Save this Search
     
Sort by:
  • Posted Date
CAD
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 6h, 0m ago  |  Ends: 14d, 17h  |   12 Proposals
We are looking to meet and build a long term relationship with an experienced agent, with years of sourcing products from China, Taiwan, and India. Looking forward to hearing from you.
Category: Product Design       

M****e-M
 [?]
Sign in to view client's details.
| M****e-M
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 6m ago  |  Ends: 14d, 17h  |   8 Proposals
I need someone to draft model drawings of kitchen cabinets, entertainment centers, etc from the designs I specify.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

a****lam
 [?]
Sign in to view client's details.
| a****lam
|    United States
Fixed Price: Not Sure   |  Posted: 6h, 36m ago  |  Ends: 14d, 17h  |   0 Proposals
Requirements Design and deliver Design Package which includes the following features: Three Capacitive Sense button configurations suitable for interfacing to an Atmel D2x controller 3 Buttons - 1 x 3 6 Buttons - 2 x 3 1 Button -1 x 1 An ambient light sensor with an I2C interface RGB uniform backlight with separate CMOS level control for each button Minimal number for orderable part numbers Input Deliverables from GOT Interface 6-Button 2D Drawing ( GOT Interface 6 Button.pdf) 3- Button 2D Drawing ( GOT Interface 3 Button.pdf) Image of all three Button Configurations (Custom Cap Touch 2.jpg) RGB LED Specification sheets (XZMDKDGCBD56W.pdf) Ambient Light Sensor Specification sheet (TSL45315) Output Deliverables to GOT Interface Design Package CapSense Circuit Schematics, Gerber files, Fabrication Drawing and Assembly Drawing. LED Circuit Schematics, Gerber files, Fabrication Drawing and Assembly Drawing. Light Guide Film 2D Drawings and 3D Drawings Zemax of other r...
Category: Product Design       

d****iba
 [?]
Sign in to view client's details.
| d****iba
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 6h, 58m ago  |  Ends: 14d, 17h  |   20 Proposals
HI all, I need 3 drawings completed for 3 electrical cabinets we are having built. Done in cad or illustrator or whatever. Just need to clearly communicate to overseas manufacturer. Attached is something similar used previously for another company. Attached also are photos. First cabinet: battery cabinet 1200 high x 600w x 350 d with 3 internal shelves to support max 75kg per shelf (total 4 batteries stored inside) (for indoor and outdoor installation) (2 x 32mm hole punched in each end of shelves) Air vents covered with vermin mesh (front bottom & back wall high) on skids for indoor and outdoor installation (silver colour paint finish) Second cabinet: battery cabinet 900 high x 1200 wide x 600 deep with 3 internal shelves to support max 400kg per shelf 2 x 32mm hole punched in each end of shelves (total 4 levels of batteries inside) (is it possible for all shelves to be removable?) (on skids for indoor and outdoor installation) Air vents covered with vermin mesh ...
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

h****ory
 [?]
Sign in to view client's details.
| h****ory
|    Australia
Fixed Price: Less than $500   |  Posted: 8h, 55m ago  |  Ends: 14d, 15h  |   7 Proposals
Need a design and drafted with dimensions floating boat Dock. The water is about 8 ft deep. Need a resource with experience. Please ask questions for clarification if needed. Attached is drawing provided by my customer.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

s****ina
 [?]
Sign in to view client's details.
| s****ina
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 11h, 1m ago  |  Ends: 14d, 12h  |   4 Proposals
Looking for a local industrial engineer to help us finalize a mold. We have version 1 of the mold complete and want to move to version 2 immediately. Located in Boca Raton.
Category: Product Design       
Skills: AutoCAD, 3D Systems       

H****Max
 [?]
Sign in to view client's details.
| H****Max
|    United States
Fixed Price: Not Sure   |  Posted: 11h, 7m ago  |  Ends: 14d, 12h  |   17 Proposals
Hey, I'm looking to get some blueprint drawings done for a 1250 sf space that will be added onto my house. This will be fixed price and should include up to 3 revisions. This also includes all the program files. I will supply a pintrest board of what I like and rough sketches.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

m****emy
 [?]
Sign in to view client's details.
| m****emy
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 12h, 0m ago  |  Ends: 14d, 11h  |   15 Proposals
I have a Basement Design project. I have existing plans , pictures and a description of the scope of the work . - We have to dig about 12- 15 inches to increase ceiling height , They also want a small powder room with a urinal a small wine celler in a corner storage closet ventilation for a smoking area surround system French drain and water proofing removal of azbestos pipe I need someone that can provide me with 1) Architectural Drawings of our existing conditions 2) 2 design layout options. ( we already have one that client likes and we will give it to you ) after we decide one one - 3)proposed plans, 4) sections and details 5) Construction Documents 6) Renderings 7) FFE we are a construction company and this might be a repeat gig - consider that when you bid . Also include samples of similar work .
Category: Architecture       

d****ing
 [?]
Sign in to view client's details.
| d****ing
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 13h, 28m ago  |  Ends: 14d, 10h  |   0 Proposals
My company is looking to expand into the fashion market. Currently, we are looking for a professional fashion designer to create the latest designs that can will turn heads in the market. We have a full team behind you!!!!
Category: Product Design       

S****rry
 [?]
Sign in to view client's details.
| S****rry
|    United States
Fixed Price: Not Sure   |  Posted: 14h, 24m ago  |  Ends: 14d, 9h  |   8 Proposals
looking for someone with experience with 3D CAD, but that has created molds for PVC plastics. our product is flexible and we need to find out best way to create the mold so as to make it work with certain types of manufacturing process'. please be local in new york city.
Category: Product Design       
Preferred Location: United States

d****lla
 [?]
Sign in to view client's details.
| d****lla
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 12m ago  |  Ends: 2d, 8h  |   10 Proposals
We are looking for someone to design, draft 3d photos, cad cam design for a fully operational innovative mechanical water pick for teeth. Due to the sensitivity and proprietary nature of the product design - a more detailed summary will be supplied to chosen elancer. Please submit your proposal and hourly rate for this project.
Category: Product Design       

b****ich
 [?]
Sign in to view client's details.
| b****ich
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 15h, 53m ago  |  Ends: 14d, 8h  |   3 Proposals
I am looking for someone to create sports wear for me from designs and fabrics selected by me. You will be sent designs, colours and fabrics, from this you need to be able to put them into a product.
Category: Product Design       
Skills: Manufacturing, Textile Engineering       

L****FiT
 [?]
Sign in to view client's details.
| L****FiT
|    United Kingdom
Fixed Price: $20 - $75   |  Posted: 16h, 1m ago  |  Ends: 6d, 7h  |   7 Proposals
I am looking for a complete design of a mobile Espresso Bar. After your design the carpenter will build the final product. WORK - PRODUCT A Mobile Espresso Bar (see attached pictures) Basis of the mobile espresso bar should be 1. a 1260x790mm kitchen island and needs to be adapted to it needs (for example an ikea stenstorp kitchen island). OR 2. Draw an own model This semifinished product has to be finished to a Mobile Espresso Bar. It should provide space for: Above Countertop :: Coffee Mashine (600x600x700mm (Width/Depth/Height)) :: Grinder :: Countertop Lid, straw and Condiment Organizers :: All kind of holes for supply (electric, water, waste etc) :: Refridgerator for cold drinks and/or take away cake/sandwiches smoothies :: a space where a customer can prepare his coffee, example to finish with sugar, stir and put a top on the cup. :: A space where the customer can drink the coffee. Can be made with one of the sideparts (see closing) :: any input or ideas will be great Belo...
Category: CAD       
Skills: 3D, 3D Modeling, AutoCAD, Manufacturing Design       

w****nfo
 [?]
Sign in to view client's details.
| w****nfo
|    Austria
Fixed Price: Less than $500   |  Posted: 18h, 53m ago  |  Ends: 14d, 5h  |   7 Proposals
I do require a drafting service if you are building a new home, renovating or extending your homes. looking for a Draftsmen who is trained to produce the necessary technical drawings that cover all aspects of such my project.
Category: Architecture       

C****ner
 [?]
Sign in to view client's details.
| C****ner
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 19h, 1m ago  |  Ends: 14d, 4h  |   8 Proposals
My wife and I have recently bought a lot in Virginia. We do not plan to build for a couple of years. My long term goal (with the help of a freelancer) is to come up with three to four designs with enough details that we can use the designs to get bids from builders. My immediate need, however, is to hire a freelancer who can help translate the plot plan into a terrain set up in Home Designer by Chief Architect. It is an odd shaped lot but I think I have the necessary GPS coordinates. Interested?
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

l****230
 [?]
Sign in to view client's details.
| l****230
|    United States
Fixed Price: Not Sure   |  Posted: 19h, 40m ago  |  Ends: 14d, 4h  |   28 Proposals
Looking for a skilled industrial product designer to design a plastic wine rack type product. Designer must also be skilled in photolistic product renderings. If this project works out, we will bring you on full-time for numerous other projects.
Category: Product Design       

r****968
 [?]
Sign in to view client's details.
| r****968
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: 21h, 17m ago  |  Ends: 2d, 2h  |   35 Proposals
We have an existing product that has grown over time from a set of basic drawings into something more complex, and now need to create a new set of CAD drawings for outsourced costing and manufacture.
Category: CAD       
Preferred Location: United Kingdom

s****son
 [?]
Sign in to view client's details.
| s****son
|    United Kingdom
Fixed Price: Less than $500   |  Posted: 23h, 3m ago  |  Ends: 2d, 0h  |   33 Proposals
Hi there, we need an awesome AutoCAD geek for designing a little piece of hardware with a PCB inside. The model will then be used for molding (Polycarbonate) We believe this job won't take longer than a day. We know, we know, it's just a small job, but hopefully there's gonna be more for the future. Details on request.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

S****men
 [?]
Sign in to view client's details.
| S****men
|    Germany
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: Jun 29, 2015  |  Ends: 13d, 19h  |   8 Proposals
Hello all, We need someone who is proficient in sketchUp and Layout. It is important that you understand both SketchUp and Layout in terms BIM. It is therefore important that you are able to model neatly and efficiently in SketchUp The job involves two buildings that are nearing the end of their design phases. We need assistance as we resolve the final details in SketchUp and then move onto producing technical documentation for the contractor. Your first task will be to set up Layout Drawings spaces for the models (Plans sections, elevations, details etc.) Thereafter you will be asked to aid us in preparing the models for representation. You will be required to resolve some details as well as identifying and eliminating anomalies and inaccuracies. We require that you work fast but if you are good at sketchup you should already be working fast enough. The two buildings in question are: 1) An industrial facility of 4000m2 with an attached office building of around 1000m2. 2) A Co...
Category: Architecture       
Skills: Architecture, SketchUp Pro, sketchUp Layout       

g****fvw
 [?]
Sign in to view client's details.
| g****fvw
|    Australia
Fixed Price: Not Sure   |  Posted: Jun 28, 2015  |  Ends: 13d, 18h  |   13 Proposals
Hello! I have a built a prototype for a bed frame and I want to have it produced by others. I need drawings made up to give to the manufacturer. I will provide photos of the prototype and hand sketches showing the dimensions. It is solid wood. No particle board or other such manufactured wood products. I need from the designer: 1. Drawings to provide the manufacturers for bids and construction 2. Creative input on how to make the bed easier to manufacture. 3. Input on how to make the bed less expensive to manufacture. 4. Input on how to make the bed easier for the consumer to assemble. Start date is not critical and delivery date is flexible. Thanks! Andy
Category: CAD       
Skills: 3D Modeling, AutoCAD, Manufacturing Design       

A****Kas
 [?]
Sign in to view client's details.
| A****Kas
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Jun 28, 2015  |  Ends: 5d, 13h  |   47 Proposals
I need someone to take my "technical" drawings, specifications, and ideas and turn them into CAD drawings that I can submit for prototyping and manufacturing. I've provided 85% of what is needed, I just lack the skill to get that last 15% done. There will be some assistance needed from you to determine fabrication material and tolerances. Currently, I have 8 drawings showing every component of the device and can work daily with you on any questions or specifics you need from me to complete the project. I would prefer someone to provide an hourly rate bid then we can discuss how many hours you will need to complete once you have had a chance to review the drawings and the scope of the project. I'm mechanically inclined, and have taken some engineering courses so I'll be able to partner with you until we get it right. If all goes well, future work can be awarded to you on a project by project basis. While timelines are fluctuating, I'd like to get the project started b...
Category: CAD       
Skills: AutoCAD, Manufacturing Design       

K****nis
 [?]
Sign in to view client's details.
| K****nis
|    United States
Fixed Price: $25 - $26   |  Posted: Jun 28, 2015  |  Ends: 13d, 12h  |   3 Proposals
Hi, I need you to source a company that can build me a custom LED to meet the exact spec below. I cannot accept anything different from the below specs so please do not ask if something similar will work. I am looking to buy 500 - 1000 that meet the below specs for prototyping in July and then 250 000 - 300 000 for our first 1000 unit production run in Sept. of our new product line. This SMD LED is not available as an off shelf product product so you will need to find a company who can build one to meet these specs. If you have no experience in sourcing or SMDs or LEDs do not apply for this job as you will be wasting your time and mine. Target Price Per Piece in USD - $0.05 SPECS a. 5mW Output b. 680nm +/- 5 bandwidth c. undiffused beam and uncollimated d. Continuous wave e. Less than 1 degree Temperature Change during 20 minute continuous operation f. No coverings over laser - EX: Lens Cap g. 2.1V, 8mA input Thank you, Mitchell
Category: Product Design       

R****met
 [?]
Sign in to view client's details.
| R****met
|    Canada
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job