Save this Search
     
Sort by:
  • Posted Date
Civil & Structural
Fixed Price: $1,000 - $5,000   |  Posted: 1h, 8m ago  |  Ends: 14d, 21h  |   6 Proposals
We are a manufacturer of a unique line of manhole covers and need technical spec sheets and CAD files for Architects and Engineers to use and refer to when selecting our products for use in their projects. We have attached some samples of our square cover spec sheets we are not happy with. We want to move towards a more professional sheet and drawings such as those in the round SpecSheetExample (see attachments)
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

R****ife
 [?]
Sign in to view client's details.
| R****ife
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 2h, 15m ago  |  Ends: 14d, 20h  |   2 Proposals
Xilinx, Altera based Fpga, asic and SOC design. Vhdl, verilog, SystemC and Schematics based design capability.
Category: Product Design       
Skills: Manufacturing Design, Electronics       

m****tas
 [?]
Sign in to view client's details.
| m****tas
|    Turkey
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: 5h, 53m ago  |  Ends: 14d, 17h  |   6 Proposals
Refine stl. files for manufacture utilizing plastic injection molding. Applying proper draft, gate location, feature sizes, under cuts, wall thickness, and sink. complexity low
Category: Product Design       

m****_50
 [?]
Sign in to view client's details.
| m****_50
|    United States
Fixed Price: $20 - $25   |  Posted: 6h, 15m ago  |  Ends: 14d, 16h  |   6 Proposals
Need two views: one horizontal and one vertical, both along the longest side of building structure. Need North, South , East and West side views Specifications Center of roof is 1" higher than both ends Height of structure 12? Screen clipping taken: 3/3/2015 1:58 AM Elevation of steps 6? Height of windows 36? and 36? from base Length of windows 5? Height of doors 8? Width of floor tile 10? Thickness of roof 6? Length of bathroom windows 24? Height of bathroom windows 24? from roof eaves roof 26? Elevation of laundry floor 6? Drawing attached.
Category: CAD       

j****mon
 [?]
Sign in to view client's details.
| j****mon
|    Puerto Rico
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 6h, 22m ago  |  Ends: 14d, 16h  |   20 Proposals
I have a sketched concept and built prototype and now I need the blue prints. Looking for .dwg / 3d model I can submit to a parts manufacturer to produce my product.
Category: CAD       
Skills: AutoCAD, 3D Design, 3D Rendering       

e****l33
 [?]
Sign in to view client's details.
| e****l33
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 8h, 6m ago  |  Ends: 14d, 14h  |   5 Proposals
Hi, I will have DSP engineering job available soon. Please send me ypur email address and phone number. My engineer will contact you soon. Regards, Punch
Category: Product Design       

l****art
 [?]
Sign in to view client's details.
| l****art
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 9h, 24m ago  |  Ends: 14d, 13h  |   49 Proposals
Re Draw house plans in AUTOCAD. Draw floor plan and front elevation from scanned drawings. The drawings are old however most dimensions are visible.
Category: Architecture       
Skills: AutoCAD       

u****989
 [?]
Sign in to view client's details.
| u****989
|    United States
Fixed Price: Less than $500   |  Posted: 9h, 26m ago  |  Ends: 14d, 13h  |   7 Proposals
I need an experienced CAD draftsman to provide technical shop drawings for a sofa for production. We require Plan, Side, And Section Views and All callouts for details. Only experienced draftsperson should apply. Please provide resume and include examples of your work. Must complete the job within 2 days. Hiring now!
Category: CAD       
Skills: AutoCAD, CAD/AutoCAD       

y****ddy
 [?]
Sign in to view client's details.
| y****ddy
|    United States
Fixed Price: Not Sure   |  Posted: 9h, 54m ago  |  Ends: 14d, 13h  |   3 Proposals
interested in contracting out with a design firm to help come up with 3d model/CAD and then prototype of watch bands for the Apple Watch band strap I own a watch company that has watches with stone faces (plugandfeather.com) Interested in potentially starting with bands that have links made out of stones
Category: Product Design       

s****007
 [?]
Sign in to view client's details.
| s****007
|    United States
Fixed Price: Less than $500   |  Posted: 12h, 51m ago  |  Ends: 14d, 10h  |   13 Proposals
I need to get some different digital mock ups of a house. I am not sure where to post this job. I have plans for house and some images of just framing. Not sure how we want it designed so we want to get some mock ups such as one with smooth stucco one with wooden siding ect. maybe 2-3 different options. hope to find someone for the job!
Category: Architecture       

C****s10
 [?]
Sign in to view client's details.
| C****s10
|    United States
Fixed Price: $5,000 - $10,000   |  Posted: 13h, 19m ago  |  Ends: 14d, 9h  |   40 Proposals
We will be preparing 110 standardized site maps that indicate property boundaries, building boundaries, and other specific labels - a sample of a final map document will be provided as requested. Blank .dwg files, a standard map template, and paper marked maps will be provided. Selected contractor will be responsible for: 1. Importing existing blank .dwg files into the standard template Autocad format. 2. Modify the Autocad maps in the standard map format to add site boundaries, building boundaries, and other labels as identified in paper annotated scans that will be provided for each site. Contractor will be responsible for a high level of accuracy for the maps provided. We will provide a quality assurance review of all map materials for accuracy, and anticipate that the selected contractor will correct any mistakes as part of this project.
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

A****orp
 [?]
Sign in to view client's details.
| A****orp
|    United States
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 13h, 50m ago  |  Ends: 14d, 9h  |   9 Proposals
Want inexpensive conceptual CAD drawings of an unusual home. This house will be a metal quonset building (Q or S shape) with normal interior housing built out inside including upstairs and downstairs. Will provide you with rough sketch(s) of what is desired, I will then need you to provide correct (or suggested) sizes for door openings, hallways, stairs, etc. I will provide some sample pictures. Need experienced architect so you can provide ideas/input if you see areas for improvement. My intention is to take these conceptual drawings to a local architect for preparation of final, stamped drawings for local building department.
Category: Architecture       

O****000
 [?]
Sign in to view client's details.
| O****000
|    United States
Hourly Rate: $10 - $20 / hr   |  Duration: Not Sure  |  Posted: 14h, 42m ago  |  Ends: 2d, 9h  |   9 Proposals
Hi, I have a patent request outstanding and am keen to get this translated into a photorealistic rendering picture and animation for crowd funding purposes. Are you ok to sign a non-disclosure agreement while the patent is pending? Could you give me indicated cost for the following: 1) 3d mechanical product design, modelling and photorealistic rendering based on very simple 2d sketches (drone visualization) 2) 3d animation to explain the drone concept Regards, Martin
Category: Product Design       

M****xxx
 [?]
Sign in to view client's details.
| M****xxx
|    Netherlands
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 13m ago  |  Ends: 14d, 7h  |   2 Proposals
PROJECT ADDRESS: San Francisco, California REQUIREMENTS: Engineer license to practice in the State of California. AIA Architect. PROJECT SCOPE & PROGRAM: The project involves an addition to the existing two-unit flats. The lower unit at ground floor shall become a three-bedroom and two-bath unit with addition of two more bedrooms. The upper unit shall have four bedrooms and three baths. The total added areas shall be around 1,200- 1,400 square feet. The 3rd story shall be a master bedroom. SCHEDULE OF SERVICE: Architect shall perform the following basic services. A: Schematic design: based on Owner's program for Owner's reviews. Several schemes shall be presented to Owner. Note: Site measurements with existing building schematic shall be furnished. Rear set-back and height code requirements will be furnished. B: Design Development: The complete set of architectural drawings based on the agreed design scheme for Owner's reviews and approval. C: Construction Documentati...
Category: Civil & Structural       

s****rph
 [?]
Sign in to view client's details.
| s****rph
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 15h, 58m ago  |  Ends: 14d, 7h  |   3 Proposals
we are looking for someone to help us studying the environment aspect of a state/Mall/building i.e noise, vibration etc...
Category: Civil & Structural       
Skills: Architecture, Civil Engineering       

F****i_i
 [?]
Sign in to view client's details.
| F****i_i
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 36m ago  |  Ends: 14d, 6h  |   4 Proposals
We are looking for someone to help us on traffic impact study Someone with a lot of experience in different tools, knows what he is doing, can present his finding well, written and spoken English
Category: Civil & Structural       
Skills: Civil Engineering, Traffic study       

F****i_i
 [?]
Sign in to view client's details.
| F****i_i
|    United Kingdom
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 18h, 40m ago  |  Ends: 14d, 4h  |   1 Proposal
I am looking to get a few things quoted before moving on to the actual development phase. First, here is a description of what I need... PRODUCT: Soundproof drum mat designed to significantly reduce decibel levels put out by an acoustic drum kit Main benefit: Achieve results of a soundproofed room in a drum mat (in other words, the highest level of soundproofing possible) DESCRIPTION: The idea was to develop a mat or platform that your entire drum kit would sit on. Measurements: 6 - 1/6 ' x 5' (length x width of my drum kit) Height / thickness doesn't matter and depends on the necessary layers of soundproofers needed to achieve the results Like standard drum mats it should be - Mobile - Easy to set up - Durable (in fact more durable than standard drum mats) - Protects drums - Slip proof (for you and your drums) Please see the product research I had done for more information, plausibility, and ideas. And please ask questions as needed. Before moving forward, please tell m...
Category: Product Design       

T****zur
 [?]
Sign in to view client's details.
| T****zur
|    Canada
Fixed Price: $1,000 - $5,000   |  Posted: 19h, 21m ago  |  Ends: 40d, 3h  |   4 Proposals
Estoy buscando un arquitecto freelance que pueda realizar un Proyecto de Ejecución para solicitar el acta de replanteo y empezar urgentemente una obra. También necesitaré un arquitecto técnico/aparejador para realizar la dirección de la obra una vez se inicie. Se trata de un proyecto de ejecución de un unifamiliar el Mungia (Vizcaya) y también si lo podría tener preparado y visado para el día 31 de Marzo ya que vence el plazo de la licencia municipal para edificar en el terreno. Será una construcción con estructura de madera. Mandaré a un fabricante hacer la estructura incluyendo aislamiento de 200 mm de lana de roca y carpinteros que me la montarán. Luego, contrataré los gremios uno a uno, para ejecutar cada partida. Me gustaría acercarme mucho a los criterios Passivhauss, sé que llegar a los criterios de la certificación puede llegar a encarecer la obra por lo que si vemos que nos podemos pasar el presupuesto valoraríamos el quedarnos cerca del estándar sin llegar a alcanzar los ...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: Spain

m****ako
 [?]
Sign in to view client's details.
| m****ako
|    Spain
Fixed Price: Not Sure   |  Posted: 20h, 19m ago  |  Ends: 14d, 2h  |   4 Proposals
Flooring contractor needs an estimator that is experienced and knows how to use the software RFMS Measure. This is an excellent opportunity but you must have experience and know how to use this software. We are a 20 year old company and are growing rapidly. Please respond as soon as possible, thank you!
Category: CAD       
Skills: Computer-Aided Design       

X****ego
 [?]
Sign in to view client's details.
| X****ego
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 20h, 48m ago  |  Ends: 14d, 2h  |   4 Proposals
Need to generate structural calculations for aluminum windows curtain wall enclosures. Need to seal with New York state license. Describe your experience in the past to show similarity to this type of work. Provide cost. By sending a window layout with it's cross sections the engineer should review the profiles used if it's ok he should approve it, also the engineer should specify if the anchoring detail is good, what screw to use etc. Attached is a file to give an idea what i need.
Category: Civil & Structural       
Skills: AutoCAD       
Preferred Location: United States

M****gns
 [?]
Sign in to view client's details.
| M****gns
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 20h, 56m ago  |  Ends: 14d, 2h  |   7 Proposals
Technical expert in culverts and structures galvanized corrugated steel multiple plates bolted. Feasibility and preliminary development projects various.
Category: Product Design       

d****ari
 [?]
Sign in to view client's details.
| d****ari
|    Italy
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 21h, 13m ago  |  Ends: 14d, 1h  |   11 Proposals
Hi, We have two plans that we need the garden, interlock, sod, etc. areas taken off. Is this something that you would have time to do this week? Thanks
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

T****J_O
 [?]
Sign in to view client's details.
| T****J_O
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 23h, 8m ago  |  Ends: 13d, 23h  |   5 Proposals
I need a CNC file - in Artcam for 2 countertop Bookmark displays. I am attaching photo and similar design drawing for Gift Cards. Bookmarks are 1.5" wide by 7" high. I need one display to hold 6 bookmarks and one display to hold 12. I would like the dividers NOT to protrude beyond the bottom faceplate so I can engrave or print on that piece. Material to be made from Standard 6mm Baltic Birch Plywood and fabricated with a CNC Router Please ask if you need more information
Category: Product Design       
Skills: 2D Design, CNC Programming       

w****rnh
 [?]
Sign in to view client's details.
| w****rnh
|    United States
Fixed Price: Not Sure   |  Posted: 23h, 21m ago  |  Ends: 13d, 23h  |   36 Proposals
we need an architect to help us with two floor plans and elevations Here attached somes sketches to show you what we want, you can improove it as you like. we will need the project in DWG format( autocad)
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

j****ion
 [?]
Sign in to view client's details.
| j****ion *
|    Tunisia
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job