Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Less than $500   |  Posted: Jul 09, 2014  |  Ends: 3d, 20h  |   5 Proposals
This project is to create a PHYSICAL prototype of an iphone 5 cell phone case. At the minimum, the cellphone case should be light, thin and durable. 1) There should be a slight lip at the front case to provide drop cushion. 2) There will be a reflecting material or 'mirror' at the back of the case. I need someone who can manipulate the distance of the reflection based on my specification. For example, I might require the reflection of the mirror to be closer or further than regular mirror reflection. This 'mirror' need to be durable and scratch resistant. 3) The case should be well fitted and protect the phone securely. The power button and the bottom of the case should be protected. The case should not be too thick that might cause flash to bounce back and distort the image. The case should allow oversized headphone jack. The inner or outer edge should not be sharp that might injure user or scratch the phone. I can provide sample prototype design for clarification. NOTE: 1) ...
Category: Other - Engineering &...       
Skills: Manufacturing, Rapid Prototyping       
Preferred Location: North America

b****an1
 [?]
Sign in to view client's details.
| b****an1
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 05, 2014  |  Ends: 6d, 22h  |   12 Proposals
Seeking an expert in the nuclear energy field to write a report. My ex-wife is currently seeking to bring our children back to Japan to live with her parents in a city only about 150km from Fukushima. I am quite concerned that being that close, the radiation exposure and the danger of the radioactive water with no where to go will endanger my children's health and it would be in their best interest not to move back to Japan. I need a report briefly explaining in layman's language explaining what happened in Fukushima. I then need it compared to Chernobyl and how many multiples worse it is compared to Chernobyl. I also need the heath implications of those surrounding Chernobyl over the next few decades since the accident and how that applies to Fukushima. Furthermore, I need citations/sources for ever argument. Those sources must be solid without any bias. Lastly, I will need you to anticipate their arguments and poke holes in their argument whether it be logic, science or bia...
Category: Other - Engineering &...       

k****k72
 [?]
Sign in to view client's details.
| k****k72
|    Hong Kong SAR, PRC
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Jul 04, 2014  |  Ends: 6d, 13h  |   1 Proposal
java & android developer web design database Web Sites design . Java desktop application. Android developer. System analysis . Database design & development. Design by photoshop & flash. Excellent English speaking & writing. Working with team and lead them. Computer Maintenance software & hardware. Excellent experience in electrical panels(Distribution panels - star delta panels-ATS......). Good Knowledge in (circuit breakers- contactors-overloads.......). Experience in marketing & sales.
Category: Other - Engineering &...       
Skills: Android, Java, Javascript, Database, Android SDK       

D****aif
 [?]
Sign in to view client's details.
| D****aif
|    Egypt
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Jul 04, 2014  |  Ends: 6d, 7h  |   6 Proposals
Hi Andrew, I have use for someone with your expertise. I am interested in making a drinkable solution that contains citric acid. I would like to achieve a similar concentration of citric acid that would result from squeezing a lemon into a glass of water, so approximately about 2 grams of citric acid in about 350 milliliters. Is it possible to use pure citric acid as an additive and dilute it in water and store it? what would be the shelf life of such a solution? If instead of using pure citric acid, I had to use a citrate salt, I don't know what type of citrate salt would be best to use: citrate mono, di, or tri sodium? magnesium citrate? potassium citrate? is there another type of citrate that I am not considering? I am not familiar with the different tastes these compounds give to a solution. What type of flavoring could i add to make it taste better without affecting the citric acid? likely there are questions there are questions that I have not even considered. Conta...
Category: Other - Engineering &...       

a****mdv
 [?]
Sign in to view client's details.
| a****mdv
|    United States
Hourly Rate: Not Sure   |  Duration: 1-3 months  |  Posted: Jul 04, 2014  |  Ends: 6d, 7h  |   2 Proposals
Hi Andrew, I have use for someone with your expertise. I am interested in making a drinkable solution that contains citric acid. I would like to achieve a similar concentration of citric acid that would result from squeezing a lemon into a glass of water, so approximately about 2 grams of citric acid in about 350 milliliters. Is it possible to use pure citric acid as an additive and dilute it in water and store it? what would be the shelf life of such a solution? If instead of using pure citric acid, I had to use a citrate salt, I don't know what type of citrate salt would be best to use: citrate mono, di, or tri sodium? magnesium citrate? potassium citrate? is there another type of citrate that I am not considering? I am not familiar with the different tastes these compounds give to a solution. What type of flavoring could i add to make it taste better without affecting the citric acid? likely there are questions there are questions that I have not even considered...
Category: Other - Engineering &...       

a****mdv
 [?]
Sign in to view client's details.
| a****mdv
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Jul 04, 2014  |  Ends: 6d, 6h  |   0 Proposals
we are the company of gyanfinder we have urgent requirements for trainers who can teach online subjects :- .net php sap core oracle mobile app development bigdata development
Category: Other - Engineering &...       

g****ani
 [?]
Sign in to view client's details.
| g****ani
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 04, 2014  |  Ends: 6d, 4h  |   1 Proposal
Hello Trainers, We are the company of gyanfinder.we are very glad to inform that we have an urgent requirements of freelance corporate trainers if anyone are intrested please send their profile to   [obscured]  
Category: Other - Engineering &...       

g****ani
 [?]
Sign in to view client's details.
| g****ani
|    India
Fixed Price: $1,000 - $5,000   |  Posted: Jul 04, 2014  |  Ends: 6d, 4h  |   2 Proposals
Hello We are looking to hire a consultant that has experience in manufacturing bags - understanding all elements in the process (including machines, productivity benchmarks, etc...) is crucial. This is a short term project aiming at improving production processes in a manufacturing facility. Thanks
Category: Other - Engineering &...       

m****emk
 [?]
Sign in to view client's details.
| m****emk
|    Tunisia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 04, 2014  |  Ends: 5d, 21h  |   1 Proposal
I HAVE SOME AUDIO CODES MP202 I BOUGHT IT FROM " TALK FREE COMPANY " I DONT WANT ANYMORE THEIR SERVICE. I WILL PAY FOR HAVE THE PASSWORD. THANKS. Vincenzo
Category: Other - Engineering &...       

i****vip
 [?]
Sign in to view client's details.
| i****vip
|    El Salvador
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 03, 2014  |  Ends: 5d, 11h  |   4 Proposals
Hello I have a small VoIP company and I would like to make my own switch/PBX design. Attached are the details and a rough sketch of what I want. Please let me know if you are interested and let me know how long it will take and how much. Thanks,
Category: Other - Engineering &...       

m****021
 [?]
Sign in to view client's details.
| m****021
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 03, 2014  |  Ends: 5d, 3h  |   4 Proposals
Hi i have a website i want proof writing to be done for, i already have one but i want it completely revamped and new writing for it. The end customer will be general public and trade but the general public is a priority first.
Category: Other - Engineering &...       

z****234
 [?]
Sign in to view client's details.
| z****234
|    United Kingdom
Fixed Price: Not Sure   |  Posted: Jul 03, 2014  |  Ends: 5d, 0h  |   1 Proposal
I want a private web page that has a iTunes URL scraper that shows App name, App Image, App version, and App size. In addition, I want up to box data boxes that drop down when an iTunes link is entered to be scraped. These links will be the data links for external download. All these data boxes will be sent to three different sites by using an API. Disscussion on topic will be needed. Please PM me so we can talk.
Category: Other - Engineering &...       
Skills: HTML, PHP, HTML5, API, Data scraping       

O****cos
 [?]
Sign in to view client's details.
| O****cos
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 02, 2014  |  Ends: 4d, 19h  |   1 Proposal
All aspects of design and execution of drilling and blasting of rock for mining and civil construction.
Category: Other - Engineering &...       

t****a5t
 [?]
Sign in to view client's details.
| t****a5t
|    Australia
Fixed Price: Less than $500   |  Posted: Jul 02, 2014  |  Ends: 4d, 18h  |   2 Proposals
I need some expert one to conduct an experiment for me and then provide me the results. the experiment procedures in general is that, prepare some specimens of CFRP to do a double cantilever beam test and ENF test to measure Mode I and Mode II fracture toughness. if any one interested please contact me. Thanks
Category: Other - Engineering &...       

A****ker
 [?]
Sign in to view client's details.
| A****ker
|    Australia
Hourly Rate: $20 - $150 / hr   |  Duration: 1-2 weeks  |  Posted: Jul 02, 2014  |  Ends: 4d, 15h  |   1 Proposal
I have numerous questions about the aerial imaging business and need to speak with someone knowledgeable about how the aerial imaging business works. Specifically I need someone with one or more of these attributes: 1. Personal experience working at an aerial imaging firm 2. Knowledge of technical challenges faced with conducting aerial imaging operations. An example of a technical challenge is how to handle the vibrations of the aircraft. 3. Personal experience as a customer of an aerial imaging firm I am in need of someone with knowledge of the market and business dynamics of the aerial imaging sector for a 1-2 hour discussion initially.
Category: Other - Engineering &...       
Skills: Imaging       

P****sin
 [?]
Sign in to view client's details.
| P****sin
|    United States
Fixed Price: Not Sure   |  Posted: Jul 02, 2014  |  Ends: 4d, 11h  |   0 Proposals
I am looking for someone that can design and manufacture a pair of pants for .25 cents each pair USD. These can be VERY basic pants that either have a draw string or elastic waist. The materials can be discussed but we not picky about the material used either. We would like to mass order these if we can find the right person. PLEASE DO NOT INQUIRE IF YOU CAN NOT MAKE THE PANTS AND GET THEM TO US IN AMERICA FOR MORE THAN .25 CENTS USD A PAIR. We need the pants to cost us .25 cents flat. Please let us know if this is a job you would be interested. We can provide a lot of business and thousands of pairs of pants monthly if we find the right match.
Category: Other - Engineering &...       

m****888
 [?]
Sign in to view client's details.
| m****888
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 02, 2014  |  Ends: 4d, 11h  |   1 Proposal
Hi , I am a mechanical engineer and I need consultancy building an assembly machine. I dont have any mechanical design background. I have previously worked at mechatronics lab and I have software programming experience (Iphone - MAC - Matlab - Mathematica , C# - Lua AI etc) ... What I need is someone who teaches me how to design mechanical systems where and how to pick parts and communicate customer. So that I can learn and handle local jobs at the same time...
Category: Other - Engineering &...       

g****rsu
 [?]
Sign in to view client's details.
| g****rsu
|    Turkey
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: Jul 02, 2014  |  Ends: 4d, 6h  |   2 Proposals
Optimize and, where necessary, reorganize an existing technical proposal to be submitted to a large corporation (Insurance Industry). The scope of the work is in the $5M range. The proposal as currently written consists of (1) a general part giving an overview of the science and technology; (2) a list of subtopics with detailed description of the work to be done; (3) budgets for each subtopic and total budget. I'm looking for technical help to optimize the presentation, to organize it into manageable subsections, and to draft the budget(s)
Category: Other - Engineering &...       

F****und
 [?]
Sign in to view client's details.
| F****und
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 02, 2014  |  Ends: 4d, 5h  |   2 Proposals
We need an advisors who are familiar with importing/Exporting goods from Australia. Does not necessarily need to be specific to garment manufacturing. We are establishing a clothing label and need help understanding: - freight and taxes involved in importing goods into Australia from China - exporting a product for sale from Australia internationally - foreign exchange, how does it work? - how to adjust sales prices for international market? - researching courier freight companies, which will suit our needs? - easy methods of tracking our shipments and record keeping
Category: Other - Engineering &...       
Skills: Logistics & Shipping       
Preferred Location: North America, Eastern Asia, Australia/Oceania

k****550
 [?]
Sign in to view client's details.
| k****550
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jul 02, 2014  |  Ends: 4d, 1h  |   4 Proposals
I need an experienced person who can help me formulate a cutting edge new supplement that is mhra approve.One of them is a fat burner called thermo loaded and the other is called pre-workout formula called preload.This would be just the beginning as I would like to find someone to work with on an ongoing basis as I have lots of work kind regards grant
Category: Other - Engineering &...       
Skills: Blogs, Manufacturing, Biology       

A****d08
 [?]
Sign in to view client's details.
| A****d08
|    United Kingdom
Fixed Price: $200 - $300   |  Posted: Jul 01, 2014  |  Ends: 3d, 9h  |   22 Proposals
looking for contractor with strong skills and experirnce in SMPS layout design and using Altium program for schematic capture and layout design. step 1 includes pcb layout design and gerber files to send to the pcb house for manufacturing. number of layers - 2 number of pins - 328 number of components, smd - 164 number of nets - 110 dimensions - 3.9" x 5.9" x 0.06" I have: schematic in DipTrace and/or pdf format BOM in pdf, pcb drawing in dxf / dwg /pdf preliminary component placement in dxf / dwg / pdf pictures and gerber files for the similar pcbs designed earlier
Category: Other - Engineering &...       
Skills: Electronic Design, PCB Design       

v****isp
 [?]
Sign in to view client's details.
| v****isp
Fixed Price: Not Sure   |  Posted: Jul 01, 2014  |  Ends: 3d, 1h  |   9 Proposals
I can't go into too much detail here because this is a brand new clasp-less bracelet style, unique as well, and I don't want anyone stealing or altering the idea. The job includes; 1. making several of these bracelets for a negotiated price. 2. creating strong plastic or metal or rubber ends with our logo on them. 3. making a variety of colors, sizes, and patterns. 4. keep all the info confidential. 5. quick turnaround, because once we start we'll hopefully order constantly. It would also be great if we can also talk patenting, licensing, and distribution, but it's not needed. We'll eventually figure that out. I thought about going though alibaba merchants but we want our bracelets to be exclusive to us, I'm not against you using the tech in your own products if you get a patent registered under both our names and we both share in the licensing of our product to your other products, but I don't want these bracelets to be available outside of our company and the companies we will dis...
Category: Other - Engineering &...       

W****day
 [?]
Sign in to view client's details.
| W****day
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 30, 2014  |  Ends: 2d, 20h  |   6 Proposals
I need an expert in Chemistry. Someone who is good in organic, inorganic, physical and all aspects of chemistry. Check and confirm the questions below also. I need the answers, including the work to this question below: 1.A solution contains 40. mEq/L of C1- and 15 mEq/L of GPO4 2-. If Na+ is the only cation in the solution, what is the Na+ concentration, in milliequivalents per liter? 2.A solution containing 80.g of KCl in 200.g of H2O at 50C is cooled to 20C. a.How many grams of KCl remain in solution at 20C? b.How many grams of solid KCl crystalized after cooling?
Category: Other - Engineering &...       
Skills: Chemistry       

s****omp
 [?]
Sign in to view client's details.
| s****omp *
|    India
Fixed Price: Not Sure   |  Posted: Jun 30, 2014  |  Ends: 2d, 15h  |   2 Proposals
Sales and marketing professional (from Tel Aviv) looking for a new business opportunity. Ideally, I would like to be a representative of a big US/Europe/Japan/Korea based vendor with leading technology in a defined market and get some kind of exclusivity for specific territory. I'm a fast learner and I have an open mind, so I will consider almost any industry, as long as the average sale price is 5,000$ and up (I would like to earn a commission of 30%-40% per sale). I do not want to provide services. My selling skills are above average and I want to take advantage of that and spend my time selling tangible products or solutions people or companies really need. I would like to be able to sell via email and phone. It would even be better if I will be required to travel frequently to meet with big accounts and/or close big sales. I will incorporate this activity in my home based business to start with, and consider expanding it in the future. My target monthly income from this busin...
Category: Other - Engineering &...       

u****iam
 [?]
Sign in to view client's details.
| u****iam
|    Israel
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job