Save this Search
     

All JobsEngineering & Manufacturing

 (321 results)  
Sort by:
  • Posted Date
Fixed Price: $100 - $200   |  Posted: 1h, 55m ago  |  Ends: 14d, 22h  |   1 Proposal
The objective is to design and fabricate one or several circuit board(s) capable of collecting multiple vital signs (ECG, SpO2, Temperature). The design can be a new design or one that is based on an existing reference design if the requirements can be met. If a reference design is used, schematics and demo software/firmware will be provided by the freelancer. The requirements are: - Capable of measuring ECG, pulse oximeter (SpO2), and temperature - Use an embedded 32-bit microprocessor with DSP functionality - Data collection of ECG and SpO2 must be simultaneous or with a low, deterministic latency (<1ms) between ECG/SpO2 samples - Sampling of ECG/SpO2 should occur at a rate higher than 100Hz with a good signal-to-noise ratio - Communication over USB/RS232 to a PC host - Onboard storage for at least 10 seconds of ECG/SpO2 data - Powered by a +5V DC power supply. Preferably a USB port. - A touch or infrared sensor for temperature - Firmware/software program demonstrating the ...
Category: Electrical       

m****sia
 [?]
Sign in to view client's details.
| m****sia
|    United States
Fixed Price: $500 - $1,000   |  Posted: 4h, 1m ago  |  Ends: 14d, 19h  |   0 Proposals
Hi, i am looking for some one who can help & design complete hardware to insert text into cctv video camera. Input : from POS system link shows exact final output.   [obscured]  /watch?v=wzkPFapw88A Thanks.
Category: Electrical       

1****in9
 [?]
Sign in to view client's details.
| 1****in9
|    United States
Fixed Price: Not Sure   |  Posted: 5h, 35m ago  |  Ends: 14d, 18h  |   0 Proposals
I need a complete camera case design that meets standard carry-on requirements of all airlines. General specs for carry on are 22x14x9 inches and 15#. This bag needs to safely and securely house a dji phantom 3 (including controller, charger and 2 batteries), a canon rebel t3i with a 17-40 mm lens, an 8-15 mm lens, a gopro camera and some accessories such as cables, gorillapod, feiyu wearable gimbal and battery charger. Drones are usually housed in dense foam and camera gear is usually housed in padded compartments but I cannot find a design that will house both with required specs. Example of drone storage:   [obscured]  /HPRC-HPRC2700WPHA3FO-Custom-Phantom-Black/dp/B00ZL3F2UY/ref=sr_1_1?ie=UTF8&qid=1441242471&sr=8-1&keywords=phantom+3+foam&pebp=1441242470657&perid=1HW0BBTQNFNBSJFA2MNG Example of camera storage;   [obscured]  /products/shootout-backpack-le-small-black.aspx Prefer ability to switch out camera gear as necessary; so prefer hou...
Category: Product Design       

r****a15
 [?]
Sign in to view client's details.
| r****a15
|    United States
Fixed Price: Less than $500   |  Posted: 5h, 42m ago  |  Ends: 14d, 18h  |   2 Proposals
I am looking for a person to get me a few quotes on a custom made metal piece that I use in my manufacturing. The metal piece will need a quote that includes shipping to Kansas City
Category: Contract Manufacturing       

M****les
 [?]
Sign in to view client's details.
| M****les
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 13m ago  |  Ends: 14d, 17h  |   9 Proposals
Hello, I am looking to find an engineer who can create a box for me that has several features a.) A fixed cylinder like compartment that is apart of the inside of the box and sits on the right side wall. The Cylinder would be 2 inches wide and goes as deep as the box is (2 inches deep). b.) The box would have a floor that moves up and down. A screw at the bottom of the box will do this. This would mean that the box has two floors, the fixed floor and the floor on top that would raise the floor to the top of the box as you turn the screw. c.) The bottom fixed floor would have a 1-inch square indent in the center of the box that is where the head of the screw would be found. Box dimensions are 2 inches tall 8 inches long 5 inches wide I will provide a picture for assistance.
Category: 3D Modelling       

W****ots
 [?]
Sign in to view client's details.
| W****ots
|    United States
Fixed Price: $500 - $1,000   |  Posted: 8h, 4m ago  |  Ends: 14d, 15h  |   1 Proposal
A large scale CFD (Computational Fluid Dynamics) model is needed to set-up coupled multiphase modeling and 6DOF with dynamics moving meshing. Only expert (Ansys) applies for this. Thank you.
Category: 3D Modelling       

v****cfd
 [?]
Sign in to view client's details.
| v****cfd
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 2m ago  |  Ends: 2d, 14h  |   0 Proposals
Hello, I wanted to know if you could help me. I'm designing a new product that needs an internal power generation. My research has steered me towards "disc type axial flux generators /motors". See attached sketch idea. Basically I need a test bed to prove theory I have based on the contrasts that are given. I can't fully describe the entire design but part of it needs to generate electricity and output it to a outlet, which kind of mimics a typical low voltage wall outlet performance you would find at a normal house. The initial device constraints was to have a cylinder can design with a max diameter of 3.5 -5 inches, and have the device be very light weight, and requiring very little force to spin the axial flux inside. I have not specified a height yet this is all a idea in testing phase. What I'm requesting is a design or instructions to create a test bed in my shop and so I can build and tested it, the shape and design are critical. This is a generator, I will ...
Category: Electrical       

m****478
 [?]
Sign in to view client's details.
| m****478 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 10h, 17m ago  |  Ends: 14d, 13h  |   5 Proposals
HI, we need a licensed florida architect or engineer to draw a plan for a simple 24xx26x24 3 wall extension that ties into an existing house.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

D****ios
 [?]
Sign in to view client's details.
| D****ios
|    United States
Fixed Price: About $20   |  Posted: 10h, 22m ago  |  Ends: 14d, 13h  |   7 Proposals
I require someone with experience in converting images into a dxf file ready to laser cut. I will be using these on a bystronic laser. This will be a regular thing as im currently working on a few different projects & will require alot of images converting.. The images must be converted to a very high standard so that i can use the dxf file straight away without having to make adjustments to the file.
Category: CAD       

c****rds
 [?]
Sign in to view client's details.
| c****rds
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 10h, 22m ago  |  Ends: 2d, 13h  |   14 Proposals
We have done the floor plans in autocad and now we need to do the interior architectural elevation drawings for each of the 3 floors. I have the Autocad file for you to referance. We need this project done professionally and quickly. please let me know if your interested in this project as we need to start asap.
Category: CAD       
Skills: Drafting       

M****oup
 [?]
Sign in to view client's details.
| M****oup
|    Canada
Fixed Price: $25 - $75   |  Posted: 10h, 56m ago  |  Ends: 14d, 13h  |   1 Proposal
i need shoe patent drawing for shoe i have 3ds max model and i can share the drawings must be consistent with the USPTO standard please share some sample of previous work
Category: CAD       

e****yed
 [?]
Sign in to view client's details.
| e****yed
|    Egypt
Fixed Price: Not Sure   |  Posted: 11h, 6m ago  |  Ends: 14d, 12h  |   5 Proposals
I'll need someone who create a piece of software for me (including GUI). It won't be very complicated, it will required: -reading some data from an excel file -doing some basic calculations with that data (converting some times from minutes to second, doing average, etc) -Once that is done you'll have to do a number of iterations applying some special features (coeficients in each iteration, "if", etc) My budget is very limited for this one, approx $100 With regards to the time frame, I'm not in a hurry, so...let's say 2 weeks ? (hope this help to reduce the price) I will provide more details upon request. Cheers
Category: Mechanical       

p****785
 [?]
Sign in to view client's details.
| p****785
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 11h, 24m ago  |  Ends: 14d, 12h  |   16 Proposals
Hub less Bicycle concept drafted from my drawing to exact measurements, file must be fit to take to fabrication for a working model need finished in five days
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

K****ozi
 [?]
Sign in to view client's details.
| K****ozi
|    United States
Fixed Price: Not Sure   |  Posted: 12h, 22m ago  |  Ends: 14d, 11h  |   11 Proposals
I have an idea for a product, but can't seem to come up with the right design. I need the help of an expert to help complete the design. I will attach a list of what the product will have.
Category: Product Design       

t****093
 [?]
Sign in to view client's details.
| t****093 *
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 38m ago  |  Ends: 29d, 11h  |   2 Proposals
Imperium, Inc. is presently contract work by a Senior Mechanical Engineer with a minimum of 10 - 15 years of mechanical instrumentation and device experience. Experience to include full life cycle precision product development from concept into production, human engineering design, layout and drawing generation, working with vendors, validating prototypes, and providing sustaining assistance with production released products. 7 years Solidworks experience required. Handheld rugged instrumentation development experience preferred. Candidates must be in the Washington DC or Baltimore area. Candidate shall be capable of collecting and maintaining requirements in electronic format, developing concepts, design layouts, and calculations to support design concepts. Must have good communication skills, require little or no supervision, and possess exceptional creative skills. Optimal additional areas of experience include basic motion control and mechanism design, optical design and indu...
Category: Mechanical       
Skills: SolidWorks, 3D Design, Packaging Design, thermal       
Preferred Location: United States

b****ser
 [?]
Sign in to view client's details.
| b****ser
|    United States
Fixed Price: Not Sure   |  Posted: 12h, 47m ago  |  Ends: 14d, 11h  |   8 Proposals
Hello, I'm looking for mechanical engineering to join me on upcoming projects. Current project revolves around sheet metal housing. Only people with a strong portfolio will be considered. The ability to speak with me through SKYPE is a must. Thank you all for your time.
Category: Mechanical       
Preferred Location: North America

c****els
 [?]
Sign in to view client's details.
| c****els
|    United States
Fixed Price: Not Sure   |  Posted: 13h, 20m ago  |  Ends: 14d, 10h  |   6 Proposals
Run FEA on linkage castings as described by our engineer. Produce reports as requested by our engineer. Part files and description of FEA parameters will be provided. Please fill out and sign the attached nondisclosure agreement so that we can post the files and have you quote the job.
Category: Mechanical       
Skills: Finite Element Analysis       

r****may
 [?]
Sign in to view client's details.
| r****may
|    United States
Fixed Price: About $20   |  Posted: 13h, 22m ago  |  Ends: 14d, 10h  |   8 Proposals
I have got a floor plan from architect and want to convert the same into 3D. Total area of the plan is 58sq meter with two room, toilet, kitchen and stairs. Those who are expert in this can apply. You must be an architect. I will upload the PDFs of plan tomorrow. Regards
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

Y****pta
 [?]
Sign in to view client's details.
| Y****pta
|    India
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 14h, 28m ago  |  Ends: 14d, 9h  |   14 Proposals
I have some CAD models that are very basic, non-colored 3D models in the shape of trophies. I need to hire someone to add color and designs to them for use in a promotional video. There are three different trophy models, two just need to have color added and the third needs to have six different designs applied (baseball, basketball, soccer, golf, bowling, and tennis).
Category: CAD       
Skills: ArchiCAD, 3D Systems       

Q****dio
 [?]
Sign in to view client's details.
| Q****dio
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: 15h, 7m ago  |  Ends: 14d, 8h  |   4 Proposals
I have archicad 16 file. My bimx exporter doesn't work anymore, and I need someone to export it to bimx file. It is 10 seconds job.
Category: Architecture       
Skills: ArchiCAD, Architecture       

N****jza
 [?]
Sign in to view client's details.
| N****jza *
|    Serbia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 24m ago  |  Ends: 14d, 8h  |   37 Proposals
Hi, I am looking for a mechanical drafter to hire by the hour or piecemeal who is capable with Solidworks/CAD to generate some parts from scratch (based on our input) but also to manipulate existing drawings, make minor changes, and generate high quality renderings for marketing images.
Category: 3D Modelling       

h****hot
 [?]
Sign in to view client's details.
| h****hot
|    Canada
Fixed Price: Not Sure   |  Posted: 18h, 46m ago  |  Ends: 14d, 5h  |   10 Proposals
I have qty4 picking system racks that will need to be designed complete with drawings and part lists. I would need these designs complete in 1 week after awarded the job. I would prefer the designs be constructed with Solidworks. Attached are detailed specifications on each application. I also can provide pictures of existing applications once awarded the job. I must stress that i must have all designs completed in 1 week once awarded.
Category: 3D Modelling       

B****W32
 [?]
Sign in to view client's details.
| B****W32
|    United States
Fixed Price: Not Sure   |  Posted: 19h, 18m ago  |  Ends: 14d, 4h  |   0 Proposals
In the attached papers in ELISA, synthesized peptide or selected pool from library DNAs used. I want flowchart how library DNAs applied and used in ELISA. I am unwilling to use synthesized peptide.
Category: Chemical Engineering       

n****how
 [?]
Sign in to view client's details.
| n****how
|    Bangladesh
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job