Save this Search
     
Sort by:
  • Posted Date
Architecture
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 1h, 43m ago  |  Ends: 14d, 22h  |   0 Proposals
Project Management Multi-disciplinary, including the fields of mechanics, hydraulics, electronics and Fniaomatikh. ? exploring problems, and providing engineering solution. Accompanying the design up to the implementation and customer satisfaction. ? Preparation of models for analysis, and analysis during the planning application. Management and setting hydraulic experiments, according to national or international standards which include the measurement accuracy of the product, half explosion, testing life cycles, and so on. ? Work with suppliers and guidance at all stages of production. ? Preparation and presentation of design reviews. ? Performing strength calculations Solidworks Simulation software and analyzing failures. ? Engineering design of products for measuring water and accessories broadcast information includes: design of buildings, packaging, plastic injection design, casting design brass machining and preparation of manufacturing drawings. ? Manage project teams include: ...
Category: CAD       

T****gin
 [?]
Sign in to view client's details.
| T****gin
|    Israel
Fixed Price: Less than $500   |  Posted: 4h, 6m ago  |  Ends: 2d, 19h  |   2 Proposals
Your project is to: 1. Review an existing plan for a basement car park (8 vehicles) for compliance with all relevant Australian Standards for parking facilities, including AS2890. 2. Identify all non-compliant aspects. 3. Identify opportunities to reduce the length of the car park. 4. Provide feedback in writing.
Category: Architecture       
Skills: Architecture       
Preferred Location: Australia

C****nts
 [?]
Sign in to view client's details.
| C****nts
|    Australia
Fixed Price: Less than $500   |  Posted: 6h, 35m ago  |  Ends: 14d, 17h  |   7 Proposals
We would like one large space including the kitchen,walk in pantry, dining & family room redesigned with ready to go plans for getting quotes. In this plan we would also like the floor one level, the back door and steps taken out to be replaced with one large wall with sliding door. You will need to view, Greensborough VIC 3083
Category: Architecture       
Skills: Architecture       

K****red
 [?]
Sign in to view client's details.
| K****red
|    Australia
Fixed Price: Less than $500   |  Posted: 8h, 9m ago  |  Ends: 14d, 15h  |   17 Proposals
I need a clamp designed in CAD basically identical to this product but in 7/8" size so the factory can produce it for me.   [obscured]  /productselection.asp?Product=2035-320 Is that something you can help me with?
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

M****240
 [?]
Sign in to view client's details.
| M****240
|    United States
Fixed Price: Less than $500   |  Posted: 8h, 33m ago  |  Ends: 14d, 15h  |   8 Proposals
Need a professional packaging design ( household items/ appliances and sports accessories ) with product photos,
Category: Product Design       

m****see
 [?]
Sign in to view client's details.
| m****see
|    United States
Fixed Price: $2,000 - $3,000   |  Posted: 8h, 52m ago  |  Ends: 14d, 15h  |   5 Proposals
Freelancer full time over internet. To translate CAD Drawings into REVIT, coordination with client for relevant drawings, creating a report of clashes, creating a 3 D model and perspective, calculating quantities, creating families on request, animation and perspective
Category: Architecture       

n****rco
 [?]
Sign in to view client's details.
| n****rco *
|    India
Fixed Price: $1,000 - $5,000   |  Posted: 11h, 37m ago  |  Ends: 14d, 12h  |   3 Proposals
Need a device created that can track and count people entering and exiting an area such as a store or restaurant. The device also needs to be able to send information to a server
Category: CAD       
Skills: 3D Modeling, AutoCAD       

M****son
 [?]
Sign in to view client's details.
| M****son
|    United States
Fixed Price: $300 - $1,000   |  Posted: 12h, 16m ago  |  Ends: 14d, 11h  |   9 Proposals
Project Scope: 1. Design a food container which does not infringe on USA patents. 2. Project includes 3 food containers, which will require 3 files to provide to manufacturer to produce the mold. (CAD File, Measurements, Drawings, etc) 3. Must have experience in the food service industry. Thanks and look forward to working with you. Feel free to ask for sample pictures of the design work and we'll discuss through PMB.
Category: Product Design       

t****mps
 [?]
Sign in to view client's details.
| t****mps
|    United States
Hourly Rate: Not Sure   |  Duration: 4-6 months  |  Posted: 13h, 59m ago  |  Ends: 29d, 10h  |   1 Proposal
The Project Engineer manages critical external resources and owns the execution of contract design efforts. Location: New Jersey Responsibilities: Direct and supervise design consultants and contract design partners. Own the product development for contract design engineering activities and ensure that products meet market window timelines and required specifications (On-Time; On-Spec; On-Budget) Manage multiple concurrent engineering projects to meet schedule and budget targets Oversee the engineering designs and testing to ensure conformance to product specifications Ensure adherence to ISO standards during the design and development process Present engineering plans and status updates to project stakeholders Direct engineering support of sales and manufacturing operations comprising applications development, product installation, troubleshooting, and 8D analysis Ensure adherence to contract engineering department budgets Demonstrate effective leadership skills in inspiring, drivin...
Category: Product Design       
Preferred Location: United States

a****ali
 [?]
Sign in to view client's details.
| a****ali
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 14h, 18m ago  |  Ends: 14d, 9h  |   9 Proposals
Seeking experienced CAD person for drafting of detailed plumbing shop drawings. We will require approximately 60 shop drawings that are similar in degree of complexity as those included here.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Plumbing       

e****and
 [?]
Sign in to view client's details.
| e****and
|    United States
Fixed Price: Less than $500   |  Posted: 15h, 2m ago  |  Ends: 14d, 8h  |   6 Proposals
I am lookign for someone to put this design into a 3d model and perhaps an stl. file for 3d printing. The dimensions for the plastic pocket enclosure should be roughly: 3.5" wide interior overall outer dimension 4.0" 1" high interior, overall outer dimension 1.25" .375" overall enclosure thickness The Hardplastic enclosure should have a slight bow to take the shape of the thigh. The design should incorporate a .5" soft plastic or nylon flange for sewing into a garment such as on a pair of shorts. Please let me know the cost and how quickly to complete. Thank you
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

r****ck3
 [?]
Sign in to view client's details.
| r****ck3
|    Costa Rica
Fixed Price: Less than $500   |  Posted: 15h, 3m ago  |  Ends: 14d, 8h  |   5 Proposals
I am lookign for someone to put this design into a 3d model and perhaps an stl. file for 3d printing. The dimensions for the plastic pocket enclosure should be roughly: 3.5" wide interior overall outer dimension 4.0" 1" high interior, overall outer dimension 1.25" .375" overall enclosure thickness The Hardplastic enclosure should have a slight bow to take the shape of the thigh. The design should incorporate a .5" soft plastic or nylon flange for sewing into a garment such as on a pair of shorts. Please let me know the cost and how quickly to complete. Thank you
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

r****ck3
 [?]
Sign in to view client's details.
| r****ck3
|    Costa Rica
Fixed Price: $500 - $1,000   |  Posted: 16h, 14m ago  |  Ends: 29d, 7h  |   0 Proposals
Arlo Skye is a startup. We are obsessed about bringing back desirability in luggage. We believe that luggage shouldn't just be a boring utility, but in fact a reflection of your appreciation of aesthetic and good taste. And we believe that all this should not cost you an arm or a leg. We are starting this journey by manufacturing two products from the same family: 2-wheeled and 4-wheeled Carry On. We have just finalized the 3D external design of the 2 wheeled and 4 wheeled carry on. We are now searching for a talented pattern maker who a basic understanding of engineering. You also need to have a basic understanding of hard-luggage construction. Both of the carry-ons will have an internal ABS Plastic light weight internal frame, and encased by PVC coated cotton canvas, with a leather trim, pockets, and zips. This is a chance for you to make a real difference in peoples lives by designing something incredible. What you'll do: - You will create manufacturing ready desig...
Category: Product Design       

a****kye
 [?]
Sign in to view client's details.
| a****kye
|    United States
Fixed Price: Not Sure   |  Posted: 16h, 41m ago  |  Ends: 14d, 7h  |   2 Proposals
Our product will monitor soil conditions and perform actions based on the measurements. Using an app (Android, iOS, and web based), users can specify triggers for notifications when the soil is outside of the acceptable range (for example, if the temperature is approaching freezing, or soil pH is getting too high). The app will also access the historical data that will be stored via the web to track growth and associate pictures taken. We would like the device to meet the following requirements: Sensors Temperature:range from -40 to 140, accuracy of 1 Humidity: range from 0 to 100% RH accuracy of 2% Barometric pressure Light intensity: range from full daylight to night using photoresistor or solar panel to detect Soil pH: range of 4.5 to 9.5 pH, accurate down to 0.5 Enclosure Waterproof Weatherproof & UV resistant 3"x3"x2" maximum dimensions (not including any probes that would go into the soil) Replaceable battery (AAA or AA size) Data The device should tra...
Category: Product Design       

P****lue
 [?]
Sign in to view client's details.
| P****lue
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 19h, 0m ago  |  Ends: 14d, 4h  |   10 Proposals
I have STP files that need to be reviewed for pre production for injection molding. This is a one piece prototype that I just need to make sure that I will be able to have a mold mass produced.
Category: Product Design       
Skills: Manufacturing Design       

t****971
 [?]
Sign in to view client's details.
| t****971
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 4-6 months  |  Posted: 20h, 58m ago  |  Ends: 14d, 3h  |   0 Proposals
Hi, We're a UK based footwear manufacturer and retailer. We're looking for someone to search and source manufacturers in Europe for a number of private label products. Tasks will include - thorough online research to find product suppliers - contacting and liaising with manufacturers - making sourcing decisions - negotiating costs and production schedules Opportunity for additional design related responsibility and input into brand product design and selection. Preferred attributes of candidates - - Experience and understanding of the buying and sourcing process - Candidates based in Europe as the majority of our suppliers are Europe based - Candidates based in Portugal/Spain or UK is preferable - Knowledge of Portugal/Spain manufacturing regions - Multilingual - Portugese/Spanish ideally - Can Google
Category: Product Design       

h****orc
 [?]
Sign in to view client's details.
| h****orc
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 22h, 6m ago  |  Ends: 14d, 1h  |   9 Proposals
I am developing a line of candy. I am to the point I need character designs for product. I am looking to have 6-12 characters designed and drawn up so I can get them 3d printed and manufactured. These will be mounted to a specialized ring piece. I would like to get a quote for the entire project.
Category: Product Design       

D****ard
 [?]
Sign in to view client's details.
| D****ard
|    United States
Fixed Price: Not Sure   |  Posted: 22h, 14m ago  |  Ends: 29d, 1h  |   17 Proposals
I want to buy existing modern houses designs. Designs must be complete, including detailed drawings in CAD, Revit, ArchiCad or similar architecture software. Also 3D model and rendering of your design must be provided. Please do not offer drawings in PDF.
Category: Architecture       

M****nia
 [?]
Sign in to view client's details.
| M****nia
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: 22h, 39m ago  |  Ends: 14d, 1h  |   6 Proposals
Hi, I am looking for someone to put a planning application together for a new window to fit into an existing house. The property is situated in Auckland, New Zealand so some insight into New Zealand planning regulations may be handy but not absolutely necessary. I already have some CAD drawings of the property but these will need to be worked up to a higher level. I also have the original drawings which can be used along with photos to complete the propose drawings. I will require 1 site plan 2 x floor plans Elevations and any other documents which will be required.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

a****ton
 [?]
Sign in to view client's details.
| a****ton
|    United Kingdom
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: May 22, 2015  |  Ends: 13d, 23h  |   9 Proposals
Hi! I'm looking for someone to design a 3D Model of a steel structure indoor golf range. This is going to be a three level structure with sitting areas on all three levels. Let me know if you are interested and i'll give you more details,
Category: Architecture       
Skills: Architecture       

A****xck
 [?]
Sign in to view client's details.
| A****xck
|    United States
Hourly Rate: Less than $10 / hr   |  Duration: 1-2 weeks  |  Posted: May 22, 2015  |  Ends: 13d, 23h  |   8 Proposals
Need a freelancer to produce manufacturing drawings. The modeling and the assembly is ready with us. The freelancer must have experience in Creo3.0 work environment. The rest details will be given only after signing the NDA.
Category: CAD       
Skills: 3D Modeling, AutoCAD, Industrial Design, Pro-E       
Preferred Location: India

d****k28
 [?]
Sign in to view client's details.
| d****k28
|    India
Fixed Price: Less than $500   |  Posted: May 22, 2015  |  Ends: 13d, 21h  |   10 Proposals
I am looking for someone who can take a set of 2D drawings and convert them into a 3D Revit model using specifications provided. Providing all the outputs which are required for submission to UK Building Control (Construction Drawings). An important output here is to create schedules and material takes offs therefore freelancer must have a good knowledge of what is needed to input the correct information needed to export accurate material take offs and schedules. (As mentioned, information about the building will be provided in specifications) I will also be looking for 3D external outputs. Applicant must have experience with this type of work and examples to demonstrate. Drawings can be provided upon request. Please apply with example of relevant work.
Category: Architecture       

P****BIM
 [?]
Sign in to view client's details.
| P****BIM *
|    United Kingdom
Fixed Price: Not Sure   |  Posted: May 22, 2015  |  Ends: 13d, 17h  |   33 Proposals
Hello, I'm looking for a CAD designer with experience in enclosure design. The device I'd like created is an electronic padlock. I have an aesthetic design that I'd like converted into a CAD so I can present it to manufacturers. Looking for someone that has experience with glass, plastic, aluminum, and chrome.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

s****ent
 [?]
Sign in to view client's details.
| s****ent
|    United States
Fixed Price: Not Sure   |  Posted: May 22, 2015  |  Ends: 13d, 16h  |   2 Proposals
Marko - I want you to design this. You're very talented. Please let me know: We are in need of an industrial designer to design a mobile food/concession cart that sells pre-packaged food and drinks at smaller Broadway-type theatres. The cart will be stationed in the lobby of the theatre. Design Thoughts Overview Most food carts and concession areas are ugly, tasteless, and clunky. This "cart" should be the most beautiful structure these customers have ever seen in a small theatre setting. The form must connect with the classical, historical, and artistic emotion of the superb playwriting that is experienced at Broadway type theatres. It cannot be too showy or flamboyant, and blend in nicely with its environment. it should also resonate a cutting edge, sleek, sophisticated, seamless, and elegant design that is beautiful, warm and inviting. The theatre lobbies are small. Smaller theatres do not have concession areas because there is not enough physical space, so our so...
Category: Product Design       

c****ac2
 [?]
Sign in to view client's details.
| c****ac2
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job