Save this Search
     
Sort by:
  • Posted Date
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: 20 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
We are looking for complete quantity take-offs for millwork, Cabinets, Trim and woodwork from the detailed plans.
Category: Architecture       
Skills: Architecture, AutoCAD, Interior Design       

s****jay
 [?]
Sign in to view client's details.
| s****jay
|    United States
Fixed Price: $600 - $800   |  Posted: 26 minutes ago  |  Ends: 14d, 23h  |   0 Proposals
I need an experienced architect or house designer with good knowledge of CAD to complete a set of house plans that I have started. I already have the following in CAD files which are nearly complete and I can provide you with the files: Site Plan Foundation Plan Roof Plans Floor Plans Elevations I'm looking for a US based architect or designer who is knowledgeable with IRC and IBC and who can provide relevant codes on the the plans and who can put together a complete set of plans that is ready to submit for a permit. Since a lot of the work has already been completed, I'm looking to complete this job within 7-10 days at the most. You should be available online daily for communication and to answer questions. I do not work with any kind of upfront payment so if that is your requirement, this job is not for you.
Category: Architecture       

t****079
 [?]
Sign in to view client's details.
| t****079
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 1h, 1m ago  |  Ends: 2d, 22h  |   1 Proposal
RFQ for Quantity Takeoff of: 28 Unit Townhouse complex multiple buildings, approximately 5 unit types Foundation Walls Chimneys Exterior Walls, Vinyl Siding Exterior Walls, Brick Siding Exterior, Window Assemblies Exterior Doors Exterior - Patio Doors, Sliding Garage Doors (Twnhse) Pitched, Asphalt Shingle Eavestroughs and Downspouts Fascia Board Flashing (Siding, Windows, Eaves) Caulking and Weatherstripping Exterior Painting Lobby Redecoration Electrical Services and Distribution Exterior Lighting Fencing - Wood Patios and Walkways - Concrete Pavement Asphalt Hard Landscaping Soft Landscaping Perimeter Drains Services and UG Piping Quantity takeoffs from drawings: Scale drawings, please provide scaled baseline on output Provide quantities and some method of verifying accuracy of takeoffs Provide descriptions of each component in as much detail as allowed by available info A sample description would be as follows: Perimeter Fencing ┐ The fencing consists of solid cedar planks, 2....
Category: CAD       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

d****853
 [?]
Sign in to view client's details.
| d****853
|    Canada
Fixed Price: Not Sure   |  Posted: 2h, 12m ago  |  Ends: 6d, 21h  |   4 Proposals
Deliverable is a manufacturing-ready design for CNC machining. Design features include cost minimization, rugged environment , compact size, material tradeoffs. 4 week schedule needed. Pictures and a video conference description of an existing functional prototype is provided as a starting point. We are looking for you to take this prototype and use your design experience and creativity to propose a full housing configuration. The first payment milestone would be our approval of the first conceptual design Final milestone and deliverable would be a machining ready design that includes the Solidworks part files.
Category: Product Design       

L****man
 [?]
Sign in to view client's details.
| L****man
|    United States
Hourly Rate: Not Sure   |  Duration: 3-4 weeks  |  Posted: 2h, 57m ago  |  Ends: 14d, 21h  |   1 Proposal
Please read thoroughly before applying. I am looking firstly for a consultant/sourcing person. Hi there, I am currently looking to source/create my own vitamin brand, the brand would have capsules containing multiple different chemicals e.g. vitamin c + zinc. It is important that the manufacturer is able to combine multiple chemicals together into a single product. Perhaps the chemicals will come from another factory, and the packaging happening somewhere else - need bottles with labels as well as capsule/pill manufacturing. (This is the main part) I already have sources and contacts for some of the supplements and chemicals I am looking for. I am looking someone trustworthy specifically able to source these cheaply in China, or any other country that can provide quality for value such as the United States, New Zealand etc. What I am looking for is somebody who can communicate, preferably in Chinese with people in China, or is based in whatever country they are working in. I am l...
Category: Product Design       

C****ion
 [?]
Sign in to view client's details.
| C****ion
|    Hong Kong SAR, PRC
Fixed Price: $150 - $250   |  Posted: 4h, 9m ago  |  Ends: 14d, 19h  |   2 Proposals
I'm in need of an experienced Landscape Designer to a complete a set of landscape land which includes Lighting, Irrigation and drainage plans.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

t****079
 [?]
Sign in to view client's details.
| t****079
|    United States
Fixed Price: $500 - $1,000   |  Posted: 4h, 16m ago  |  Ends: 14d, 19h  |   1 Proposal
We need a manufacturer of mens underwear. We prefer that they be made from a 98% cotton and 2% spandex material. Expect 100-500 pieces total (4 different colors, sizes S-XXL). This job post covers the manufacture and delivery of 4 samples pcs only (2 briefs and 2 boxer briefs) and could be awarded to several manufacturers. Here's what is ultimately needed: On the front waistband, we need the logo embroidered in gold thread. We need logo tags with sizing on the back. Please respond with an approximate (non-binding) price for 100-500 pcs and a binding price for 4 sample pcs shipped to Pennsylvania. Don't hesitate to contact us with questions or details. Thank you for your consideration.
Category: Product Design       

S****uie
 [?]
Sign in to view client's details.
| S****uie
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 4h, 20m ago  |  Ends: 14d, 19h  |   1 Proposal
Need quote for a 14 gauge 316 L Stainless Steel ring. Usage 10,000 pcs, 1000 at a time or more. Price needs to be 0.50ó US or so. USA Mnfg is best but Offshore will be considered. See attached file
Category: Mechanical       

N****ore
 [?]
Sign in to view client's details.
| N****ore
|    United States
Fixed Price: Less than $500   |  Posted: 6h, 5m ago  |  Closed  |   14 Proposals
I need an engineering design fix for the leg design on a compact tripod. I need someone who can start on this job right away.
Category: Product Design       

t****ote
 [?]
Sign in to view client's details.
| t****ote
|    United States
Fixed Price: Not Sure   |  Posted: 6h, 41m ago  |  Ends: 14d, 17h  |   1 Proposal
I am planning to create several designs for women's apparel. They won't be extremely complex. I need a skilled seamstress to create what I design. The designs will be fun and should be enjoyable to create.
Category: Product Design       

g****ewn
 [?]
Sign in to view client's details.
| g****ewn
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: 6h, 43m ago  |  Ends: 14d, 17h  |   14 Proposals
We have a small product line and have simple CAD drawings for most of the products we carry online. We need a couple of CAD drawings completed and would like to work with someone in the United States, so we can easily ship product samples that needs to be used in the drawings. It's a small job initially, but we may want to redo some of our older drawings after the initial project. We will supply the actual product, as well as drawings of the other products to get a feel for what we're looking for.
Category: CAD       
Skills: AutoCAD, CAD/AutoCAD       
Preferred Location: United States

O****Hog
 [?]
Sign in to view client's details.
| O****Hog
|    United States
Fixed Price: Not Sure   |  Posted: 7h, 10m ago  |  Ends: 29d, 16h  |   1 Proposal
Bobst Manchester is a manufacturing company based in the UK who builds metalizing machines. Bobst Manchester pried themselves in being the premier supplier of vacuum coating and metalizing for barrier, decorative, security and high technology applications. We require the services of an agent to search for mechanical rollers and other parts in the Far East. Although we are currently dealing with suppliers in this area in order to maximise our benefits we require an agent with local knowledge. The agent must have a technical background. If you are interested please contact me
Category: Mechanical       
Preferred Location: China

B****ter
 [?]
Sign in to view client's details.
| B****ter
|    United Kingdom
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: 7h, 16m ago  |  Ends: 89d, 16h  |   5 Proposals
I am currently searching for estimators/Quantity Surveyors to help with take-offs/estimating of some luxury/high-end Residential projects. We are looking for experienced quantity surveyors and/or estimators who can perform take-offs based on PDF copies of the plans and specifications using computer based software and organize all data into spreadsheet matrix's based on specific cost codes/line item break-outs. We are only considering candidates who have and can demonstrate experience in performing quantity surveys on large scale luxury residential projects ranging from $10M -$20M(us). We are looking for full project take-offs, but will also consider breaking up the take-offs based on your specific expertise. Candidates who are interested in applying for these positions must provide their hourly rate, can provide samples of take-offs (both in spreadsheet form and visual highlighted plan take-offs from programs like- planswift, bluebeam, etake-offs, etc.). Candidates must also provi...
Category: Architecture       

E****anT
 [?]
Sign in to view client's details.
| E****anT
|    United States
Fixed Price: Not Sure   |  Posted: 8h, 10m ago  |  Ends: 14d, 15h  |   13 Proposals
we need new ideas for phone case designs must be able to use 3d cad software and creative we need motivated individuals who can work without supervision and creative persons we need phone covers for iphone 2,3,4,5 and samsung 2,3,4,5 htc one , and some other phones please send some ideas to be considered if we like the design we will ask you to draw full detail and create a template to send over to our factory in china some of our competitors has products listed at the bottom of the page   [obscured]  /Spigen%C2%AE-CUSHION-Samsung-Shimmery-Protective/dp/B00I3UWGJW/ref=pd_sim_cps_6?ie=UTF8&refRID=0SJB6XC4218GM8E4WC2R
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

s****vin
 [?]
Sign in to view client's details.
| s****vin
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 3-4 weeks  |  Posted: 8h, 44m ago  |  Ends: 14d, 15h  |   8 Proposals
The project is a devices stand for phones and tablets. It has some unique characteristics that need engineering.
Category: CAD       
Skills: SolidWorks, 3D Printing, 3D Design       
Preferred Location: United States

j****sey
 [?]
Sign in to view client's details.
| j****sey
|    United States
Fixed Price: Less than $500   |  Posted: 10h, 41m ago  |  Ends: 2d, 13h  |   17 Proposals
We need someone to do a small PCB layout for us. We supply schematics and all footprints. See the attached BOM for all the components that go on the board. There are a few connectors and some components that need a fixed position, we will place those on the PCB before sending it to you. Also we will specify the outline of the PCB which is roughly 100mm x 70mm, so there should be ample of space. If short on space we can increase the size if needed. The PCB is going to be 2 layers, with ground plane covering most of the back side. There are some DC/DC converters that need to be routed with lowest track impedance and 2 rf tracks that need matching. All files supplied/delivered are Protel 99 pcb/sch files. Please respond with a fixed price offer and some references/sample work done previously. This is estimated to take between 20 and 30 hours to route. We will supply the schematics next week and need the work done within 1 week of delivery of documents.
Category: Product Design       
Skills: PCB Design       
Preferred Location: India/Southern Asia

r****ger
 [?]
Sign in to view client's details.
| r****ger
|    Australia
Fixed Price: $20 - $70   |  Posted: 11h, 44m ago  |  Ends: 14d, 12h  |   0 Proposals
I need a suitable cladding material for an office building. It has to be transparent and opaque cladding. I need a suitable roofing such as green roof. Proposals are welcome. Kindly refer to the attached "Task 1" for more information. There has to be 3 drawings in total. Attached with is the ground floor plan, cross section and elevation for more reference. Price: $50 negotiable Scale: 1:20
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

I****_87
 [?]
Sign in to view client's details.
| I****_87
|    Singapore
Fixed Price: $5,000 - $10,000   |  Posted: 15h, 32m ago  |  Ends: 6d, 8h  |   0 Proposals
Controller requirements 1. Embedded control system without any OS. 2. All I/O s shall be optically isolated. 3. Controller can be divided in to functional PCBs like ÁController, Interface, Display etc. 4. Important PCBs shall be of 4 layers. ( EMI / EMC compliant ) 5. Minimum wiring to be used for interfaces within controller. 6. Power supply can be provided from outside through appropriate rating SMPS. 7. Display shall be TFT Graphic LCD with minimum resolution of 1024 X 768.(Minimum 7") 8. Key board of 32 keys in 8 X 4 matrix is to be used. 9. Provision of controller programing is to be made. 10. Screen layout as per our requirement. Controller functions 1. To capture 3 channel position feedbacks from linear scale / Encoder & show position of the axis on the screen. Z axis position needs to be compared with preset position. 2. To control & monitor 24 digital Inputs & 24 Digital outputs through I2C bus. 3. Depending on I/O status initiates functional actions / dis...
Category: Product Design       
Skills: Electrical Engineering, Embedded System       
Preferred Location: India

N****EMT
 [?]
Sign in to view client's details.
| N****EMT
|    India
Fixed Price: $100 - $300   |  Posted: 21h, 7m ago  |  Ends: 1d, 2h  |   17 Proposals
This is a re-post of a previous job. I've had few engineers try and come up with a solution for this design but none were able to follow all 3 requirements (listed below) so I'm going to try something different. I'm changing terms under which the job will be awarded. a. I will need to see your solution in proposal of this job as attachment (hand drawn sketch is ok). if design is good I award you a job and pay $100 immediately. b. after payment, a 3d model of your design must be delivered in STL format and i pay additional $200. You will have about 3 days to finish. Description from first post: I have a simple ring (see attached ring_design.jpg and specs.jpg) It's a piece of equipment that will be used to hang from so design must be very sturdy and strong. Main feature of the ring is ability to disassemble as you may have noticed by those swivel joints/connectors. If you look at gif animation you will see the concept of how the ring detaches. This is where the challenge is: designin...
Category: Mechanical       

k****bit
 [?]
Sign in to view client's details.
| k****bit
|    United States
Fixed Price: Not Sure   |  Posted: 22h, 26m ago  |  Closed  |   1 Proposal
Hi, i am an engineering student. I have some parts on CATIA which i want to import to ANSYS workbench and conduct thermal analysis in a particular way. This is urgent and I would need help at the earliest.
Category: CAD       
Skills: 3D Modeling, ANSYS, AutoCAD       

u****hwa
 [?]
Sign in to view client's details.
| u****hwa
|    United Kingdom
Fixed Price: Not Sure   |  Posted: 23h, 15m ago  |  Closed  |   9 Proposals
I need someone who can do take offs on blue prints for window film, for interior applications & bids. Please provide price per blue print and turn around time and some references to your accuracy
Category: Architecture       
Skills: 3D Modeling, Architecture       

C****000
 [?]
Sign in to view client's details.
| C****000
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 22, 2014  |  Ends: 13d, 23h  |   31 Proposals
Looking to develop a product so need CAD freelancer to help with drawings for manufacturing. Serious experienced drafters ONLY! Need immediate work done.
Category: Product Design       
Preferred Location: United States

a****702
 [?]
Sign in to view client's details.
| a****702
|    United States
Fixed Price: Not Sure   |  Posted: Apr 22, 2014  |  Ends: 13d, 23h  |   1 Proposal
Here is a brief description of what I am looking for. I'm not sure if someone has the capability to all of this or just the electrical. I want a device the size of a cell phone or bigger if needed (but thick enough to allow for 2 "double a" batteries and electronics). The outside will be made of plastic with 4 buttons on it. Button #1 will go through a list of titles. Buttons 2 and 3 allow user to move forward and backward through the list of items in the title. Button #4 will be a separate title list which will work as above. It will also have an "on" "off" button with a small green light to show when item is on which will turn red when battery is getting low. As each button is pressed, the device will read the item out loud in a human sounding voice, such as those used in a cars GPS. It will have a volume control also. There will be 2 holes to be able to hook up a headset and mic to hear items through a headset instead of a speaker. The device m...
Category: Product Design       

j****fii
 [?]
Sign in to view client's details.
| j****fii
|    United States
Fixed Price: Not Sure   |  Posted: Apr 22, 2014  |  Ends: 13d, 23h  |   17 Proposals
To create Millwork Shop drawings per AWS standards in a consistent, intuitive, creative, while activating prior knowledge of past jobs and past direction from our company. My intention is to find someone to bid our shop drawings or do them for the agreed price. Then break them down and delegate to the drafters of your choice that can perform and that you can communicate well with. Then you would assemble them and present them to us for a complete review. Then make the corrections and resubmitt to us until they meet our standards and needs. This is not for a one man shop or even a 5 man shop. Sometimes our needs exceed the standard drafting companies capabilities and that is where we run into trouble. We need someone that can be flexible, creative and capable of managing several elancers at once. We have 7 jobs that are in the drafting process right now and we are trying to get them done with in two weeks. We are tired of dealing with 4 different drafters and the communication prob...
Category: CAD       

C****INC
 [?]
Sign in to view client's details.
| C****INC
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job