Save this Search
     
Sort by:
  • Posted Date
Fixed Price: Not Sure   |  Posted: Apr 19, 2014  |  Ends: 10d, 23h  |   3 Proposals
Hi, I am looking for an engineer who has experience designing handheld laser pointers. What I am looking for is the slimmest laser pointer design available. I need to know the individual component dimensions so I can develop a custom housing. If you this information please reply. If it is something you can share that would be great if not we can work out a deal for me to buy the drawings, model, etc. Thank you Cameron
Category: Product Design       
Skills: Manufacturing Design       

c****age
 [?]
Sign in to view client's details.
| c****age
|    United States
Fixed Price: Not Sure   |  Posted: Apr 19, 2014  |  Ends: 10d, 22h  |   2 Proposals
We require a unit to measure the distance between two points and relay the data back to a display showing the distance between the two sensors. On fishing boats, when the net is released into the water the net opens and allows the fish to be caught. The width at which the net is open is critical. We need to design a low cost solution to to measure this data and relay it to the boat. The units need to be battery powered and last about a week under full charge. I have attached a picture of a net and the spread on it. There is units already available, but they are extermely expensive.
Category: Product Design       

t****sky
 [?]
Sign in to view client's details.
| t****sky
|    Ireland
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Apr 19, 2014  |  Ends: 10d, 21h  |   4 Proposals
Drafters on the East Coast and Mid-west are welcome to apply. Time Zone is important to me so I can contact you while I'm at work. I'm in New York. 1. 20 l.f. plastic laminate upper Corridor 102 cabinets (3/A700). 2. 14 l.f. plastic laminate lower Corridor 102 cabinets (3/A700). 3. 24 l.f. plastic laminate upper & lower Classroom cabinets with full height backsplash & pullout garbage (4/A700). Hardware, glass and glazing by others. Protection of millwork after installation, not in contract. Bathrooms not in contract.
Category: CAD       
Skills: 3D Modeling, AutoCAD       
Preferred Location: North America

m****io1
 [?]
Sign in to view client's details.
| m****io1
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: Not Sure  |  Posted: Apr 19, 2014  |  Ends: 10d, 21h  |   3 Proposals
Only drafters in the Midwest or East Coast may apply. Time zone is important to me for contacting you when I am at work. SCOPE: 1. Three clear lacquered shelves, poles & three dividers. 2. 5 l.f. plastic laminate upper & lower copy room cabinets (2/A802). 3. 18 l.f. plastic laminate upper pantry cabinets. 4. 7 l.f. plastic laminate lower pantry cabinets with plywood subtop for stone by others. 5. 28 l.f. plastic laminate countertop with supports & end panels. 6. 32 l.f. plywood subtops & steel supports at bathrooms for stone by others. Exclusions & Qualifications: Hardware, glass and glazing by others. Protection of millwork after installation, not in contract. Recycled glass countertops not in contract. Quartz countertops not in contract.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       
Preferred Location: North America

m****io1
 [?]
Sign in to view client's details.
| m****io1
|    United States
Hourly Rate: $15 - $20 / hr   |  Duration: 1-2 weeks  |  Posted: Apr 19, 2014  |  Ends: 10d, 20h  |   1 Proposal
ONLY DRAFTERS FROM EAST COAST OR MIDWEST SHOULD APPLY. TIME ZONE IS IMPORTANT TO ME BEING ABLE TO CONTACT YOU. SCOPE: 10th Floor 1. 8 l.f. plastic laminate upper & lower pantry cabinets (1/A800). 2. 12 l.f. plastic laminate upper copy room cabinets (2/A800). 3. 7 l.f. plastic laminate plastic laminate lower copy room cabinets (2/A800). 4. 9 l.f. plastic laminate upper & lower reception cabinets (3/A800). 5. 9 l.f. plastic laminate plastic laminate countertop (4/A800). 6. 6 l.f. plastic laminate upper cabinets (9/A800). 7. Two clear lacquered shelves & poles. 8. 203 l.f. plastic laminate convector enclosures with grilles (note #2) 9. 15 l.f. plastic laminate vanity tops with steel supports. 10. Furnish and install (31) stained wood doors & stained wood frames. Install only hardware (Type C). 11th Floor 1. 17 l.f. plastic laminate upper pantry cabinets (5/A800). 2. 14 l.f. plastic laminate lower pantry cabinets (5/A800). 3. 10 l.f. plastic laminate upper & lower pan...
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       
Preferred Location: North America

m****io1
 [?]
Sign in to view client's details.
| m****io1
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 19, 2014  |  Ends: 10d, 7h  |   7 Proposals
RE-BID: PROVIDING 20 PROTOTYPES IS NOW OPTIONAL. I'm looking for a person with a degree in Industrial Design (ID) to work on a FIXED BID project to design one of my consumer products. The FIXED BID shall lists the specific deliverables covered in the bid and include Elance charges. The ID must have expertise in product design, manufacturing, ergonomics, usability, aesthetics, surfacing, and engineering. The consumer product is a hair plug. The hair plug has two major components: ? Component 1 - a flexible polymer-encased knotted-hair fabric mesh with all hairs protruding only from one side of the mesh (an exception to this requirement is explained below) leaving the other side of the mesh bare. ? Component 2 - an adhesive patch bonded to one side of a flexible polypropylene substrate leaving the other side of the substrate bare. I'll use two approaches to manufacture the hair plug. The first approach places the responsibility on one manufacturer to produce the complete hair plug....
Category: Product Design       

P****bat
 [?]
Sign in to view client's details.
| P****bat
|    United States
Fixed Price: $100 or less   |  Posted: Apr 19, 2014  |  Ends: 25d, 6h  |   5 Proposals
Create the Robot Structural Analysis file using the attached plans. It's a 7-storey, small RC old building in Imperial Units, i.e. ft, kip (1000 lb-f), etc. For elastic analysis only, and therefore no rebar details are necessary for input. Required inputs: (1) physical dimensions of Column, beam, slab, wall, staircase, water tank (2) Live load, dead load and wind load Must be completed in 7 days. Immediate one-off payment AFTER completion of job.
Category: Civil & Structural       

m****ung
 [?]
Sign in to view client's details.
| m****ung
|    Hong Kong SAR, PRC
Fixed Price: Less than $500   |  Posted: Apr 18, 2014  |  Ends: 10d, 0h  |   10 Proposals
I have a small part designed that I would like to have a mold made. The part is slightly larger than 1 cubic inch. The mold can be made out of aluminum to save cost. It should be a simple 2 part mold, The 3D CAD file is complete, (draft needs to be factored in for molding). I will be injecting the mold with a homemade machine I created. Summary - I need CNC machine services and someone with experience in mold machining to make an inexpensive yet perfectly functional mold.
Category: Other - Engineering &...       
Skills: CNC machining       

c****tis
 [?]
Sign in to view client's details.
| c****tis
|    United States
Fixed Price: Not Sure   |  Posted: Apr 18, 2014  |  Ends: 9d, 22h  |   11 Proposals
We would like to design and manufacture a diesel monitor for marine diesel engines. The unit should monitor the amount of fuel been used. With a display the unit would show litres per hour used and total consumption. We also like to include the possabilty to be able to email results to an address. Also if we could incorporate live monitoring also?. The unit needs to be cost effective for small boats to buy. There is already plenty of expensive models on the market.
Category: Product Design       

t****sky
 [?]
Sign in to view client's details.
| t****sky
|    Ireland
Fixed Price: Less than $500   |  Posted: Apr 18, 2014  |  Ends: 9d, 22h  |   10 Proposals
I am in need of an inexpensive molding and manufacturing run of a simple item. The item measures @ 6.5 inch x 3 inch. I have attached an image that illustrates that the item is NOT solid plastic, but has open areas within these measurements. (The item resembles the letter "T" with a short leg. The leg has to be of a bendable plastic that could bend back to the Top of the "T". The center of the top of the "T" can be a rigid plastic). (2 separate plastic pieces glued together). I have an already existing Solidworks 3D file that will be sent to the winning bid for review and molding. All plastics types can be considered if they pass US import requirements for products. I have already been given initial mold pricing of ($600.00) from another company and am looking to beat that price. Assembled item pricing bid is currently at .15 cents per item. (Quantities are 5K+) If you can beat these prices by at least 20%, then please make a bid and send samples of ...
Category: Other - Engineering &...       

T****ury
 [?]
Sign in to view client's details.
| T****ury
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 18, 2014  |  Ends: 9d, 18h  |   13 Proposals
Unique LED lighting system involving product design of housing components, and some simple electronics. Project also needs to be developed for manufacturing, which may include rapid prototyping and injection molding.
Category: Product Design       

k****ens
 [?]
Sign in to view client's details.
| k****ens
|    United States
Fixed Price: $1,000 - $2,000   |  Posted: Apr 18, 2014  |  Ends: 20d, 16h  |   7 Proposals
I would like for a site to be developed and launched to facilitate car parts and accessories search based on the details of the vehicle. Further that when an inquiry is made by a customer, that the managing division of the company can view these queries via email etc to begin search and price the inquiry and then email it to the customer for purchase. (purchase option via paypal would be appropriate). Further details will follow concerning: Design Layout Logistics of Inquiries SMS Messaging to notify customer of their product tracking. Two More Aspects (Confidential)
Category: Other - Engineering &...       

d****rah
 [?]
Sign in to view client's details.
| d****rah *
|    Bahamas
Fixed Price: Less than $500   |  Posted: Apr 18, 2014  |  Ends: 9d, 17h  |   15 Proposals
I require a CAD/CAM designer that will design toy car models from a suitable 5mm plywood materials. The car will have freely moving wheels which will be attached to a motor and a battery. The drawing will be cut using a CNC laser machine and the software is TECHSOFT 2D DESIGN so they'll need to be compatible. The machine has a Red line for engraving and a black line to cut. This job is for the completion of one car model. The project has 4 phases: CAD stage, wheel stage, animation stage and sticker stage. At each stage there will be a thorough assessment of the work and I the successful designer must be willing to produce several drafts until the perfect model is produced. I need time and thought put into this project . Attached is a document explaining the project in greater detail.
Category: CAD       
Skills: 3D Modeling, AutoCAD, SolidWorks       

w****ces
 [?]
Sign in to view client's details.
| w****ces
|    United Kingdom
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 18, 2014  |  Ends: 9d, 16h  |   28 Proposals
I am working on a product design project and need the assistance of a CAD engineer to model my design and wondered when you could have it done for as I am working to a tight deadline and need it done very soon! It is a rescue aid for beach lifeguards I don`t think it will take a professional very long Thankyou Joseph
Category: CAD       
Skills: 3D Design       

j****ugh
 [?]
Sign in to view client's details.
| j****ugh
|    United Kingdom
Hourly Rate: Less than $10 / hr   |  Duration: Not Sure  |  Posted: Apr 18, 2014  |  Ends: 9d, 10h  |   6 Proposals
looking for DESIGN FOR THE MECHANICAL, ELECTRICAL, AND PLUMBING (MEP) ENGINEERING Budget is less, time and budget is tight, please reply if you are familiar with required skill and expertise. software REVITS 2013-14
Category: CAD       

j****123
 [?]
Sign in to view client's details.
| j****123 *
|    India
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 17, 2014  |  Ends: 9d, 2h  |   9 Proposals
I'm looking for a manufacturer to manufacture a small number of prototypes for a backpack design. Technical specifications have already been prepared. The only tasks needed now are: * Determine feasibility of manufacturing prototype based on technical specifications * Identifying potential suppliers and manufacturers willing to work on producing a small number of prototypes * Manufacture prototype
Category: Product Design       
Skills: Manufacturing Design       

j****ran
 [?]
Sign in to view client's details.
| j****ran
|    United States
Fixed Price: Not Sure   |  Posted: Apr 17, 2014  |  Ends: 8d, 22h  |   0 Proposals
Looking to have a site with a landing page opt-in builder that works along with aweber and getresponce. This will not use the form from aweber or getresponce but the html script for the campaign can be put into the builder for custom forms with in the landing page builder that people have to sign up and be a member to use free. Must know what you are doing. I don't want bugs forever on this thing.
Category: Product Design       
Skills: Application Programming, AWeber       

s****la2
 [?]
Sign in to view client's details.
| s****la2
|    United States
Hourly Rate: $20 - $30 / hr   |  Duration: Not Sure  |  Posted: Apr 17, 2014  |  Ends: 8d, 22h  |   5 Proposals
Need someone with AGTEK Earthworks 4D to create an earthwork estimate. It is for a roadway and we will need cut / fill quantities plus a model shown on google earth.
Category: Civil & Structural       
Skills: 3D Modeling, Architecture, Civil Engineering       

t****tph
 [?]
Sign in to view client's details.
| t****tph
|    United States
Hourly Rate: Not Sure   |  Duration: Not Sure  |  Posted: Apr 17, 2014  |  Ends: 8d, 20h  |   13 Proposals
We need assistance in designing our Landscape, Deck, Patio, outdoor kitchen, irrigation system and do storm water management. We also would like to extend our driveway and install fence. I am looking for an expert, who can help us design and show 3D renderings to visualize.
Category: CAD       
Skills: 3D Modeling, ArchiCAD, Architecture, SolidWorks       

a****oup
 [?]
Sign in to view client's details.
| a****oup
|    United States
Hourly Rate: $10 - $15 / hr   |  Duration: 3-4 weeks  |  Posted: Apr 17, 2014  |  Ends: 8d, 18h  |   1 Proposal
I am launching a network marketing company that will have 3 categories of products. 1. Body Shaping men's and women's wear like Spanx, sample attached, therefore I need someone who can source these garments from the material, as an example 72% polyamide 28% elastane and body suit, 61 % poliamde 33% cotton 6 elastone, to the manufacturer to the shipping, quantities for break points etc. The same would for the other 2 categories, 2. nutritional supplements like MSM and 3. personal care items like eye creams and lotions. I need a document that shows me step by step what I need to do from sourcing to selling these products.
Category: Product Design       

D****ats
 [?]
Sign in to view client's details.
| D****ats
Fixed Price: Not Sure   |  Posted: Apr 17, 2014  |  Ends: 8d, 16h  |   4 Proposals
Inviting professionals of experienced and certified Six Sigma (Black Belt level) professionals to develop Video content for the Six Sigma Black Belt certification training (as per ASQ Six Sigma Black Belt Body of Knowledge). Content needs to be in line with the latest exam structure, and will include all necessary concepts in the form of a) Videos: Need to provide 10-15 hours of video content b) Flash Cards: Min. 500. These are of a flip-type concept-definition format c) Section tests: 1 test (with ~30 questions) per topic/section d) Mock Exams: 4 sets as per the latest exam format e) Tool Kits: Spreadsheet/Powerpoint/Word based templates for Six Sigma Black Belts (minimum 15) The videos also needs to include suitable animations/animation ideas for which need to form minimum 30% of the overall content coverage.Bids will be evaluated on price, quality, and delivery time-frame. Please respond to this post to apply. Preference will be given to experts from US and UK. Also, please sha...
Category: Other - Engineering &...       
Skills: Manufacturing Design, Lean       

L****are
 [?]
Sign in to view client's details.
| L****are
|    India
Hourly Rate: $10 - $15 / hr   |  Duration: Not Sure  |  Posted: Apr 17, 2014  |  Ends: 8d, 9h  |   5 Proposals
I am looking for an individual that will test a logical quiz meant for employees. This is proprietary software that will require confidentiality agreement. The quiz willbe less than 60 questions. The successful candidate will be able to Solve puzzles swiftly Have a mathematical capacity up to including Calculus Have a very good understanding of the English Language Must be able to finish the quiz within a set time Must have some sort of programming knowledge Have locomotive knowledge Geometry Score high on previous IQ tests (not a measure of intelligence) with proof Provides adequate constructive feedback Can provide insights and ideas that are though provoking This task will be overseen by 2 programmers for a reputable Canadian company. If the individual understands, completes, scores high and provides constructive feedback there will be further requests from the individual up to and including full time employment. Thanks
Category: Other - Engineering &...       

c****sp1
 [?]
Sign in to view client's details.
| c****sp1 *
|    United States
Symbol Key
Payment method not yet verified
Payment verified
Purchased $1-$500
Purchased $500-$5,000
Purchased more than $5,000
You have already submitted a
proposal to this job