Save this Search
     
Sort by:
  • Posted Date
Time Left: Less than 7 days
Fixed Price: Not Sure   |  Posted: 7h, 8m ago  |  Ends: 2d, 16h  |   1 Proposal
Arkansas Architect needed for preparing plans for building permits to rehab an apartment complex in Arkansas. We will provide survey plans, and we are not planning any major changes just rehab and updating. You ned to talk to building code to find out what is needed to bring the building up to code. Building was built in 1978. Only Architects licensed in Arkansas will be considered.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

p****ncc
 [?]
Sign in to view client's details.
| p****ncc
|    United States
Fixed Price: $40 - $100   |  Posted: 9h, 53m ago  |  Ends: 1d, 14h  |   5 Proposals
I have an existing apt (Lets call it "Current Job") (built approx 23 X 55), this apt can be extended with additional 10ft in the rear plus I have the air rights, and can extend/build up an additional 1740sf (one full floor including on top of 10ft extension + additional 245 ft). I have a drawn layout from another project ("Other Project") with approximate similar foot print, I would like to copy the layout idea from the Other Project to the Current Job on CAD, JUST TO GET THE IDEA WHAT CAN BE DONE. I understand that other project drawing layout cant exactly fit into Current Job, just want to copy the idea, of dining living room, Kitchen, etc, on 1st floor and 5 bedrooms on 2nd (If possible) elevator is not applicable on current job, as well as there only be one set of stairs going up to 2nd floor.
Category: CAD       
Preferred Location: United States

s****ben
 [?]
Sign in to view client's details.
| s****ben
|    United States
Fixed Price: $500 - $1,000   |  Posted: Aug 30, 2015  |  Ends: 1d, 21h  |   25 Proposals
To make edits and render three homes. Full AutoCad drawings will be provided for two of the homes, and a floorplan will be provided for the third home. The dropbox link below accesses the relevant files.   [obscured]  /sh/wgfry0xor8ig0yw/AADIaUhOSlWJNySph8HoBiOYa?dl=0 Please note the following: 1. Contractors (YOU) are able to use some initiative with the colors and other interior design elements and furniture used for the renderings. 2. The landscape used for the external renderings should be tropical. 3. Final files should be delivered a PDF files for all files (renderings and drawings, one image per page), as well as AutoCad (all drawings, elevations etc). 4. Full schedules for windows, doors, electrical and plumbing fixtures etc. for each home. PLEASE NOTE: In the "PHOENIX" folder: I have uploaded a new drawing called "New Phoenix Floor plan Drawing". This means that you will no longer need to make any changes to the design of the floorplan for...
Category: Architecture       
Skills: Architecture, AutoCAD       

C****jah
 [?]
Sign in to view client's details.
| C****jah
|    Antigua And Barbuda
Fixed Price: Not Sure   |  Posted: Aug 30, 2015  |  Ends: 15h, 24m  |   23 Proposals
We are looking for assistance in creating a design for a new watch case product . The case should have 3 main components inside of it: watch docking station, battery/charger cable area and a location for the watch itself. The docking station should be able to open and fold within the case itself. We have more details regarding this case for the Provider that gets awarded this job. We also have a case that we like that can serve as a basis for the design of our new case although our case has different look and functionality. We also have a rough schematic for this new case for the Provider to review.
Category: Product Design       

j****man
 [?]
Sign in to view client's details.
| j****man
|    United States
Fixed Price: $100 - $250   |  Posted: Aug 28, 2015  |  Ends: 3d, 13h  |   4 Proposals
Will email details. Basic as below ? X-Y table with 2 step motors, 100mm x 100mm, move 2mm/revolution ? Controlled by step controller: 200 steps/revolution ? PLC: Allen-Bradley Micrologic 1400, 1766-L32BXB ? Program software: RSLogix 500, use PTO Input & Output Objects Input from HMI: ? 3-Positions, (X,Y), limit 0.5-45mm (or 50 - 4500 steps) ? Buttons (5 on HMI): Position1 ? go to position (x1,y1) Position2 ? go to position (x2,y2) Position3 ? go to position (x3,y3) Stop - Home ? go to (0,0) Output on HMI: Display actual coordinate (x,y) Limit conditions: If x or y > 45 mm or <-45 mm, stop and send alarm; E-stop: stop X,Y and display actual coordinate (x,y) Target: Sample A-B PLC grogram (.RSS) for run. Requirement: have to use A-B RSLogix 500 software to make the sample program.
Category: Product Design       
Skills: PLC & SCADA, RSLogix 500       

y****000
 [?]
Sign in to view client's details.
| y****000
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 1-2 weeks  |  Posted: Aug 28, 2015  |  Ends: 5h, 1m  |   16 Proposals
This is an early stage development project of a 5 story wood frame 8 unit apartment building in Washington DC 1 block from the under development DC United Soccer Stadium. We are in the conceptual stage of determining what to build on the site and initial applications for approvals and variances/design review from various DC agencies etc. We anticipate 4-5 phases in this process and we are just completing the PreDevelopmentReviewMeeting process with the city, building, zoning, Public Works, Fire, etc. We have been using a local designer and they thankfully decided to terminate their involvement on Friday so we are needing to align ourselves with someone who can remotely help us develop the drawings etc. we need for the next three phases which are to apply for a parking variance, ask for approval from the neighborhood committee and have Design Review performed by the Zoning Commission for the Local Overlay District. We anticipate hiring some local architectural/engineering and land...
Category: Architecture       
Skills: 3D Modeling, AutoCAD, CAD/AutoCAD       

s****ada
 [?]
Sign in to view client's details.
| s****ada
|    United States
Fixed Price: Less than $500   |  Posted: Aug 24, 2015  |  Ends: 23h, 25m  |   8 Proposals
A set of architectural plans needs to be reviewed and California-Specific building code added, on the fly, so the set is ready for building permit filing with TOML. Do you have experience drafting Architectural Drawings in California, including Electrical and Plumbing? Do you know how to create California Building Code Compliant set of plans? For the job quality "benchmark" and reference what is acceptable, see "200 Lupin" Drawings below. Job scope: (1) (a) Review the sample set of previously approved drawings (200 Lupin Rd) by the same Town and be prepare to transfer (draw) observed details and produce that quality level. (b) Review the attached Town's Checklist relative to Architectural Drawings and complete the set in accordance with the requirements, which are mostly standard ones (2) You should add necessary comments on existing CAD drawings and make minor changes per my direction, on our set of Architectural pages, which is in 2...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       
Preferred Location: United States

O****aLA
 [?]
Sign in to view client's details.
| O****aLA
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Aug 23, 2015  |  Ends: 6d, 22h  |   21 Proposals
We are looking for talented architect with experience designing food markets, deli shops, pastry shops, to design our new store, which will be in USA. We are a wholesale greek natural food importer, opening our first retail store, which will be aa showcase of our products, including an extensive greek cheese, wine, and olive oil selection, as well as Greek pies, spreads, yogurt, etc. It is about 250 square meters, and will need thoughtful design including: ergonomics and layout of refrigeration, workspaces, sinks, etc. design of shelving, furniture color and lighting selection you will deliver 3d renderings during the design process to assist in the design process, and also floor plans, and construction plans. You must be able to work in both US Inches/feet, and also Metric system. The refrigeration equipment will be custom made to your specifications in greece, as will the woodwork/shelving. We prefer designers, architects in Greece, but are open to everyone. Must have a...
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

e****gin
 [?]
Sign in to view client's details.
| e****gin
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 23, 2015  |  Ends: 6d, 13h  |   40 Proposals
Hi were looking to create a new type of speaker with an amazing addition that would make the product great. We are a team that knows how to promote a product, and looking for someone who can make the prototype to send to china.
Category: Product Design       

Y****sin
 [?]
Sign in to view client's details.
| Y****sin
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 23, 2015  |  Ends: 6d, 3h  |   15 Proposals
Good Evening, I have a patent pending on a product that needs to be turned into a working prototype. The product is a fairly simple concept using a D battery for power source, a motion sensor (short range 180 degree spread x 14 inch range) operate a mini linear solenoid actuator or miniature push type plunger that would activate a pressure aerosol container. The elements will all need to be contained with-in a 1 3/4" x 2" x 15" plastic chaste. I see that you can produce drawings, will they be working drawings that can be sent to a manufacturer for pricing estimates (plastic mold). I have a contact that works with plastics in Philadelphia .. but have no source the other items needed except web based purchasing. In other words, how far can you take the product if we can agree on the design? Look forward to opening up a conversation if you are interested and able. Thank you in advance for your time. Jeff Tucker
Category: Product Design       

t****098
 [?]
Sign in to view client's details.
| t****098
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: Not Sure  |  Posted: Aug 21, 2015  |  Ends: 5d, 0h  |   38 Proposals
I'm looking for an innovative chair back and armrest design. I'm creating a unique chair product and I need a backrest that can be height adjusted about 14" (7" higher and 7" lower from starting location.) The chair back is connected to a frame that also supports 2 arm rests (one on each side, obviously). The armrests also need to be height adjustable, approximately the same range as the backrest (about 14") but they need to be adjustable independently of the backrest. This is the general requirement, but I will send the winning proposals my drawings and complete details of the existing product so far so you can see what the constraints are, etc. I don't want to divulge too much yet, but I will provide the successful candidate(s) with complete information and everything you need. The goal is to find an easy solution to this problem, and one that isn't complicated to manufacture.
Category: Product Design       

w****ger
 [?]
Sign in to view client's details.
| w****ger
|    United States
Fixed Price: Not Sure   |  Posted: Aug 21, 2015  |  Ends: 4d, 19h  |   22 Proposals
We're looking for someone that can come up with a stunning bottle design for our next fragrance launch. I've attached some examples of what we are looking for. We need ideas for unique bottle designs. This will involve researching the current marketplace for niche fragrances, and using your creative talent to come up with something spectacular! Must have experience in previous product designs, and open to creating different drafts. More information will be provided. Samples of actual products are attached below, we're looking for someone that can render new creative bottle designs, which will be sent to our product engineer.
Category: Product Design       

A****oup
 [?]
Sign in to view client's details.
| A****oup
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: 3-4 weeks  |  Posted: Aug 21, 2015  |  Ends: 4d, 14h  |   12 Proposals
Hello, I am trying to find a person to bring my product ideas to life and give them a real face and take them from sketches to a real look and design and then to real life. I have looked at other freelancers but no one works with soft goods (Materials) all just working with hard goods, electronics and solid designs. I saw your portfolio and was impressed and saw you back back designs so I figured Id reach out. I need a US base freelancer to make communication easier. I have three products I want to bring to life. I need a designer that can think outside the box, is creative and has the imagination to make this happen. Items: -Multi functioning sports towel/shell idea -caribiner key chain idea with multifuntioning hooks -folding top (similar to a jacket in shape) that can fold into itself
Category: Product Design       

W****MMA
 [?]
Sign in to view client's details.
| W****MMA
|    United States
Fixed Price: Not Sure   |  Posted: Aug 21, 2015  |  Ends: 4d, 13h  |   7 Proposals
I need help designing a product that will throw/lunch a football using compression and RFID to determine target. This support is just to build the blue print for the product and help identify the best method of achieving said goal. Below is the description of what the final product will do This device is a machine that replaces the need of having a quarterback or someone to throw a football during practice or fun. The machine throws footballs to its intended target based on RFID technology and selected patterns picked by the player. This machine give players the ability to play backyard football with as little as 2 players or can be used by a wide receiver to prefect his route running. Picture this: Four kids in backyard, One team with RED RFID wrist band that and the other team with Blue RFID wrist band. Each band is tractable by that the Elway. To start the game, each member of the red team selects a pre-programed route that he wants to run. Player 1 selects 10 yard post, Playe...
Category: Product Design       

j****kor
 [?]
Sign in to view client's details.
| j****kor
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 21, 2015  |  Ends: 4d, 13h  |   16 Proposals
Hi, we have 35 SPD files that we like to convert to DWG format. We need someone with SoftPlan version 14+ to do this for us.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD, SolidWorks       

s****har
 [?]
Sign in to view client's details.
| s****har
|    United States
Fixed Price: Not Sure   |  Posted: Aug 21, 2015  |  Ends: 4d, 5h  |   22 Proposals
We have drawing have to make changes done by city which is minor. We do have auto cad file Our architect on vacation it is not time to wait for his to return. Price must be reasonable. Building located in California
Category: Architecture       
Skills: Architecture, AutoCAD, Civil Engineering       

m****one
 [?]
Sign in to view client's details.
| m****one
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: Aug 21, 2015  |  Ends: 4d, 3h  |   10 Proposals
Conveyor Belt Scraper is very specialised product used on mine conveyor belt system. Please help us to find our potential buyers in Australia or your country.
Category: Product Design       
Skills: Engineering Design       

d****age
 [?]
Sign in to view client's details.
| d****age
|    Australia
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 20, 2015  |  Ends: 3d, 21h  |   5 Proposals
We have construction diagrams in SoftPlan (SPD) format. They are compliant to 2009 virginia code, but they need to be revised for 2012 virginia code. Changes are very minimal, but we need a designer who knows about construction diagrams and has SoftPlan software.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD, Construction       

s****har
 [?]
Sign in to view client's details.
| s****har
|    United States
Fixed Price: Not Sure   |  Posted: Aug 20, 2015  |  Ends: 3d, 21h  |   47 Proposals
Transpose 4 hand drawn floor plans to Autocad. Drawings must be professional quality. Finished product will be provided in Auto CAD DWG format as well as pdf. please provide lump sum pricing for first 4 drawings, and rates for additional drawings and changes to completed drawings. Building is cement floor, wooden stud metal clad construction. this project may be closed early as people bid
Category: CAD       

G****zel
 [?]
Sign in to view client's details.
| G****zel
|    Canada
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Aug 20, 2015  |  Ends: 3d, 20h  |   83 Proposals
Hi all, we are a 3D printer company and we want to include 20 everyday items in our software for customers so that when they receive our machine, they can start printing things right out of the box-instead of having to go find things to print or design their own items to print. We need someone to design 20 different items. You will need to understand the context of 3D printing and I will help explain the way these products need to be created in order for the most success. Here is the list of items (we have more as well): 20 things that people would want the designs for (on our data base) 1) Money Clip 2) Organizers -Infinite stackable containers -Busines card holder/pencil or pen holder 3) Universal car mount for phone 4) Universal bike mount 5) Hair comb 6) Dog tags 7) Sunglasses 8) Shower head 9) Laptop Stand 10) Jewelry organizer (jewelry tree) 11) Wall hook 12) Toothbrush Holder 13) Angled wine bottle holder 14) Picture frame 15) Bow Tie THIS IS A LONG TERM PROJECT THAT WILL EXT...
Category: CAD       

m****don
 [?]
Sign in to view client's details.
| m****don
|    United States
Fixed Price: Not Sure   |  Posted: Aug 20, 2015  |  Ends: 3d, 19h  |   18 Proposals
I need help making a prototype of a clip that I already have designed. I will then take this prototype to manufactures for producing.
Category: Product Design       

b****rrb
 [?]
Sign in to view client's details.
| b****rrb
|    United States
Fixed Price: Less than $500   |  Posted: Aug 20, 2015  |  Ends: 3d, 17h  |   2 Proposals
I need some adhesive stickers made in some dimensions and in certain material and would like it done and sent within 2 days
Category: Product Design       

S****abs
 [?]
Sign in to view client's details.
| S****abs
|    Belgium
Fixed Price: Not Sure   |  Posted: Aug 20, 2015  |  Ends: 3d, 17h  |   11 Proposals
Dear all, I need some help in translating the drawing models (*.dxf) from curves into surfaces in AutoCAD. Please check the attached powerpoint, the main target is to create a guiding procedure in AutoCAD to extract and repair curves (if necessary), then generate a corresponding surface based on input parameters such diameter and angle, and finally export the results to CATIA. Of course, user interfaces are nice to have. But, this don't need to be perfect, I just need a simple prototype at this stage. If this goes well, then more could be just continued. Please kindly let me know if any information you may want to know. Thanks.
Category: CAD       
Skills: 3D Modeling, AutoCAD       

S****OHO
 [?]
Sign in to view client's details.
| S****OHO
|    Taiwan
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job