Save this Search
     
Sort by:
  • Posted Date
Civil & Structural
Fixed Price: Not Sure   |  Posted: 5h, 9m ago  |  Ends: 14d, 18h  |   5 Proposals
I have a log cabin I need some one to design IBC 1603 for it I need structural load and wind capacity for this cabin to be implemented. more details will be provided later. it's important that you have worked with IBC 1603 and you have knowledge about US structure Thanks
Category: Civil & Structural       

N****vin
 [?]
Sign in to view client's details.
| N****vin
|    United Kingdom
Fixed Price: $500 - $1,000   |  Posted: 7h, 41m ago  |  Ends: 14d, 16h  |   4 Proposals
Repost under company account of previous job posting: Hello, I need someone to some modifications to A20-Olinuxino-Lime-2-4G pcb from olimex. Board can be found at:   [obscured]  /Products/OLinuXino/A20/A20-OLinuXIno-LIME2-4GB/open-source-hardware And board files and schematic can be found at   [obscured]  /OLIMEX/OLINUXINO/tree/master/HARDWARE/A20-OLinuXino-LIME2 Basically I need the board profile made slightly larger so that all required connectors are on one side. Removal of battery port, UEXT, SATA, and GPIO headers. Addition of a few leds, and a fixed rs232 port with a certain configuration, and ideally getting a real time clock in there would be nice with battery backup. I also require the final files to be in gerber format for production with board house.
Category: Product Design       
Skills: PCB Design, Eagle       

a****8ca
 [?]
Sign in to view client's details.
| a****8ca
|    Canada
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 14h, 10m ago  |  Ends: 14d, 9h  |   11 Proposals
We need a candidate with the ability to create estimates for construction bid proposals. This bid is for a construction project located within the United States that involves shoring a bridge. Please view page 6 of the Bridge Project (attached) to view the items we need estimated. The drawings for the project are available.
Category: Civil & Structural       
Skills: Architecture, AutoCAD, Civil Engineering       

e****tor
 [?]
Sign in to view client's details.
| e****tor
Fixed Price: Less than $500   |  Posted: 15h, 32m ago  |  Ends: 14d, 8h  |   7 Proposals
Design/engineering assistance is needed for a simple system including dual/parallel small linear track with a spanning (between the two tracks) rotating arm design. The ideal freelancer will be able to 1) provide at least 2 alternate manufacture/ assembly-friendly designs to accomplish the product concept in an 2) provide source information for inexpensive off-shelf parts (for somebody in the US to source) for most or all of the required components and 3) CAD images of the different components. At least one design should be simple and mechanical in function without the requirement of MEM systems. Priority should be given to an inexpensive, easy to produce and part-source design. The linear motion should take <2 seconds to advance and return to starting position and the arm rotation will be of a slow rotation. Neither will require substantial force. The arm should complete it's full rotation before at the very beginning portion of the linear movement. The system needs to ...
Category: Product Design       

M****RnD
 [?]
Sign in to view client's details.
| M****RnD
|    United States
Fixed Price: Not Sure   |  Posted: 15h, 33m ago  |  Ends: 6d, 8h  |   34 Proposals
Hi, I'm looking for 3D models that I can use to build a prototype. There will be about 4 pieces for the first concept I believe (I included a rough mockup, and put an 'x' on the parts I'm not interested in at this time). Its actually for a 'smart' product in the end, but this phase 1 concept will not include the electronics, just the housing. Once I get that right, I'll move into working with the electronics. Also, if it matters, product weight is not an issue. If anything I'd prefer it to be heavier than lighter. I'm looking for someone who has lots of experience in 3D modeling, specifically for parts being 3d printed, but would prefer someone who also understand materials as well as means & methods for production. Please be as descriptive as you can in your proposal, as I have never done anything like this before.
Category: Product Design       

M****ing
 [?]
Sign in to view client's details.
| M****ing
|    United States
Hourly Rate: $40 - $50 / hr   |  Duration: 1-2 weeks  |  Posted: 15h, 40m ago  |  Ends: 14d, 8h  |   0 Proposals
In this job we will need a continuous voice recognition that updates a listbox after every sentence spoken and uses Nuance . We do not believe this will take very long to do and need this done ASAP.
Category: Product Design       
Skills: Software Engineering       

m****vvy
 [?]
Sign in to view client's details.
| m****vvy
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 16h, 2m ago  |  Ends: 14d, 7h  |   10 Proposals
Need help preparing drawings for UL listing submittal. We have a dispensing system that is used to dispenser propane into vehicles that run on propane. We need assistance finishing the drawings for our UL submittal. Solidworks experience preferred.
Category: CAD       

j****ick
 [?]
Sign in to view client's details.
| j****ick
|    United States
Hourly Rate: $10 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: 16h, 2m ago  |  Ends: 14d, 7h  |   11 Proposals
I need an engineer familiar with plastics to advise me on which material; plastic, polypropylene, or alternative will yield the qualities I need in terms of flexibility/rigidity for my product. I have CAD drawings, 3D Printed prototypes, and detailed docs explaining the product needs. I may need a slight redesign based on the material chosen, but need to be advised on what change would be relevant in order to keep the functionality and aesthetics of the product. The design needs to be able to be manufactured using bulk manufacturing techniques. I have more attachments and detailed docs than the one attached here, but would like to get in touch with someone prior to providing all intellectual property.
Category: Product Design       

a****kle
 [?]
Sign in to view client's details.
| a****kle
|    United States
Fixed Price: $20 - $20,000   |  Posted: 18h, 36m ago  |  Ends: 14d, 5h  |   3 Proposals
In the specs for one of the jobs we're quoting, part of the requirement is "Shop Drawings and Calculation shall be signed and stamped by a Professional Engineer licensed in the State of California". We need a CA-licensed engineer to define the scope of what we need to provide to them for this project, and quote a price for delivery. To an interested CA PE I can provide further documentation, including Structural Calculations signed and stamped by a CA PE early in the 2000's.
Category: Civil & Structural       
Preferred Location: North America

u****mex
 [?]
Sign in to view client's details.
| u****mex
|    United States
Fixed Price: Less than $500   |  Posted: 20h, 1m ago  |  Ends: 14d, 3h  |   16 Proposals
I need a simple drawing of a product similar to a toothpaste cap. I may also want a short video to demonstrate taking the cap on and off an item.
Category: Product Design       

c****new
 [?]
Sign in to view client's details.
| c****new
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 21h, 55m ago  |  Ends: 14d, 2h  |   2 Proposals
I am looking to find someone with extensive knowledge of chemicals to create an oral care product with SPECIFIC characteristics. Formula needs to take into account toxicity of ingredients, ability and cost to purchase ingredients smell taste and stability.
Category: Product Design       

O****Lah
 [?]
Sign in to view client's details.
| O****Lah
|    United States
Fixed Price: Not Sure   |  Posted: Apr 24, 2015  |  Ends: 28d, 23h  |   2 Proposals
We required Hardware and software Engineers for our New Project on contract . Skills Required : Hardware Engineer (Exp.>=5 Yrs): Expertise in Circuit design,Component selection,Working experience in wireless technologies-Bluetooth,Wifi,zigbee. Software Engineer (Exp.>=5 Yrs) : Expertise in Embedded software development. Working Experience in Programming of Wireless technologies- Bluetooth, WiFi, Zigbee. Note : Time and accuracy in work will be highly expected.
Category: Product Design       
Preferred Location: India

s****ics
 [?]
Sign in to view client's details.
| s****ics
|    India
Fixed Price: Not Sure   |  Posted: Apr 24, 2015  |  Ends: 13d, 22h  |   16 Proposals
We are a Danish engineering company with an office in Sarajevo looking for new employees to grow our office there. Currently we are looking for a design engineer for our team in Sarajevo and viewed your profile where we believe that you could be a suitable candidate. You are also welcome to simply send this here. If you do not have a CV some short info about your experience would also be sufficient. Please include your contact info so that we can get in touch with you. You can see more information about our company We offer a position with various opportunities and a good salary + benefits. We look forward to hearing from you. Kind regards Beway Bakir
Category: Civil & Structural       
Skills: AutoCAD, Civil Engineering, Web Design       

B****way
 [?]
Sign in to view client's details.
| B****way
|    Denmark
Fixed Price: Not Sure   |  Posted: Apr 24, 2015  |  Ends: 13d, 22h  |   5 Proposals
We are a Danish engineering company with an office in Sarajevo looking for new employees to grow our office there. Currently we are looking for a design engineer for our team in Sarajevo and viewed your profile where we believe that you could be a suitable candidate. If you are interested, could you please forward your CV You are also welcome to simply send this here. If you do not have a CV some short info about your experience would also be sufficient. Please include your contact info so that we can get in touch with you. You can see more information about our company . We offer a position with various opportunities and a good salary + benefits. We look forward to hearing from you. Kind regards Beway Bakir
Category: Civil & Structural       
Skills: AutoCAD, Civil Engineering, Web Design       

B****way
 [?]
Sign in to view client's details.
| B****way
|    Denmark
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 24, 2015  |  Ends: 13d, 19h  |   1 Proposal
We are looking for content providers and their quotation for the following urgent requirement : Task: starmass manual of practice for industrial audits, plant audit manuals (India focused) The company the content required from providers is starmass Environmental technologies -canada , which operates in North-America, Middle East and India vastly with engineering, structural, health monitoring and all civionics too.we are looking to standardize technical , non-technical stuff for all the parts of the globe they operate. We can discuss further and have a better understanding. Thank you
Category: Civil & Structural       

r****ra9
 [?]
Sign in to view client's details.
| r****ra9
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 24, 2015  |  Ends: 13d, 18h  |   8 Proposals
Require engineers to design steel work to hold up two 12 x 3 portable buildings which will bolt together. Then out the front will be a veranda overlooking the pretty view. The work is required to meet Australian Standards. We also have other work available outside of this project.
Category: Civil & Structural       

R****tag
 [?]
Sign in to view client's details.
| R****tag
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 23, 2015  |  Ends: 13d, 14h  |   37 Proposals
Searching for 3D designer to help create CAD file for printing of 3D prototype. Needs to take rought sketch and create a 3D CAD file to print protoype.
Category: CAD       
Skills: 3D Modeling, 3D Printing, 3D Design       

l****pee
 [?]
Sign in to view client's details.
| l****pee
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 13d, 13h  |   8 Proposals
Hi everyone- I require assistance with MEP design and drafting on a 60,000 sf commercial project. Project is past the concept phase and ready for hard design. Looking for a designer/drafter who has experience with mechanical, electrical and/or plumbing (any one of those or all three, preferably all three). I will provide additional information on the project and make sure that you understand the scope prior to any agreement. US or Canada ONLY. Please type "MEP" at the start of your proposal so I know that you read this. Thanks!
Category: CAD       
Preferred Location: North America

b****215
 [?]
Sign in to view client's details.
| b****215
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 13d, 11h  |   21 Proposals
This bracket is for a wall mounted loudspeaker bracket. We have DWG's of the bracket's component parts but these need to be assembled into a finished 2D bracket drawing with dimensions and multiple views, top, side & front. The finished drawing should use our standard title block as seen in the component drawings.
Category: CAD       
Skills: 3D Modeling, AutoCAD       

r****rby
 [?]
Sign in to view client's details.
| r****rby
|    United States
Fixed Price: Less than $500   |  Posted: Apr 23, 2015  |  Ends: 5d, 10h  |   28 Proposals
We have a basic design of a machine but would like to have some minor design changes made to make it look more modern. Looking for 3-4 different cosmetic designs. I would like to see something quickly for a design review.
Category: Product Design       

I****PRP
 [?]
Sign in to view client's details.
| I****PRP
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 13d, 9h  |   6 Proposals
Development of a wireless hub that connects Bluetooth devices to the 3G cellular network. Device will be a wall plug-in device to operate off of 120VAC US wall outlets. The device will need to support HTTPS connections back to a central server. No user interface development is required. Full service development is required to get a product designed, prototyped and to pass certification testing and carrier acceptance testing for AT&T.
Category: Product Design       
Skills: Manufacturing Design, Electronics       

R****ogy
 [?]
Sign in to view client's details.
| R****ogy
|    United States
Fixed Price: Less than $500   |  Posted: Apr 23, 2015  |  Ends: 28d, 7h  |   1 Proposal
I am the proprietor of a unique sports specific shirt who originally found a terrific designer on Elance to help develop, design, and provide the tech pack and pattern for me. After several non-successful attempts trying to find someone who can help with this process of making a marker to use for sample production; I'm back on Elance!! I hope someone can help me out! Thanks, Dave
Category: Product Design       
Preferred Location: United States

d****d31
 [?]
Sign in to view client's details.
| d****d31
|    United States
Fixed Price: $80 or less   |  Posted: Apr 23, 2015  |  Ends: 13d, 6h  |   33 Proposals
I require an architect to draw a house plan to scale. It will be a bungalow with a bedroom and office upstairs. I can provide all measurements and an amateur drawing of the ground floor. Front, side and room elevations required.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

J****agh
 [?]
Sign in to view client's details.
| J****agh
|    Ireland
Fixed Price: Not Sure   |  Posted: Apr 23, 2015  |  Ends: 13d, 6h  |   5 Proposals
I need someone to make a car in catia v5 imagine and shape following some instructions (dimensions). The freelancer will have to provide me the result as a surface and solid. Moreover I want you to record the entire process and provide me the video. I need a quick turnaround, no more that 3 days. P.S: I need you to work within this module so that the car can be easily modify.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, catia v5       

p****785
 [?]
Sign in to view client's details.
| p****785
|    United Kingdom
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job