIELD CONSTRUCTION: ? Knowledge on field work: how to install different instrument parameters which are as follows ? Instrument stand fabrication , Mounting of transmitter on stand as per standard ? Installation of primary sensing element, Installation of hook up/tubing ? Cabling concept secondary conduit designing concept, Primary conduit cable tray mechanism ? Cable dressing, termination and sealant pouring in the Junction Box ? Knowledge of how to present a Master track...
Category: Other - Engineering &...       

m****741
 [?]
Sign in to view client's details.
| m****741
|    United Arab Emirates
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Apr 16, 2014  |  Ends: 11d, 7h  |   6 Proposals
Design icons for UI push buttons. Our application is a UI for semiconductor test equipment. Icons must reflect "intent" of button. I've attached what we currently have (we're not satisfied with what we have). As an example of what we are trying to model please view the current Google "Apps" button. I can define what each button does when required - the button function will dictate the icon design.
Category: Other - Engineering &...       

f****wkr
 [?]
Sign in to view client's details.
| f****wkr
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Apr 16, 2014  |  Ends: 11d, 4h  |   11 Proposals
We have a fairly simple CFD analysis that needs to be done (impellers & 2 diff liquids). Will discuss more details about the project in detail over skype. We have frequent analysis requirements, please apply only if you're in London.
Category: Other - Engineering &...       
Skills: 3D Modeling, ANSYS, Manufacturing Design       

t****iqr
 [?]
Sign in to view client's details.
| t****iqr
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Apr 16, 2014  |  Ends: 11d, 1h  |   1 Proposal
I need a estimate for website designed that will interface between internet users and local farmer to produce organic vegetable and organic fruit, and organic animals on real time. Users will go to the wed store buy the supplies. They get sent to the farmer with the order and the participants at the farm will process the order while been on surveillance cameras watched by internet users . As the products are ready, they are shipped to the users. I am an old school farmer and will respond better by phone 925 202 7918 Alexandre Machado
Category: Other - Engineering &...       

b****sta
 [?]
Sign in to view client's details.
| b****sta
|    United States
Fixed Price: Not Sure   |  Posted: Apr 16, 2014  |  Ends: 11d, 1h  |   0 Proposals
I need a estimate for website designed that will interface between internet users and local farmer to produce organic vegetable and organic fruit, and organic animals on real time. Users will go to the wed store buy the supplies. They get sent to the farmer with the order and the participants at the farm will process the order while been on surveillance cameras watched by internet users . As the products are ready, they are shipped to the users. I am an old school farmer and will respond better by phone 925 202 7918 Alexandre Machado
Category: Other - Engineering &...       

b****sta
 [?]
Sign in to view client's details.
| b****sta
|    United States
Fixed Price: Less than $500   |  Posted: Apr 15, 2014  |  Ends: 25d, 21h  |   14 Proposals
For this job our company is looking to build a trusting relationship with a business professional who is in close proximity to Bao'an, Shenzhen, China, 518126. We are working with a LED Lighting manufacturer who is based out of that area and we are looking for someone someone who can assist us by visiting the factory, inspecting the facilities, communicating in person with the factory representatives on our behalf, conduct pricing negotiations and perhaps assisting up with shipping arrangements. We will be working with various LED Lighting Manufacturers based out of China and ultimately we are looking to put together a team to help work with those manufacturers in order to facilitate large volumes of product sales to our Lighting Specialist, Electrical Contractor and General Contractor customers.
Category: Other - Engineering &...       

D****hew
 [?]
Sign in to view client's details.
| D****hew *
|    United States
Fixed Price: $25,000 - $50,000   |  Posted: Apr 15, 2014  |  Ends: 10d, 17h  |   19 Proposals
Our company is engineering a product for the consumer public. The device takes in information from sensory probes, converts the analog to digital then imputs to a software plateform. The platform must be server based as hundreds of smartphones will be accessing it. The application designed must be at a consumer level. Easy to use and simplistic, but beautiful. The budget for engineering, prototyping, and completion of total system is set at 50k All hardware and software must be developed for this amount. This product must be perfect. Our company will not settle for anything less.
Category: Other - Engineering &...       

t****mur
 [?]
Sign in to view client's details.
| t****mur
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 15, 2014  |  Ends: 10d, 7h  |   2 Proposals
In need of an individual fluent in Crystal Reports to create custom forms and reports for EPICOR ERP Implementation project
Category: Other - Engineering &...       
Preferred Location: United States

N****ver
 [?]
Sign in to view client's details.
| N****ver
|    United States
Fixed Price: Not Sure   |  Posted: Apr 15, 2014  |  Ends: 10d, 4h  |   16 Proposals
I need some basic instructions in Solid Works. need a few hours of instruction I will pay 15$ per hour
Category: Other - Engineering &...       

A****999
 [?]
Sign in to view client's details.
| A****999
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job