Save this Search
     
Sort by:
  • Posted Date
Fixed Price: $500 - $1,000   |  Posted: 1h, 13m ago  |  Ends: 14d, 22h  |   1 Proposal
Repost under company account of previous job posting: Hello, I need someone to some modifications to A20-Olinuxino-Lime-2-4G pcb from olimex. Board can be found at:   [obscured]  /Products/OLinuXino/A20/A20-OLinuXIno-LIME2-4GB/open-source-hardware And board files and schematic can be found at   [obscured]  /OLIMEX/OLINUXINO/tree/master/HARDWARE/A20-OLinuXino-LIME2 Basically I need the board profile made slightly larger so that all required connectors are on one side. Removal of battery port, UEXT, SATA, and GPIO headers. Addition of a few leds, and a fixed rs232 port with a certain configuration, and ideally getting a real time clock in there would be nice with battery backup. I also require the final files to be in gerber format for production with board house.
Category: Product Design       
Skills: PCB Design, Eagle       

a****8ca
 [?]
Sign in to view client's details.
| a****8ca
|    Canada
Fixed Price: Not Sure   |  Posted: 4h, 14m ago  |  Ends: 14d, 19h  |   3 Proposals
I need to build additional rooms in my house. Currently it has only the following: - 1 living room, dining room and kitchen - 1 bathroom - 1 bedroom I am going to build the following additional rooms: - 1 bedroom - 1 garage for 1 car next to a covered patio. It will be also used as a casual dining room when I receive a lot of guests: it must be about 3.5 meters x 6 meters. - Working room: I work from home with my computer and I need a separate room. In the pdf attached, you can see the actual floor plan. After a bid is chosen, I will submit a DWG file with the current floorplan. Your task will be to submit sketches (proposals) of the additions and I will choose the one I like most. I already have a design in mind, but I would like to see your ideas. After one sketch is chosen, you will have to submit Autocad DWG files with the final floor plan, and PDF exports of the files. Since the house is located in Argentina, your house plan doesn't need to comply with all local building co...
Category: Architecture       
Skills: Architecture, AutoCAD, Interior Design       

z****ica
 [?]
Sign in to view client's details.
| z****ica
|    Argentina
Hourly Rate: Not Sure   |  Duration: 1-2 weeks  |  Posted: 7h, 41m ago  |  Ends: 14d, 16h  |   9 Proposals
We need a candidate with the ability to create estimates for construction bid proposals. This bid is for a construction project located within the United States that involves shoring a bridge. Please view page 6 of the Bridge Project (attached) to view the items we need estimated. The drawings for the project are available.
Category: Civil & Structural       
Skills: Architecture, AutoCAD, Civil Engineering       

e****tor
 [?]
Sign in to view client's details.
| e****tor
Fixed Price: Less than $500   |  Posted: 7h, 44m ago  |  Ends: 14d, 16h  |   14 Proposals
Looking for a good architectural designer to create: - Site Plan - Floor plan - Elevations - Basic Landscaping Plan - Basic Sketchup 3D model Home will be a 2 story modern style. Approx. 4000 sqft, 4 Bedroom (3 Bedroom+Bonus Room or Office) 4.5 bathrooms. Pool, Lounge and Boat Dock. 2 Car Garage, Solar Panels on Roof. Design should be energy efficient and keep outdoor spaces cool by generally taking into account wind (North East) and daytime Sun (South) for the location (Caribbean). I will provide sample images of designs to be followed so you won't have to design the home from scratch. I have many images that will convey the design intent. This is just a CONCEPT house, no other architectural or construction documents needs to be created. Best value for money bidder will win. Thanks, James
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD, SketchUp, Sketch       

w****erj
 [?]
Sign in to view client's details.
| w****erj
|    Cayman Islands
Fixed Price: Not Sure   |  Posted: 9h, 5m ago  |  Ends: 6d, 14h  |   21 Proposals
Hi, I'm looking for 3D models that I can use to build a prototype. There will be about 4 pieces for the first concept I believe (I included a rough mockup, and put an 'x' on the parts I'm not interested in at this time). Its actually for a 'smart' product in the end, but this phase 1 concept will not include the electronics, just the housing. Once I get that right, I'll move into working with the electronics. Also, if it matters, product weight is not an issue. If anything I'd prefer it to be heavier than lighter. I'm looking for someone who has lots of experience in 3D modeling, specifically for parts being 3d printed, but would prefer someone who also understand materials as well as means & methods for production. Please be as descriptive as you can in your proposal, as I have never done anything like this before.
Category: Product Design       

M****ing
 [?]
Sign in to view client's details.
| M****ing
|    United States
Fixed Price: Less than $500   |  Posted: 9h, 37m ago  |  Ends: 14d, 14h  |   8 Proposals
I looking for someone to put together a 3D drawing for new entertainment facility/family fun center and office space quickly. This will be a simple 3D concept for presentation purposes. Looking for someone who is fast, creative, and able to communicate well over video chat. Google Sketch up or any 3D platform that is easy to show people would be great online easily. Want to get started right away.
Category: Architecture       
Skills: 3D Modeling, Architecture, AutoCAD       

a****her
 [?]
Sign in to view client's details.
| a****her
|    United States
Fixed Price: $20 - $20,000   |  Posted: 12h, 7m ago  |  Ends: 14d, 11h  |   3 Proposals
In the specs for one of the jobs we're quoting, part of the requirement is "Shop Drawings and Calculation shall be signed and stamped by a Professional Engineer licensed in the State of California". We need a CA-licensed engineer to define the scope of what we need to provide to them for this project, and quote a price for delivery. To an interested CA PE I can provide further documentation, including Structural Calculations signed and stamped by a CA PE early in the 2000's.
Category: Civil & Structural       
Preferred Location: North America

u****mex
 [?]
Sign in to view client's details.
| u****mex
|    United States
Fixed Price: $1,000 - $5,000   |  Posted: 15h, 26m ago  |  Ends: 14d, 8h  |   2 Proposals
I am looking to find someone with extensive knowledge of chemicals to create an oral care product with SPECIFIC characteristics. Formula needs to take into account toxicity of ingredients, ability and cost to purchase ingredients smell taste and stability.
Category: Product Design       

O****Lah
 [?]
Sign in to view client's details.
| O****Lah
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: 22h, 40m ago  |  Ends: 14d, 1h  |   8 Proposals
Require engineers to design steel work to hold up two 12 x 3 portable buildings which will bolt together. Then out the front will be a veranda overlooking the pretty view. The work is required to meet Australian Standards. We also have other work available outside of this project.
Category: Civil & Structural       

R****tag
 [?]
Sign in to view client's details.
| R****tag
|    Australia
Hourly Rate: $20 - $30 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 23, 2015  |  Ends: 13d, 20h  |   33 Proposals
Searching for 3D designer to help create CAD file for printing of 3D prototype. Needs to take rought sketch and create a 3D CAD file to print protoype.
Category: CAD       
Skills: 3D Modeling, 3D Printing, 3D Design       

l****pee
 [?]
Sign in to view client's details.
| l****pee
|    United States
Fixed Price: Less than $500   |  Posted: Apr 23, 2015  |  Ends: 5d, 17h  |   27 Proposals
We have a basic design of a machine but would like to have some minor design changes made to make it look more modern. Looking for 3-4 different cosmetic designs. I would like to see something quickly for a design review.
Category: Product Design       

I****PRP
 [?]
Sign in to view client's details.
| I****PRP
|    United States
Fixed Price: Less than $500   |  Posted: Apr 23, 2015  |  Ends: 28d, 14h  |   1 Proposal
I am the proprietor of a unique sports specific shirt who originally found a terrific designer on Elance to help develop, design, and provide the tech pack and pattern for me. After several non-successful attempts trying to find someone who can help with this process of making a marker to use for sample production; I'm back on Elance!! I hope someone can help me out! Thanks, Dave
Category: Product Design       
Preferred Location: United States

d****d31
 [?]
Sign in to view client's details.
| d****d31
|    United States
Fixed Price: $80 or less   |  Posted: Apr 23, 2015  |  Ends: 13d, 12h  |   32 Proposals
I require an architect to draw a house plan to scale. It will be a bungalow with a bedroom and office upstairs. I can provide all measurements and an amateur drawing of the ground floor. Front, side and room elevations required.
Category: CAD       
Skills: 3D Modeling, Architecture, AutoCAD       

J****agh
 [?]
Sign in to view client's details.
| J****agh
|    Ireland
Fixed Price: Not Sure   |  Posted: Apr 23, 2015  |  Ends: 13d, 12h  |   5 Proposals
I need someone to make a car in catia v5 imagine and shape following some instructions (dimensions). The freelancer will have to provide me the result as a surface and solid. Moreover I want you to record the entire process and provide me the video. I need a quick turnaround, no more that 3 days. P.S: I need you to work within this module so that the car can be easily modify.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks, catia v5       

p****785
 [?]
Sign in to view client's details.
| p****785
|    United Kingdom
Fixed Price: Less than $500   |  Posted: Apr 23, 2015  |  Ends: 13d, 4h  |   10 Proposals
We have en existing design / PCB which currently uses a ceramic chip antenna and Telit GE865 GSM module. We wish to replace the antenna with a PCB trace design, to be used with a revised PCB using SIMCOM SIM800H GSM/BLUETOOTH module. We require a trace antenna to support 4 GSM bands (850/900/1800/1900) and Bluetooth classic bands. The PCB layout will be revised but the overall shape and size cannot be changed Please see the attachment: AT200 design is an existing product / design that we have with PCB trace, for guidance, we will be looking for a similar design AT210 design shows the existing PCB with ceramic antenna, to be replaced with a similar design to the AT200, but adapted to suit the available space. We use ALTIUM Designer Summer 08. The design file will need to be compatible with that CAD package, ideally in a single polygon section. Alternatively we can accept a design with detailed dimensions and create our own polygon. This job is urgent. Ideally we are looki...
Category: CAD       
Skills: 3D Modeling, Altium Designer, AutoCAD       

p****lla
 [?]
Sign in to view client's details.
| p****lla
|    United Kingdom
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 28d, 3h  |   7 Proposals
We provide Construction Measurement services to main contractors in the UK construction industry currently outsource over 20 000 hours of work a year. We are looking for both individuals and consultants who we can work with and train to assist us in this work. New projects will be starting in the next few weeks. The attached bid documentation sets out our requirements and the application forms that will require completion. When bidding, please note that we: ? provide and fund the training ? provide all the specialist software ? are looking to develop long term relationships and provide ongoing work ? require candidates with excellent written and oral English language skills ? cannot consider quotes that do not include an indicative hourly rate ? Candidates should be studying at or have achieved first class degree level skills Candidates should read the attached document before submitting a quotation. We are especially interested to hear from candidates with knowledge of a speci...
Category: Civil & Structural       
Skills: 3D, Civil Engineering, English, Construction       
Preferred Location: Eastern Europe

T****ANE
 [?]
Sign in to view client's details.
| T****ANE
|    United Kingdom
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 28d, 3h  |   6 Proposals
We provide CAD/ building measurement services to main contractors in the UK construction industry and we are looking for both individuals and companies who we will train to assist us in this work. Projects will start in the next few weeks. The attached bid documentation sets out our requirements and the application forms that will require completion. When bidding, please note: ? We provide and fund the training ? We provide all the specialist software ? We require candidates with excellent written and oral English language skills ? We are looking to develop long term relationships and provide ongoing work ? We currently outsource over 25,000 hours of work a year ? Candidates should be studying at or have achieved first class degree level skills ? We cannot consider quotes that don't include an indicative hourly rate Candidates should read the attached document before submitting a quotation. We are especially interested to hear from self employed candidates with knowledge of a ...
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering       
Preferred Location: Eastern Europe

T****ANE
 [?]
Sign in to view client's details.
| T****ANE
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 23, 2015  |  Ends: 28d, 3h  |   0 Proposals
We provide Construction Measurement services to main contractors in the UK construction industry currently outsource over 20 000 hours of work a year. We are looking for both individuals and consultants who we can work with and train to assist us in this work. New projects will be starting in the next few weeks. The attached bid documentation sets out our requirements and the application forms that will require completion. When bidding, please note that we: ? provide and fund the training ? provide all the specialist software ? are looking to develop long term relationships and provide ongoing work ? require candidates with excellent written and oral English language skills ? cannot consider quotes that do not include an indicative hourly rate ? Candidates should be studying at or have achieved first class degree level skills Candidates should read the attached document before submitting a quotation. We are especially interested to hear from self employed candidates with knowle...
Category: Civil & Structural       
Skills: 3D Modeling, AutoCAD, Civil Engineering       
Preferred Location: Eastern Europe

T****ANE
 [?]
Sign in to view client's details.
| T****ANE
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 22, 2015  |  Ends: 12d, 18h  |   18 Proposals
PROVIDE A TECHNICAL DRAWING OF MITTEN CLIPS UNDER THE DIRECTION OF JOE GALLEGOS THANK YOU FOR YOUR WORK
Category: CAD       
Skills: 3D Modeling, AutoCAD       

P****CMT
 [?]
Sign in to view client's details.
| P****CMT
|    United States
Fixed Price: Less than $500   |  Posted: Apr 22, 2015  |  Ends: 12d, 18h  |   16 Proposals
We require ongoing work for a Revit Draftsperson. As a bathroom renovator based in Australia, we do 5 projects per week and require the building drawings drawn and annotated to a high standard of detail. we are willing to work with you to bring the drawings to the specifications we require. Turnaround would need to be 24 hours for markups. Fee will be on a per project basis.
Category: CAD       
Skills: AutoCAD, Autodesk, Autodesk Architecture       

s****oms
 [?]
Sign in to view client's details.
| s****oms
|    Australia
Fixed Price: Less than $500   |  Posted: Apr 22, 2015  |  Ends: 12d, 16h  |   41 Proposals
I need a quick turn around on this one. I need some elements of the "Site" drawing added to the "wetland" drawing. Specifically I need the footprint of the house and driveway added to the site plan with the wetland "vegetated Corridor" on it. If you are able to open the attached files it should all be pretty clear. Additionally I would like to make some minor changes to the site plan that can be seen in the attached JPEG file.
Category: CAD       
Skills: AutoCAD       

P****reg
 [?]
Sign in to view client's details.
| P****reg
|    United States
Fixed Price: $20 - $100   |  Posted: Apr 22, 2015  |  Ends: 12d, 12h  |   40 Proposals
We need the attached drawings done in autocad. We will provide our cad detail standards and border sheet for your use.All cad drawings must be done based on our standards and on our title block. We do not have the attached drawings in cad - You will need to redraw them and then make some minor revisions we will mark up for you. Please note that you must provide a fixed price to be considered. You price must reflect what you are willing to charge to complete the entire scope of work. within the time frame. You must use Autocad. Do not bid if you cant do the work in the time frame you mention. We have worked on elance for many many projects. We are always fair and reasonable and appreciate the many fine people we have worked with over the years. When you are working and send drawings we need pdf and autocad.
Category: Architecture       
Skills: Architecture, AutoCAD       

s****ner
 [?]
Sign in to view client's details.
| s****ner
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job